UNCDZ-MIB
This is the MIB module for the UNIFLAIR UNCDZ device.
Main OID:
uncdz_MIB.1.3.6.1.4.1.9839.2.1
128
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
128 total| Object Name |
|---|
carel OBJECT IDENTIFIER .1.3.6.1.4.1.9839 |
systm OBJECT IDENTIFIER .1.3.6.1.4.1.9839.1 |
agentReleaseRelease of the Agent.ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.1.1 |
agentCodeCode of the Agent. 2=pCOWeb.ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.1.2 |
instruments OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2 |
pCOWebInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.0 |
pCOStatusgroup OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.0.10 |
pCOId1_StatusStatus of pCOId1. 0=Offline, 1=Init, 2=Onlinero Integer32 .1.3.6.1.4.1.9839.2.0.10.1 |
pCOErrorsNumbergroup OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.0.11 |
pCOId1_ErrorsNumberNumber of Communication Errors from pCOId1 to pCOWeb.ro Integer32 .1.3.6.1.4.1.9839.2.0.11.1 |
uncdz_MIBThis is the MIB module for the UNIFLAIR UNCDZ device. MODULE-IDENTITY .1.3.6.1.4.1.9839.2.1 |
digitalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.1.1 |
vent_onSystem On (Fan)ro Integer32 .1.3.6.1.4.1.9839.2.1.1.1 |
compressore1Compressor 1ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.2 |
compressore2Compressor 2ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.3 |
compressore3Compressor 3ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.4 |
compressore4Compressor 4ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.5 |
out_h1Heating 1ro Integer32 .1.3.6.1.4.1.9839.2.1.1.6 |
out_h2Heating 2ro Integer32 .1.3.6.1.4.1.9839.2.1.1.7 |
out_h3Heating 3ro Integer32 .1.3.6.1.4.1.9839.2.1.1.8 |
gas_caldo_onHot Gas Coilro Integer32 .1.3.6.1.4.1.9839.2.1.1.9 |
on_deumDehumidificationro Integer32 .1.3.6.1.4.1.9839.2.1.1.10 |
powerHumidificationro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.11 |
mal_accessTampering Alarmro Integer32 .1.3.6.1.4.1.9839.2.1.1.12 |
mal_ataAlarm: Room High Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.1.13 |
mal_btaAlarm: Room Low Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.1.14 |
mal_auaAlarm: Room High Humidityro Integer32 .1.3.6.1.4.1.9839.2.1.1.15 |
mal_buaAlarm: Room Low Humidityro Integer32 .1.3.6.1.4.1.9839.2.1.1.16 |
mal_eapAlarm: Room High/Low Temp./Humid.(Ext. Devices)ro Integer32 .1.3.6.1.4.1.9839.2.1.1.17 |
mal_filterAlarm: Clogged Filterro Integer32 .1.3.6.1.4.1.9839.2.1.1.18 |
mal_floodAlarm: Water Leakage Detectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.19 |
mal_fluxAlarm: Loss of Air Flowro Integer32 .1.3.6.1.4.1.9839.2.1.1.20 |
mal_heaterAlarm: Heater Overheatingro Integer32 .1.3.6.1.4.1.9839.2.1.1.21 |
mal_hp1Alarm: High Pressure 1ro Integer32 .1.3.6.1.4.1.9839.2.1.1.22 |
mal_hp2Alarm: High Pressure 2ro Integer32 .1.3.6.1.4.1.9839.2.1.1.23 |
mal_lp1Alarm: Low Pressure 1ro Integer32 .1.3.6.1.4.1.9839.2.1.1.24 |
mal_lp2Alarm: Low Pressure 2ro Integer32 .1.3.6.1.4.1.9839.2.1.1.25 |
mal_phaseAlarm: Wrong phase sequencero Integer32 .1.3.6.1.4.1.9839.2.1.1.26 |
mal_smokeAlarm: SMOKE-FIRE DETECTEDro Integer32 .1.3.6.1.4.1.9839.2.1.1.27 |
mal_lanAlarm: Interrupted LANro Integer32 .1.3.6.1.4.1.9839.2.1.1.28 |
mal_hcurrHumidifier Alarm: High Currentro Integer32 .1.3.6.1.4.1.9839.2.1.1.29 |
mal_nopowerHumidifier Alarm: Power Lossro Integer32 .1.3.6.1.4.1.9839.2.1.1.30 |
mal_nowaterHumidifier Alarm: Water Lossro Integer32 .1.3.6.1.4.1.9839.2.1.1.31 |
mal_cw_dhAlarm: Chilled Water Temp. too High for Dehumidificationro Integer32 .1.3.6.1.4.1.9839.2.1.1.32 |
mal_tc_cwAlarm: CW Valve Failure or Water Flow too Lowro Integer32 .1.3.6.1.4.1.9839.2.1.1.33 |
mal_wflowAlarm: Loss of Water flowro Integer32 .1.3.6.1.4.1.9839.2.1.1.34 |
mal_whtAlarm: High chilled water temp.ro Integer32 .1.3.6.1.4.1.9839.2.1.1.35 |
mal_sonda_taAlarm: Room air Sensor Failure/Disconnectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.36 |
mal_sonda_tacAlarm: Hot water Sensor Failure/Disconnectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.37 |
mal_sonda_tcAlarm: Condensing water Sensor Failure/Disconnect.ro Integer32 .1.3.6.1.4.1.9839.2.1.1.38 |
mal_sonda_teAlarm: Outdoor temp. Sensor Failure/Disconnectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.39 |
mal_sonda_tmAlarm: Delivery temp. Sensor Failure/Disconnectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.40 |
mal_sonda_uaAlarm: Rel. Humidity Sensor Failure/Disconnectedro Integer32 .1.3.6.1.4.1.9839.2.1.1.41 |
mal_ore_compr1Service Alarm: Compressor 1 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.42 |
mal_ore_compr2Service Alarm: Compressor 2 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.43 |
mal_ore_compr3Service Alarm: Compressor 3 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.44 |
mal_ore_compr4Service Alarm: Compressor 4 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.45 |
mal_ore_filtroService Alarm: Air Filter hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.46 |
mal_ore_risc1Service Alarm: Heater 1 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.47 |
mal_ore_risc2Service Alarm: Heater 2 hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.48 |
mal_ore_umidService Alarm: Humidifier hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.49 |
mal_ore_unitService Alarm: Unit hour counter thresholdro Integer32 .1.3.6.1.4.1.9839.2.1.1.50 |
glb_alGeneral Alarmro Integer32 .1.3.6.1.4.1.9839.2.1.1.51 |
or_al_2lev2nd Level Alarmro Integer32 .1.3.6.1.4.1.9839.2.1.1.52 |
range_t_extOutdoor Temp. Sensor Fittedro Integer32 .1.3.6.1.4.1.9839.2.1.1.53 |
range_t_circClosed Circuit (or Chilled) Water Temperature Sensor Fittedro Integer32 .1.3.6.1.4.1.9839.2.1.1.54 |
range_t_manDelivery Temp. Sensor Fittedro Integer32 .1.3.6.1.4.1.9839.2.1.1.55 |
range_t_acHot water temp. Sensor Fittedro Integer32 .1.3.6.1.4.1.9839.2.1.1.56 |
umid_alHumidifier general alarmro Integer32 .1.3.6.1.4.1.9839.2.1.1.57 |
range_u_ambRelative Humidity Sensor Fittedro Integer32 .1.3.6.1.4.1.9839.2.1.1.58 |
k_sysonUnit Remote Switch-On/Off Controlrw Integer32 .1.3.6.1.4.1.9839.2.1.1.60 |
xs_res_alBuzzer and Alarm Remote Reset Controlrw Integer32 .1.3.6.1.4.1.9839.2.1.1.61 |
sleep_modeSet Back Mode (Sleep Mode)rw Integer32 .1.3.6.1.4.1.9839.2.1.1.63 |
test_smSet Back mode: Cyclical Start of Fanrw Integer32 .1.3.6.1.4.1.9839.2.1.1.64 |
ab_mediathUsage of T+ H Values: Local (0) / Mean (1)rw Integer32 .1.3.6.1.4.1.9839.2.1.1.65 |
ustdby1_2No. Of Stand-by Units: one (0) / two (1)rw Integer32 .1.3.6.1.4.1.9839.2.1.1.66 |
emergUnit in Emergency operationro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.1.67 |
analogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.1.2 |
temp_ambRoom Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.2.1 |
temp_extOutdoor Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.2.2 |
temp_mandDelivery Air Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.2.3 |
temp_circClosed Circuit (or Chilled) Water Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.2.4 |
temp_acHot Water Temperaturero Integer32 .1.3.6.1.4.1.9839.2.1.2.5 |
umid_ambRoom Relative Humidityro Integer32 .1.3.6.1.4.1.9839.2.1.2.6 |
t_setCooling Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.2.7 |
t_diffCooling Prop.Bandrw Integer32 .1.3.6.1.4.1.9839.2.1.2.8 |
t_set_cHeating Set pointrw Integer32 .1.3.6.1.4.1.9839.2.1.2.9 |
t_diff_cHeating Prop.Bandrw Integer32 .1.3.6.1.4.1.9839.2.1.2.10 |
ht_setRoom High Temp. Alarm Thresholdrw Integer32 .1.3.6.1.4.1.9839.2.1.2.11 |
lt_setRoom Low Temp. Alarm Thresholdrw Integer32 .1.3.6.1.4.1.9839.2.1.2.12 |
t_set_smSetback Mode: Cooling Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.2.13 |
t_set_c_smSetback Mode: Heating Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.2.14 |
t_cw_dhCW Set Point to Start Dehumidification Cyclerw Integer32 .1.3.6.1.4.1.9839.2.1.2.15 |
htset_cwCW High Temperature Alarm Thresholdrw Integer32 .1.3.6.1.4.1.9839.2.1.2.16 |
t_set_cwCW Set Point to Start CW Operating Mode (TC only)rw Integer32 .1.3.6.1.4.1.9839.2.1.2.17 |
t_rc_esRad-cooler Set Point in E.S. Mode (ES Only)rw Integer32 .1.3.6.1.4.1.9839.2.1.2.18 |
t_rc_estRad-cooler Set Point in DX Mode (ES Only)rw Integer32 .1.3.6.1.4.1.9839.2.1.2.19 |
rampa_valv0-10V Ramp 1 Value (CW Valve Ramp)ro Integer32 .1.3.6.1.4.1.9839.2.1.2.20 |
anaout20-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)ro Integer32 UNITS "N/A" .1.3.6.1.4.1.9839.2.1.2.21 |
steam_productionHumidifier: steam capacityro Integer32 .1.3.6.1.4.1.9839.2.1.2.22 |
t_set_lmDelivery Air Temperature Limit Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.2.23 |
delta_lmT+H Values: Mean/Local Diff. (aut. Changeover)rw Integer32 .1.3.6.1.4.1.9839.2.1.2.24 |
integerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9839.2.1.3 |
ore_filtroAir Filter Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.1 |
ore_unitUnit Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.2 |
ore_compr1Compressor 1 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.3 |
ore_compr2Compressor 2 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.4 |
ore_compr3Compressor 3 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.5 |
ore_compr4Compressor 4 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.6 |
ore_heat1Heater 1 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.7 |
ore_heat2Heater 2 Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.8 |
ore_umidHumidifier Working Houresro Integer32 .1.3.6.1.4.1.9839.2.1.3.9 |
hdiffDehumidification Proportional Bandrw Integer32 (-32767..32767) UNITS "rH%" .1.3.6.1.4.1.9839.2.1.3.12 |
hu_diffHumidification Proportional Bandrw Integer32 .1.3.6.1.4.1.9839.2.1.3.13 |
hh_setHigh Relative Humidity Alarm Thresholdrw Integer32 .1.3.6.1.4.1.9839.2.1.3.14 |
lh_setLow Relative Humidity Alarm Thresholdrw Integer32 .1.3.6.1.4.1.9839.2.1.3.15 |
hsetDehumidification Set Pointrw Integer32 (-32767..32767) UNITS "rH%" .1.3.6.1.4.1.9839.2.1.3.16 |
hset_smSetback Mode: Dehumidification Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.3.17 |
hu_setHumidification Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.3.18 |
hu_set_smSetback Mode: Humidification Set Pointrw Integer32 .1.3.6.1.4.1.9839.2.1.3.19 |
restart_delayRestart Delayrw Integer32 .1.3.6.1.4.1.9839.2.1.3.20 |
regul_delayRegulation Start Transitoryrw Integer32 .1.3.6.1.4.1.9839.2.1.3.21 |
time_lowpLow Pressure Delayrw Integer32 .1.3.6.1.4.1.9839.2.1.3.22 |
alarm_delayRoom T+H Alarm Delayrw Integer32 .1.3.6.1.4.1.9839.2.1.3.23 |
exc_timeAnti-Hunting Constant of Room Regulationrw Integer32 .1.3.6.1.4.1.9839.2.1.3.24 |
t_std_byStand-by Cycle Base Timerw Integer32 .1.3.6.1.4.1.9839.2.1.3.25 |
lan_unitTotal of units connected in LANrw Integer32 .1.3.6.1.4.1.9839.2.1.3.27 |
ciclo_smSet Back Mode: Fan Cyclical Start Intervalrw Integer32 .1.3.6.1.4.1.9839.2.1.3.28 |
More MIBs from CAREL SpA
Browse all CAREL SpAMIBs →KELVIN-pCOWeb-Chiller-MIB
SNMP MIB module
373 objects→
DataAire-dap4-al-MIB
The DataAire-dap4-al-MIB provides SNMP-based monitoring and management for Data Aire DAP4-AL precision air conditioning units, exposing critical environmental telemetry such as temperature, humidity, fan status, and alarm conditions. This module enables centralized infrastructure monitoring of cooling system health and operational parameters within data center or server room environments.
200 objects→
CAREL-ug40cdz-MIB
The CAREL-ug40cdz-MIB enables SNMP-based monitoring and management of the CAREL UG40 Close Control Uniflair HVAC unit, exposing operational parameters such as compressor status, fan speeds, temperature setpoints, and alarm states for real-time facility environmental control.
176 objects→
CAREL-RITTAL-LCP-3311-MIB
The CAREL-RITTAL-LCP-3311-MIB module enables SNMP-based monitoring and management of Rittal LCP 3311 chiller units via PCO web cards, exposing operational telemetry such as compressor status, refrigerant pressure, evaporator and condenser temperatures, fan speeds, and alarm states.
63 objects→
SCS-ks-MIB
The SCS-ks-MIB provides non-standard SNMP access to monitor and manage specific operational parameters and counters for the SCS KS hardware platform. This module enables the collection of device-specific telemetry data, such as session states and interface statistics, for the SCS KS system.
25 objects→