WLSX-TRAP-MIB
AI MIB Summary
The WLSX-TRAP-MIB module defines the structure for network event notifications and asynchronous alerts generated by the switch, enabling monitoring systems to detect and process specific hardware or software state changes. It facilitates the transmission of critical operational data, such as link status transitions, authentication failures, and resource threshold breaches, to an SNMP management station for real-time fault analysis.
This MIB defines the Traps generated by the switch.
Main OID:
wlsrTrapMIB.1.3.6.1.4.1.14823.2.3.1.11
399
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
399 total| Object Name |
|---|
wlsrTrapMIBThis MIB defines the Traps generated by the switch. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.3.1.11 |
wlsxTrapsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.11.1 |
wlsxTrapObjectsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.11.1.1 |
wlsxTrapAPMacAddressThis object is used in the traps to indicate the wired MAC address of an access point, for which the trap is being raised.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.1 |
wlsxTrapAPIpAddressThis object is used in the traps to indicate the IP address of an access point, for which the trap is being raised.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.2 |
wlsxTrapAPBSSIDThis object is used in the traps to indicate the BSSID of the access point, for which the trap is being raised.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.3 |
wlsxTrapEssidThis object is used in the traps to indicate the SSID of the access point, for which the trap is being raised.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.4 |
wlsxTrapTargetAPBSSIDThis object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.5 |
wlsxTrapTargetAPSSIDThis object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.6 |
wlsxTrapTargetAPChannelThis object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an air monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.7 |
wlsxTrapNodeMacThis object is used in the traps to indicate the MAC address of a node.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.8 |
wlsxTrapSourceMacThis object is used in the traps to indicate the MAC address of the source.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.9 |
wlsxReceiverMacThis object is used in the traps to indicate the MAC address of the receiver.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.10 |
wlsxTrapTransmitterMacThis object is used in the traps to indicate the MAC address of the transmitter.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.11 |
wlsxTrapReceiverMacThis object is used in the traps to indicate the MAC address of the receiver.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.12 |
wlsxTrapSnrThis object is used in the traps to indicate the Signal to Noise ratio.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.13 |
wlsxTrapSignatureNameThis object is used in the traps to indicate the Signature Name.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.14 |
wlsxTrapFrameTypeThis object is used in the traps to indicate the Frame Typero ArubaFrameType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.15 |
wlsxTrapAddressTypeThis object is used in the traps to indicate the Address type.ro ArubaAddressType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.16 |
wlsxTrapAPLocationThis object is used in the traps to indicate the Location of the AP.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.17 |
wlsxTrapAPChannelThis object is used in the traps to indicate the Current Channel.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.18 |
wlsxTrapAPTxPowerThis object is used in the traps to indicate the AP Transmit Power.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.19 |
wlsxTrapMatchedMacThis object is used in the traps to indicate the MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.20 |
wlsxTrapMatchedIpThis object is used in the traps to indicate the IP addressro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.21 |
wlsxTrapRogueIfoURLThis object is used to point to the WEBUI Rogue AP information URL.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.22 |
wlsxTrapVlanIdThis object is used in the traps to indicate the VLAN Id.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.23 |
wlsxTrapAdminStatusThis object is used in the traps to indicate the admin status of VLAN.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.24 |
wlsxTrapOperStatusThis object is used in the traps to indicate the admin status of VLAN.ro ArubaOperStateValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.25 |
wlsxTrapAuthServerNameThis object is used in the traps to indicate the Authentication Server used for Authentication.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.26 |
wlsxTrapAuthServerTimeoutThis object is used in the traps to indicate the Authentication Server Timeout.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.27 |
wlsxTrapCardSlotThis object is used in the traps to indicate the Slot in which this card is present.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.28 |
wlsxTrapTemperatureValueThis object is used in the traps to indicate the Temperature Value.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.29 |
wlsxTrapProcessNameThis object is used in the traps to indicate the Process name.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.30 |
wlsxTrapFanNumberThis object is used in the traps to indicate the Fan Number.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.31 |
wlsxTrapVoltageTypeThis object is used in the traps to indicate the type of Voltage.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.32 |
wlsxTrapVoltageValueThis object is used in the traps to indicate the voltage value in Float.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.33 |
wlsxTrapStationBlackListReasonThe Reason for which a station is black listed.ro ArubaBlackListReason (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.34 |
wlsxTrapSpoofedIpAddressThis object is used in a trap to identify a spoofed IP address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.35 |
wlsxTrapSpoofedOldPhyAddressThis object is used in a trap to identify an old MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.36 |
wlsxTrapSpoofedNewPhyAddressThis object is used in a trap to identify a New MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.37 |
wlsxTrapDBNameThis object is used in a trap to identify name of the database.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.38 |
wlsxTrapDBUserNameThis object is used in a trap to identify name of the database user.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.39 |
wlsxTrapDBIpAddressThis object is used in a trap to identify the IpAddress of the Database.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.40 |
wlsxTrapDBTypeThis object is used in a trap to identify the port of the user.ro ArubaDBType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.41 |
wlsxTrapVrrpIDThis object contains the Virtual Router Identifier.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.42 |
wlsxTrapVrrpMasterIpThis object contains the Master IP address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.43 |
wlsxTrapVrrpOperStateThis object represents the VRRP Operational state.ro ArubaVrrpState (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.44 |
wlsxTrapESIServerGrpNameThis object represents the External Services Interface (ESI) Server Group namero DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.45 |
wlsxTrapESIServerNameThis object represents the External Services Interface (ESI) Server Namero DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.46 |
wlsxTrapESIServerIpAddressThis object represents the External Services Interface (ESI) Server IP addressro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.47 |
wlsxTrapLicenseDaysRemainingThis object represents number of the days remaining prior to a license expiry.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.48 |
wlsxTrapSwitchIpThis object represents the controller IP address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.49 |
wlsxTrapSwitchRoleThis object represents the Role of the controller.ro ArubaSwitchRole (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.50 |
wlsxTrapUserIpAddressThis object represents IP address of the User.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.51 |
wlsxTrapUserPhyAddressThis object represents MAC address of the User.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.52 |
wlsxTrapUserNameThis object represents the user name.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.53 |
wlsxTrapUserRoleThis object represents the Authentication method of the user.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.54 |
wlsxTrapUserAuthenticationMethodThis object represents the Authentication method of the user.ro ArubaAuthenticationMethods (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.55 |
wlsxTrapAPRadioNumberThis object represents the radio number.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.56 |
wlsxTrapRogueInfoURLThis object is used to point to the WEBGUI Rogue AP information URL.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.57 |
wlsxTrapInterferingAPInfoURLThis object is used to point to the WEBGUI Rogue interfering AP information URL.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.58 |
wlsxTrapPortNumberThis object is used in the traps to indicate the port number.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.59 |
wlsxTrapTimeThis object is used in all the enterprise traps to indicate the the time when the trap is generated on the controller.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.60 |
wlsxTrapHostIpThis object represents the Trap host.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.61 |
wlsxTrapHostPortThis object represents the Trap host port.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.62 |
wlsxTrapConfigurationIdThis object represents the ID of the configuration, to be used in traps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.63 |
wlsxTrapCTSURLThis object represents the URL from which the transfer should happen.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.64 |
wlsxTrapCTSTransferTypeThis object represents the transfer type, upload or download.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.65 |
wlsxTrapConfigurationStateThis object represents state of the configuration transfer.ro ArubaConfigurationState (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.66 |
wlsxTrapUpdateFailureReasonThis object represents the reason for the update failure.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.67 |
wlsxTrapUpdateFailedObjThis variable represents the AMAPI object which is the reason for the the update failure.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.68 |
wlsxTrapTableEntryChangeTypeThis object represents type of the configuration change.ro ArubaConfigurationChangeType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.69 |
wlsxTrapGlobalConfigObjThis variable represents the AMAPI object corresponding to the global configuration change.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.70 |
wlsxTrapTableGenNumberThis object represents generation number of a table. Used in the MMS, to keep track of the table content changes.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.71 |
wlsxTrapLicenseIdThis object is used in the traps to indicate the license ID.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.72 |
wlsxTrapConfidenceLevelThis object is used in the traps to indicate the Confidence Level as a percentagero Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.73 |
wlsxTrapMissingLicensesThis variable indicates any licenses that are not present during a configuration updatero DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.74 |
wlsxVoiceCurrentNumCdrThis object represents the number of CDRs in buffer.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.75 |
wlsxTrapTunnelIdThis Object represents the tunnel ID.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.76 |
wlsxTrapTunnelStatusThis Object represents the tunnel Status.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.77 |
wlsxTrapTunnelUpReasonThis Object represents the tunnel up reason.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.78 |
wlsxTrapTunnelDownReasonThis Object represents the tunnel down reason.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.79 |
wlsxTrapApSerialNumberThis object represents the AP Serial Number.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.80 |
wlsxTrapTimeStrThis object represents the Time in String format.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.81 |
wlsxTrapMasterIpThis object represents the master IP address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.82 |
wlsxTrapLocalIpThis object represents the Local IP address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.83 |
wlsxTrapMasterNameThis object represents the master controller name.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.84 |
wlsxTrapLocalNameThis object represents the local controller name.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.85 |
wlsxTrapPrimaryControllerIpThis object represents the IP address of the AP's primary controller.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.86 |
wlsxTrapBackupControllerIpThis object represents the IP address of the AP's backup controller.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.87 |
wlsxTrapSpoofedFrameTypeThis object is used in the traps to indicate the Spoofed Frame Typero DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.88 |
wlsxTrapAssociationTypeThis object is used in the traps to indicate the type of associationro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.89 |
wlsxTrapDeviceIpAddressThis object represents the IP address of a device seen by an AP.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.90 |
wlsxTrapDeviceMacThis object represents the MAC address of a device seen by an AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.91 |
wlsxTrapVcIpAddressThis object represents the Ip Address of a Voice client.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.92 |
wlsxTrapVcMacAddressThis object represents the MAC address of a Voice client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.93 |
wlsxTrapAPNameThis object is used in the traps to indicate the Name of the AP.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.94 |
wlsxTrapApModeThis Object represents the AP Mode.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.95 |
wlsxTrapAPPrevChannelThis object is used in the traps to indicate the Previous Channel.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.96 |
wlsxTrapAPPrevChannelSecThis object is used in the traps to indicate the Previous Secondary Channel.ro ArubaHTExtChannel (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.97 |
wlsxTrapAPPrevTxPowerThis object is used in the traps to indicate previous AP Transmit Power.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.98 |
wlsxTrapAPCurModeThis Object represents the APs Current Mode.ro ArubaAccessPointMode (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.99 |
wlsxTrapAPPrevModeThis Object represents the APs Previous Mode.ro ArubaAccessPointMode (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.100 |
wlsxTrapAPARMChangeReasonThis Object represents the APs Previous Mode.ro ArubaARMChangeReason (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.101 |
wlsxTrapAPChannelSecThis object is used in the traps to indicate the Current Secondary Channel.ro ArubaHTExtChannel (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.102 |
wlsxTrapUserAttributeChangeTypeThis object represents type of the configuration change.ro ArubaConfigurationChangeType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.103 |
wlsxTrapApControllerIpIP address of the controller to which the AP is (or was most recently) registered.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.104 |
wlsxTrapApMasterStatusStatus of the AP as seen by the master when the status changes.ro ArubaAPMasterStatus (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.105 |
wlsxTrapCaNameThis object is used in the traps to indicate the name of the trustpoint.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.106 |
wlsxTrapCrlNameThis object is used in the traps to indicate the name of the crl.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.107 |
wlsxTrapCountThis object represents the number of occurrence of this trap.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.108 |
wlsxTrapPowerSupplyNumberThis object represents the power supply number.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.109 |
wlsxTrapFanTrayNumberThis object represents the Fan Tray number.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.110 |
wlsxTrapClientClassificationThis object is used in the traps to indicate the classification of the client.ro ArubaStationType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.111 |
wlsxThresholdResourceTypeThis object represents the Threshold alert's Resource Type .ro ArubaThresholdResourceType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.112 |
wlsxThresholdResourceNameThis object represents the Threshold alert's Resource Name .ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.113 |
wlsxThresholdValueThis object represents the Threshold alert's set threshold value.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.114 |
wlsxResourceValueThis object represents the Threshold alert's actual value.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.115 |
wlsxStackPrevSlotThis object specifies the slot number of this stack element prior to topology change in stack. A value of -1 indicates that this slot was not in Active state of stack prior to topology change.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.116 |
wlsxStackCurrentSlotThis object specifies the slot number of this stack element after the topology change in stack. A value of -1 indicates that this slot is not in Active state of stack after the topology change.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.117 |
wlsxStackPrevStateThis object specifies the state of this stack element prior to topology change in stack.ro ArubaStackState (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.118 |
wlsxStackCurrentStateThis object specifies the state of this stack element after topology change in stack.ro ArubaStackState (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.119 |
wlsxStackChangeEventThis object specifies the event which caused change in topology in stack.ro ArubaStackChangeEvent (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.120 |
wlsxStackProtoIfTopoJoinedThis object specifies whether an interface has joined the stacking topology or left the topology.ro ArubaStackIfTopoJoined (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.121 |
wlsxStackMemberMacAddressThis object specifies mac-address of this stack element.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.122 |
wlsxStackMemberSlotNumberThis object specifies the slot number of this element in stack.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.123 |
wlsxStackIfNameThis object specifies the interface name which is part of stacking link connected to other stacking element.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.124 |
wlsxTrapLicenseServerDaysRemainingThis object represents number of the days remaining prior to expiry of license limits sent by the server.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.125 |
wlsxTrapLicenseClientDaysRemainingThis object represents number of the days remaining prior to expiry of licenses contributed by a license client.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.126 |
wlsxIfIndexThis object specifies the ifIndex.ro InterfaceIndex (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.127 |
wlsxIfStateThis object specifies the state of an interface.ro ArubaIfState (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.128 |
wlsxIfStateChangeReasonThis object specifies the reason for interface state change.ro ArubaIfStateChangeReason (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.129 |
wlsxTrapAPPreviousUplinkTypeThis object specifies the up link type for an AP.ro ArubaAPUplinkType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.130 |
wlsxTrapAPPreviousUplinkActiveTimeThis object specifies the up link type for an AP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.3.1.11.1.1.131 |
wlsxTrapAPActiveUplinkTypeThis object specifies the up link type for an AP.ro ArubaAPUplinkType (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.132 |
wlsxTrapAPUplinkChangeReasonThis object specifies the up link change reason.ro ArubaAPUplinkChangeReason (ARUBA-TC) .1.3.6.1.4.1.14823.2.3.1.11.1.1.133 |
wlsxTrapExpiringCertNameThis object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.134 |
wlsxTrapExpiredCertNameThis object is used in the traps to indicate the name of the certificate that has expired.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.135 |
wlsxTrapHTModeThis object represents HT Mode.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.136 |
wlsxTrapPhyTypeThis object represents Physical Type.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.11.1.1.137 |
wlsxTrapAPManagedModeConfigFailureThis object indicates the error for the failure of config apply on IAP.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.11.1.1.138 |
wlsxTrapAuthServerAddressThis object is used in the traps to indicate the Authentication Server IP used for Authentication.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.139 |
wlsxTrapDefinitionsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.11.1.2 |
wlsxVlanLinkUpThis trap indicates that a VLAN interface is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1000 |
wlsxVlanLinkDownThis trap indicates that a VLAN interface is down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1001 |
wlsxSignatureMatchThis trap indicates that a signature match was detected. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1002 |
wlsxNodeRateAnomalyThis trap indicates that a node is exceeding the threshold set for the frame type. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1003 |
wlsxNormalTemperatureThis trap indicates that the Temperature has returned to an acceptable range. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1004 |
wlsxProcessRestartThis trap indicates that the named process has been restarted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1005 |
wlsxFlashSpaceOKThis trap which indicates that the system flash space is back to a sufficient level. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1006 |
wlsxMemoryUsageOKThis trap which indicates that the free memory usage is back to a sufficient level. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1007 |
wlsxPowerSupplyOKThis trap indicates that the system power supply condition have returned to normal operation status. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1008 |
wlsxFanOKThis trap indicates that the fan has returned to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1009 |
wlsxInRangeVoltageThis trap indicates that the controller Voltage is back within range. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1010 |
wlsxCoverageHoleResolvedThis trap indicates that a coverage hole at location wlsxTrapAPLocation has been resolved. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1011 |
wlsxNSwitchIPChangedThis trap indicates that the controller IP address has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1012 |
wlsxNSwitchRoleChangeThis trap indicates that the role of the controller IP address has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1013 |
wlsxNUserEntryCreatedThis trap indicates that a new user was created. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1014 |
wlsxNUserEntryDeletedThis trap indicates that a user was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1015 |
wlsxNUserEntryAuthenticatedThis trap indicates that a user is Authenticated. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1016 |
wlsxNUserEntryDeAuthenticatedThis trap indicates that a user is Deauthenticated. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1017 |
wlsxNUserAuthenticationFailedThis trap indicates that a user authentication has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1018 |
wlsxNAuthServerReqTimedOutThis trap indicates that the authentication server request timed out. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1019 |
wlsxNAuthServerTimedOutThis trap indicates that the authentication server timed out. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1020 |
wlsxNAuthServerIsUpThis trap indicates that an authentication server is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1021 |
wlsxNAuthMaxUserEntriesA trap which indicates that the user entries table is full and cannot add any more entries. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1022 |
wlsxNAuthMaxAclEntriesA trap which indicates that the ACL Entries table is full and cannot add any more entries. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1023 |
wlsxNAuthMaxBWContractsA trap which indicates that the controller reached the maximum number of configurable Bandwidth contracts. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1024 |
wlsxNPowerSupplyFailureA trap which indicates that the power supply has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1025 |
wlsxNFanFailureA trap which indicates that the fan has failed or is missing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1026 |
wlsxNOutOfRangeVoltageA trap which indicates that the controller voltage is out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1027 |
wlsxNOutOfRangeTemperatureA trap which indicates that the controller internal temperature is out of range. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1028 |
wlsxNLCInsertedA Trap which indicates that a line card is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1029 |
wlsxNSCInserteda Trap which indicates that a supervisor card is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1030 |
wlsxNGBICInsertedA Trap which indicates that a GBIC is inserted in a Line Card. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1031 |
wlsxNProcessDiedA Trap which indicates that a process has died. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1032 |
wlsxNProcessExceedsMemoryLimitsA Trap which indicates that a process is consuming Large amounts of memory. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1033 |
wlsxNLowOnFlashSpaceA Trap which indicates that the controller is running low on flash space. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1034 |
wlsxNLowMemoryA Trap which indicates that the system free memory is low. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1035 |
wlsxNFanTrayRemovedA Trap which indicates that a fan tray is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1036 |
wlsxNFanTrayInsertedA Trap which indicates that a fan tray is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1037 |
wlsxNLCRemovedA Trap which indicates that a Line card is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1038 |
wlsxNPowerSupplyMissingA Trap which indicates that the power supply is missing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1039 |
wlsxNAccessPointIsUpA Trap which indicates that an access point up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1040 |
wlsxNAccessPointIsDownA Trap which indicates that an access point down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1041 |
wlsxNCoverageHoleDetectedThis trap indicates that an access point at Location wlsxTrapAPLocation has detected a Coverage Hole. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1042 |
wlsxNChannelChangedThis trap indicates that an access point at Location wlsxTrapAPLocation has changed the channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1043 |
wlsxNStationAddedToBlackListThis trap indicates that the station is black listed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1044 |
wlsxNStationRemovedFromBlackListThis trap indicates that the station is removed from the black list. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1045 |
wlsxNIpSpoofingDetectedA trap indicating that the controller detected IP Spoofing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1046 |
wlsxNDBCommunicationFailureThis trap indicates that communication with Database failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1047 |
wlsxNVrrpStateChangeThis trap indicates that VRRP state has changed on the controller. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1048 |
wlsxNRadioAttributesChangedA Trap which indicates changes in the Radio attributes of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1049 |
wlsxNESIServerUpA Trap which indicates that a ESI server is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1050 |
wlsxNESIServerDownA Trap which indicates that a ESI server is down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1051 |
wlsxNLicenseExpiryA Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1052 |
wlsxUnsecureAPDetectedThis trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1053 |
wlsxUnsecureAPResolvedThis trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1054 |
wlsxStaImpersonationThis trap indicates that an AM detected Station Impersonation. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1055 |
wlsxReservedChannelViolationThis trap indicates that an AM detected an access point which is violating the Reserved Channel configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1056 |
wlsxValidSSIDViolationThis trap indicates that an AP has detected an access point is violating Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1057 |
wlsxChannelMisconfigurationThis trap indicates that an AP detected an access point that has a channel misconfiguration because it is using a channel that is not valid. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1058 |
wlsxOUIMisconfigurationThis trap indicates that an AP detected an access point that has an OUI misconfiguration because it is using an OUI that is not valid. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1059 |
wlsxSSIDMisconfigurationThis trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using an SSID that is not valid. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1060 |
wlsxShortPreableMisconfigurationThis trap indicates that an access point has bad Short preamble configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1061 |
wlsxWPAMisconfigurationThis trap indicates that an AP detected an access point that is misconfigured because it is not using WPA. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1062 |
wlsxAdhocNetworkDetectedThis trap indicates that an AM has detected an Ad hoc network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1063 |
wlsxAdhocNetworkRemovedThis trap indicates that a previously detected Ad hoc Network is no longer present in the network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1064 |
wlsxStaPolicyViolationThis trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy. For more info check: http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0019 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1065 |
wlsxRepeatWEPIVViolationThis trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1066 |
wlsxWeakWEPIVViolationThis trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector. For more info check: http://www.wve.org/entries/show/WVE-2005-0021 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1067 |
wlsxChannelInterferenceDetectedThis trap indicates that an AP has detected channel interference. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1068 |
wlsxChannelInterferenceClearedThis trap indicates that a previously detected channel interference is no longer present. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1069 |
wlsxAPInterferenceDetectedThis trap indicates that an AP has detected interference for an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1070 |
wlsxAPInterferenceClearedThis trap indicates that the previously detected interference for an access point is no longer present. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1071 |
wlsxStaInterferenceDetectedThis trap indicates that an AP has detected interference for a station. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1072 |
wlsxStaInterferenceClearedThis trap indicates that the previously detected interference for a station is no longer present. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1073 |
wlsxFrameRetryRateExceededThis trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1074 |
wlsxFrameReceiveErrorRateExceededThis trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1075 |
wlsxFrameFragmentationRateExceededThis trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1076 |
wlsxFrameBandWidthRateExceededThis trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1077 |
wlsxFrameLowSpeedRateExceededThis trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1078 |
wlsxFrameNonUnicastRateExceededThis trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1079 |
wlsxLoadbalancingEnabledThis trap indicates that an AM is reporting that an AP has enabled Load balancing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1080 |
wlsxLoadbalancingDisabledThis trap indicates that an AM is reporting that an AP has enabled Load balancing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1081 |
wlsxChannelFrameRetryRateExceededThis trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1082 |
wlsxChannelFrameFragmentationRateExceededThis trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1083 |
wlsxChannelFrameErrorRateExceededThis trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1084 |
wlsxSignatureMatchAPThis trap indicates that an AP detected a signature match in a frame from an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1085 |
wlsxSignatureMatchStaThis trap indicates that an AP detected a signature match in a frame from a Station. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1086 |
wlsxChannelRateAnomalyThis trap indicates that an AP detected frames on a channel which exceed the configured IDS rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1087 |
wlsxNodeRateAnomalyAPThis trap indicates that an AP detected frames transmitted or received by an access point, which exceed the configured IDS rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1088 |
wlsxNodeRateAnomalyStaThis trap indicates that an AP detected frames transmitted or received by a node, which exceed the configured IDS rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1089 |
wlsxEAPRateAnomalyThis trap indicates that the rate of EAP Handshake packets received by an AP has exceeded the configured IDS EAP Handshake rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0049 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1090 |
wlsxSignalAnomalyThis trap indicates that an AM detected a Signal Anomaly. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1091 |
wlsxSequenceNumberAnomalyAPThis trap indicates that an AM received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more info check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1092 |
wlsxSequenceNumberAnomalyStaThis trap indicates that an AM received packets from a Node which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more info check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1093 |
wlsxDisconnectStationAttackThis trap indicates that an AM detected a station Disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1094 |
wlsxApFloodAttackThis trap indicates that the number of potential fake APs detected by an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands. For more info check: http://www.wve.org/entries/show/WVE-2005-0056 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1095 |
wlsxAdhocNetworkThis trap indicates that an AM detected an Ad hoc Network. An Station is connected to an ad hoc AP. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1096 |
wlsxWirelessBridgeThis trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1097 |
wlsxInvalidMacOUIAPThis trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1098 |
wlsxInvalidMacOUIStaThis trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1099 |
wlsxWEPMisconfigurationThis trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1100 |
wlsxStaRepeatWEPIVViolationThis trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1101 |
wlsxStaWeakWEPIVViolationThis trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1102 |
wlsxStaAssociatedToUnsecureAPThis trap indicates that an AM detected a client associated with a Rogue access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1103 |
wlsxStaUnAssociatedFromUnsecureAPThis trap indicates that a previously detected rogue access point association is no longer present. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1104 |
wlsxAdhocNetworkBridgeDetectedThis trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1105 |
wlsxInterferingApDetectedThis trap indicates that an AP detected an access point classified as Interfering. The access point is declared Interfering because it is neither authorized or classified as Rogue. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1106 |
wlsxPortUpThis trap indicates that a Physical port is up.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1107 |
wlsxPortDownThis trap indicates that a Physical port is Down.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1108 |
wlsxBSSIDIsUpA Trap which indicates that an access point BSSID is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1109 |
wlsxBSSIDIsDownA Trap which indicates that an access point BSSID is down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1110 |
wlsxColdStartAn enterprise version of cold start trap, which contains the controller time stamp. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1111 |
wlsxWarmStartAn enterprise version of warm start trap, which contains the controller time stamp. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1112 |
wlsxAPImpersonationThis trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold. The expected number is calculated based on the Beacon Interval Field in the Beacon frame. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1113 |
wlsxInformQueueOverFlowThis trap indicates that an Inform queue overflow condition occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1114 |
wlsxNAuthServerIsDownThis trap indicates that an authentication server is down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1115 |
wlsxCTSTransferErrorThis trap indicates the status of the configuration transfer from the management station. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1116 |
wlsxCTSTransferSucceededThis trap indicates the status of the configuration transfer from the management station. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1117 |
wlsxConfigurationUpdateErrorThis trap indicates the configuration update status. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1118 |
wlsxConfigurationUpdateSucceededThis trap indicates the configuration update status. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1119 |
wlsxGlobalConfigurationChangeNotificationThis trap indicates that global configuration was modified on the controller. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1120 |
wlsxUserEntryChangedThis trap indicates that the user configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1121 |
wlsxAPBssidEntryChangedThis trap indicates that the BSSID configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1122 |
wlsxAPRadioEntryChangedThis trap indicates that the Radio configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1123 |
wlsxAPEntryChangedThis trap indicates that the AP configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1124 |
wlsxSwitchListEntryChangedThis trap indicates that the controller list has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1125 |
wlsxPortEntryChangedThis trap indicates that the port configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1126 |
wlsxVlanEntryChangedThis trap indicates that the VLAN configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1127 |
wlsxVlanInterfaceEntryChangedThis trap indicates that the VLAN Interface configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1128 |
wlsxWindowsBridgeDetectedThis trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1129 |
wlsxLicenseEntryChangedThis trap indicates that the license table has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1130 |
wlsxEsiServerChangedThis trap indicates that the ESI server table has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1131 |
wlsxMonAPEntryChangedThis trap indicates that a monitored AP entry changed NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1132 |
wlsxMonStationEntryChangedThis trap indicates that a monitored station entry changed NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1133 |
wlsxSignAPNetstumblerThis trap indicates that an AP detected a signature match for Netstumbler from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0025 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1134 |
wlsxSignStaNetstumblerThis trap indicates that an AP detected a signature match for Netstumbler from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0025 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1135 |
wlsxSignAPAsleapThis trap indicates that an AP detected a signature match for ASLEAP from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0027 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1136 |
wlsxSignStaAsleapThis trap indicates that an AP detected a signature match for ASLEAP from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0027 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1137 |
wlsxSignAPAirjackThis trap indicates that an AP detected a signature match for AirJack from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0018 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1138 |
wlsxSignStaAirjackThis trap indicates that an AP detected a signature match for AirJack from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0018 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1139 |
wlsxSignAPNullProbeRespThis trap indicates that an AP detected a signature match for Null-Probe-Response from an access point. For more info check: http://www.wve.org/entries/show/WVE-2006-0064 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1140 |
wlsxSignStaNullProbeRespThis trap indicates that an AP detected a signature match for Null-Probe-Response from a Station. For more info check: http://www.wve.org/entries/show/WVE-2006-0064 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1141 |
wlsxSignAPDeauthBcastThis trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1142 |
wlsxSignStaDeauthBcastThis trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1143 |
wlsxWindowsBridgeDetectedAPThis trap indicates that an AP is detecting an access point that is bridging from a wireless network to a wired network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1144 |
wlsxWindowsBridgeDetectedStaThis trap indicates that an AP is detecting a station that is bridging from a wireless network to a wired network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1145 |
wlsxAdhocNetworkBridgeDetectedAPThis trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1146 |
wlsxAdhocNetworkBridgeDetectedStaThis trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1147 |
wlsxDisconnectStationAttackAPThis trap indicates that an AM detected a station disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1148 |
wlsxDisconnectStationAttackStaThis trap indicates that an AM detected a station Disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1149 |
wlsxSuspectUnsecureAPDetectedThis trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue, with the supplied confidence level, because it was matched to the wired MAC address. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1150 |
wlsxSuspectUnsecureAPResolvedThis trap indicates that a previously detected access point, classified Suspected Rogue, is either no longer present in the network or has changed its state. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1151 |
wlsxConfigurationLicenseMismatchThis trap indicates the configuration update status in the case where some configuration could not be applied due to missing licenses. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1152 |
wlsxVoiceCdrBufferThresholdReachedThis trap indicates that the CDR buffer threshold has been reached NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1153 |
wlsxTunnelUpThis trap indicates that a tunnel interface is up. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1154 |
wlsxTunnelDownThis trap indicates that a tunnel interface is down. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1155 |
wlsxMeshNodeEntryChangedThis trap indicates that the mesh node configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1156 |
wlsxHtGreenfieldSupportedThis trap indicates that an AP detected an access point that supports HT Greenfield mode. For more info check: http://www.wve.org/entries/show/WVE-2008-0005 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1157 |
wlsxHT40MHzIntoleranceAPThis trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. For more info check: http://www.wve.org/entries/show/WVE-2008-0004 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1158 |
wlsxHT40MHzIntoleranceStaThis trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. For more info check: http://www.wve.org/entries/show/WVE-2008-0004 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1159 |
wlsxNAuthServerAllInServiceThis trap indicates that all authentication servers is a server group are brought back in service. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1160 |
wlsxNAdhocNetworkThis trap indicates that an AP detected an ad hoc network where a station is connected to an ad hoc access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1161 |
wlsxNAdhocNetworkBridgeDetectedAPThis trap indicates that an AP detected an ad hoc network that is bridging to a wired network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1162 |
wlsxNAdhocNetworkBridgeDetectedStaThis trap indicates that an AP detected an ad hoc network that is bridging to a wired network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1163 |
wlsxNAuthMaxXsecUserEntriesA trap which indicates that the xSec user limit is reached. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1164 |
wlsxNVpnMaxSessionsA trap which indicates that the VPN session limit is reached. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1165 |
wlsxNRapExpiredPSKA trap which indicates that the RAP is using the Expired PSK. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1166 |
wlsxNRapWarnExpiredPSKA trap which indicates that the Cached IKE PSK for RAPs will expire soon. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1167 |
wlsxNConnectionResetWithLocalA trap which indicates that tcp connection between master controller and local controller has been lost. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1168 |
wlsxNApOnBackupControllerA trap which indicates that the AP has registered with the backup controller. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1169 |
wlsxClientFloodAttackThis trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more info check: http://www.wve.org/entries/show/WVE-2005-0056 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1170 |
wlsxValidClientNotUsingEncryptionThis trap indicates that an AP detected an unencrypted data frame between a valid client and an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1171 |
wlsxAdhocUsingValidSSIDThis trap indicates that an AP detected an ad hoc network using a valid/protected SSID. For more info check: http://www.wve.org/entries/show/WVE-2005-0008 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1172 |
wlsxAPSpoofingDetectedThis trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1173 |
wlsxClientAssociatingOnWrongChannelThis trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel. This can be a sign that the BSSID is being spoofed in order to fool the client into thinking the AP is operating on another channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1174 |
wlsxNDisconnectStationAttackThis trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1175 |
wlsxNStaUnAssociatedFromUnsecureAPThis trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1176 |
wlsxOmertaAttackThis trap indicates that an AP detected an Omerta attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0053 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1177 |
wlsxTKIPReplayAttackThis trap indicates that an AP detected a possible TKIP replay attack. If successful this could be the precursor to more advanced attacks. For more info check: http://www.wve.org/entries/show/WVE-2008-0013 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1178 |
wlsxChopChopAttackThis trap indicates that an AP detected a ChopChop attack. For more info check: http://www.wve.org/entries/show/WVE-2006-0038 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1179 |
wlsxFataJackAttackThis trap indicates that an AP detected a FATA-Jack attack. For more info check: http://www.wve.org/entries/show/WVE-2006-0057 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1180 |
wlsxInvalidAddressCombinationThis trap indicates that an AP detected an invalid source and destination combination. For more info check: http://www.wve.org/entries/show/WVE-2008-0011 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1181 |
wlsxValidClientMisassociationThis trap indicates that an AP detected a misassociation between a valid client and an unsafe AP. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1182 |
wlsxMalformedHTIEDetectedThis trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1183 |
wlsxMalformedAssocReqDetectedThis trap indicates that an AP detected a malformed association request with a NULL SSID. For more info check: http://www.wve.org/entries/show/WVE-2008-0010 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1184 |
wlsxOverflowIEDetectedThis trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. For more info check: http://www.wve.org/entries/show/WVE-2008-0008 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1185 |
wlsxOverflowEAPOLKeyDetectedThis trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. For more info check: http://www.wve.org/entries/show/WVE-2008-0009 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1186 |
wlsxMalformedFrameLargeDurationDetectedThis trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting. For more info check: http://www.wve.org/entries/show/WVE-2005-0051 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1187 |
wlsxMalformedFrameWrongChannelDetectedThis trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP. For more info check: http://www.wve.org/entries/show/WVE-2006-0050 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1188 |
wlsxMalformedAuthFrameThis trap indicates that an AP detected an authentication frame with either a bad algorithm (similar to Fata-Jack) or a bad transaction. For more info check: http://www.wve.org/entries/show/WVE-2006-0057 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1189 |
wlsxCTSRateAnomalyThis trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1190 |
wlsxRTSRateAnomalyThis trap indicates that the rate of RTS packets received by an AP exceeds the configured IDS threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1191 |
wlsxNRogueAPDetectedThis trap indicates that an unauthorized access point is connected to the wired network. The access point is classified as Rogue by the system. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1192 |
wlsxNRogueAPResolvedThis trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1193 |
wlsxNeighborAPDetectedThis trap indicates that an access point has been classified as a Neighbor by the system. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1194 |
wlsxNInterferingAPDetectedThis trap indicates that an access point has been classified as Interfering by the system. The access point is declared Interfering because it is not authorized, nor has it been classified as a Rogue. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1195 |
wlsxNSuspectRogueAPDetectedThis trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1196 |
wlsxNSuspectRogueAPResolvedThis trap indicates that a previously detected access point, classified as Suspected Rogue, is either no longer present in the network or has changed its state. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1197 |
wlsxBlockAckAttackDetectedThis trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window. For more info check: http://www.wve.org/entries/show/WVE-2008-0006 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1198 |
wlsxHotspotterAttackDetectedThis trap indicates that a new AP has appeared immediately following a client probe request. This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network. For more info check: http://www.wve.org/entries/show/WVE-2005-0054 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1199 |
wlsxNSignatureMatchThis trap indicates that an AP detected a signature match in a frame. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1200 |
wlsxNSignatureMatchNetstumblerThis trap indicates that an AP detected a signature match for Netstumbler in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0025 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1201 |
wlsxNSignatureMatchAsleapThis trap indicates that an AP detected a signature match for ASLEAP in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0027 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1202 |
wlsxNSignatureMatchAirjackThis trap indicates that an AP detected a signature match for Airjack in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0018 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1203 |
wlsxNSignatureMatchNullProbeRespThis trap indicates that an AP detected a signature match for Null-Probe-Response in a frame. For more info check: http://www.wve.org/entries/show/WVE-2006-0064 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1204 |
wlsxNSignatureMatchDeauthBcastThis trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1205 |
wlsxNSignatureMatchDisassocBcastThis trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0046 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1206 |
wlsxNSignatureMatchWellenreiterThis trap indicates that an AP detected a signature match for Wellenreiter in a frame. For more info check: http://www.wve.org/entries/show/WVE-2006-0058 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1207 |
wlsxAPDeauthContainmentThis trap indicates that an AP has attempted to contain an access point by disconnecting its client. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1208 |
wlsxClientDeauthContainmentThis trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1209 |
wlsxAPWiredContainmentThis trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1210 |
wlsxClientWiredContainmentThis trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1211 |
wlsxAPTaggedWiredContainmentThis trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1212 |
wlsxClientTaggedWiredContainmentThis trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1213 |
wlsxTarpitContainmentThis trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1214 |
wlsxVoiceClientLocationUpdateThis trap indicates that the location of voice client has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1215 |
wlsxAPChannelChangeThis trap indicates that an AP changed its channel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1216 |
wlsxAPPowerChangeThis trap indicates that an AP changed its transmit power level. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1217 |
wlsxAPModeChangeThis trap indicates that an AP changed its mode from AP to APMonitor or vice versa. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1218 |
wlsxUserEntryAttributesChangedThis trap indicates that the user entry attributes have changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1219 |
wlsxPowerSaveDosAttackThis trap indicates that an AP detected a Power Save DoS attack. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1220 |
wlsxNAPMasterStatusChangeThis trap indicates that the status of the AP as seen by the master controller has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1221 |
wlsxNAdhocUsingValidSSIDThis trap indicates that an AP detected an ad hoc network node using a valid/protected SSID. For more info check: http://www.wve.org/entries/show/WVE-2005-0008 NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1222 |
wlsxCRLExpiredThis trap indicates that the CRL associated with the particular Trustpoint is expired. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1223 |
wlsxMgmtUserAuthenticationFailedThis trap indicates that a management user authentication has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1224 |
wlsxNConnectionBackfromLocalA trap which indicates that tcp connection between master controller and local controller is back. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1225 |
wlsxAPNumUpgradeFailureA trap which indicates the number of upgrade failure of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1226 |
wlsxAPNumWarmStartsA trap which indicates the number of warm starts of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1227 |
wlsxAPNumColdStartsA trap which indicates the number of cold starts of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1228 |
wlsxAPNumDownA trap which indicates the number of down alarms of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1229 |
wlsxAPNumRadioDownA trap which indicates the number of radio down alarms of an access point. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1230 |
wlsxNumClockSyncErrorsA trap which indicates the total number of clock sync errors between the switch and access points. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1231 |
wlsxNumColdStartA trap which indicates the number of cold-starts of the switch. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1232 |
wlsxNumWarmStartA trap which indicates the number of warm-starts of the switch. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1233 |
wlsxWirelessHostedNetworkDetectedThis trap indicates that an AP detected a wireless client that is hosting a softAP. The softAP could be used to share the hosting client's wired or wireless network connection with other wireless users. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1234 |
wlsxClientAssociatedToHostedNetworkThis trap indicates that an AP detected that a wireless client associated to an access point that is hosted by another wireless client. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1235 |
wlsxThresholdExceededA trap indicates a particular resource under monitoring has gone above the threshold specified. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1236 |
wlsxThresholdClearedA trap indicates a particular resource under monitoring has come below the threshold specified. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1237 |
wlsxWirelessHostedNetworkContainmentThis trap indicates that containment is being enforced on a client associated to a hosted network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1238 |
wlsxHostOfWirelessNetworkContainmentThis trap indicates that containment is being enforced on a client that is hosting a wireless hosted network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1239 |
wlsxEnhancedAdhocContainmentThis trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1240 |
wlsxPowerSupplyOKTrapThis trap indicates that the system power supply condition have returned to normal operation status. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1241 |
wlsxPowerSupplyFailureTrapA trap which indicates that the power supply has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1242 |
wlsxFanTrayRemovedTrapA Trap which indicates that a fan tray is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1243 |
wlsxFanTrayInsertedTrapA Trap which indicates that a fan tray is inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1244 |
wlsxPowerSupplyMissingTrapA Trap which indicates that the power supply is missing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1245 |
wlsxStackTopologyChangeTrapWhen change happens in any topology of the stack element in the stack, then a notification is sent to the Management Entity. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1246 |
wlsxStackIfStateChangeTrapWhen any stacking interface in any stack element joins or leaves stacking topology, then a notification is sent to the Management Entity with slot and interface information. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1247 |
wlsxLicenseServerExpiryA Trap which indicates that licenses sent from the license server will expire in wlsxTrapLicenseServerDaysRemaining days. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1248 |
wlsxLicenseClientExpiryA Trap which indicates that licenses contributed by a license client will expire in wlsxTrapLicenseClientDaysRemaining days. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1249 |
wlsxIfStateChangeTrapWhen the link state of an interface changes due to reason specified by wlsxIfStateChangeReason object, a notification is sent to the Management Entity with reason for this state change and interface information. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1250 |
wlsxWMSOffloadRecommendedThis trap indicates that current state in the WMS module shows that WMS is reaching capacity, and so it is recommended to enable WMS-Offload. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1251 |
wlsxAPActiveUplinkChangedWhen the active uplink of an AP changes, a notification is sent to the Management Entity with the new uplink type NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1252 |
wlsxCertExpiringSoonThis trap indicates that a particular Certificate is going to expire in less than 60 days. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1253 |
wlsxCertExpiredThis trap indicates that a particular Certificate has expired and is no longer valid. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1254 |
wlsxAPManagedModeConfigFailureTrapThis trap indicates that config apply has failed on the IAP. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.11.1.2.1255 |