WLSX-USER6-MIB
AI MIB Summary
The WLSX-USER6-MIB module enables monitoring of IPv6 user session attributes and status on Aruba wireless LAN controllers. It facilitates the retrieval of specific IPv6 user data points, such as active sessions and associated interface details, for network management and troubleshooting.
This MIB module defines MIB objects which provide information about the IPv6 users in an Aruba controller.
Main OID:
wlsxUser6MIB.1.3.6.1.4.1.14823.2.2.1.14
70
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
wlsxUser6InfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.4 |
wlsxSwitchUser6TableThis Table lists all the users (both wired and wireless) currently
connected to the switch. Users are identified by their IP address. SEQUENCE OF MxSwitchUser6Entry .1.3.6.1.4.1.14823.2.2.1.1.4.1 |
wlsxSwitchUser6EntryUser Entry MxSwitchUser6Entry .1.3.6.1.4.1.14823.2.2.1.1.4.1.1 |
user6IpAddressIPv6 Address from which the user connected to the switch. DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.1 |
user6PhyAddressPhysical Address of the station from which the user connected to
the switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.2 |
user6NameName of the User.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.3 |
user6RoleThe Role configured for this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.4 |
user6UpTimeTime since the user is connected to the switch.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.5 |
user6AuthenticationMethodAuthentication mechanism used by the user to connect to the switch.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.6 |
user6LocationLocation of the access point (in Building.Floor.... format), which
the user used to connect to the switch.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.7 |
user6ServerNameName of the Back-end authentication server, used to authenticate
the user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.8 |
user6ConnectedVlanVlan on which the user is connected to the switch.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.9 |
user6ConnectedSlotSlot on switch, where the user connection terminates.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.10 |
user6ConnectedPortPort on switch, where the user connection terminates.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.11 |
user6BWContractNameName of the Bandwidth Contract applied to this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.12 |
user6BWContractUsageIndicates how the Bandwidth Contract is used.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.13 |
user6ConnectedModuleModule on switch, where the user connection terminates.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.4.1.1.14 |
wlsxUser6MIBThis MIB module defines MIB objects which provide
information about the IPv6 users in an Aruba controller. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.2.1.14 |
wlsxUser6AllInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.14.1 |
wlsxTotalNumOfUsers6Total Number of the users.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.14.1.1 |
wlsxUser6TableThis Table lists all the users (both wired and wireless) currently
connected to the controller. Users are identified by their MAC
address and IP address. SEQUENCE OF WlsxUser6Entry .1.3.6.1.4.1.14823.2.2.1.14.1.2 |
wlsxUser6EntryUser Entry WlsxUser6Entry .1.3.6.1.4.1.14823.2.2.1.14.1.2.1 |
nUser6PhyAddressMAC address of the station from which the user connected to
the controller. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.1 |
nUser6IpAddressIPv6 Address of the user. DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.2 |
nUser6NameName of the User.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.3 |
nUser6RoleThe Role configured for this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.4 |
nUser6UpTimeTime since the user connected to the controller.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.5 |
nUser6AuthenticationMethodAuthentication mechanism used by the user to connect to the
controller.ro ArubaAuthenticationMethods (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.6 |
nUser6SubAuthenticationMethodSub Authentication Methodro ArubaSubAuthenticationMethods (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.7 |
nUser6AuthServerNameName of the authentication server used to authenticate
the user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.8 |
nUser6ExtVPNAddressExternal VPN IP Address, if this is a VPN user or 0.0.0.0 if not.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.9 |
nUser6ApLocationLocation of the access point to
which the user is associated.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.10 |
nUser6ApBSSIDBSSID of the access point, which
the user used to connect to the controller.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.11 |
nUser6IsOnHomeAgentThe Object will indicate if the controller is the home controller
for the user or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.12 |
nUser6HomeAgentIpAddressThe Home agent IP Address of the user. If this user is already on
the home controller, then this IP is the controller IP else it
is the home controller IP address.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.13 |
nUser6MobilityStatusThe Mobility Status of the User.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.14 |
nUser6HomeVlanHome VLAN of the User. If the user is on the home controller
then this VLAN will be same as userDefaultVlan.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.15 |
nUser6DefaultVlanDefault VLAN of the User based on the AP configuration.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.16 |
nUser6AssignedVlanThis Vlan will be different from the Default VLAN if the user has
a derived VLAN Configuration.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.17 |
nUser6BWContractNameName of the Bandwidth Contract applied to this user.rodeprecated DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.18 |
nUser6BWContractUsageIndicates how the Bandwidth Contract is used.rodeprecated Enumeration .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.19 |
nUser6BWContractIdBandwidth Contract Id Assigned to the Userrodeprecated Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.20 |
nUser6IsProxyArpEnabledThis object will indicate if the controller is proxy ARPing for the
user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.21 |
nUser6CurrentVlanThe VLAN to which the user is currently bound.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.22 |
nUser6IsWiredIndicates whether this is a wired or wireless user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.23 |
nUser6ConnectedSlotThe slot to which the user is connected, if wired.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.24 |
nUser6ConnectedPortThe port to which the user is connected, if wired.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.25 |
nUser6PhyTypeThe wireless PHY type to which the user is associated, or 'wired'.ro ArubaPhyType (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.26 |
nUser6MobilityDomainNameThe name of mobility domain mobile user belongs to.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.27 |
nUser6UPBWContractNameName of the Upstream Bandwidth Contract applied to this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.28 |
nUser6UPBWContractUsageIndicates how the Upstream Bandwidth Contract is used.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.29 |
nUser6UPBWContractIdUpstream Bandwidth Contract Id Assigned to the Userro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.30 |
nUser6DNBWContractNameName of the Downstream Bandwidth Contract applied to this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.31 |
nUser6DNBWContractUsageIndicates how the Downstream Bandwidth Contract is used.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.32 |
nUser6DNBWContractIdDownstream Bandwidth Contract Id Assigned to the Userro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.33 |
nUser6HTModeThe HT mode of this user, if any.ro ArubaHTMode (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.34 |
nUser6DeviceIDDevice IDro DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.35 |
nUser6DeviceTypeDevice Typero DisplayString .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.36 |
nUser6ConnectedModuleThe module to which the user is connected, if wired.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.37 |
nUser6RxDataPkts64This object specifies number of packets received by this IP
for which this user is connected to the controller.ro Counter64 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.38 |
nUser6TxDataPkts64This object specifies number of packets transmitted by this IP
for which this user is connected to the controller.ro Counter64 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.39 |
nUser6RxDataOctets64This object specifies number of octets received by this IP
for which this user is connected to the controller.ro Counter64 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.40 |
nUser6TxDataOctets64This object specifies number of octets transmitted by this IP
for which this user is connected to the controller.ro Counter64 .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.41 |
nUser6ForwardModeForward mode.ro ArubaUserForwardMode (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.42 |
nUser6EncryptionMethodEncryption method.ro ArubaEncryptionType (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.43 |
nVIAUser6DeviceIDMAC address of the station from which the user connected to
the controller using VIA.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.14.1.2.1.44 |
wlsxUser6SessionTimeTableThis table lists the user session time counts on an ESSID.
ssid. The session times are separated into predefined time length
buckets, with sessions lasting longer than 240 minutes falling into
the 240min bucket. SEQUENCE OF WlsxUser6SessionTimeEntry .1.3.6.1.4.1.14823.2.2.1.14.1.3 |
wlsxUser6SessionTimeEntryUser session time data, divided into buckets of different
time length. WlsxUser6SessionTimeEntry .1.3.6.1.4.1.14823.2.2.1.14.1.3.1 |
wlsxUser6SessionTimeLengthPre-defined user session time length. Integer32 .1.3.6.1.4.1.14823.2.2.1.14.1.3.1.1 |
wlsxUser6SessionTimeCountNumber of users that are connected to the essid whose sessions expired in this time interval.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.14.1.3.1.2 |