VERTICAL-STATION-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for VERTICAL-STATION-MIB.
71
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
vertical OBJECT IDENTIFIER .1.3.6.1.4.1.2338 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2338 |
vStationCannotPlayToneThis notification is sent when the specific
channel cannot play tone. TRAP-TYPE .1.3.6.1.4.1.2338.0.12 |
vStationCannotCancelToneThis notification is sent when the specific
channel cannot cancel tone. TRAP-TYPE .1.3.6.1.4.1.2338.0.13 |
vStationCannotAttachDigitCollectorThis notification is sent when the specific
channel cannot attach digits collected TRAP-TYPE .1.3.6.1.4.1.2338.0.14 |
vStationCannotReleaseDigitCollectorThis notification is sent when the specific
channel cannot release digits collected TRAP-TYPE .1.3.6.1.4.1.2338.0.15 |
vStationRECONFIG-COMPLETEThis notification is sent when the specific
station device successfully reads and incorporates the
values from the registry. TRAP-TYPE .1.3.6.1.4.1.2338.0.16 |
vStationRECONFIG-ERRORThis notification is sent when the specific
station device fails to incorporate the values read from
the registry. TRAP-TYPE .1.3.6.1.4.1.2338.0.17 |
vStationModule OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7 |
vStationCommonGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7.1 |
vStationFirstDigitTimeoutSpecifies the maximum number of seconds to wait for
the first digit.rw INTEGER .1.3.6.1.4.1.2338.7.1.1 |
vStationDigitTimeoutSpecifies the maximum number of seconds to wait
between digits.rw INTEGER .1.3.6.1.4.1.2338.7.1.2 |
vStationOffHookTimeoutSpecifies the maximum number of seconds to wait for
the user to hang up phone after call disconnects or user
executes an invalid operation. Howler tone is applied at
timeout.rw INTEGER .1.3.6.1.4.1.2338.7.1.3 |
vStationNumStationCardsSpecifies the number of station cards installed in
the system.rw INTEGER .1.3.6.1.4.1.2338.7.1.4 |
vStationExternalDialDigitIdentifies the starting digit for making an external
call.rw DisplayString .1.3.6.1.4.1.2338.7.1.5 |
vStationCardGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7.2 |
vStationCardTableTable of status, control and configuraion about
cards containing station devices within the system.
There are as many entries as there are cards containing
station devices SEQUENCE OF VStationCardEntry .1.3.6.1.4.1.2338.7.2.1 |
vStationCardEntryAn entry in the Vertical Station Card table. VStationCardEntry .1.3.6.1.4.1.2338.7.2.1.1 |
vStationCardSlotNumberPhysical slot in the system in which the
card is installed.ro INTEGER .1.3.6.1.4.1.2338.7.2.1.1.1 |
vStationCardTypeThe Vertical's card Type. The following types are defined:
card-type-NOT-CONFIGURED = 0,
card-type-24-CHANNEL-STATION = 2,
card-type-BRIDGE1 = 4ro Enumeration .1.3.6.1.4.1.2338.7.2.1.1.2 |
vStationCardIOPortAddressThe ISA bus base address for this Card.ro INTEGER (0..'7fffffff'h) .1.3.6.1.4.1.2338.7.2.1.1.3 |
vStationCardStateThe current status of the card. The valid
values are 0 -> Disabled,
1 -> Enabled,
0xff -> Removed.ro Enumeration .1.3.6.1.4.1.2338.7.2.1.1.4 |
vStationCardErrorLEDAll Vertical cards have an ERROR LED and
a READY LED. The combined values of these
LEDs are as follows -
ERRORLed READYLed VALUE OPERATIONAL DEFINITION
OFF OFF (0 0) Invalid state
ON OFF (1 0) Just after power up. This state
remains until card is
ready to service io.
ON ON (1 1) Statue during software initialization
OFF ON (0 1) The normal operational state
of the card.ro INTEGER .1.3.6.1.4.1.2338.7.2.1.1.5 |
vStationCardReadyLEDAll Vertical cards have a READY LED and
an ERROR LED. The combined values of these
LEDs are as follows -
ERRORLed READYLed OPERATIONAL DEFINITION
OFF OFF invalid state
ON OFF Just after power up. This
state remains until card is
ready to service io.
ON ON Statue during software initialization
OFF ON The normal operational state of the card.ro INTEGER .1.3.6.1.4.1.2338.7.2.1.1.6 |
vStationDeviceTableTable of status, control and configuraion about
station devices within the system. There are as
many entries as there are station devices. SEQUENCE OF VStationDeviceEntry .1.3.6.1.4.1.2338.7.2.2 |
vStationDeviceEntryAn entry in the Vertical Station device Configuration
table. VStationDeviceEntry .1.3.6.1.4.1.2338.7.2.2.1 |
vStationDeviceSlotNumberPhysical slot number inside the system in
which the card containing this device is
installedro INTEGER .1.3.6.1.4.1.2338.7.2.2.1.1 |
vStationDeviceDeviceNumberThe logical device number for this station
device in its card.ro INTEGER .1.3.6.1.4.1.2338.7.2.2.1.2 |
vStationDeviceIfIndexThe interface Index for this device. The value for this object
correlates to the IfIndex found in MIB-II.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.2338.7.2.2.1.3 |
vStationDeviceBaseIOAddressThe ISA bus base address for this Card.ro INTEGER (0..'7fffffff'h) .1.3.6.1.4.1.2338.7.2.2.1.4 |
vStationDeviceEnabledSetting this variable to Disabled will
disable this particular station device.rw Enumeration .1.3.6.1.4.1.2338.7.2.2.1.5 |
vStationDeviceInterruptInterrupt Request level for this card.ro INTEGER .1.3.6.1.4.1.2338.7.2.2.1.6 |
vStationDeviceNumChannelsThe ISA bus address for this Card.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.2338.7.2.2.1.7 |
vStationDeviceMVIPStartingChannelVertical card revision level.ro INTEGER .1.3.6.1.4.1.2338.7.2.2.1.8 |
vStationDeviceMVIPStreamVertical card identification number.ro INTEGER .1.3.6.1.4.1.2338.7.2.2.1.9 |
vStationDeviceTypeSpecifies the Type of this device
Valid values are :
dev-undef, // 0 : undefined
dev-station, // 8 : Station channelsro Enumeration .1.3.6.1.4.1.2338.7.2.2.1.10 |
vStationDeviceChangePendingInterrupt Request level for this card/trunk.rw INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.2338.7.2.2.1.11 |
vStationChannelTableTable of status, control and configuraion about
station device channels within the system. There is
an entry for each channel of each station device. SEQUENCE OF VStationChannelEntry .1.3.6.1.4.1.2338.7.2.3 |
vStationChannelEntryAn entry in the Vertical Station device Configuration
table. VStationChannelEntry .1.3.6.1.4.1.2338.7.2.3.1 |
vStationChannelIndexThis is the logical channel number of the
channel within its station device.
For 12 channel station devices, it is between 1 and 12
and for 24 channel stations, it is between 1 and 24.ro INTEGER .1.3.6.1.4.1.2338.7.2.3.1.1 |
vStationChannelSlotNumberThe value for this object is the
logical number of the slot in which the
card containing this channel is located (vStationDeviceSlotNumber).ro INTEGER .1.3.6.1.4.1.2338.7.2.3.1.2 |
vStationChannelDeviceNumberThe value for this object is the logical device number of
the device containing this channel within its slot,
ie vStationDeviceDeviceNumberro INTEGER .1.3.6.1.4.1.2338.7.2.3.1.3 |
vStationChannelChannelTypeThe Channel Type. Valid values
are 1 -> Loop Startrw Enumeration .1.3.6.1.4.1.2338.7.2.3.1.4 |
vStationChannelMWITypeDefines the type of Message Waiting Indication. The
valid values are :
1 -> stutter,
2 -> lamp.rw Enumeration .1.3.6.1.4.1.2338.7.2.3.1.5 |
vStationChannelOperationModeDefines the operation mode of the channel.
Valid values are :
1 -> station,
2 -> voiceMail,
3 -> PBX.rw Enumeration .1.3.6.1.4.1.2338.7.2.3.1.6 |
vStationChannelStateIndicates the operational status of this channel.
Valid values are:
0 -> disabled,
1 -> enabled,
2 -> not configuredrw Enumeration .1.3.6.1.4.1.2338.7.2.3.1.7 |
vStationChannelTypeThe phone type for this particular channel.
Valid values are:
1 -> basic,
2 -> callerID,
3 -> callerID-callWaiting (caller ID with call waiting).rw Enumeration .1.3.6.1.4.1.2338.7.2.3.1.8 |
vStationChannelCallStateIndicates the phone call state of this channel.
Valid values are:
call-state-VOID (0), -> invalid state
call-state-IDLE (1), -> the line is in idle state
call-state-DIALING (2), -> the line is originating a call
call-state-COLLECT-FIRST-DIGIT (3), -> waiting to collect the first digit
call-state-COLLECT-DIGITS (4), -> collecting additional digits
call-state-CALL-OFFERED (5), -> the station call request has been offered to the PBX control
call-state-PROCEEDING (6), -> the call is in progress
call-state-RINGING (7), -> the call has seized a destination line
call-state-ALERTING (8), -> the destination has been seized
call-state-CONNECTED (9), -> the destination has answered the call
call-state-DISCONNECTING (10), -> the call is in the process of terminating
call-state-FAILED (11), -> the call attempt failed, wait for hangup
call-state-UNAVAILABLE (12), -> destination is not available to receive call
call-state-OFFHOOK (13), -> the call has been completed but the phone is offhook
call-state-INITIALIZE (14), -> initialize the call object (binds with Conn Mgr)
call-state-INITIALIZING (15), -> waiting for the response from Conn Mgr (Inservice Ack)
call-state-DIAL-REQUEST (16), -> call object sent up OffhookInd and waiting for ACK
call-state-HELD (17), -> the call has been put on hold
call-state-FEATURE-INVOKED (18), -> indications that a feature has been invoked and waiting response
call-state-OFFHOOK-IDLE (19), -> indicates that the phone is set to offhook and is IDLE
call-state-OFFHOOK-ACTIVE (20), -> indicates that the phone is set to offhook and is ACTIVE
call-state-OUT-OF-SERVICE (21), -> indicates that the phone is out of service
call-state-OUTPULSING (22), -> digits are being sent to the external key or voice mail systemro Enumeration .1.3.6.1.4.1.2338.7.2.3.1.9 |
vStationChannelCalledPartyNumberIndicates the called party number, either an internal
extension or external number.ro DisplayString .1.3.6.1.4.1.2338.7.2.3.1.10 |
vStationChannelCallingPartyNumberIndicates the calling party number, either an internal
extension or external number.ro DisplayString .1.3.6.1.4.1.2338.7.2.3.1.11 |
vStationChannelChangePendingIndicates that a change to the channel
values have been made to the registry.
The intepretation of the values are :
1 => change made to the registry, but
not incorporated in the device yet
0 => the device changes the value to 0
from 1, after it incorporates the
value from registry.rw INTEGER .1.3.6.1.4.1.2338.7.2.3.1.12 |
vStationDigitTableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7.3 |
vStationFirstDigitTableTable of settings for each digits (0-9) which
may be dialled as the first digit. There are
10 entries, one for each digit, in this table. SEQUENCE OF VStationFirstDigitEntry .1.3.6.1.4.1.2338.7.3.1 |
vStationFirstDigitEntryAn entry in the Vertical Station First Digit Table. VStationFirstDigitEntry .1.3.6.1.4.1.2338.7.3.1.1 |
vStationDigitIndexThis is the index to an entry in the
first digit tablero INTEGER .1.3.6.1.4.1.2338.7.3.1.1.1 |
vStationDigitStringThe first digit string . Valid values :
'0' to '9'ro OCTET STRING .1.3.6.1.4.1.2338.7.3.1.1.2 |
vStationDigitCallTypeType of call generated by this digit.
Valid values are :
fc-VOID (0), // undefined feature code
fc-HOLD-CALL (1),
fc-PARK-CALL (2),
fc-STATION-CALL (3),
fc-LONG-DISTANCE-CALL (4),
fc-INTERNATIONAL-CALL (5),
fc-LOCAL-CALL (6),
fc-OPERATOR-CALL (7),
fc-RECEPTIONIST-CALL (8),
fc-CAMP-ON-CALL (9)rw Enumeration .1.3.6.1.4.1.2338.7.3.1.1.3 |
vStationDigitMoreDigitsThe number of additional digits to collect after the
matched digits.rw INTEGER .1.3.6.1.4.1.2338.7.3.1.1.4 |
vStationDigitTimeout2Indicates whether the dialling should terminate on a
timeout. valid values are :
dontTerminate -> 0
terminate -> 1rw Enumeration .1.3.6.1.4.1.2338.7.3.1.1.5 |
vStationDigitStripDigitsIndicates the number of leading digits to
strip from the digitss collected before they are
reported up to the connection manager.rw INTEGER .1.3.6.1.4.1.2338.7.3.1.1.6 |
vStationExtVoiceMailGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7.4 |
vStationATTSystem25Group OBJECT IDENTIFIER .1.3.6.1.4.1.2338.7.4.1 |
vStationMWILampONCommand expected from the external voice mail
system to turn on a station's lamp.rw DisplayString .1.3.6.1.4.1.2338.7.4.1.1 |
vStationMWILampOFFCommand expected from the external voice mail
system to turn off a station's lamp.rw DisplayString .1.3.6.1.4.1.2338.7.4.1.2 |
vStationVMCallHandleTableTable of settings and commands for accessing the
voice mail port for different types of access,
i.e. external caller coming directly to voice mail port,
external caller being forwarded to a voice mail port, etc. SEQUENCE OF VStationVMCallHandleEntry .1.3.6.1.4.1.2338.7.4.1.3 |
vStationVMCallHandleEntryAn entry in the Vertical Station Voice Mail call handle table. VStationVMCallHandleEntry .1.3.6.1.4.1.2338.7.4.1.3.1 |
vStationVMCallHandleIndexThis is the index to an entry in the
Voice Mail call handle table.ro INTEGER .1.3.6.1.4.1.2338.7.4.1.3.1.1 |
vStationVMCallHandleTypeIndicates the type of access to voice mail port made.
valid values are :
directExternal (1) -> An external caller coming directly into the
voice mail port.
forwardExternal (2) -> An external caller caling an extension, but
was then forwarded to the voice mail port.
directInternal (3) -> An internal caller coming directly into the
voice mail port.
forwardInternal (4) -> An internal caller caling an extension, but
was then forwarded to the voice mail port.ro Enumeration .1.3.6.1.4.1.2338.7.4.1.3.1.2 |
vStationVMCallHandleOpcodeThe opcode string for this operation.rw OCTET STRING .1.3.6.1.4.1.2338.7.4.1.3.1.3 |
vStationVMCallHandleSRCNumberThe source number format string. It contains
a C type '%s' where the source number would
be filled inrw OCTET STRING .1.3.6.1.4.1.2338.7.4.1.3.1.4 |
vStationVMCallHandleDSTNumberThe destination number format string. It contains
a C type '%s' where the destination number would
be filled inrw OCTET STRING .1.3.6.1.4.1.2338.7.4.1.3.1.5 |