TPLINK-MLDSNOOPING-MIB
Private MIB for mldSnooping manage.
Main OID:
tplinkMldSnoopingMIB.1.3.6.1.4.1.11863.6.43
77
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
tplinkMldSnoopingMIBPrivate MIB for mldSnooping manage. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.43 |
IMPORTSPrivate MIB for mldSnooping manage. Unknown .1.3.6.1.4.1.11863.6.43 |
tplinkMldSnoopingMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1 |
tpMldSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1 |
tpMldSnoopingGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1.1 |
tpMldSnoopingEnableSelect Enable/Disable MLD Snooping function globally on the Switch.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.43.1.1.1.1 |
tpMldUnknownMulticastPacketSelect the operation for the switch to process unknown multicast.
0. forward
1. discardrw Enumeration .1.3.6.1.4.1.11863.6.43.1.1.1.2 |
tpMldUnknownReportSuppressionSelect Enable/Disable MLD Snooping report suppression function globally on the Switch.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.43.1.1.1.3 |
tpMldGlobalRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive MLD query message from the router port,
it will consider this port is not a router port any more,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.1.4 |
tpMldGlobalMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive MLD report message from the member port,
it will consider this port is not a member port any more,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.1.5 |
tpMldlastListenerQueryIntervalEnter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time to check whether there is another member. The interval is ranging from 1 to 5 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.1.6 |
tpMldlastListenerQueryCountEnter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether there is another member. It is ranging from 1 to 5.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.1.7 |
tpMldPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1.2 |
tpMldPortTableMLD Snooping (Internet Group Management Protocol Snooping)
is a multicast control mechanism running on Layer 2 switch.
It can effectively prevent multicast groups being broadcasted
in the network. SEQUENCE OF TPMLDPORTENTRY .1.3.6.1.4.1.11863.6.43.1.1.2.1 |
tpMldPortEntryAn entry contains of the information of port configure. TPMLDPORTENTRY .1.3.6.1.4.1.11863.6.43.1.1.2.1.1 |
tpMldSnoopingPortEnableSelect Enable/Disable MLD Snooping for the desired port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.43.1.1.2.1.1.2 |
tpMldFastLeavePortEnableSelect Enable/Disable Fast Leave feature for the desired port.
If Fast Leave is enabled for a port, the Switch will immediately
remove this port from the multicast group upon receiving MLD
leave messages.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.43.1.1.2.1.1.3 |
tpMldPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.2.1.1.4 |
tpMldVlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1.3 |
tpMldVlanTableMulticast groups established by MLD Snooping are based on VLANs.
You can configure different MLD parameters for different VLANs. SEQUENCE OF TPMLDVLANENTRY .1.3.6.1.4.1.11863.6.43.1.1.3.1 |
tpMldVlanEntryAn entry contains of the information of mldsnooping. TPMLDVLANENTRY .1.3.6.1.4.1.11863.6.43.1.1.3.1.1 |
tpMldVlanIdEnter the VLAN ID to enable MLD Snooping for the desired VLAN,1-4094.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.1 |
tpMldRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive MLD query message from the router port,
it will consider this port is not a router port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.2 |
tpMldMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive MLD report message from the member port,
it will consider this port is not a member port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3 |
tpMldRouterPortConfig the static router ports which are mainly used in the network with
stable topology.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.4 |
tpMldForbiddenRouterPortConfig the forbidden router ports which are mainly used to forbidden
specified ports to become router ports.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.5 |
tpMldVlanStatusthe following two values are states:
these values may be read or written
active(1),
notInService(2),
the following value is a state:
this value may be read, but not written
notReady(3),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
createAndWait(5),
destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.43.1.1.3.1.1.6 |
tpMldMultiVlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1.4 |
tpMldMultiVlanIdEnter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.4.1 |
tpMldMultitRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive MLD query message from the router port,
it will consider this port is not a router port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.4.2 |
tpMldMultiMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive MLD report message from the member port,
it will consider this port is not a member port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.4.3 |
tpMldMultiRouterPortConfig the static router ports which are mainly used in the network with
stable topology.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.4.4 |
tpMldMultiForbiddenRouterPortConfig the forbidden router ports which are mainly used to forbidden
specified ports to become router ports.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.4.5 |
tpMldMultiReplaceSrcIpconfig the source ip which will replace the source ip of MLD report in
multicast vlan.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.4.6 |
tpMldQuerierConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.1.5 |
mldQuerierTableMLD Snooping Querier is based on VLAN. You can configure
different MLD Snooping Querier parameters for different VLANs. SEQUENCE OF MldQuerierEntry .1.3.6.1.4.1.11863.6.43.1.1.5.1 |
mldQuerierEntryAn entry contains of the information of MLD Snooping Querier. MldQuerierEntry .1.3.6.1.4.1.11863.6.43.1.1.5.1.1 |
mldQuerierVlanIdEnter the VLAN ID to enable MLD Snooping Querier for the desired VLAN, ranging from 1 to 4094.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.1.5.1.1.1 |
mldQueryIntervalEnter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.5.1.1.2 |
mldMaxResponseTimeEnter the value of Maximum Response Time field of the Query message. The host is expected to response to an MLD general query within this time. The time is ranging from 1 to 25 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.1.5.1.1.3 |
mldGeneralQuerySrcIpEnter the General Query Message source IP address.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.1.5.1.1.4 |
mldQuerierStatusThe following values are states:
these values may be used as follow:
active(1),if the entry is being used.
createAndGo(4),not being used.
destroy(6),destory the entry.rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.43.1.1.5.1.1.5 |
tpMldFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.2 |
tpMldPortFilterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.2.1 |
tpMldFilterPortTableWhen the switch receives MLD report message, it examines
the multicast filtering IP ID configured on the access port
to determine if the port can join the multicast group.
If the multicast IP is not filtered, the switch will add
the port to the forward port list of the multicast group.
Otherwise, the switch will drop the MLD report message.
In that way, you can control the multicast groups that users
can access. SEQUENCE OF TPMLDFILTERPORTENTRY .1.3.6.1.4.1.11863.6.43.1.2.1.1 |
tpMldFilterPortEntryAn entry contains of the information of a port param. TPMLDFILTERPORTENTRY .1.3.6.1.4.1.11863.6.43.1.2.1.1.1 |
tpMldFilterMaxGroupSpecify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.2.1.1.1.2 |
tpMldFilterMaxGroupActionThe policy should be taken when the number of multicast group
a port has joined reach the maximum.
0.Drop: drop the successive report packet, and this port can
not join any other multicast group.
1.Replace: when the port joins another new multicast group,it
will quit the existing multicast group randomly.rw Enumeration .1.3.6.1.4.1.11863.6.43.1.2.1.1.1.3 |
tpMldFilterBindAddrIdEnter the profile ID the port will be bound to. Only one profile
can be bound to each port.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.2.1.1.1.4 |
tpMldFilterPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.43.1.2.1.1.1.5 |
tpMldPacketStatistic OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.3 |
tpMldPktStat OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.3.1 |
tpMldPktStatTableA list of multicast statistic Table. SEQUENCE OF TPMLDPKTSTATENTRY .1.3.6.1.4.1.11863.6.43.1.3.1.1 |
tpMldPktStatEntryAn entry contains of multicast packet statistics over each port. TPMLDPKTSTATENTRY .1.3.6.1.4.1.11863.6.43.1.3.1.1.1 |
tpMldQueryPktStatDisplays the number of query packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.3.1.1.1.2 |
tpMldReportV1PktStatDisplays the number of MLDv1 report packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.3.1.1.1.3 |
tpMldReportV2PktStatDisplays the number of MLDv2 report packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.3.1.1.1.4 |
tpMldDonePktStatDisplays the number of done packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.3.1.1.1.6 |
tpMldErrorPktStatDisplays the number of error packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.3.1.1.1.7 |
tpIpMldPktStatClearmld packet statistic clear.rw Enumeration .1.3.6.1.4.1.11863.6.43.1.3.1.2 |
tpMldMultigroup OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.4 |
tpMldMulticastGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.4.1 |
tpMldMulticastGroupTableA list of multicast groups Table. SEQUENCE OF TPMLDMULTICASTGROUPENTRY .1.3.6.1.4.1.11863.6.43.1.4.1.1 |
tpMldMulticastGroupEntryAn entry contains of multicast packet statistics over each port. TPMLDMULTICASTGROUPENTRY .1.3.6.1.4.1.11863.6.43.1.4.1.1.1 |
tpMldMulticastIPDisplays the multicast IP address.ro OCTET STRING .1.3.6.1.4.1.11863.6.43.1.4.1.1.1.1 |
tpMldVlanIDDisplays the VLAN ID.ro INTEGER .1.3.6.1.4.1.11863.6.43.1.4.1.1.1.2 |
tpMldForwardPortsDisplays the forward ports of multicast group.ro OCTET STRING .1.3.6.1.4.1.11863.6.43.1.4.1.1.1.3 |
tpMldGrouptypeDisplays the type of multicast group.ro Enumeration .1.3.6.1.4.1.11863.6.43.1.4.1.1.1.4 |
tpMldStaticMultigroup OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.5 |
tpMldMulticastStaticGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.1.5.1 |
tpMldMulticastStaticGroupTableA list of multicast groups Table. SEQUENCE OF TPMLDMULTICASTSTATICGROUPENTRY .1.3.6.1.4.1.11863.6.43.1.5.1.1 |
tpMldMulticastStaticGroupEntryAn entry contains of multicast packet statistics over each port. TPMLDMULTICASTSTATICGROUPENTRY .1.3.6.1.4.1.11863.6.43.1.5.1.1.1 |
tpMldStaticMulticastIPThe multicast IP address.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.5.1.1.1.1 |
tpMldStaticVlanIDThe VLAN ID.rw INTEGER .1.3.6.1.4.1.11863.6.43.1.5.1.1.1.2 |
tpMldStaticForwardPortsThe forward ports of multicast group.rw OCTET STRING .1.3.6.1.4.1.11863.6.43.1.5.1.1.1.3 |
tpMldStaticGroupStatusThe following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5),creat a new entry
destroy(6),destory the entry.rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.43.1.5.1.1.1.4 |
tplinkMldSnoopingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.43.2 |