TPLINK-IGMPSNOOPING-MIB
Private MIB for igmpSnooping manage.
Main OID:
tplinkIgmpSnoopingMIB.1.3.6.1.4.1.11863.6.25
86
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
86 total| Object Name |
|---|
tplinkIgmpSnoopingMIBPrivate MIB for igmpSnooping manage. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.25 |
IMPORTSPrivate MIB for igmpSnooping manage. Unknown .1.3.6.1.4.1.11863.6.25 |
tplinkIgmpSnoopingMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1 |
tpIgmpSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1 |
tpIgmpSnoopingGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1.1 |
tpIgmpSnoopingEnableSelect Enable/Disable IGMP Snooping function globally on the Switch.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.25.1.1.1.1 |
tpUnknownMulticastPacketSelect the operation for the switch to process unknown multicast.
0. forward
1. discardrw Enumeration .1.3.6.1.4.1.11863.6.25.1.1.1.2 |
tpUnknownReportSuppressionSelect Enable/Disable IGMP Snooping report suppression function globally on the Switch.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.25.1.1.1.3 |
tpIgmpGlobalRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive IGMP query message from the router port,
it will consider this port is not a router port any more,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.1.4 |
tpIgmpGlobalMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive IGMP report message from the member port,
it will consider this port is not a member port any more,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.1.5 |
tpIgmplastListenerQueryIntervalEnter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time to check whether there is another member. The interval is ranging from 1 to 5 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.1.6 |
tpIgmplastListenerQueryCountEnter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether there is another member. It is ranging from 1 to 5.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.1.7 |
tpIgmpPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1.2 |
tpIgmpPortTableIGMP Snooping (Internet Group Management Protocol Snooping)
is a multicast control mechanism running on Layer 2 switch.
It can effectively prevent multicast groups being broadcasted
in the network. SEQUENCE OF TPIGMPPORTENTRY .1.3.6.1.4.1.11863.6.25.1.1.2.1 |
tpIgmpPortEntryAn entry contains of the information of port configure. TPIGMPPORTENTRY .1.3.6.1.4.1.11863.6.25.1.1.2.1.1 |
tpIgmpSnoopingPortEnableSelect Enable/Disable IGMP Snooping for the desired port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.25.1.1.2.1.1.2 |
tpIgmpFastLeavePortEnableSelect Enable/Disable Fast Leave feature for the desired port.
If Fast Leave is enabled for a port, the Switch will immediately
remove this port from the multicast group upon receiving IGMP
leave messages.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.25.1.1.2.1.1.3 |
tpIgmpPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.25.1.1.2.1.1.4 |
tpIgmpVlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1.3 |
tpIgmpVlanTableMulticast groups established by IGMP Snooping are based on VLANs.
You can configure different IGMP parameters for different VLANs. SEQUENCE OF TPIGMPVLANENTRY .1.3.6.1.4.1.11863.6.25.1.1.3.1 |
tpIgmpVlanEntryAn entry contains of the information of igmpsnooping. TPIGMPVLANENTRY .1.3.6.1.4.1.11863.6.25.1.1.3.1.1 |
tpIgmpVlanIdEnter the VLAN ID to enable IGMP Snooping for the desired VLAN,1-4094.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.1 |
tpIgmpRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive IGMP query message from the router port,
it will consider this port is not a router port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2 |
tpIgmpMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive IGMP report message from the member port,
it will consider this port is not a member port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.3 |
tpIgmpRouterPortConfig the static router ports which are mainly used in the network with
stable topology.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.4 |
tpIgmpForbiddenRouterPortConfig the forbidden router ports which are mainly used to forbidden
specified ports to become router ports.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.5 |
tpIgmpVlanStatusthe following two values are states:
these values may be read or written
active(1),
notInService(2),
the following value is a state:
this value may be read, but not written
notReady(3),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
createAndWait(5),
destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.25.1.1.3.1.1.6 |
tpIgmpMultiVlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1.4 |
tpIgmpMultiVlanIdEnter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.4.1 |
tpIgmpMultitRouterTimeSpecify the aging time of the router port. Within this time,
if the switch don't receive IGMP query message from the router port,
it will consider this port is not a router port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.4.2 |
tpIgmpMultiMemberTimeSpecify the aging time of the member port. Within this time,
if the switch don't receive IGMP report message from the member port,
it will consider this port is not a member port any more,0,60-600 second.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.4.3 |
tpIgmpMultiRouterPortConfig the static router ports which are mainly used in the network with
stable topology.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.1.4.4 |
tpIgmpMultiForbiddenRouterPortConfig the forbidden router ports which are mainly used to forbidden
specified ports to become router ports.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.1.4.5 |
tpIgmpMultiReplaceSrcIpconfig the source ip which will replace the source ip of IGMP report in
multicast vlan.rw IpAddress .1.3.6.1.4.1.11863.6.25.1.1.4.6 |
tpIgmpQuerierConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.1.5 |
igmpQuerierTableIGMP Snooping Querier is based on VLAN. You can configure
different IGMP Snooping Querier parameters for different VLANs. SEQUENCE OF IgmpQuerierEntry .1.3.6.1.4.1.11863.6.25.1.1.5.1 |
igmpQuerierEntryAn entry contains of the information of IGMP Snooping Querier. IgmpQuerierEntry .1.3.6.1.4.1.11863.6.25.1.1.5.1.1 |
igmpQuerierVlanIdEnter the VLAN ID to enable IGMP Snooping Querier for the desired VLAN, ranging from 1 to 4094.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.1.5.1.1.1 |
queryIntervalEnter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.5.1.1.2 |
maxResponseTimeEnter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ranging from 1 to 25 seconds.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.1.5.1.1.3 |
generalQuerySrcIpEnter the General Query Message source IP address.rw IpAddress .1.3.6.1.4.1.11863.6.25.1.1.5.1.1.4 |
igmpQuerierStatusThe following values are states:
these values may be used as follow:
active(1),if the entry is being used.
createAndGo(4),not being used.
destroy(6),destory the entry.rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.25.1.1.5.1.1.5 |
tpIgmpFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.2 |
tpIgmpPortFilterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.2.1 |
tpIgmpFilterPortTableWhen the switch receives IGMP report message, it examines
the multicast filtering IP ID configured on the access port
to determine if the port can join the multicast group.
If the multicast IP is not filtered, the switch will add
the port to the forward port list of the multicast group.
Otherwise, the switch will drop the IGMP report message.
In that way, you can control the multicast groups that users
can access. SEQUENCE OF TPIGMPFILTERPORTENTRY .1.3.6.1.4.1.11863.6.25.1.2.1.1 |
tpIgmpFilterPortEntryAn entry contains of the information of a port param. TPIGMPFILTERPORTENTRY .1.3.6.1.4.1.11863.6.25.1.2.1.1.1 |
tpIgmpFilterMaxGroupSpecify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.rw INTEGER .1.3.6.1.4.1.11863.6.25.1.2.1.1.1.2 |
tpIgmpFilterMaxGroupActionThe policy should be taken when the number of multicast group
a port has joined reach the maximum.
0.Drop: drop the successive report packet, and this port can
not join any other multicast group.
1.Replace: when the port joins another new multicast group,it
will quit the existing multicast group randomly.rw Enumeration .1.3.6.1.4.1.11863.6.25.1.2.1.1.1.3 |
tpIgmpFilterBindAddrIdEnter the profile ID the port will be bound to. Only one profile
can be bound to each port.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.2.1.1.1.4 |
tpIgmpFilterPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.25.1.2.1.1.1.5 |
tpIgmpAuth OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.3 |
tpIgmpPortAuthConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.3.1 |
tpIgmpAuthPortTableIGMP Authentication can control the access of multicast packets. SEQUENCE OF TPIGMPAUTHPORTENTRY .1.3.6.1.4.1.11863.6.25.1.3.1.1 |
tpIgmpAuthPortEntryAn entry contains of the information of port authentication configure. TPIGMPAUTHPORTENTRY .1.3.6.1.4.1.11863.6.25.1.3.1.1.1 |
tpIgmpAuthEnableSelect Enable/Disable IGMP Authentication for the desired port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.25.1.3.1.1.1.2 |
tpIgmpAuthPortLagDisplays the LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.25.1.3.1.1.1.3 |
tpIgmpGlobalAuthAccountConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.3.2 |
tpIgmpGlobalAuthAccountConfigEable0. disable
1. enable
Enable/Disable the IGMP Authentication Accounting.rw Enumeration .1.3.6.1.4.1.11863.6.25.1.3.2.1 |
tpIgmpPacketStatistic OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.4 |
tpIgmpPktStat OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.4.1 |
tpIgmpPktStatTableA list of multicast statistic Table. SEQUENCE OF TPIGMPPKTSTATENTRY .1.3.6.1.4.1.11863.6.25.1.4.1.1 |
tpIgmpPktStatEntryAn entry contains of multicast packet statistics over each port. TPIGMPPKTSTATENTRY .1.3.6.1.4.1.11863.6.25.1.4.1.1.1 |
tpIgmpQueryPktStatDisplays the number of query packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.2 |
tpIgmpReportV1PktStatDisplays the number of IGMPv1 report packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.3 |
tpIgmpReportV2PktStatDisplays the number of IGMPv2 report packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.4 |
tpIgmpReportV3PktStatDisplays the number of IGMPv3 report packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.5 |
tpIgmpLeavePktStatDisplays the number of leave packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.6 |
tpIgmpErrorPktStatDisplays the number of error packets the port received.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.4.1.1.1.7 |
tpIpIgmpPktStatClearigmp packet statistic clear.rw Enumeration .1.3.6.1.4.1.11863.6.25.1.4.1.2 |
tpIgmpMultigroup OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.5 |
tpIgmpMulticastGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.5.1 |
tpIgmpMulticastGroupTableA list of multicast groups Table. SEQUENCE OF TPIGMPMULTICASTGROUPENTRY .1.3.6.1.4.1.11863.6.25.1.5.1.1 |
tpIgmpMulticastGroupEntryAn entry contains of multicast packet statistics over each port. TPIGMPMULTICASTGROUPENTRY .1.3.6.1.4.1.11863.6.25.1.5.1.1.1 |
tpIgmpMulticastIPDisplays the multicast IP address.ro IpAddress .1.3.6.1.4.1.11863.6.25.1.5.1.1.1.1 |
tpIgmpVlanIDDisplays the VLAN ID.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.5.1.1.1.2 |
tpIgmpForwardPortsDisplays the forward ports of multicast group.ro OCTET STRING .1.3.6.1.4.1.11863.6.25.1.5.1.1.1.3 |
tpIgmpGrouptypeDisplays the type of multicast group.ro Enumeration .1.3.6.1.4.1.11863.6.25.1.5.1.1.1.4 |
tpIgmpStaticMultigroup OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.6 |
tpIgmpMulticastStaticGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.1.6.1 |
tpIgmpMulticastStaticGroupTableA list of multicast groups Table. SEQUENCE OF TPIGMPMULTICASTSTATICGROUPENTRY .1.3.6.1.4.1.11863.6.25.1.6.1.1 |
tpIgmpMulticastStaticGroupEntryAn entry contains of multicast packet statistics over each port. TPIGMPMULTICASTSTATICGROUPENTRY .1.3.6.1.4.1.11863.6.25.1.6.1.1.1 |
tpIgmpStaticMulticastIPThe multicast IP address.ro IpAddress .1.3.6.1.4.1.11863.6.25.1.6.1.1.1.1 |
tpIgmpStaticVlanIDThe VLAN ID.ro INTEGER .1.3.6.1.4.1.11863.6.25.1.6.1.1.1.2 |
tpIgmpStaticForwardPortsThe forward ports of multicast group.rw OCTET STRING .1.3.6.1.4.1.11863.6.25.1.6.1.1.1.3 |
tpIgmpStaticGroupStatusThe following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5),creat a new entry
destroy(6),destory the entry.rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.25.1.6.1.1.1.4 |
tplinkIgmpSnoopingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.25.2 |