TPLINK-VOICEVLAN-MIB
The TPLINK-VOICEVLAN-MIB enables SNMP-based monitoring and configuration of Voice VLAN parameters on TP-Link network switches, specifically managing the association of VLAN IDs with specific MAC address ranges or IP subnets to prioritize voice traffic. This module facilitates the enforcement of Quality of Service (QoS) policies by allowing administrators to dynamically assign endpoints to dedicated voice VLANs for real-time communication services.
Imported Objects
Objects
24 total| Object Name |
|---|
tplinkVoiceVlanMIBPrivate MIB for voice vlan configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.19 |
TPLINK-TC-MIBPrivate MIB for voice vlan configuration. Unknown .1.3.6.1.4.1.11863.6.19 |
tplinkVoiceVlanMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.19.1 |
voiceVlanGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.19.1.1 |
voiceVlanGlobalEnableSelect Enable/Disable Voice VLAN function.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.19.1.1.1 |
voiceVlanIdEnter the VLAN ID of the voice VLAN,2-4094.rw INTEGER .1.3.6.1.4.1.11863.6.19.1.1.2 |
voiceVlanAgingTimeSpecifies the living time of the member port in auto mode
after the OUI address is aging out,1-43200 minute.rw INTEGER .1.3.6.1.4.1.11863.6.19.1.1.3 |
voiceVlanPrioritySelect the priority of the port when sending voice data.
0. Cos0
1. Cos1
2. Cos2
3. Cos3
4. Cos4
5. Cos5
6. Cos6
7. Cos7rw Enumeration .1.3.6.1.4.1.11863.6.19.1.1.4 |
voiceVlanPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.19.1.2 |
voiceVlanPortTableHere you can configure the parameters of the ports in the voice VLAN.. SEQUENCE OF VOICEVLANPORTENTRY .1.3.6.1.4.1.11863.6.19.1.2.1 |
voiceVlanPortEntryAn entry contains of the information of port param. VOICEVLANPORTENTRY .1.3.6.1.4.1.11863.6.19.1.2.1.1 |
voiceVlanPortNumberDisplays the port number of the Switch.ro OCTET STRING .1.3.6.1.4.1.11863.6.19.1.2.1.1.1 |
voiceVlanPortModeSelect the mode for the port to join the voice VLAN.
0. manual: In this mode, you can manually add a port to the
voice VLAN or remove a port from the voice VLAN
1. auto: In this mode, the switch automatically adds a port
to the voice VLAN or removes a port from the voice VLAN by
checking whether the port receives voice data or not.rw Enumeration .1.3.6.1.4.1.11863.6.19.1.2.1.1.2 |
voiceVlanPortSecurityConfigure the security mode for forwarding packets.
0. disable:All packets are forwarded.
1. enable:Only voice data are forwarded.rw Enumeration .1.3.6.1.4.1.11863.6.19.1.2.1.1.3 |
voiceVlanPortStatusDisplays the state of the port in the current voice VLAN.
0. inactive
1. activero Enumeration .1.3.6.1.4.1.11863.6.19.1.2.1.1.4 |
voiceVlanPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.19.1.2.1.1.5 |
voiceVlanOuiConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.19.1.3 |
voiceVlanOuiConfigTableThe switch determines whether a received packet is a voice
packet by checking its source MAC address. If the source
MAC addresses of packets comply with the OUI (organizationally
unique identifier) addresses configured by the system, the packets
are recognized as voice packets and transmitted in voice VLAN. SEQUENCE OF VOICEVLANOUICONFIGENTRY .1.3.6.1.4.1.11863.6.19.1.3.1 |
voiceVlanOuiConfigEntryAn entry contains of the information of a voice vlan oui. VOICEVLANOUICONFIGENTRY .1.3.6.1.4.1.11863.6.19.1.3.1.1 |
voiceVlanOuiEnter the OUI address of the voice device.rw OCTET STRING .1.3.6.1.4.1.11863.6.19.1.3.1.1.1 |
voiceVlanOuiMaskEnter the OUI address mask of the voice device.rw OCTET STRING .1.3.6.1.4.1.11863.6.19.1.3.1.1.2 |
voiceVlanDescriptionGive a description to the OUI for identification,1-16 characters.rw OCTET STRING .1.3.6.1.4.1.11863.6.19.1.3.1.1.3 |
voiceVlanRowStatusthe following two values are states:
these values may be read or written
active(1),
notInService(2),
the following value is a state:
this value may be read, but not written
notReady(3),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
createAndWait(5),
destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.19.1.3.1.1.4 |
tplinkVoiceVlanMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.19.2 |
More MIBs from Tplink
Browse all TplinkMIBs →SNMP MIB module
SNMP MIB module
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
The TPLINK-DHCPSERVER-MIB enables monitoring and management of DHCP server operational parameters, including active lease counts, address pool utilization, and server state status, specifically on TP-Link network devices. This module facilitates the tracking of dynamic IP address assignment metrics and server availability to ensure reliable client connectivity within the network infrastructure.
SNMP MIB module
The TPLINK-SPANNING-TREE-MIB enables monitoring and management of Spanning Tree Protocol (STP) states, port roles, and bridge IDs on TP-Link network switches. This private module provides access to critical topology metrics such as root bridge election status, port forwarding states, and loop prevention alerts to ensure Layer 2 network stability.