WLSX-SWITCH-MIB
This MIB module defines MIB objects which provide System level information about the Aruba switches.
Main OID:
wlsxSwitchMIB.1.3.6.1.4.1.14823.2.2.1.1
198
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
198 total| Object Name |
|---|
wlsxSwitchMIBThis MIB module defines MIB objects which provide System level information about the Aruba switches. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.2.1.1 |
wlsxSystemXGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.1 |
wlsxHostnameName of the switch.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.1.1 |
wlsxModelNameModel Name of the switch.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.1.2 |
wlsxSwitchIpSwitch IP as configured by the user. This IP address uniquely identifies the switch.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.1.3 |
wlsxSwitchRoleRole of this switch in the Switch Domain.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.1.4 |
wlsxSwitchMasterIpMaster IP of the switchro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.1.5 |
wlsxSwitchListTableThis Table will list all the switches in the Switch Domain. It will be populated only on the master switch. Local switches return empty table. SEQUENCE OF MxSwitchListEntry .1.3.6.1.4.1.14823.2.2.1.1.1.6 |
wlsxSwitchListEntrySwitch List Entry MxSwitchListEntry .1.3.6.1.4.1.14823.2.2.1.1.1.6.1 |
switchListSwitchIPAddressIP Address of the switch. IpAddress .1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1 |
switchListSwitchRoleRole of the Switch.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2 |
wlsxSwitchLicenseCountThe number of licenses installed on the switchro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.7 |
wlsxSwitchLicenseTableThis table lists all licenses installed on the switch. SEQUENCE OF LicenseEntry .1.3.6.1.4.1.14823.2.2.1.1.1.8 |
wlsxLicenseEntryLicense Entry LicenseEntry .1.3.6.1.4.1.14823.2.2.1.1.1.8.1 |
licenseIndexLicense ID number Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1 |
licenseKeyLicense Keyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2 |
licenseInstalledLicense installation timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3 |
licenseExpiresLicense expiry timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4 |
licenseFlagsLicense flags; E - enabled; A - auto-generated; R - reboot required to activatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 |
licenseServiceThe service enabled by this license.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6 |
wlsxSysXProcessorTableThe table of processors contained by the switch. SEQUENCE OF WlsxSysXProcessorEntry .1.3.6.1.4.1.14823.2.2.1.1.1.9 |
wlsxSysXProcessorEntryAn entry for one processor contained by the switch. WlsxSysXProcessorEntry .1.3.6.1.4.1.14823.2.2.1.1.1.9.1 |
sysXProcessorIDProcessor Index. Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1 |
sysXProcessorDescrdescription of the processor.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2 |
sysXProcessorLoadThe average, over the last minute, of the percentage of time that this processor was not idle.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3 |
wlsxSysXStorageTableThe table of Storage-devices contained by the switch. SEQUENCE OF WlsxSysXStorageEntry .1.3.6.1.4.1.14823.2.2.1.1.1.10 |
wlsxSysXStorageEntryAn entry for one long-term storage device contained by the switch. WlsxSysXStorageEntry .1.3.6.1.4.1.14823.2.2.1.1.1.10.1 |
sysXStorageIndex Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1 |
sysXStorageTypero Enumeration .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2 |
sysXStorageSizesize of the storage filesystem in MB.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3 |
sysXStorageUsedsize of the storage filesystem in MB.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4 |
sysXStorageNamename of the storage filesystem.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5 |
wlsxSysXMemoryTableThe memory status of the switch SEQUENCE OF WlsxSysXMemoryEntry .1.3.6.1.4.1.14823.2.2.1.1.1.11 |
wlsxSysXMemoryEntryAn entry for one memory region on the switch. Currently, only the CP region is monitored. WlsxSysXMemoryEntry .1.3.6.1.4.1.14823.2.2.1.1.1.11.1 |
sysXMemoryIndex Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 |
sysXMemorySizeTotal memory in KB.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2 |
sysXMemoryUsedUsed memory in KB.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3 |
sysXMemoryFreeFree memory in KB.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 |
wlsxSwitchLicenseSerialNumberThe license serial number of the switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.1.12 |
wlsxUserInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.2 |
wlsxSwitchUserTableThis Table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their IP address. SEQUENCE OF MxSwitchUserEntry .1.3.6.1.4.1.14823.2.2.1.1.2.1 |
wlsxSwitchUserEntryUser Entry MxSwitchUserEntry .1.3.6.1.4.1.14823.2.2.1.1.2.1.1 |
userIpAddressIP Address from which the user connected to the switch. IpAddress .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1 |
userPhyAddressPhysical Address of the station from which the user connected to the switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2 |
userNameName of the User.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3 |
userRoleThe Role configured for this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4 |
userUpTimeTime since the user is connected to the switch.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5 |
userAuthenticationMethodAuthentication mechanism used by the user to connect to the switch.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6 |
userLocationLocation of the access point (in Building.Floor.... format), which the user used to connect to the switch.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7 |
userServerNameName of the Back-end authentication server, used to authenticate the user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8 |
userConnectedVlanVlan on which the user is connected to the switch.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9 |
userConnectedSlotSlot on switch, where the user connection terminates.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10 |
userConnectedPortPort on switch, where the user connection terminates.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11 |
userBWContractNameName of the Bandwidth Contract applied to this user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12 |
userBWContractUsageIndicates how the Bandwidth Contract is used.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13 |
userConnectedModuleThe module to which the user is connected, if wired.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14 |
wlsxSwitchStationMgmtTableThis Table lists all the wireless stations associated with the Access points connected to this switch. SEQUENCE OF MxSwitchStationMgmtEntry .1.3.6.1.4.1.14823.2.2.1.1.2.2 |
wlsxSwitchStationMgmtEntryStation Management Entry MxSwitchStationMgmtEntry .1.3.6.1.4.1.14823.2.2.1.1.2.2.1 |
staPhyAddressThe Physical Address of the Station. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1 |
staAccessPointBSSIDBSSID of the Access point through which the station is connected to the switch MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2 |
staUserNameName of the User connecting from this station.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3 |
staUserRoleUser Role.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4 |
staAssociationIDAID with which the Station is associated with this system.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5 |
staAccessPointESSIDESSID of the Access pointro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6 |
staSignalToNoiseRatioSNR for the BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 |
staTransmitRateIndicates Transmit rate of the channelro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8 |
staReceiveRateIndicates Receive rate of the channelro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9 |
wlsxSwitchStationStatsTableThis Table lists the statistics of all the wireless stations associated with the Access points connected to this switch. SEQUENCE OF MxSwitchStationStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.2.3 |
wlsxSwitchStationStatsEntryStation Statistics Entry MxSwitchStationStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.2.3.1 |
staTxPacketsTotal Packets Transmitted by the station.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1 |
staTxBytesTotal Bytes Transmitted by the station.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2 |
staRxPacketsTotal Packets Received by the Stationro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3 |
staRxBytesTotal Bytes Received by the station.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4 |
staBwRateBandwidth Rate in Kbps of the station.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5 |
staFrameRetryRateStation Frame Retry Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6 |
staFrameLowSpeedRateStation Frame Low Speed Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7 |
staFrameNonUnicastRateStation Frame Non Unicast Packet Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8 |
staFrameFragmentationRateStation Frame Fragmentation Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9 |
staFrameReceiveErrorRateStation Frame Receive Error Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10 |
wlsxAccessPointInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.3 |
wlsxSwitchTotalNumAccessPointsTotal Number of Access Points Connected to this switch.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.1.3.1 |
wlsxSwitchTotalNumStationsAssociatedTotal Number of Stations Associated to this switch.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.1.3.2 |
wlsxSwitchAccessPointTableThis Table lists all the Access Points Connected to this switch. SEQUENCE OF MxSwitchAccessPointEntry .1.3.6.1.4.1.14823.2.2.1.1.3.3 |
wlsxSwitchAccessPointEntryStation Management Entry MxSwitchAccessPointEntry .1.3.6.1.4.1.14823.2.2.1.1.3.3.1 |
apBSSIDThe Physical Address of the Access Point. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1 |
apESSIDESSID of the Access Pointro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2 |
apSlotSlot to which the Access Point is connected.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3 |
apPortPort to which the Access Point is connected.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4 |
apIpAddressAddress of the Access Point.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5 |
apPhyTypePhysical Layer Protocol support of the AP.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 |
apTypeIndicates whether the Access point is an Air Monitor or regular AP.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 |
apCurrentChannelThe Current Operating frequency channel.ro INTEGER .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 |
apLocationLocation of the AP defined in Building.Floor.... mode.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 |
apTotalTimeTime since the Ap is connected to the switchro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10 |
apInactiveTimeTime since the Ap has been inactivero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11 |
apLoadBalancingIndicates whether Load balancing is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12 |
apChannelNoiseIndicates the noise on the channelro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13 |
apSignalToNoiseRatioSNR for the BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14 |
apTransmitRateIndicates Transmit rate of the channelro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15 |
apReceiveRateIndicates Receive rate of the channelro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16 |
wlsxSwitchGlobalAPTableThis Table lists all the Access Points Connected in the Switch Domain. This table is valid only on a Master switch. On a Local switch, the table is empty.deprecated SEQUENCE OF MxSwitchGlobalAPEntry .1.3.6.1.4.1.14823.2.2.1.1.3.4 |
wlsxSwitchGlobalAPEntryStation Management Entrydeprecated MxSwitchGlobalAPEntry .1.3.6.1.4.1.14823.2.2.1.1.3.4.1 |
globalAPLocationPhysical Location of the AP, defined in Building.Floor.Location format.deprecated DisplayString .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 |
globalAPAddressAddress of the Access Point.deprecated IpAddress .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 |
globalAPLocalSwitchIP Address of the Local Switch this Access Point is connected to.rodeprecated IpAddress .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 |
globalAPdot11aPhyAddrPhysical Mac address of the module supporting dot11a in the Access Point. AP can have support for both dot11a and dot11b physical layer.rodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 |
globalAPdot11bPhyAddrPhysical Mac address of the module supporting dot11b in the Access Point. AP can have support for both dot11a and dot11b physical layer.rodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 |
globalAPStateState of the AP. 1 -- AP is UP. 2 -- AP is DOWN. 3-7 -- Values are deprecated.rodeprecated INTEGER .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 |
globalAPdot11gPhyAddrPhysical Mac address of the module supporting dot11g in the Access Point. AP can have support for both a,b,g physical layer.rodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7 |
wlsxSwitchAccessPointStatsTableThis Table lists the statistics of all the Access Points Connected to this switch. SEQUENCE OF MxSwitchAccessPointStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.3.5 |
wlsxSwitchAccessPointStatsEntryAp Stats Entry. MxSwitchAccessPointStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.3.5.1 |
apStatsChannelChannel on which the ap is operating.ro INTEGER .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1 |
apChannelBwRateBandwidth Rate in Kbps of the apChannel.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 |
apChannelFrameRetryRateAp Channel Frame Retry Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3 |
apChannelFrameLowSpeedRateAp Channel Frame Low Speed Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4 |
apChannelFrameNonUnicastRateAp Channel Frame Non Unicast Packet Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5 |
apChannelFrameFragmentationRateAp Channel Frame Fragmentation Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6 |
apChannelFrameReceiveErrorRateAp Channel Frame Receive Error Rate.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 |
apBSSTxPacketsTotal Packets Transmitted by the ap on this BSSID.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8 |
apBSSTxBytesTotal Bytes Transmitted by the ap on this BSSID.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 |
apBSSRxPacketsTotal Packets Received by the ap on this BSSIDro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 |
apBSSRxBytesTotal Bytes Received by the ap on this BSSID.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11 |
apBSSBwRateBandwidth Rate in Kbps of the ap on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12 |
apBSSFrameRetryRateFrame Retry Rate on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13 |
apBSSFrameLowSpeedRateFrame Low Speed Rate on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14 |
apBSSFrameNonUnicastRateFrame Non Unicast Packet Rate on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15 |
apBSSFrameFragmentationRateFrame Fragmentation Rate on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16 |
apBSSFrameReceiveErrorRateFrame Receive Error Rate on this BSSID.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 |
wlsxSwitchTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.100 |
wlsxSwitchTrapObjectsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.1.100.100 |
wlsxAuthServerNameThis Object is used in the traps to indicate the Authentication Server, used for Authentication.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.1 |
wlsxAuthServerTimeoutThis Object is used in the traps to indicate the Authentication Server Timeout.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.2 |
wlsxFanNumberThis Object is used in the traps to indicate a failing fan number.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.4 |
wlsxLineCardNumberThis Object is used in the traps to indicate a Line Card in the switch.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.5 |
wlsxVoltageTypeThis Object is used in the traps to indicate the type of the voltage.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.6 |
wlsxVoltageValueThis Object is used in the traps to indicate the voltage value in Float.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.7 |
wlsxTemperatureValueThis Object is used in the traps to indicate Temperature Value.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.8 |
wlsxProcessNameThis Object is used in the traps to indicate a process name.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.9 |
wlsxStationMacAddressThe Physical Address of the Station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.100.100.10 |
wlsxStationBlackListReasonThe Reason for which a station is black listed.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.100.100.11 |
wlsxSpoofedIpAddressThis Object is used in a trap to identify a Spoofed IP Address.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.12 |
wlsxSpoofedOldPhyAddressThis Object is used in a trap to identify a Old Mac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.100.100.13 |
wlsxSpoofedNewPhyAddressThis Object is used in a trap to identify a New Mac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.1.100.100.14 |
wlsxDBNameThis Object is used in a trap to identify name of the Database.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.15 |
wlsxDBUserNameThis Object is used in a trap to identify name of the Database user.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.16 |
wlsxDBIpAddressThis Object is used in a trap to identify the IpAddress of the DB.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.17 |
wlsxDBTypeThis Object is used in a trap to identify the Port of the user.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.100.100.18 |
wlsxVrIDThis Object contains the Virtual Router Identifier.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.19 |
wlsxVrMasterIpThis Object contains the Master IP address.ro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.20 |
wlsxVrrpOperStateThis Object represents the VRRP operational state.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.1.100.100.21 |
wlsxApTxPowerThis Object contains the value of the AP Transmit Power.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.22 |
wlsxESIServerGrpNameThis Object represents the External Services Interface (ESI) Server Group namero DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.23 |
wlsxESIServerNameThis Object represents the External Services Interface (ESI) Server namero DisplayString .1.3.6.1.4.1.14823.2.2.1.1.100.100.24 |
wlsxESIServerIpaddressThis Object represents the External Services Interface (ESI) Server IP Addressro IpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.25 |
wlsxLicenseDaysRemainingThis Object represents number of the days remaining prior to a license expiryro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.26 |
wlsxSlotNumberThis Object is used in the traps to indicate a Line Card in the switch. This value matches the value of sysExtCardSlot.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.1.100.100.27 |
wlsxSwitchIPChangedA trap which indicates that the switch IP address has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1001 |
wlsxSwitchRoleChangeA trap which indicates that the role of the switch has changed in the Domain. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1002 |
wlsxUserEntryCreatedA trap which indicates that a New user is created. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1003 |
wlsxUserEntryDeletedA trap which indicates that a user is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1004 |
wlsxUserEntryAuthenticatedA trap which indicates that a user is Authenticated. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1005 |
wlsxUserEntryDeAuthenticatedA trap which indicates that a user is Deauthenticated. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1006 |
wlsxUserAuthenticationFailedA trap which indicates that a user authentication has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1007 |
wlsxAuthServerReqTimedOutA trap which indicates that the authentication server request timed out. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1008 |
wlsxAuthServerTimedOutA trap which indicates that the authentication server timed out. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1009 |
wlsxAuthServerIsUpA trap which indicates that the authentication server is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1010 |
wlsxAuthMaxUserEntriesA trap which indicates that the User Entries table is full and cannot add any more entries. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1011 |
wlsxAuthMaxAclEntriesA trap which indicates that the Acl Entries table is full and cannot add any more entries. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1012 |
wlsxAuthMaxBWContractsA trap which indicates that the switch reached the maximum number of configurable Bandwidth contracts. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1013 |
wlsxPowerSupplyFailureA trap which indicates that the power supply has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1014 |
wlsxFanFailureA trap which indicates that the fan has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1015 |
wlsxOutOfRangeVoltageA trap which indicates that the switch received out of range voltage. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1016 |
wlsxOutOfRangeTemperatureA trap which indicates that the Temperature is out of bounds. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1017 |
wlsxLCInsertedA trap which indicates that a Line card is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1018 |
wlsxSCInsertedA trap which indicates that a supervisory card is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1019 |
wlsxGBICInsertedA trap which indicates that a GBIC is inserted in a line card. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1020 |
wlsxProcessDiedA trap which indicates that a process has died. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1021 |
wlsxProcessExceedsMemoryLimitsA trap which indicates that a process is consuming large amounts of memory. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1022 |
wlsxLowOnFlashSpaceA trap which indicates that the switch is running low on flash space. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1023 |
wlsxLowMemoryA trap which indicates that the system free memory is low. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1024 |
wlsxFanTrayRemovedA trap which indicates that the fan tray is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1025 |
wlsxFanTrayInsertedA trap which indicates that the fan tray is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1026 |
wlsxLCRemovedA trap which indicates that a Line card is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1027 |
wlsxSCRemovedA trap which indicates that a supervisory card is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1028 |
wlsxPowerSupplyMissingA trap which indicates that the power supply is missing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1029 |
wlsxAccessPointIsUpA trap which indicates that an Access point at Location apLocation and Address apIpAddress is up.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1030 |
wlsxAccessPointIsDownA trap which indicates that an Access point at Location apLocation and Address apIpAddress is down.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1031 |
wlsxCoverageHoleDetectedA trap which indicates that an Access point at Location apLocation and Address apIpAddress has detected a Coverage Hole. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1032 |
wlsxChannelChangedA trap which indicates that an Access point at Location apLocation and Address apIpAddress has changed the channel to apCurrentChannel.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1033 |
wlsxStationAddedToBlackListA trap which indicates that a station with address wlsxStationMacAddress is black listed for wlsxStationBlackListReason reason. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1034 |
wlsxStationRemovedFromBlackListA trap which indicates that a station with address wlsxStationMacAddress is removed from black list. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1035 |
wlsxIpSpoofingDetectedA trap indicating that the switch detected IP Spoofing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1036 |
wlsxDBCommunicationFailureA trap to indicate that communication with Database failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1037 |
wlsxVrrpStateChangeA trap which indicates that VRRP State has changed on the switch. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1038 |
wlsxAPRadioAttributesChangedA trap which indicates changes in the Radio attributes of an Access Point at location apLocation and address apIpAddress. Ap channel is apCurrentChannel, and Transmit power is apTxPower. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1039 |
wlsxESIServerUpA trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1040 |
wlsxESIServerDownA trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1041 |
wlsxLicenseExpiryA trap which indicates that one or more licenses on the switch will expire in <wlsxLicenseDaysRemaining> days NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.1.100.1042 |