VERTICAL-std-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for VERTICAL-std-MIB.
41
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
vertical OBJECT IDENTIFIER .1.3.6.1.4.1.2338 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2338 |
stdCompFailedToStartThis notification is sent when a component fails
to start during initial start-up. TRAP-TYPE .1.3.6.1.4.1.2338.0.26 |
stdCompAttemptRestartThis notification is sent when the Self Test Daemon
attempts to restart a component. TRAP-TYPE .1.3.6.1.4.1.2338.0.27 |
stdCompFailedToReStartThis notification is sent when an attempt to restart
a component failed. TRAP-TYPE .1.3.6.1.4.1.2338.0.28 |
stdCompRestartCompleteThis notification is sent when a component is
successfully restarted TRAP-TYPE .1.3.6.1.4.1.2338.0.29 |
stdUpgradeStartedThis notification is sent when an Instant Office
upgrade is started. The stages of an upgrade and
restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.30 |
stdUnpackingFilesThis notification is sent when unpacking of the
upgraded CAB file starts.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.31 |
stdUnpackingCompleteThis notification is sent when unpacking of the
upgraded CAB file is complete. The stages of an
upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.32 |
stdUpgradeBeingAppliedThis notification is sent when an Instant Office
upgrade is about to be applied. This is done after
the Upgraded CAB file is unpacked and a system
reboot is done.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.33 |
stdUpgradeInProgressThis notification is sent when an Instant Office
upgrade process is under way.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.34 |
stdUpgradeCompleteThis notification is sent when an Instant Office
upgrade is successfully completed.
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.35 |
stdUpgradeErrorThis notification is sent when an Instant Office
upgrade attempt fails. A Restore operation would
be done immediately.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.36 |
stdRestoreStartedThis notification is sent when a previous version
of Instant Office is about to be restored. A
restore operation is typically carried out
after a failed upgrade attempt.
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.37 |
stdRestoreInProgressThis notification is sent when a previous version of
Instant Office is restored successfully. A restore
operation is typically carried out after a failed
upgrade attempt.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.38 |
stdRestoreCompleteThis notification is sent when a previous version
of Instant Office is restored successfully. A
restore operation is typically carried out after
a failed upgrade attempt.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.39 |
stdRestoreErrorThis notification is sent when an Instant Office
restore attemp fails.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.40 |
stdRebootingMachineThis notification is sent before an Instant Office
reboot is done, typically due to an
upgrade/restore request.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.41 |
stdVerifyingSystemThis notification is sent when the System is brought
up (all componenets are started) after an Upgrade or
a restore process.
The stages of an upgrade and restore are :
1. An Upgrade request comes in: CAB file is
pushed - stdUpgradeStarted Trap is sent
2. Unpacking of the CAB file is done -
stdUnpackingFiles Trap is sent
3. Multiple stdUpgradeInProgress Traps are sent
during this period
4. Unpacking is complete - stdUnpackingComplete
Trap is sent
5. A system reboot is done - stdRebootingMachine
Trap is sent
6. Upgrade is applied - stdUpgradeBeingApplied
Trap is sent.
7. Multiple stdUpgradeInProgress Traps are sent
during this period
8. System is rebooted again - stdRebootingMachine
Trap is sent.
9. All components are started - stdVerifyingSystem
Trap is sent.
10. If success: stdUpgradeComplete Trap is sent :
All is well Else ,stdUpgradeError Trap is
sent, and a restore operation is attempted
11. Restore is attempted - stdRestoreStarted Trap
is sent
12. Multiple stdRestoreInProgress Traps are sent
at this point.
13. A system reboot is done : stdRebootingMachine
Trap is sent.
14. All components are started - stdVerifyingSystem
Trap is sent.
15. If success: stdRestoreComplete Trap is sent,
else stdRestoreError Trap is sent. std quits
at this point TRAP-TYPE .1.3.6.1.4.1.2338.0.42 |
stdIOUptoDateThis notification is sent when an upgrade attempt
is aborted because the current version of Instant
Office is later than the upgrade version. TRAP-TYPE .1.3.6.1.4.1.2338.0.50 |
stdBadCABFileThis notification is sent when an upgrade attempt
is aborted because of a bad CAB file. TRAP-TYPE .1.3.6.1.4.1.2338.0.51 |
stdNotEnoughDiskSpaceThis notification is sent when an upgrade attempt
is aborted because there is not enough disk
space on the machine. TRAP-TYPE .1.3.6.1.4.1.2338.0.52 |
stdIoNotOperationalThis notification is sent under any of the
following conditions:
- Before attempting to start the components, FBS
checks to ensure the minimum configuration is
present in the box, currently this means an RSC
card in Slot_05. If this check fails, FBS will
not attempt to start any of the components and
needs to send a trap out to the world!
- When FBS attempts to start all components and a
critical component fails to start and hence
InstantOffice is not operational, FBS needs to send
the trap.
- After an upgrade is performed and deemed unsuccessful,
FBS will attempt to restore to the previous working
version. In case this process fails, FBS needs to
send the trap. TRAP-TYPE .1.3.6.1.4.1.2338.0.63 |
stdPrerequisiteMissingThis notification is sent when an upgrade attempt is
done on an Instant Office that does not contain the
pre-requisite software version for that upgrade. TRAP-TYPE .1.3.6.1.4.1.2338.0.67 |
stdPLDFailedResource Card Firmware upgrade failed.
Return code=nnnn TRAP-TYPE .1.3.6.1.4.1.2338.0.70 |
stdUnsupportedConfigurationYou are running an unsupported configuration.
1600-Router card requires a newer version of
the Resource Switch Card. TRAP-TYPE .1.3.6.1.4.1.2338.0.71 |
stdInvalidConfigurationYou are running an invalid configuration.
1600-Router card will be disabled since
there are more than 2 Station Cards present. TRAP-TYPE .1.3.6.1.4.1.2338.0.72 |
selfTestDaemon OBJECT IDENTIFIER .1.3.6.1.4.1.2338.8 |
stdSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.8.1 |
sysOperStatusSpecifies the current operational status of
the Instant Office system. Valid values are:
running (1) -> The normal
operational status,
all components are
up and running.
startUpInProgress (2) -> The ST Deamon is
starting up the
system.
upgradeInProgress (3) -> The ST Daemon is
attempting to
upgrade the system.
restoreInProgress (4) -> The ST Daemon is
attemping to restore
the system from a
previous installation,
after an upgrade
attemp failed.
error (5) -> An error condition.
One or more
components failed
to start. More
information can be
found from the
Component Tablero Enumeration .1.3.6.1.4.1.2338.8.1.1 |
sysCurrentVersionSpecifies the current Instant Office
version on this system.ro DisplayString .1.3.6.1.4.1.2338.8.1.2 |
stdComponentGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.8.2 |
stdComponentTableTable of status information about all Instant
Office components (executables, services and
drivers). There are as many entries as there
are components in the system. SEQUENCE OF STDComponentEntry .1.3.6.1.4.1.2338.8.2.1 |
stdComponentEntryAn entry in the Component table. STDComponentEntry .1.3.6.1.4.1.2338.8.2.1.1 |
compIndexThe index of the componentro INTEGER .1.3.6.1.4.1.2338.8.2.1.1.1 |
compNameThe name of the componentro DisplayString .1.3.6.1.4.1.2338.8.2.1.1.2 |
compTypeThe Component type - defines whether this
component is a driver, service or an
executable. The following the valid
values:
type-driver = 1,
type-service = 16,
type-executable = 2000,
type-non-vni-driver = 2001,
type-non-vni-service = 2002,
type-non-vni-executable = 2003ro Enumeration .1.3.6.1.4.1.2338.8.2.1.1.3 |
compInstallStatusDescribes the installation status of this
component. The following the valid values:
uninstalled = 100,
installed = 1ro Enumeration .1.3.6.1.4.1.2338.8.2.1.1.4 |
compOperStatusThe operational status of this component.
The following the valid
values:
stopped =1,
start-pending =2,
stop-pending =3,
running =4 (the normal operational state),
continue-pending =5,
pause-pending =6,
paused =7,
unknown =8,
disabled =1025ro Enumeration .1.3.6.1.4.1.2338.8.2.1.1.5 |
compEnabledDetermines whether this component is
enabled or disabled.
Valid values:
enabled = 100,
disabled = 1ro Enumeration .1.3.6.1.4.1.2338.8.2.1.1.6 |
compLastStartThe date-time stamp when this component
was last restarted.ro DisplayString .1.3.6.1.4.1.2338.8.2.1.1.7 |