WLSR-AP-MIB
AI MIB Summary
The WLSR-AP-MIB module facilitates SNMP-based monitoring and management of Wireless LAN Switch Router (WLSR) Access Points and Air Monitors, providing visibility into interface status, radio statistics, client association counts, and RF interference metrics.
This MIB is for managing the Access Points and Air Monitors.
Main OID:
wlsrMIB.1.3.6.1.4.1.14823.2.3.1.1
283
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
283 total| Object Name |
|---|
wlsrMIBThis MIB is for managing the Access Points and Air Monitors. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.3.1.1 |
wlsrConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.1 |
wlsrConfigTableTable will list the configuration data of a wifi interface. SEQUENCE OF WlsrConfigEntry .1.3.6.1.4.1.14823.2.3.1.1.1.1 |
wlsrConfigEntryA Wifi configuration entry WlsrConfigEntry .1.3.6.1.4.1.14823.2.3.1.1.1.1.1 |
wlsrBSSIDBSSID of the WIFI Interface MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1 |
wlsrESSIDESSID of the WIFI Interfacero DisplayString .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2 |
wlsrModeMode of the Access Point. Master indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3 |
wlsrCurrentChannelThe current operating frequency channel of the DSSS PHY.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4 |
wlsrTxPowerTransmit power of the Access point. The value is between 0 ... 4ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5 |
wlsrRTSThresholdThis attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6 |
wlsrRetryLimitThis attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7 |
wlsrPreambleThe current radio preamble type in use by the wifi interface.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8 |
wlsrBeaconIntervalThis object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9 |
wlsrPowerMgmtThis attribute indicates whether Power Management is enabled or not.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10 |
wlsrLoadBalanceThis attribute indicates if load balancing is enabled or disabled.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11 |
wlsrSupportedRatesBasic Bit rates supported by this WIFI interface.ro Bits .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 |
wlsrDTIMPeriodThis attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 |
wlsrLMSAddressThis attribute indicates the IP Address of the Local switch that the AP is connected to.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 |
wlsrEncryptionThis attribute indicates the Encryption type of the WIFI interface.ro Bits .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 |
wlsrStatusThis attribute indicates the status of the WIFI Interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 |
wlsrAgeoutThis attribute indicates the ageout value in seconds.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 |
wlsrMTUThis attribute indicates the MTU of the WIFI Interface.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19 |
wlsrLocationThis attribute indicates the Location of the Access Point in Building.Floor.location format.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20 |
wlsrHideSSIDThis attribute indicates if SSID is hidden or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21 |
wlsrDenyBroadcastA True value indicates that Broadcast is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22 |
wlsrBGmodeThis attributes indicates the mode of the WIFI Interfacero Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23 |
wlsrCardTypeIndicates the type of the radio card.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24 |
wlsrRegDomainThis Object represents the configured Regulatory Domain this AP will adhere to. 1 -- US 2 -- JAPAN 3 -- EU 4 -- EU2 5 -- EU3 6 -- KOREA 7 -- CHINA 8 -- France 9 -- Singapore 10 -- MALAY 11 -- BRAZIL 12 -- Taiwan 13 -- Czech Republic 14 -- GR 15 -- South Africa 16 -- Argentina 17 -- Australia 18 -- Chilerodeprecated Integer32 .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25 |
wlsrCountryCodeThis Object represents the configured Country code .ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26 |
wlsrTxRatesTransmit Bit rates supported by this WIFI interface.ro Bits .1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27 |
wlsrStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.3 |
wlsrStatsChannelGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.3.3 |
wlsrChannelStatsTableTable contains the Channel Statistics. SEQUENCE OF WlsrChannelStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.1 |
wlsrChannelStatsEntryChannel Statistics Table WlsrChannelStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1 |
wlsrChStatsChannelThe frequency Channel on which these statistics are collected. INTEGER .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.1 |
wlsrChStatsNumAPsThis attribute indicates the number of APs using this channel.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.2 |
wlsrChStatsNumStationsThis attribute indicates the number of stations using this channel.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.3 |
wlsrChStatsTotPktsThis attribute indicates the total packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.4 |
wlsrChStatsTotBytesThis attribute indicates the total Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.5 |
wlsrChStatsTotRetryPktsThis attribute indicates the total Retry Packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.6 |
wlsrChStatsTotFragmentedPktsThis attribute indicates the total Fragmented Packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7 |
wlsrChStatsTotPhyErrPktsThis attribute indicates the total Physical Error Packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8 |
wlsrChStatsTotMacErrPktsThis attribute indicates the total Mac errors packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9 |
wlsrChStatsFrameErrorRateFrame errors as a percentage of total frames on this channel.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10 |
wlsrChStatsFrameRetryRateThe Frame Retry Ratero Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11 |
wlsrChStatsFrameLowSpeedRateFrame Low speed error rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.12 |
wlsrChStatsFrameNonUnicastRateFrame non Unicast rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.13 |
wlsrChStatsFrameBandwidthRateFrame Bandwidth rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.14 |
wlsrChStatsFrameFragmentationRateFrame Fragmentation Rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.15 |
wlsrChStatsMonitoredTimeTime in ticks, since we were observing this channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.16 |
wlsrChannelRateStatsTableThis table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. SEQUENCE OF WlsrChannelRateStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.2 |
wlsrChannelRateStatsEntryChannel Rate Statistics. WlsrChannelRateStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1 |
wlsrChStatsTotPktsAt1MbpsThis attribute indicates the total number of packets observed on this channel at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.1 |
wlsrChStatsTotBytesAt1MbpsThis attribute indicates the total number of Bytes observed on this channel at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.2 |
wlsrChStatsTotPktsAt2MbpsThis attribute indicates the total number of packets observed on this channel at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3 |
wlsrChStatsTotBytesAt2MbpsThis attribute indicates the total number of Bytes observed on this channel at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4 |
wlsrChStatsTotPktsAt5MbpsThis attribute indicates the total number of packets observed on this channel at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5 |
wlsrChStatsTotBytesAt5MbpsThis attribute indicates the total number of Bytes observed on this channel at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6 |
wlsrChStatsTotPktsAt11MbpsThis attribute indicates the total number of packets observed on this channel at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.7 |
wlsrChStatsTotBytesAt11MbpsThis attribute indicates the total number of Bytes observed on this channel at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.8 |
wlsrChStatsTotPktsAt6MbpsThis attribute indicates the total number of packets observed on this channel at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.9 |
wlsrChStatsTotBytesAt6MbpsThis attribute indicates the total number of Bytes observed on this channel at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.10 |
wlsrChStatsTotPktsAt12MbpsThis attribute indicates the total number of packets observed on this channel at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.11 |
wlsrChStatsTotBytesAt12MbpsThis attribute indicates the total number of Bytes observed on this channel at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.12 |
wlsrChStatsTotPktsAt18MbpsThis attribute indicates the total number of packets observed on this channel at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.13 |
wlsrChStatsTotBytesAt18MbpsThis attribute indicates the total number of Bytes observed on this channel at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.14 |
wlsrChStatsTotPktsAt24MbpsThis attribute indicates the total number of packets observed on this channel at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.15 |
wlsrChStatsTotBytesAt24MbpsThis attribute indicates the total number of Bytes observed on this channel at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.16 |
wlsrChStatsTotPktsAt36MbpsThis attribute indicates the total number of packets observed on this channel at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.17 |
wlsrChStatsTotBytesAt36MbpsThis attribute indicates the total number of Bytes observed on this channel at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.18 |
wlsrChStatsTotPktsAt48MbpsThis attribute indicates the total number of packets observed on this channel at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19 |
wlsrChStatsTotBytesAt48MbpsThis attribute indicates the total number of Bytes observed on this channel at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20 |
wlsrChStatsTotPktsAt54MbpsThis attribute indicates the total number of packets observed on this channel at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21 |
wlsrChStatsTotBytesAt54MbpsThis attribute indicates the total number of Bytes observed on this channel at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22 |
wlsrChannelDATypeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. SEQUENCE OF WlsrChannelDATypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.3 |
wlsrChannelDATypeStatsEntryChannel Statistics based on the Address Type. WlsrChannelDATypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1 |
wlsrChStatsTotDABroadcastPktsThis attribute indicates the total number of Broadcast packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1 |
wlsrChStatsTotDABroadcastBytesThis attribute indicates the total number of Broadcast Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2 |
wlsrChStatsTotDAMulticastPktsThis attribute indicates the total number of Multicast packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3 |
wlsrChStatsTotDAMulticastBytesThis attribute indicates the total number of Multicast Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4 |
wlsrChStatsTotDAUnicastPktsThis attribute indicates the total number of Unicast packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5 |
wlsrChStatsTotDAUnicastBytesThis attribute indicates the total number of Unicast Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6 |
wlsrChannelFrameTypeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. SEQUENCE OF WlsrChannelFrameTypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.4 |
wlsrChannelFrameTypeStatsEntryChannel Statistics based on Frame Type. WlsrChannelFrameTypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1 |
wlsrChStatsTotMgmtPktsThis attribute indicates the total number of Management packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1 |
wlsrChStatsTotMgmtBytesThis attribute indicates the total number of Management Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2 |
wlsrChStatsTotCtrlPktsThis attribute indicates the total number of Control packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.3 |
wlsrChStatsTotCtrlBytesThis attribute indicates the total number of Control Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.4 |
wlsrChStatsTotDataPktsThis attribute indicates the total number of Data packets observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.5 |
wlsrChStatsTotDataBytesThis attribute indicates the total number of Data Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.6 |
wlsrChannelPktSizeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. SEQUENCE OF WlsrChannelPktSizeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.5 |
wlsrChannelPktSizeStatsEntryChannel Statistics based on the packet sizes. WlsrChannelPktSizeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1 |
wlsrChStatsPkts63BytesThis attribute indicates the total number of packets that were less than 64 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.1 |
wlsrChStatsPkts64To127This attribute indicates the total number of packets that were between 64 and 127 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.2 |
wlsrChStatsPkts128To255This attribute indicates the total number of packets that were between 128 and 255 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3 |
wlsrChStatsPkts256To511This attribute indicates the total number of packets that were between 256 and 511 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4 |
wlsrChStatsPkts512To1023This attribute indicates the total number of packets that were between 512 and 1023 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5 |
wlsrChStatsPkts1024To1518This attribute indicates the total number of packets that were between 1024 and 1518 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.6 |
wlsrStatsStaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.3.4 |
wlsrStaStatsTableThis Table contains all the Aggregate statistics collected for a station. SEQUENCE OF WlsrStaStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.1 |
wlsrStaStatsEntryStation Statistics. WlsrStaStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1 |
wlsrStaAddressMac Address of the Station connected to this Access Point. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1 |
wlsrStaTxPktsThis attribute indicates the total packets Transmitted to the Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2 |
wlsrStaTxBytesThis attribute indicates the total Bytes Transmitted to the Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3 |
wlsrStaRxPktsThis attribute indicates the total packets Received from the Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 |
wlsrStaRxBytesThis attribute indicates the total Bytes Received from the Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 |
wlsrStaTxRetryPktsThis attribute indicates the Retry Packets transmitted by the stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 |
wlsrStaRxRetryPktsThis attribute indicates the Retry Packets received from the stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7 |
wlsrStaTxFragmentedPktsThis attribute indicates the Fragmented Packets transmitted by the station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8 |
wlsrStaRxFragmentedPktsThis attribute indicates the Fragmented Packets Received from the station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.9 |
wlsrStaReceiveErrPktsThis attribute indicates the total Error Packets received from this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.10 |
wlsrStaTxTotSignalThe attribute indicates the total transmitted signal computed for this station.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.11 |
wlsrStaTxSignalPktsThis attribute indicates the total Signal Packets transmitted by this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.12 |
wlsrStaTxCurSignalThis attribute indicate the stations current transmit signal strength.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.13 |
wlsrStaTxHighSignalThis attribute indicate the stations high transmit signal strength.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.14 |
wlsrStaRxTotNoiseTotal Noise.rodeprecated Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.15 |
wlsrStaRxNoisePktsReceived Noise.rodeprecated Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.16 |
wlsrStaRxCurrentNoiseCurrent Noise.rodeprecated Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.17 |
wlsrStaRxHighNoiseHigh Noiserodeprecated Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.18 |
wlsrStaRxLowNoiseLow Noiserodeprecated Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.19 |
wlsrStaFrameRetryRateStation Frame Retry Rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.20 |
wlsrStaFrameLowSpeedRateStation Frame Low speed error rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.21 |
wlsrStaFrameNonUnicastRateStation Frame Non Unicast rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.22 |
wlsrStaFrameRetryErrorRateStation Frame Retry Error Rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.23 |
wlsrStaFrameBandwidthRateStation Frame Bandwidth rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.24 |
wlsrStaFrameFragmentationRateStation Frame Fragmentation Rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.25 |
wlsrStaFrameHighBandwidthRateStation Frame High Bandwidth Rate in kbps.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.26 |
wlsrStaRateStatsTableThis table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. SEQUENCE OF WlsrStaRateStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.2 |
wlsrStaRateStatsEntryStation Rate Stats Table WlsrStaRateStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1 |
wlsrStaTxPktsAt1MbpsThis attribute indicates the number of Packets Transmitted by the station at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.1 |
wlsrStaTxBytesAt1MbpsThis attribute indicates the number of Octets Transmitted by the station at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.2 |
wlsrStaTxPktsAt2MbpsThis attribute indicates the number of Packets Transmitted by the station at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.3 |
wlsrStaTxBytesAt2MbpsThis attribute indicates the number of Octets Transmitted by the station at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.4 |
wlsrStaTxPktsAt5MbpsThis attribute indicates the number of Packets Transmitted by the station at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.5 |
wlsrStaTxBytesAt5MbpsThis attribute indicates the number of Octets Transmitted by the station at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.6 |
wlsrStaTxPktsAt11MbpsThis attribute indicates the number of Packets Transmitted by the station at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.7 |
wlsrStaTxBytesAt11MbpsThis attribute indicates the number of Octets Transmitted by the station at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.8 |
wlsrStaTxPktsAt6MbpsThis attribute indicates the number of Packets Transmitted by the station at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.9 |
wlsrStaTxBytesAt6MbpsThis attribute indicates the number of Octets Transmitted by the station at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.10 |
wlsrStaTxPktsAt12MbpsThis attribute indicates the number of Packets Transmitted by the station at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.11 |
wlsrStaTxBytesAt12MbpsThis attribute indicates the number of Octets Transmitted by the station at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.12 |
wlsrStaTxPktsAt18MbpsThis attribute indicates the number of Packets Transmitted by the station at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.13 |
wlsrStaTxBytesAt18MbpsThis attribute indicates the number of Octets Transmitted by the station at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.14 |
wlsrStaTxPktsAt24MbpsThis attribute indicates the number of Packets Transmitted by the station at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.15 |
wlsrStaTxBytesAt24MbpsThis attribute indicates the number of Octets Transmitted by the station at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.16 |
wlsrStaTxPktsAt36MbpsThis attribute indicates the number of Packets Transmitted by the station at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.17 |
wlsrStaTxBytesAt36MbpsThis attribute indicates the number of Octets Transmitted by the station at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.18 |
wlsrStaTxPktsAt48MbpsThis attribute indicates the number of Packets Transmitted by the station at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.19 |
wlsrStaTxBytesAt48MbpsThis attribute indicates the number of Octets Transmitted by the station at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.20 |
wlsrStaTxPktsAt54MbpsThis attribute indicates the number of Packets Transmitted by the station at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.21 |
wlsrStaTxBytesAt54MbpsThis attribute indicates the number of Octets Transmitted by the station at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.22 |
wlsrStaRxPktsAt1MbpsThis attribute indicates the number of Packets Received by the station at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.23 |
wlsrStaRxBytesAt1MbpsThis attribute indicates the number of Octets Received by the station at 1Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24 |
wlsrStaRxPktsAt2MbpsThis attribute indicates the number of Packets Received by the station at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25 |
wlsrStaRxBytesAt2MbpsThis attribute indicates the number of Octets Received by the station at 2Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26 |
wlsrStaRxPktsAt5MbpsThis attribute indicates the number of Packets Received by the station at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27 |
wlsrStaRxBytesAt5MbpsThis attribute indicates the number of Octets Received by the station at 5Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.28 |
wlsrStaRxPktsAt11MbpsThis attribute indicates the number of Packets Received by the station at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.29 |
wlsrStaRxBytesAt11MbpsThis attribute indicates the number of Octets Received by the station at 11Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.30 |
wlsrStaRxPktsAt6MbpsThis attribute indicates the number of Packets Received by the station at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.31 |
wlsrStaRxBytesAt6MbpsThis attribute indicates the number of Octets Received by the station at 6Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.32 |
wlsrStaRxPktsAt12MbpsThis attribute indicates the number of Packets Received by the station at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.33 |
wlsrStaRxBytesAt12MbpsThis attribute indicates the number of Octets Received by the station at 12Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.34 |
wlsrStaRxPktsAt18MbpsThis attribute indicates the number of Packets Received by the station at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.35 |
wlsrStaRxBytesAt18MbpsThis attribute indicates the number of Octets Received by the station at 18Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.36 |
wlsrStaRxPktsAt24MbpsThis attribute indicates the number of Packets Received by the station at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.37 |
wlsrStaRxBytesAt24MbpsThis attribute indicates the number of Octets Received by the station at 24Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.38 |
wlsrStaRxPktsAt36MbpsThis attribute indicates the number of Packets Received by the station at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.39 |
wlsrStaRxBytesAt36MbpsThis attribute indicates the number of Octets Received by the station at 36Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.40 |
wlsrStaRxPktsAt48MbpsThis attribute indicates the number of Packets Received by the station at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.41 |
wlsrStaRxBytesAt48MbpsThis attribute indicates the number of Octets Received by the station at 48Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.42 |
wlsrStaRxPktsAt54MbpsThis attribute indicates the number of Packets Received by the station at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.43 |
wlsrStaRxBytesAt54MbpsThis attribute indicates the number of Octets Received by the station at 54Mbps rate.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.44 |
wlsrStaDATypeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. SEQUENCE OF WlsrStaDATypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.3 |
wlsrStaDATypeStatsEntryStation Statistics based on the Destination Address Type. WlsrStaDATypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1 |
wlsrStaTxDABroadcastPktsThis attribute indicates the number of Broadcast packets transmitted by this Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.1 |
wlsrStaTxDABroadcastBytesThis attribute indicates the number of Broadcast Bytes transmitted by this Station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.2 |
wlsrStaTxDAMulticastPktsThis attribute indicates the number of Multicast packets transmitted by this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.3 |
wlsrStaTxDAMulticastBytesThis attribute indicates the number of Multicast Bytes transmitted by this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4 |
wlsrStaTxDAUnicastPktsThis attribute indicates the total of Unicast packets transmitted by this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5 |
wlsrStaTxDAUnicastBytesThis attribute indicates the total of Unicast Bytes transmitted by this station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6 |
wlsrStaFrameTypeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. SEQUENCE OF WlsrStaFrameTypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.4 |
wlsrStaFrameTypeStatsEntryStation Frame Type Stats Entry. WlsrStaFrameTypeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1 |
wlsrStaTxMgmtPktsThis attribute indicates the Transmitted Management packets from a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.1 |
wlsrStaTxMgmtBytesThis attribute indicates the Transmitted Management Bytes from a stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.2 |
wlsrStaTxCtrlPktsThis attribute indicates the Transmitted Control packets from a stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.3 |
wlsrStaTxCtrlBytesThis attribute indicates the Transmitted Control Bytes from a stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.4 |
wlsrStaTxDataPktsThis attribute indicates the Transmitted Data packets from a stationro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.5 |
wlsrStaTxDataBytesThis attribute indicates the Transmitted Data Bytes observed on this channel.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.6 |
wlsrStaRxMgmtPktsThis attribute indicates the number of received Management packets at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.7 |
wlsrStaRxMgmtBytesThis attribute indicates the number of received Management Bytes at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.8 |
wlsrStaRxCtrlPktsThis attribute indicates the number of received Control packets at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.9 |
wlsrStaRxCtrlBytesThis attribute indicates the number of received Control Bytes at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10 |
wlsrStaRxDataPktsThis attribute indicates the number of received Data packets at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11 |
wlsrStaRxDataBytesThis attribute indicates the number of received Data Bytes at a station.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12 |
wlsrStaPktSizeStatsTableThis table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. SEQUENCE OF WlsrStaPktSizeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.5 |
wlsrStaPktSizeStatsEntryStation Packet Size Stats. WlsrStaPktSizeStatsEntry .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1 |
wlsrStaTxPkts63BytesThis attribute indicates the number of packets transmitted by the station that were less than 64 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.1 |
wlsrStaTxPkts64To127This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.2 |
wlsrStaTxPkts128To255This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.3 |
wlsrStaTxPkts256To511This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.4 |
wlsrStaTxPkts512To1023This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.5 |
wlsrStaTxPkts1024To1518This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.6 |
wlsrStaRxPkts63BytesThis attribute indicates the number of packets Received by the station that were less than 64 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.7 |
wlsrStaRxPkts64To127This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.8 |
wlsrStaRxPkts128To255This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.9 |
wlsrStaRxPkts256To511This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.10 |
wlsrStaRxPkts512To1023This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.11 |
wlsrStaRxPkts1024To1518This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long.ro Counter32 .1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.12 |
wlsrAirMonitorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.4 |
wlsrAirMonitorApListTableThis table contains all the Access Points monitored by the AM. SEQUENCE OF WlsrAirMonitorApListEntry .1.3.6.1.4.1.14823.2.3.1.1.4.1 |
wlsrAirMonitorApListEntryAp List Entry WlsrAirMonitorApListEntry .1.3.6.1.4.1.14823.2.3.1.1.4.1.1 |
wlsrAmApBSSIDBSSID of the Access Point. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.1 |
wlsrAmSSIDThis attribute indicates the SSID of the AP.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.2 |
wlsrAmChannelThis attribute indicates the channel on which this AP is operating.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3 |
wlsrAmPhysicalTypeThis attribute indicates the physical layer type.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4 |
wlsrAmAccessPointTypeThis attribute indicates the type of AP.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5 |
wlsrAmRAPTypeType of the Access Point.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 |
wlsrAmRSSIAccess point Receiver Signal Strength Indicator.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7 |
wlsrAmMonitoredTimeTime in ticks, since the AM is observing this access point.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.8 |
wlsrAmInactivityTimeAccess point Inactivity Time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.9 |
wlsrAmLoadBalancingThe attributes indicates whether Load balancing is enabled for this access point.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.10 |
wlsrTrapsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.100 |
wlsrTrapObjectsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.3.1.1.100.100 |
wlsrTargetApBSSIDThis Object is used in the traps to indicate the BSSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.1 |
wlsrTargetApSSIDThis Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.100.100.2 |
wlsrTargetApChannelThis Object is used in the traps to indicate the Channel of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.ro INTEGER .1.3.6.1.4.1.14823.2.3.1.1.100.100.3 |
wlsrSourceMacThis Object is used in the traps to indicate the MAC address of the Source.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.4 |
wlsrNodeMacThis Object is used in the traps to indicate the MAC address of a Node.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.5 |
wlsrFrameTypeThis Object is used in the traps to indicate the Frame Type.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.100.100.6 |
wlsrAddressTypeThis Object is used in the traps to indicate the Address Type.ro Enumeration .1.3.6.1.4.1.14823.2.3.1.1.100.100.7 |
wlsrSignatureNameThis Object is used in the traps to indicate the Signature Name.ro OCTET STRING .1.3.6.1.4.1.14823.2.3.1.1.100.100.8 |
wlsrMatchedMacThis Object is used in the traps to indicate the Macaddress.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.9 |
wlsrMatchedIpThis Object is used in the traps to indicate the Ip Address.ro IpAddress .1.3.6.1.4.1.14823.2.3.1.1.100.100.10 |
wlsrReceiverMacThis Object is used in the traps to indicate the MAC address of the Receiver.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.11 |
wlsrTransmitterMacThis Object is used in the traps to indicate the MAC address of the Transmitter.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.3.1.1.100.100.12 |
wlsrRSSIThis Object is used in the traps to indicate the Signal Strength Indicator.ro Integer32 .1.3.6.1.4.1.14823.2.3.1.1.100.100.13 |
wlsrRogueInfoURLThis Object is used to point to the WEBGUI Rogue AP information URL.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.100.100.14 |
wlsrInterferingAPInfoURLThis Object is used to point to the WEBGUI Rogue interfering AP information URL.ro DisplayString .1.3.6.1.4.1.14823.2.3.1.1.100.100.15 |
wlsrUnsecureApDetectedThis trap indicates that an Unsecure Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1001 |
wlsrStaImpersonationThis trap indicates that an AM at location wlsrLocation detected a Station impersonation. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1002 |
wlsrReservedChannelViolationThis trap indicates that an Access Point is detected by an AP at location wlsrLocation, which violates the Reserved Channel configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1003 |
wlsrValidSSIDViolationThis trap indicates that an Access Point violating Valid SSID is detected by an AP at wlsrLocation. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1004 |
wlsrChannelMisconfigurationThis trap indicates that an Access Point has a bad channel configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1005 |
wlsrOUIMisconfigurationThis trap indicates that an Access Point has bad OUI configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1006 |
wlsrSSIDMisconfigurationThis trap indicates that an Access Point has bad SSID configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1007 |
wlsrShortPreableMisconfigurationThis trap indicates that an Access Point has bad Short preamble configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1008 |
wlsrWPAMisconfigurationThis trap indicates that an Access Point has bad WPA configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1009 |
wlsrAdhocNetworkDetectedThis trap indicates that an AM has detected an Adhoc network. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1010 |
wlsrStaPolicyViolationThis trap indicates that a Valid Station policy is violated. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1011 |
wlsrRepeatWEPIVViolationThis trap indicates that an AP/AM detected a Repeat WEP-IV violation. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1012 |
wlsrWeakWEPIVViolationThis trap indicates that an AP/AM detected a Weak WEP-IV violation. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1013 |
wlsrChannelInterferenceDetectedThis trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1014 |
wlsrAPInterferenceDetectedThis trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1015 |
wlsrStaInterferenceDetectedThis trap indicates that an AM/AP located at wlsrLocation has detected a Station interference on wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1016 |
wlsrFrameRetryRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1017 |
wlsrFrameReceiveErrorRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Receive Error Rate for AP wlsrTargetApBSSID. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1018 |
wlsrFrameFragmentationRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Fragmentation Rate for AP wlsrTargetApBSSID. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1019 |
wlsrFrameBandWidthRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the allocated Bandwidth rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1020 |
wlsrFrameLowSpeedRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Low speed rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1021 |
wlsrFrameNonUnicastRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Non Unicast traffic rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1022 |
wlsrLoadbalancingEnabledThis trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has enabled Load balancing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1023 |
wlsrChannelFrameRetryRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Retry Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1024 |
wlsrChannelFrameFragmentationRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Fragmentation Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1025 |
wlsrChannelFrameErrorRateExceededThis trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Error Rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1026 |
wlsrSignatureMatchThis trap indicates that we detected a signature match. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1027 |
wlsrChannelRateAnomalyThis trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1028 |
wlsrNodeRateAnomalyThis trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType transmitted by node wlsrNodeMac which exceeds the configured IDS rate threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1029 |
wlsrEAPRateAnomalyThis trap indicates that the number of EAP Handshake packets received by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake rate. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1030 |
wlsrSignalAnomalyThis trap indicates that an AP/AM at wlsrLocation detected a Signal Anomaly on wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1031 |
wlsrSequenceNumberAnomalyThis trap indicates that an AP/AM at wlsrLocation received packets which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1032 |
wlsrDisconnectStationAttackThis trap indicates that an AP/AM detected a station Disconnect attack. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1033 |
wlsrApFloodAttackThis trap is triggered when the number of spurious AP's detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1034 |
wlsrAdhocNetworkThis trap indicates that an AP/AM at wlsrLocation detected an Adhoc Network. Node wlsrSourceMac is connected to an adhoc AP wlsrTargetApBSSID with wlsrTargetApSSID ssid. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1035 |
wlsrWirelessBridgeThis trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1036 |
wlsrInvalidMacOUIThis trap indicates that an AP/AM at wlsrLocation detected an Invalid MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is the <wlsrAddressType>. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1037 |
wlsrLoadbalancingDisabledThis trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled Load balancing. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1038 |
wlsrWEPMisconfigurationThis trap indicates that an Access Point has bad WEP configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1039 |
wlsrStaRepeatWEPIVViolationThis trap indicates that an AP/AM detected a Repeat WEP-IV violation. for a Station NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1040 |
wlsrStaWeakWEPIVViolationThis trap indicates that an AP/AM detected a Weak WEP-IV violation. for a Station NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1041 |
wlsrStaAssociatedToUnsecureApThis trap indicates that a station with wlsrNodeMac associated with an Unsecure Access Point wlsrTargetApBSSID. This is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1042 |
wlsrAdhocNetworkBridgeDetectedThis trap indicates that an AM has detected an Adhoc network that is bridging to a wired network NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1043 |
wlsrInterferingApDetectedThis trap indicates that an Interfering Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.3.1.1.100.1044 |