WS-SW-IF-MIB
AI MIB Summary
The WS-SW-IF-MIB module provides SNMP access to interface statistics, operational states, and configuration parameters for wireless switch network interfaces. It enables the monitoring of link status, traffic counters, and error metrics specifically within the wireless switching infrastructure.
WS IF Module
Main OID:
wsIfModule.1.3.6.1.4.1.388.14.2.4.1
36
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
wsIfModuleWS IF Module MODULE-IDENTITY .1.3.6.1.4.1.388.14.2.4.1 |
wsIfTablews IF table SEQUENCE OF WsIfEntry .1.3.6.1.4.1.388.14.2.4.1.1 |
wsIfEntryws IF table entry WsIfEntry .1.3.6.1.4.1.388.14.2.4.1.1.1 |
wsIfHWTypews IF hardware typero Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.1 |
wsIfNumberws IF numberro INTEGER .1.3.6.1.4.1.388.14.2.4.1.1.1.2 |
wsIfMTUws IF MTU, read/writerw Integer32 .1.3.6.1.4.1.388.14.2.4.1.1.1.3 |
wsIfSpeedws IF speedro Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.4 |
wsIfAdminSpeedws IF speed, read/write, not applicable in vlanrw Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.5 |
wsIfDuplexws IF duplexro Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.6 |
wsIfAdminDuplexws IF duplex, read/write, not applicable in vlanrw Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.7 |
wsIfDHCPEnablews IF DHCP enable, read/writerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.8 |
wsIfIndexif Index numberro Integer32 .1.3.6.1.4.1.388.14.2.4.1.1.1.9 |
wsIfTypews if type, specify it is layer 2 or layer 3 interfacero Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.10 |
wsIfNamews if name, a display stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.11 |
wsIfRowStatusrow status, only createAndGo, destroy, active are supported,
and only create a vlan is supportedrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.12 |
wsIfDescrDescription.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.13 |
wsIfMaxSpeedDescription.ro Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.14 |
wsIfMgmtAllowedindicates if this interface is available for mgmt portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.15 |
wsIfMedTypethe current port medium typero Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.16 |
wsIfMedTypeSupportedthe possilbe option for the current port med type supportedro Enumeration .1.3.6.1.4.1.388.14.2.4.1.1.1.17 |
wsIfVlanMappingAllowedindicate if vlan mapping is allowed on this portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.18 |
wsIfStaticLinkAggMembershipAllowedThis field indicates if this port can become a member of a static link aggregate.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.1.1.19 |
wsIfStaticLinkAggIf non-zero, indicates the static link aggregate this port is a member of.rw INTEGER .1.3.6.1.4.1.388.14.2.4.1.1.1.20 |
wsIfMgmtIfnamemgmt interface name of this platformrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.2 |
wsIfRonIfNameRon interface name of this platform.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.3 |
wsIfWlanIfNameonly applied in whistlerrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.4 |
wsIfMgmtOptionsDescribe what choice are available in the current platform. For whistler/monarch,
it is vlanOnly(1).For quicksilver, it is both(3)ro Enumeration .1.3.6.1.4.1.388.14.2.4.1.5 |
wsIfMgmtOptionStateDescribe what choice are in effect in the current platform. For whistler/monarch/quicksilver,
this attribute is read-only, setting it will get a GEN_ERR response. For whislter/monarch,
the value is vlanOnly(1). For quicksilver, the value is both(3)rw Enumeration .1.3.6.1.4.1.388.14.2.4.1.6 |
wsIfMedDefaultThe default medium for the port. Only writable in quick silver. In whislter/monarch,
write it will return a GEN_ERR.rw Enumeration .1.3.6.1.4.1.388.14.2.4.1.7 |
wsIfMedDefaultSupportedthe possible option for default med type supportedro Enumeration .1.3.6.1.4.1.388.14.2.4.1.8 |
wsIfMaxStaticLinkAggThe maximum number of static link aggregates supported.ro INTEGER .1.3.6.1.4.1.388.14.2.4.1.9 |
wsIfManagementSecureWhen this object is set to true, the management traffic is allowed
only through the management port on the switch. When this object is
set to false, the management traffic is allowed through any port on
the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.10 |
wsIfSwitchMacAddressThe MAC address of the interface representative of this wireless switch.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.4.1.11 |
wsIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.4.1.100 |
wsIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.4.1.100.1 |
wsIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.4.1.100.2 |
More MIBs from Symbol
Browse all SymbolMIBs →SYMBOL-WS5000-MIB
SNMP MIB module
1749 objects→
SYMBOL-CC-WS2000-MIB
Standard SNMP MIB module defining data structures for SYMBOL-CC-WS2000-MIB.
1436 objects→
SYMBOL-AP-MIB
Standard SNMP MIB module defining data structures for SYMBOL-AP-MIB.
1185 objects→
WS-CC-RF-MIB
SNMP MIB module
820 objects→
WS-CC-STATS-MIB
The WS-CC-STATS-MIB module provides SNMP access to real-time performance counters and statistical metrics for Cisco Web Security Appliance (WSA) traffic processing, including session throughput, connection states, and protocol-specific event counts. This MIB enables network operators to monitor the operational health and load distribution of web proxy services and content filtering engines without requiring direct CLI access to the appliance.
675 objects→
SYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB
Standard SNMP MIB module defining data structures for SYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB.
315 objects→