Unisphere-Data-ACCOUNTING-MIB
AI MIB Summary
The Unisphere-Data-ACCOUNTING-MIB extends RFC 2513 Connection Oriented Accounting capabilities to monitor session establishment, termination, and data transfer volumes for Unisphere Networks enterprise devices. It specifically tracks connection-oriented accounting metrics such as active session counts, octet transfers, and packet counts to facilitate usage reporting and billing enforcement.
The accounting MIB for the Unisphere Networks enterprise. This MIB augments the Connection Oriented Accounting MIB (ACCOUNTING-CONTROL- MIB) specified in RFC2513.
Main OID:
usdAcctngMIB.1.3.6.1.4.1.4874.2.2.24
71
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
usdAcctngMIBThe accounting MIB for the Unisphere Networks enterprise. This
MIB augments the Connection Oriented Accounting MIB (ACCOUNTING-CONTROL-
MIB) specified in RFC2513. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.24 |
usdAcctngMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1 |
usdAcctngSelectionControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.1 |
usdAcctngSelectionTableA list of accounting information selection entries.
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval. Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection. SEQUENCE OF UsdAcctngSelectionEntry .1.3.6.1.4.1.4874.2.2.24.1.1.1 |
usdAcctngSelectionEntryAn entry used to extend the the selection entry in
acctngSelectionEntry. This conceptual row extension is used for
Unisphere accounting extensions for connectionless data collection. UsdAcctngSelectionEntry .1.3.6.1.4.1.4874.2.2.24.1.1.1.1 |
usdAcctngSelectionTypeIndicates the types of connections for which the information selected
by this entry are to be collected. The ietfAccountControl(0) bit
position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType
in the base conceptual row determines the selection type. All other bit
positions for this object over-ride the acctngSelectionType in the base
conceptual row. When the value of this object over-rides the
acctngSelectionType object, the following objects have no meaning:
ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts
ACCOUNTING-CONTROL-MIB.acctngFileMinAge
because they control or are related to connection oriented accounting.rw Bits .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1 |
usdAcctngSelectionModeIndicates the data collection mode.rw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2 |
usdAcctngSelectionSubtreeTypeIndicates the origin of the collection, given the row's subtree. The
architecture implementation for statistics collection imposes that rows
with distinct usdAcctngSelectionSubtreeType may not be collected into the
same accounting file. Conversely, different files (configured from
acctngSelectionFile) entries are necessary in order to collect from
subtrees (configured from acctngSelectionSubtree) that imply into
different subtree types (usdAcctngSelectionSubtreeType).rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3 |
usdAcctngSelectionMaxIfStackLevelsIndicates the maximum number of levels in the ifStack table to be
returned when using the ifStack accounting schema. This object is
ignored if acctngSelectionSubtree is not set to
usdAcctngSelectionSchemaIfStack. When this object is zero, the entire
stack above the starting point(s) given will be returned. When this
object is set to 1, only ifIndexes stacked above the starting point(s)
given will be returned.rw Integer32 .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4 |
usdAcctngSelectionPolicyNameSpecifies the name of the policy associated with the statistics
collected when using the policy accounting schema. This object is
ignored if acctngSelectionSubtree is not set to
usdAcctngSelectionSchemaPolicy.rw DisplayString .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5 |
usdAcctngSelectionPolicyTypeSpecifies the attachment point for the policy associated with the
statistics collected when using the policy accounting schema. This
object is ignored if acctngSelectionSubtree is not set to
usdAcctngSelectionSchemaPolicy.rw UsdPolicyAttachmentType (Unisphere-Data-POLICY-MIB) .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6 |
usdAcctngSelectionIfStackStartTableA list of ifIndexes to be used as starting point when using the ifStack
selection schema.
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval. Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection. SEQUENCE OF UsdAcctngSelectionIfStackStartEntry .1.3.6.1.4.1.4874.2.2.24.1.1.3 |
usdAcctngSelectionIfStackStartEntryAn entry used to determine the starting point entry when using the
ifStack schema. UsdAcctngSelectionIfStackStartEntry .1.3.6.1.4.1.4874.2.2.24.1.1.3.1 |
usdAcctngSelectionIfStackIfIndexThe ifIndex to be used as a starting point in the interface stack
configuration. The interfaces to be returned in the ifStack schema will
start from this value, going up. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1 |
usdAcctngSelectionIfStackRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2 |
usdAcctngFileControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.2 |
usdAcctngFileTableA unique value identifying the file transfer behavior and the the file
to where accounting data is to be stored. SEQUENCE OF UsdAcctngFileEntry .1.3.6.1.4.1.4874.2.2.24.1.2.1 |
usdAcctngFileEntryAn entry used to extend the file management of acctngFileEntry. This
conceptual row extension is used for Unisphere accounting extensions to
automate the transfer of accounting data to remote hosts. UsdAcctngFileEntry .1.3.6.1.4.1.4874.2.2.24.1.2.1.1 |
usdAcctngFileXferModeIndicates the mode to use for transfering accounting data to remote
client.
usdAcctngManualTransfer - Administrator is responsible for manually
transfering collected accounting data off of the system.
usdAcctngAutomatedTransfer - The agent will automatically transfer the
collected accounting data based at a acctngFileIntervals using an entry
in the usdFileXferTable pointed to by usdAcctngFileXferIndex. If a
manager sets this object to this value, a corresponding row in the
usdFileXferTable must exist, otherwise the set command will fail.
usdActngTransferOnFileFull - The agent will automatically transfer the
collected accounting data when the file reaches the maximum size defined
by acctngFileMaximumSize. If a manager sets this object to this value,
a corresponding row in the usdFileXferTable must exist, otherwise the set
command will fail.
usdAcctngRedundantTransfer - The agent will automatically transfer two
copies of the accounting data based on the acctngFileInterval. One copy
will go to the usdFileXferTable entry identified by usdAcctngFileXferIndex
and one copy will go the the usdFileXferTable entry identified by
usdAcctngFileXferSecondaryIndexrw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1 |
usdAcctngFileXferIndexIdentifies an entry in the usdFileXferTable, which defines the file
transfer parameters to use when the agent is configured to automatically
transfer collected accounting data files. A set to this object will
fail if a corresponding entry in the usdFileXferTable does not exist or
it is not set to usdFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2 |
usdAcctngFileXferSecondaryIndexIdentifies a backup or secondary entry in the usdFileXferTable, which
defines the file transfer parameters to use when the agent is configured
to automatically transfer collected accounting data files. A set to
this object will fail if a corresponding entry in the usdFileXferTable
does not exist or it is not set to usdFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3 |
usdAcctngInterfaceControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.3 |
usdAcctngInterfaceTableA table controlling the collection of accounting data on specific
interfaces types. This table provides an efficient mechanism to enable
and/or disable data collection on all interfaces of a specified type. SEQUENCE OF UsdAcctngInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.1 |
usdAcctngInterfaceEntryAn entry which controls whether accounting data is to be collected on
interfaces of a specific type. UsdAcctngInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.1.1 |
usdAcctngInterfaceAdminStatusThe desired administrative state for accounting data collection for
interfaces defined by the type of this entry. The administrative scope
is for all interfaces of the type defined by the corresponding usdIfType
for this entry.rw UsdAcctngAdminType (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1 |
usdAcctngInterfaceOperStatusThe operational state for accounting data collection on for all
interfaces corresponding to this entries type.ro UsdAcctngOperType (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2 |
usdAcctngInterfaceRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3 |
usdAcctngInterfaceAccntgFileIndexThis object selects the acctngFileTable entry for the collection
statistics for this interface type. If there is not an entry in the
acctngFileTable with the index indicated by this object, the
usdAcctngInterface row will be ignored, unless the following conditions
are met: (1) usdAcctngInterfaceAccntgFileIndex is set to zero, which is
its default value, and (2) there is only one entry in the
acctngFileTable. When the two conditions are met, the interface type
will apply to the one existing acctngFileTable entry.rw Integer32 .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4 |
usdAcctngSelectionSchemaThe root OBJECT IDENTIFIER under which accounting selection tree
objects are assigned. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2 |
usdAcctngSelectionSchemaIf OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1 |
usdAcctngIfInOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.1 |
usdAcctngIfInUcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.2 |
usdAcctngIfInDiscards OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.3 |
usdAcctngIfInErrors OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.4 |
usdAcctngIfInUnknownProtos OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.5 |
usdAcctngIfOutOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.6 |
usdAcctngIfOutUcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.7 |
usdAcctngIfOutDiscards OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.8 |
usdAcctngIfOutErrors OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.9 |
usdAcctngIfCorrelator OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.10 |
usdAcctngIfInPolicedOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.11 |
usdAcctngIfInPolicedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.12 |
usdAcctngIfInSpoofedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.13 |
usdAcctngIfOutPolicedOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.14 |
usdAcctngIfOutPolicedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.15 |
usdAcctngIfOutSchedulerDropOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.16 |
usdAcctngIfOutSchedulerDropPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.17 |
usdAcctngIfLowerInterface OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.18 |
usdAcctngIfTimeOffset OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.19 |
usdAcctngifInMulticastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.20 |
usdAcctngifInBroadcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.21 |
usdAcctngifOutMulticastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.22 |
usdAcctngifOutBroadcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.23 |
usdAcctngSelectionSchemaIfStack OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.3 |
usdAcctngSelectionSchemaSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.4 |
usdAcctngSelectionSchemaPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5 |
usdAcctngGreenPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.1 |
usdAcctngUpperGreenPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.2 |
usdAcctngYellowPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.3 |
usdAcctngUpperYellowPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.4 |
usdAcctngRedPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.5 |
usdAcctngUpperRedPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.6 |
usdAcctngGreenBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.7 |
usdAcctngUpperGreenBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.8 |
usdAcctngYellowBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.9 |
usdAcctngUpperYellowBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.10 |
usdAcctngRedBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.11 |
usdAcctngUpperRedBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.12 |
usdAcctngConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3 |
usdAcctngGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3.1 |
usdAcctngCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3.2 |