Unisphere-Data-IF-MIB
The Unisphere-Data-IF-MIB provides standard SNMP interface monitoring capabilities for Unisphere Networks Inc. hardware, exposing key metrics such as interface status, octet counts, packet errors, and link state transitions via the Generic Interfaces MIB (IF-MIB) structure.
Imported Objects
Objects
16 total| Object Name |
|---|
usdIfMIBThe Generic Interfaces MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.3 |
usdInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1 |
usdIf OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1 |
usdIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.1 |
usdIfTableThis table contains a corresponding entry for each entry found in the standard Generic Interfaces MIB ifTable/ifXTable. The entries in this table contain supplementary generic interface characteristics. Entries in ifTable/ifXTable and in this table are created/deleted as a consequence of hardware detection, or of management configuration via standard or enterprise type-specific interface MIBs. SEQUENCE OF UsdIfEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.1 |
usdIfEntryAn entry representing an interface's enterprise-defined generic interface characteristics. UsdIfEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.1.1 |
usdIfTypeIdentifies the type of this interface.ro UsdIfType .1.3.6.1.4.1.4874.2.2.3.1.1.1.1.1.1 |
usdIfInvStackTableA table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'underneath' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs underneath the sub-layer with ifIndex value y, then this table contains: usdIfInvStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.x.0=active ifStackStatus.0.x=active This table contains exactly the same number of rows as the ifStackTable, but the rows appear in a different order. SEQUENCE OF UsdIfInvStackEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.2 |
usdIfInvStackEntryInformation on a particular relationship between two sub-layers, specifying that one sub-layer runs underneath the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable. UsdIfInvStackEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.2.1 |
usdIfInvStackStatusThe status of the relationship between two sub-layers. An instance of this object exists for each instance of the ifStackStatus object, and vice versa. For example, if the variable ifStackStatus.H.L exists, then the variable usdIfInvStackStatus.L.H must also exist, and vice versa. In addition, the two variables always have the same value. However, unlike ifStackStatus, the usdIfInvStackStatus object is NOT write-able. A network management application wishing to change a relationship between sub-layers H and L cannot do so by modifying the value of usdIfInvStackStatus.L.H, but must instead modify the value of ifStackStatus.H.L. After the ifStackTable is modified, the change will be reflected in this table.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.3.1.1.1.2.1.1 |
usdIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4 |
usdIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4.1 |
usdIfComplianceThe compliance statement for entities which implement the Unisphere Generic Interfaces MIB. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.1.1 |
usdIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4.2 |
usdIfGroupA collection of objects for managing generic interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.2.1 |
usdIfInvStackGroupA collection of objects providing inverted information on the layering of MIB-II interfaces. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.2.2 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module