Unisphere-Data-POLICY-MIB
AI MIB Summary
The Unisphere-Data-POLICY-MIB enables SNMP-based monitoring and configuration of access control lists, traffic shaping rules, and security policies on Unisphere Networks Inc. enterprise devices. It exposes specific metrics for policy rule states, hit counts, and bandwidth allocation parameters to facilitate real-time network traffic management and compliance auditing.
The Policy MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdPolicyMIB.1.3.6.1.4.1.4874.2.2.27
238
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
238 total| Object Name |
|---|
usdPolicyMIBThe Policy MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.27 |
usdPolicyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1 |
usdClassifierControlList OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.1 |
usdClassifierControlListNextIndexThis scalar object returns the index of the next available row in the usdClassifierControlListTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.1 |
usdClassifierControlListTableThis table contains entries for elements of classifier control lists. The details pertinent to each CLACL are found in the usdClassifierControlDefTable. SEQUENCE OF UsdClassifierControlListEntry .1.3.6.1.4.1.4874.2.2.27.1.1.2 |
usdClassifierControlListEntryEach entry describes the characteristics of an IP access list element. UsdClassifierControlListEntry .1.3.6.1.4.1.4874.2.2.27.1.1.2.1 |
usdClassifierControlListIdThe number of the classifier control list to which this entry belongs. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.2.1.1 |
usdClassifierControlListRowStatusControls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. To create an entry in this table, the following entry objects MUST be explicitly configured: usdClassifierControlListRowStatus usdClassifierControlListElemIdrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.1.2.1.3 |
usdClassifierControlListNameThe name of the CLACL being defined.rw DisplayString .1.3.6.1.4.1.4874.2.2.27.1.1.2.1.4 |
usdClassifierControlListReferenceCountNumber of times this CLACL is referenced by policies.ro Counter32 .1.3.6.1.4.1.4874.2.2.27.1.1.2.1.5 |
usdClassifierControlListNextElementIndexEach get of this object will return a unique index which may be used to create classifier control list elements. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.2.1.6 |
usdClassifierControlListElementTableThis table contains entries for elements of classifier control lists. Entries belonging to the same control list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. SEQUENCE OF UsdClassifierControlListElementEntry .1.3.6.1.4.1.4874.2.2.27.1.1.4 |
usdClassifierControlListElementEntryEach entry describes the characteristics of an IP access list element. UsdClassifierControlListElementEntry .1.3.6.1.4.1.4874.2.2.27.1.1.4.1 |
usdClassifierControlListElemIdThe relative position of this entry within its classifier control list. Classifier control list entries are searched in this sequence (low to high values) until a match is found. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.1 |
usdClassifierControlListElemRowStatusControls creation/deletion of conceptual rows within this table. This table provides a partial implementation for rowStatus. Rows may be created using createAndGo and createAndWait. Once a row has been made active the row status may not be changed.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.2 |
usdClassifierControlListNotSrcInvert the meaning of the source IP address and mask objects. For example 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.3 |
usdClassifierControlListSrcA source IP address. A subject IP address is first masked with the value of usdClassifierControlListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.4 |
usdClassifierControlListSrcMaskThe IP address mask to be applied to a subject source IP address before comparing it to usdClassifierControlListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.5 |
usdClassifierControlListNotDstInvert the meaning of the destination IP address and mask objects. For example, 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.6 |
usdClassifierControlListDstA destination IP address. A subject IP address is first masked with the value of usdClassifierControlListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.7 |
usdClassifierControlListDstMaskThe IP address mask to be applied to a subject destination IP address before comparing it to usdClassifierControlListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.8 |
usdClassifierControlListNotProtocolInvert the meaning of the protocol object. For example, 'not TCP' matches any protocol except for TCP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.9 |
usdClassifierControlListProtocolAn IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.10 |
usdClassifierControlListTosByteThe IP TOS byte value to match.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.11 |
usdClassifierControlListMaskThe mask to use for TOS byte checks. Allowed values are 0, 224, 252, 255.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.12 |
usdClassifierControlListSrcOperatorOperator for use in comparing source ports.rw UsdClaclPortOperator .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.13 |
usdClassifierControlListSrcFromPortSource UDP or TCP 'from' port number.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.14 |
usdClassifierControlListSrcToPortSource UDP or TCP 'to' port number.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.15 |
usdClassifierControlListDestOperatorOperator for use in comparing Destination ports.rw UsdClaclPortOperator .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.16 |
usdClassifierControlListDestFromPortDestination UDP or TCP 'from' port number.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.17 |
usdClassifierControlListDestToPortDestination UDP or TCP 'to' port number.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.18 |
usdClassifierControlListICMPTypeOptional ICMP message type for classification.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.19 |
usdClassifierControlListICMPCodeOptional ICMP message code for classification.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.20 |
usdClassifierControlListIGMPTypeOptional IGMP message type for classification.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.21 |
usdClassifierControlListTcpFlagsValueOptional TCP flags value for classification.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.22 |
usdClassifierControlListTcpFlagsMaskOptional TCP flags mask for classification. TCP flag bits not specified in the mask are don't care bits.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.23 |
usdClassifierControlListIpFlagsValueOptional IP flags value for classification.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.24 |
usdClassifierControlListIpFlagsMaskOptional IP flags mask for classification. IP flag bits not specified in the mask are don't care bitsrw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.25 |
usdClassifierControlListIpFragValueOptional IP flags mask for classification. IP flag bits not specified in the mask are don't care bitsrw UsdPolicyIpFragValue .1.3.6.1.4.1.4874.2.2.27.1.1.4.1.26 |
usdRateLimitControlList OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.2 |
usdRateLimitProfileNextIndexThis scalar object returns the index of the next available row in the usdRateLimitProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.2.1 |
usdRateLimitProfileTableThis table contains entries for elements of Rate Limit Profile (RLP) definitions. SEQUENCE OF UsdRateLimitProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.2.2 |
usdRateLimitProfileEntryEach entry describes the characteristics of a rate limit profile element. UsdRateLimitProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.2.2.1 |
usdRateLimitProfileIdThe ID number of the rate limit profile (RLP) entry which is defined by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.1 |
usdRateLimitProfileRowStatusControls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdRateLimitProfileNamerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2 |
usdRateLimitProfileNameSpecifies the name of the rate limit profile defined by this row.rw DisplayString .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.3 |
usdRateLimitReferenceCountThis object reflects the number of times a rate limit profile object is referenced by policies.ro Counter32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.4 |
usdRateLimitCommittedBpsThe committed access rate in bits per second.rw Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.5 |
usdRateLimitCommittedBurstThe committed access rate burst value in bytes.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.6 |
usdRateLimitExceedBpsThe peak access rate in bits per second. To be configured only if rate limit profile type is two-rate.rw Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.7 |
usdRateLimitExceedBurstThe peak access rate burst value in bytes. To be configured only if rate limit profile type is two-rate.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.8 |
usdRateLimitCommittedActionAction to be taken when the access rate is within the bounds of the committed access rate.rw Enumeration .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.9 |
usdRateLimitConformedActionAction to be taken when the access rate exceeds the bounds of the committed access rate.rw Enumeration .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.10 |
usdRateLimitExceededActionAction to be taken when the access rate exceeds the bounds of the peak access rate.rw Enumeration .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.11 |
usdRateLimitCommittedMarkValNew IP precedence to be used when the usdRateLimitCommittedAction mark action is applied.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.12 |
usdRateLimitConformedMarkValNew IP prececence to be used when the usdRateLimitExceedCommittedAction mark action is applied.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.13 |
usdRateLimitExceededMarkValNew IP precedence to be used when the usdRateLimitExceedPeakAction mark action is applied.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.14 |
usdRateLimitMaskMask to be applied when executing a mark action.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.15 |
usdRateLimitProfileTypeThe rate limit profile type (i.e. one-rate or two-rate). Defaults to two-rate, if not specified.rw UsdRateLimitProfileType .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16 |
usdRateLimitExcessBurstThe excess committed access rate burst value in bytes. To be configured only if rate limit profile type is one-rate.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.17 |
usdPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.3 |
usdPolicyNextIndexThis scalar object returns the index of the next available row in the usdPolicyTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.1 |
usdPolicyTableThis table contains entries which represent the non-repetive fields of a policy definition. SEQUENCE OF UsdPolicyEntry .1.3.6.1.4.1.4874.2.2.27.1.3.2 |
usdPolicyEntryEach entry contains the non-repetitive fields of a policy definition. UsdPolicyEntry .1.3.6.1.4.1.4874.2.2.27.1.3.2.1 |
usdPolicyIdThe number of the policy table entry which is defined by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.1 |
usdPolicyRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.2 |
usdPolicyAdminStateThis object is used to control the administrative state of a policy. Enabling a policy will result in the rules which make up a policy being applied to interfaces to which the policy is assigned. Disabling a policy results in the the policy being taken out of service. This object may be modified while the row is active.rw Enumeration .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.3 |
usdPolicyOperStatusThis object is used to retrieve the operational state of a policy. If a policy is disabled, it is not applied to any interfaces within the system. If a policy is invalid, there is a problem with the policy preventing it from being applied to an interface. An error code providing diagnostic information about the problem is found in usdPolicyErrorValue. If a policy is enabled, it has been applied to one or more interfaces within the system.ro Enumeration .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4 |
usdPolicyErrorValueAn error code providing diagnostic information for invalid policies. The enumeration of this field is TBD. A zero (0) value indicates that there is no error reported.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.5 |
usdPolicyNameSpecifies the name of the policy defined by this row.rw DisplayString .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.6 |
usdPolicyReferenceCountReflects the number of times this policy has been applied within the chassis.ro Counter32 .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.7 |
usdPolicyRuleNextIndexRead only variable which provides the next available PolicyRuleIndex with respect to the policy defined by this row. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.ro Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.2.1.8 |
usdPolicyRuleTableEach entry within this table defines a rule component of a policy. The entries in this table are created automatically when entries are created in specific rule tables. This table is read only SEQUENCE OF UsdPolicyRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.3 |
usdPolicyRuleEntryEach entry defines a single rule component. UsdPolicyRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.3.1 |
usdPolicyRulePolicyIdThe PolicyTable index of the policy which owns this rule. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.1 |
usdPolicyRulePrecThe precedence of this rule within this group of policy rules. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.2 |
usdPolicyRuleIdThe index of this rule within the set of rules owned by the policy defined by usdPolicyRulePolicyId. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.3 |
usdPolicyRuleTypeThis field specifies the type of rule being defined. The remaining information which makes up this rule is found in the specific rule table defined by usdPolicyRuleType. The specific rule tables are indexed by usdPolicyRulePolicyId.usdPolicyRuleId.ro Enumeration .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.4 |
usdPolicySuspendSetting this object to true results in the rule being suspended (taken out of service). Setting this value to false results in the rule being returned to service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.5 |
usdPolicyEclipsedThis value is true if the policy rule is eclipsed. A policy rule is eclipsed if a conflicting rule with the same classifier control list precedes the rule, and the preceding rule is not suspended. A false value indicates that the rule is not eclipsed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.3.1.6 |
usdNextHopRuleTableA list of entries which provide next-hop rule data. Rows created in this table result in an entry being created in the policy rule table. SEQUENCE OF UsdNextHopRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.4 |
usdNextHopRuleEntryA next-hop rule entry. UsdNextHopRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.4.1 |
usdNextHopRowStatusControls creation/deletion of conceptual rows within this table. The next-hop IP address is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.4.1.1 |
usdNextHopIpAddressThe IP address to forward all packets to.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.3.4.1.2 |
usdNextHopClaclIdThe classifier control list ID which completes the NextHop policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.4.1.3 |
usdFilterRuleTableA list of entries which provide filter rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdFilterRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.5 |
usdFilterRuleEntryA filter rule entry. UsdFilterRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.5.1 |
usdFilterRowStatusControls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.5.1.1 |
usdFilterClaclIdThe classifier control list ID which completes the filter policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.5.1.2 |
usdNextInterfaceRuleTableA list of entries which provide NextInterface rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdNextInterfaceRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.6 |
usdNextInterfaceRuleEntryA NextInterface rule entry. UsdNextInterfaceRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.6.1 |
usdNextInterfaceRowStatusControls creation/deletion of conceptual rows within this table. The next-interface parameter is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.6.1.1 |
usdNextInterfaceIdThe interface index to which traffic matching the CLACL ID will be routed.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.27.1.3.6.1.2 |
usdNextInterfaceClaclIdThe classifier control list ID which completes the NextInterface policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.6.1.3 |
usdNextInterfaceNextHopThe IP address to forward all packets to.rw IpAddress .1.3.6.1.4.1.4874.2.2.27.1.3.6.1.4 |
usdRateLimitRuleTableA list of entries which provide RateLimit rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdRateLimitRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.7 |
usdRateLimitRuleEntryA RateLimit rule entry. UsdRateLimitRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.7.1 |
usdRateLimitRowStatusControls creation/deletion of conceptual rows within this table. The rate limit profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.7.1.1 |
usdRateLimitIdThe RLP ID which provides the rate limit data which completes the RateLimit policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.7.1.2 |
usdRateLimitClaclIdThe classifier control list ID which fills out the RateLimit policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.7.1.3 |
usdMarkingRuleTableA list of entries which provide Marking rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdMarkingRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.8 |
usdMarkingRuleEntryA Marking rule entry. UsdMarkingRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.8.1 |
usdMarkingRowStatusControls creation/deletion of conceptual rows within this table. The IP precedence field is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.8.1.1 |
usdMarkingTOSByteThe IP precedence value associated with this policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.8.1.2 |
usdMarkingMaskThe mask to use for TOS byte checks.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.8.1.3 |
usdMarkingClaclIdThe classifier control list ID which fills out the Marking policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.8.1.4 |
usdForwardRuleTableA list of entries which provide forward rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdForwardRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.9 |
usdForwardRuleEntryA forward rule entry. UsdForwardRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.9.1 |
usdForwardRowStatusControls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.9.1.1 |
usdForwardClaclIdThe classifier control list ID which completes the forward policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.9.1.2 |
usdTrafficShapeRuleTableObsolete list of entries which provide Traffic Shape rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This list became obsolete when the policy shaper capability was moved into the quality of service component.obsolete SEQUENCE OF UsdTrafficShapeRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.10 |
usdTrafficShapeRuleEntryA TrafficShape rule entry.obsolete UsdTrafficShapeRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.10.1 |
usdTrafficShapeRowStatusControls creation/deletion of conceptual rows within this table. The traffic shape profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.10.1.1 |
usdTrafficShapeIdThe RLP ID which provides the rate limit data which completes the traffic shape policy rule.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.10.1.2 |
usdColorRuleTableA list of entries which provide Color rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdColorRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.11 |
usdColorRuleEntryA Color rule entry. UsdColorRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.11.1 |
usdColorRowStatusControls creation/deletion of conceptual rows within this table. The color field is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.11.1.1 |
usdColorThe color with which to explicitly color packets associated with this policy rule.rw Enumeration .1.3.6.1.4.1.4874.2.2.27.1.3.11.1.2 |
usdColorClaclIdThe classifier control list ID which fills out the Color policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.11.1.3 |
usdLogRuleTableA list of entries which provide log rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdLogRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.12 |
usdLogRuleEntryA log rule entry. UsdLogRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.12.1 |
usdLogRowStatusControls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.12.1.1 |
usdLogClaclIdThe classifier control list ID which completes the log policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.12.1.2 |
usdTrafficClassRuleTableA list of entries which provide traffic Class rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. SEQUENCE OF UsdTrafficClassRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.13 |
usdTrafficClassRuleEntryA Traffic Class rule entry. UsdTrafficClassRuleEntry .1.3.6.1.4.1.4874.2.2.27.1.3.13.1 |
usdTrafficClassRowStatusControls creation/deletion of conceptual rows within this table. The usdTrafficClassId field is mandatory and must be specified. Modes supported are create-and-go and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.3.13.1.1 |
usdTrafficClassIdThe traffic class ID.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.13.1.2 |
usdTrafficClassClaclIdThe classifier control list ID which fills out the traffic class policy rule.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.3.13.1.3 |
usdPolicyIf OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.4 |
usdPolicyIfTableThis obsolete table contains entries which represent attachment of policies to interfaces. This table became obsolete when the usdPolicyIfAttTable was added.obsolete SEQUENCE OF UsdPolicyIfEntry .1.3.6.1.4.1.4874.2.2.27.1.4.1 |
usdPolicyIfEntryEach entry contains the attachment of policy(s) to an interface.obsolete UsdPolicyIfEntry .1.3.6.1.4.1.4874.2.2.27.1.4.1.1 |
usdPolicyIfInterfaceIdThe interface number representing the interface to which policy(s) have been attached.obsolete Unsigned32 .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.1 |
usdPolicyIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.2 |
usdPolicyIfInputPolicyIdThis object is used to control the attachment of input policies to the interface specified by usdPolicyIfInterfaceId, usdPolicyIfForwardingType and usdPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.3 |
usdPolicyIfOutputPolicyIdThis object is used to control the attachment of output policies to the interface specified by usdPolicyIfInterfaceId, usdPolicyIfForwardingType and usdPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.4 |
usdPolicyIfInputStatsEnableThis object is used to control the enabling and disabling of statistics for an input policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of usdPolicyInputStatsEnable.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.5 |
usdPolicyIfOutputStatsEnableThis object is used to control the enabling and disabling of statistics for an output policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of usdPolicyOutputStatsEnable.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.4.1.1.6 |
usdPolicyIfAttachTableThis table contains entries which represent attachment of policies to interfaces. SEQUENCE OF UsdPolicyIfAttachEntry .1.3.6.1.4.1.4874.2.2.27.1.4.2 |
usdPolicyIfAttachEntryEach entry contains the attachment of policy(s) to an interface. UsdPolicyIfAttachEntry .1.3.6.1.4.1.4874.2.2.27.1.4.2.1 |
usdPolicyIfAttachInterfaceIdThe interface number representing the interface to which policy(s) have been attached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.1 |
usdPolicyIfAttachForwardingTypeThe interface type (i.e. IP or CBF) which the policy have been attached to. UsdPolicyForwardingType .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.2 |
usdPolicyIfAttachPolicyTypeThe policy type (i.e. input, output or local input). UsdPolicyAttachmentType .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.3 |
usdPolicyIfAttachRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.4 |
usdPolicyIfAttachPolicyIdThis object is used to control the attachment of policies to the interface specified by usdPolicyIfAttachInterfaceId, usdPolicyIfAttachForwardingType and usdPolicyIfAttachPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.5 |
usdPolicyIfAttachStatsEnableThis object is used to control the enabling and disabling of statistics for a policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of usdPolicyStatsEnable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.4.2.1.6 |
usdPolicyProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.5 |
usdPolicyProfileTableThis obsolete table contains entries which represent attachment of policies to dynamic interfaces through profiles. This table became obsolete when the usdPolicyAttachProfileTable was added.obsolete SEQUENCE OF UsdPolicyProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.5.1 |
usdPolicyProfileEntryEach entry contains the profile for attachment of policy(s) to a dynamic interface.obsolete UsdPolicyProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.5.1.1 |
usdPolicyProfileIdThe profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface.obsolete Unsigned32 .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.1 |
usdPolicyProfileRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.2 |
usdPolicyProfileInputPolicyIdThis object is used to control the attachment of input policies to dynamic interfaces configured by the profile identified by usdPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.3 |
usdPolicyProfileOutputPolicyIdThis object is used to control the attachment of output policies to dynamic interfaces configured by the profile identified by usdPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied to an interface.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.4 |
usdPolicyProfileInputStatsEnableThis object is used to control the enabling and disabling of statistics for an input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.5 |
usdPolicyProfileOutputStatsEnableThis object is used to control the enabling and disabling of statistics for an output policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.6 |
usdPolicyProfileLocalInputPolicyIdThis object is used to control the attachment of local input policies to dynamic interfaces configured by the profile identified by usdPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.7 |
usdPolicyProfileLocalInputStatsEnableThis object is used to control the enabling and disabling of statistics for a local input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.1.1.8 |
usdPolicyAttachProfileTableThis table contains entries which represent attachment of policies to dynamic interfaces through profiles. SEQUENCE OF UsdPolicyAttachProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.5.2 |
usdPolicyAttachProfileEntryEach entry contains the profile for attachment of policy(s) to a dynamic interface. UsdPolicyAttachProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.5.2.1 |
usdPolicyAttachProfileIdThe profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface. Unsigned32 .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.1 |
usdPolicyAttachProfileForwardingTypeThe interface type (i.e. IP or CBF) which the policy would be attached to. UsdPolicyForwardingType .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.2 |
usdPolicyAttachProfilePolicyTypeThe policy type (i.e. input, output or local input). UsdPolicyAttachmentType .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.3 |
usdPolicyAttachProfileRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.4 |
usdPolicyAttachProfilePolicyIdThis object is used to control the attachment of policies to dynamic interfaces configured by the profile identified by usdPolicyAttachProfileId, usdPolicyAttachProfileForwardingType and usdPolicyAttachProfilePolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.rw Integer32 .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.5 |
usdPolicyAttachProfileStatsEnableThis object is used to control the enabling and disabling of statistics for an policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.5.2.1.6 |
usdPolicyStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.6 |
usdPolicyIfStatsTableEach entry within this obsolete table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table.obsolete SEQUENCE OF UsdPolicyIfStatsEntry .1.3.6.1.4.1.4874.2.2.27.1.6.1 |
usdPolicyIfStatsEntryEach entry defines a single statistics entry.obsolete UsdPolicyIfStatsEntry .1.3.6.1.4.1.4874.2.2.27.1.6.1.1 |
usdPolicyIfStatsIfIdThe interface ID corresponding to the stats block represented by this row.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.1 |
usdPolicyIfStatsPolicyTypeThe attachment point for the policy.obsolete UsdPolicyAttachmentType .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.2 |
usdPolicyIfStatsPolicyIdThe PolicyTable index of the policy corresponding to the stats block represented by this row.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.3 |
usdPolicyIfStatsRulePrecThe precedence of the policy rule corresponding to the stats block represented by this row.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.4 |
usdPolicyIfStatsRuleIdThe index of the policy rule corresponding to the stats block represented by this row.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.5 |
usdPolicyIfStatsClaclEntryNumberThe index of the clacl entry number corresponding to the stats block represented by this row.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.6 |
usdPolicyIfStatsGreenPacketsThe number of green packets policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.7 |
usdPolicyIfStatsYellowPacketsThe number of yellow packets policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.8 |
usdPolicyIfStatsRedPacketsThe number of red packets policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.9 |
usdPolicyIfStatsGreenBytesThe number of green bytes policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.10 |
usdPolicyIfStatsYellowBytesThe number of yellow bytes policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.11 |
usdPolicyIfStatsRedBytesThe number of red bytes policed by the policy rule.roobsolete Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.1.1.12 |
usdPolicyIfAttachStatsTableEach entry within this table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table. SEQUENCE OF UsdPolicyIfAttachStatsEntry .1.3.6.1.4.1.4874.2.2.27.1.6.2 |
usdPolicyIfAttachStatsEntryEach entry defines a single statistics entry. UsdPolicyIfAttachStatsEntry .1.3.6.1.4.1.4874.2.2.27.1.6.2.1 |
usdPolicyIfAttachStatsIfIdThe interface ID corresponding to the stats block represented by this row. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.1 |
usdPolicyIfAttachStatsForwardingTypeThe forwarding type for the policy attachment. UsdPolicyForwardingType .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.2 |
usdPolicyIfAttachStatsPolicyTypeThe attachment point for the policy. UsdPolicyAttachmentType .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.3 |
usdPolicyIfAttachStatsPolicyIdThe PolicyTable index of the policy corresponding to the stats block represented by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.4 |
usdPolicyIfAttachStatsRulePrecThe precedence of the policy rule corresponding to the stats block represented by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.5 |
usdPolicyIfAttachStatsRuleIdThe index of the policy rule corresponding to the stats block represented by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.6 |
usdPolicyIfAttachStatsClaclEntryNumberThe index of the clacl entry number corresponding to the stats block represented by this row. Integer32 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.7 |
usdPolicyIfAttachStatsGreenPacketsThe number of green packets policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.8 |
usdPolicyIfAttachStatsYellowPacketsThe number of yellow packets policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.9 |
usdPolicyIfAttachStatsRedPacketsThe number of red packets policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.10 |
usdPolicyIfAttachStatsGreenBytesThe number of green bytes policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.11 |
usdPolicyIfAttachStatsYellowBytesThe number of yellow bytes policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.12 |
usdPolicyIfAttachStatsRedBytesThe number of red bytes policed by the policy rule.ro Counter64 .1.3.6.1.4.1.4874.2.2.27.1.6.2.1.13 |
usdTrafficShapeControlList OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.1.7 |
usdTrafficShapeProfileNextIndexObsolete scalar object returns the index of the next available row in the usdTrafficShapeProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended. This object became obsolete when the policy shaper capability was moved into the quality of service component.roobsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.7.1 |
usdTrafficShapeProfileTableThis table contains entries for elements of Traffic Shape Profile definitions. This table became obsolete when the policy shaper capability was moved into the quality of service component.obsolete SEQUENCE OF UsdTrafficShapeProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.7.2 |
usdTrafficShapeProfileEntryEach entry describes the characteristics of a traffic shape profile element.obsolete UsdTrafficShapeProfileEntry .1.3.6.1.4.1.4874.2.2.27.1.7.2.1 |
usdTrafficShapeProfileIdThe number of the traffic shape profile entry which is defined by this row.obsolete Integer32 .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.1 |
usdTrafficShapeProfileRowStatusControls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdTrafficShapeProfileRowStatusrwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.2 |
usdTrafficShapeProfileNameSpecifies the name of the traffic shape profile defined by this row.rwobsolete DisplayString .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.3 |
usdTrafficShapeReferenceCountThis object reflects the number of times a traffic shape profile object is referenced by policies.roobsolete Counter32 .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.4 |
usdTrafficShapeRateThe traffic shape rate in bits per second.rwobsolete Integer32 UNITS "bits per second" .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.5 |
usdTrafficShapeBurstThe traffic shape burst in bytes.rwobsolete Integer32 UNITS "bytes" .1.3.6.1.4.1.4874.2.2.27.1.7.2.1.6 |
usdPolicyConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.2 |
usdPolicyCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.2.1 |
usdPolicyComplianceObsolete compliance statement for entities which implement the Unisphere policy management MIB. This statement became obsolete when policy traffic shape and color objects were added to the MIB.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.1 |
usdPolicyCompliance2Obsolete compliance statement for entities which implement the Unisphere policy management MIB. This statement was obsolete when policy log rule objects were added to the MIB.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.2 |
usdPolicyCompliance3Obsolete compliance statement for entities which implement the Unisphere policy management MIB. This statement became obsolete when policy color rule objects were added, the policy profile table was extended and the policy interface attachement tables were replaced by new versions.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.3 |
usdPolicyCompliance4Obsolete compliance statement for entities which implement the Unisphere policy management MIB. This statement became obsolete when TCP flag and IP flag classifier control list objects were added and the usdPolicyProfileTable was repalced by the usdPolicyAttachProfileTable.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.4 |
usdPolicyCompliance5Obsolete compliance statement for entities which implement the Unisphere policy management MIB. This statement became obsolete when traffic class rule objects and new rate limit objects were added and when the policy shaper capability was moved into the quality of service component.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.5 |
usdPolicyCompliance6The compliance statement for entities which implement the Unisphere policy management MIB. Unknown .1.3.6.1.4.1.4874.2.2.27.2.1.6 |
usdPolicyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.27.2.2 |
usdPolicyGroupObsolete collection of objects for managing policies in a Unisphere product. This group became obsolete when policy traffic shape and color objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.1 |
usdRateLimitControlListGroupObsolete collection of objects for managing rate limit control lists in a Unisphere product. This group became obsolete when it was replaced by the usdRateLimitGroup so that rate limit support could become optional.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.2 |
usdClassifierControlListGroupObsolete collection of objects for managing elements of classifier control lists in a Unisphere product. This group became obsolete when support was added for TCP flag and IP flag control objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.3 |
usdPolicyIfGroupObsolete collection of objects for managing attachment of policies to interfaces in a Unisphere product. This group became obsolete when the usdPolicyIfTable was replaced by the usdPolicyIfAttachTable.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.4 |
usdPolicyProfileGroupObsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles in a Unisphere product. This group became obsolete when the usdPolicyProfileLocalInputPolicyId and the usdPolicyProfileLocalInputStatsEnable objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.5 |
usdPolicyStatisticsGroupObsolete collection of objects for managing statistics data for an interface/policy rule combination in a Unisphere product. This group became obsolete when the usdPolicyIfStatsTable was replaced by the usdPolicyIfAttachStatsTable.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.6 |
usdPolicyGroup2Obsolete collection of objects for managing policies in a Unisphere product. This group became obsolete when the specific rules objects were broken out into separte groups.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.7 |
usdTrafficShapeProfileGroupObsolete collection of objects for traffic shaping data for a policy rule in a Unisphere product. This group became obsolete when it was combined with the traffic shape policy rules objects.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.8 |
usdLogRuleGroupA collection of objects for log data for a policy rule in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.9 |
usdPolicyIfAttachGroupA collection of objects for managing attachment of policies to interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.10 |
usdPolicyProfileGroup2Obsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles. This group became obsolete when the usdPolicyProfileTable was replaced by the usdPolicyAttachProfileTable.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.11 |
usdPolicyAttachStatisticsGroupA collection of objects for managing statistics data for an interface/policy rule combination in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.12 |
usdClassifierControlListGroup2A collection of objects for managing elements of classifier control lists in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.13 |
usdPolicyAttachProfileGroupA collection of objects for managing attachment of policies to dynamic interfaces through profiles. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.14 |
usdPolicyBaseGroupA collection of basic objects for managing policies in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.15 |
usdNextHopRulesGroupA collection of objects for managing next-hop policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.16 |
usdFilterRulesGroupA collection of objects for managing filter policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.17 |
usdNextInterfaceRulesGroupA collection of objects for managing next-interface policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.18 |
usdRateLimitGroupObsolete collection of objects for managing rate limit policy rules and profile lists in a Unisphere product. This group became obsolete when new rate limit profile objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.19 |
usdMarkingRulesGroupA collection of objects for managing policy rules for marking in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.20 |
usdForwardRulesGroupA collection of objects for managing forward policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.21 |
usdTrafficShapeGroupObsolete collection of objects for managing traffic shape policy rules and profile lists in a Unisphere product. This group became obsolete when the policy shaper capability was moved into the quality of service component.obsolete Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.22 |
usdColorRulesGroupA collection of objects for managing color policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.23 |
usdTrafficClassRulesGroupA collection of objects for managing traffic class policy rules in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.24 |
usdRateLimitGroup2A collection of objects for managing rate limit policy rules and profile lists in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.27.2.2.25 |