VERTICAL15-1600ROUTER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for VERTICAL15-1600ROUTER-MIB.
25
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
vertical OBJECT IDENTIFIER .1.3.6.1.4.1.2338 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2338 |
v1600CardNotReadyNotification sent when the 1600-Router card is not ready at boot time. TRAP-TYPE .1.3.6.1.4.1.2338.0.68 |
v1600FlashCardNotReadyThe Flash card on the 1600-Router Card is either removed or not inserted properly.
Please insert the Flash Card after you power down the system. TRAP-TYPE .1.3.6.1.4.1.2338.0.69 |
v1600FlashCardReadyTrapThe Flash card on the 1600-Router Card has been re-inserted. TRAP-TYPE .1.3.6.1.4.1.2338.0.76 |
v1600RouterReadyThe Router is ready and has booted from the image on the Flash Card. TRAP-TYPE .1.3.6.1.4.1.2338.0.77 |
v1600RouterNotReadyThe Router is has not booted from the image on the Flash Card or the system
is still booting. Please open the 1600-Router console and make sure that the
Router boots from the image on the Flash Card for normal operation of the system. TRAP-TYPE .1.3.6.1.4.1.2338.0.78 |
v1600Router OBJECT IDENTIFIER .1.3.6.1.4.1.2338.15 |
v1600InstalledSlotThe slot number in which the 1600-Router Card is installed.ro INTEGER .1.3.6.1.4.1.2338.15.1 |
v1600Ser0ChannelWidthThe number of channels used by the internal interface (S0) to connect to T1.ro INTEGER .1.3.6.1.4.1.2338.15.2 |
v1600Ser0T1InterfaceSlotSlot number of T1 card configured for the WAN interface.ro INTEGER .1.3.6.1.4.1.2338.15.3 |
v1600Ser0T1InterfacePortPort number of the T1 card configured for WAN interface.ro INTEGER .1.3.6.1.4.1.2338.15.4 |
v1600Ser0T1InterfaceStartChanStarting channel used by the internal interface (S0) to T1.ro INTEGER .1.3.6.1.4.1.2338.15.5 |
v1600FlashCardReadyReady = Flash card inserted , Not Ready = Flash card removed.ro Enumeration .1.3.6.1.4.1.2338.15.6 |
v1600CardReadyLEDOn= 1600-Router Card is fully operational, Off=1600-Router Card is not Ready.ro Enumeration .1.3.6.1.4.1.2338.15.7 |
v1600CardErrorLEDOn= 1600-Router Card is not ready, Off=1600-Router Card is Ready.ro Enumeration .1.3.6.1.4.1.2338.15.8 |
v1600RouterOKLEDRouter OK LED Status. This variable is no longer used and will be
deprecated in the next release.ro Enumeration .1.3.6.1.4.1.2338.15.9 |
v1600ExtSerial1ConnOKShows whether a cable is connected to the 5-in-1 External
Serial(S1) Connector. on=Connected , off=Not Connectedro Enumeration .1.3.6.1.4.1.2338.15.10 |
v1600ExtSerial1DCDShows the status of 5-in-1 External Serial(S1) DCD LED.
on=Link is up, off=Link is downro Enumeration .1.3.6.1.4.1.2338.15.11 |
v1600SwitchSlotNumSwitch port Slot number. This variable is no longer used and will be
deprecated in the next release.ro INTEGER .1.3.6.1.4.1.2338.15.12 |
v1600EthSwitchedPortsNumber of Swithced Ethernet ports on 1600-Router Card.ro INTEGER .1.3.6.1.4.1.2338.15.13 |
v1600SwitchStatMore Information about Switch Port statistics. This variable is no
longer used and will be deprecated in the next release.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2338.15.14 |
v1600IntSerial0ConnOKInternal WAN interface (S0) connection to T1 LED status.ro Enumeration .1.3.6.1.4.1.2338.15.15 |
v1600IntSerial0DCDInternal WAN interface (S0) Link LED status.
on=Link is up, off=Link is down.ro Enumeration .1.3.6.1.4.1.2338.15.16 |
v1600RouterEthLinkOKShows status of internal Ethernet Interface (E0) LED.
on=Link is up , off=Link is downro Enumeration .1.3.6.1.4.1.2338.15.17 |