TPLINK-LLDPMEDCONFIG-MIB
LLDP-MED Private MIB.
Main OID:
lldpMedNeighborInfo.1.3.6.1.4.1.11863.6.35.1.4.5
84
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
84 total| Object Name |
|---|
lldpMed OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.35.1.4 |
TPLINK-TC-MIB Unknown .1.3.6.1.4.1.11863.6.35.1.4 |
lldpMedGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.35.1.4.1 |
lldpMedGlobalConfigFastStartRepeatCountWhen entering LLDP-MED fast start mechanism, multiple LLDP-MED frames will be transmitted based on this parameter.rw INTEGER .1.3.6.1.4.1.11863.6.35.1.4.1.1 |
lldpMedPortConfigTableA table that contains LLDP-MED information of every port. SEQUENCE OF LLDPMEDPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.35.1.4.2 |
lldpMedPortConfigEntryA list of LLDP-MED information for every port of the device. LLDPMEDPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.35.1.4.2.1 |
lldpMedConfigPortIdThe port id of the switch.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.2.1.1 |
lldpMedConfigPortStatusSelect Enable/Disable LLDP-MED for the Port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.2.1.2 |
lldpMedConfigPortTlvNetworkPolicySelect Enable/Disable Network Policy TLV for the Port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.2.1.3 |
lldpMedConfigPortTlvLocationIdSelect Enable/Disable Location Identification TLV for the Port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.2.1.4 |
lldpMedConfigPortTlvExtendedPowerSelect Enable/Disable Extended Power-Via-MDI TLV for the Port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.2.1.5 |
lldpMedConfigPortTlvInventorySelect Enable/Disable Inventory TLV for the Port.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.2.1.6 |
lldpMedPortConfigTlvLocationTableA table that contains LLDP-MED Location Identification TLV information of every port. SEQUENCE OF LLDPMEDPORTCONFIGTLVLOCATIONENTRY .1.3.6.1.4.1.11863.6.35.1.4.3 |
lldpMedPortConfigTlvLocationEntryA list of LLDP-MED Location Identification TLV information for every port of the device. LLDPMEDPORTCONFIGTLVLOCATIONENTRY .1.3.6.1.4.1.11863.6.35.1.4.3.1 |
lldpMedConfigLocationPortIdThe port id of the switch.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.1 |
lldpMedConfigPortLocationEmergencyNumberEmergency number is Emergency Call Service ELIN identifier, which is used during emergency
call setup to a traditional CAMA or ISDN trunk-based PSAP.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.2 |
lldpMedConfigPortLocationCivicAddressWhatThis element describes which location the DHCP entry refers to. Currently, three options are
defined: the location of the DHCP server (0: DHCP server), the location of the network element
believed to be closest to the client (1: Switch) or the location of the client (2: LLDP-MED
Endpoint). Option (2) should be used, but may not be known. Options (0) and (1) should not be
used unless it is known that the DHCP client is in close physical proximity to the server
or network element.rw Enumeration .1.3.6.1.4.1.11863.6.35.1.4.3.1.3 |
lldpMedConfigPortLocationCivicAddressCountryCodeThe two-letters ISO 3166 country code in capital ASCII letters, e.g., CN or US.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.4 |
lldpMedConfigPortLocationCivicAddressLanguageLanguage.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.5 |
lldpMedConfigPortLocationCivicAddressProvinceProvince or State.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.6 |
lldpMedConfigPortLocationCivicAddressCountyCounty.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.7 |
lldpMedConfigPortLocationCivicAddressCityCity.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.8 |
lldpMedConfigPortLocationCivicAddressStreetStreet.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.9 |
lldpMedConfigPortLocationCivicAddressHouseNumberHouse number.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.10 |
lldpMedConfigPortLocationCivicAddressNameResidence and office occupant name.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.11 |
lldpMedConfigPortLocationCivicAddressPostalZipCodePostal/zip code.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.12 |
lldpMedConfigPortLocationCivicAddressRoomNumberRoom number.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.13 |
lldpMedConfigPortLocationCivicAddressPostOfficeBoxPost office box.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.14 |
lldpMedConfigPortLocationCivicAddressAdditionalAdditional information.rw OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.3.1.15 |
lldpMedLocalInfoTableLocal port LLDP-MED information entries. SEQUENCE OF LLDPMEDLOCALINFOENTRY .1.3.6.1.4.1.11863.6.35.1.4.4 |
lldpMedLocalInfoEntryAn entry contains of the LLDP-MED information of local port of the switch. LLDPMEDLOCALINFOENTRY .1.3.6.1.4.1.11863.6.35.1.4.4.1 |
lldpMedLocalPortIdDisplay the port index.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.1 |
lldpMEDLocalCapabilitiesDisplay the LLDP-MED capabilities the switch supports.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.2 |
lldpMedLocalDeviceTypeLLDP-MED devices are comprised of two primary device types: Network Connectivity Devices
and Endpoint Devices. In turn, Endpoint Devices are composed of three defined Classes:
Class I, Class II and Class III. Switch is a Network Connectivity Device.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.3 |
lldpMedLocalApplicationTypeDisplay the primary function of the applications defined for the network policy.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.4 |
lldpMedLocalUnknownPolicyA value of 'Yes' indicates that the network policy for the specified application type is currently
unknown. In this case, the VLAN ID, the Layer 2 Priority and the DSCP value fields are ignored. A
value of 'No' indicates that this network policy is defined.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.5 |
lldpMedLocalAppTaggedIndicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.6 |
lldpMedLocalAppVLANIDAn extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.4.1.7 |
lldpMedLocalAppLayer2PriorityContain the value of the 802.1p priority which is associated with the given port on the
local system.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.4.1.8 |
lldpMedLocalAppDSCPContain the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474
and RFC 2475 which is associated with the given port on the local system.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.4.1.9 |
lldpMedLocalLocationDataFormatThe location subtype advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.10 |
lldpMedLocalLocationIDThe location information. Parsing of this information is depedent upon the location subtype.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.11 |
lldpMedLocalPowerTypeDefines the type of Power-Via-MDI advertised by the local device.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.12 |
lldpMedLocalPowerSourceDefines the type of PSE Power Source advertised by the local device.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.13 |
lldpMedLocalPowerPriorityReflects the PD power priority that is being advertised on this PSE port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.14 |
lldpMedLocalPowerValueContain the value of the power available from the PSE via this port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.15 |
lldpMedLocalInventoryHardwareRevisionThe vendor-specific hardware revision string as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.16 |
lldpMedLocalInventoryFirmwareRevisionThe vendor-specific firmware revision string as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.17 |
lldpMedLocalInventorySoftwareRevisionThe vendor-specific software revision string as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.18 |
lldpMedLocalInventorySerialNumberThe vendor-specific serial number as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.19 |
lldpMedLocalInventoryManufacturerNameThe vendor-specific manufacturer name as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.20 |
lldpMedLocalInventoryModelNameThe vendor-specific model name as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.21 |
lldpMedLocalInventoryAssetIDThe vendor-specific asset tracking identifier as advertised by the local system.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.4.1.22 |
lldpMedNeighborInfoLLDP-MED Private MIB. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.35.1.4.5 |
lldpMedNeighborInfoTableNeighbor port information entries. SEQUENCE OF LLDPMEDNEIGHBORINFOENTRY .1.3.6.1.4.1.11863.6.35.1.4.5.1 |
lldpMedNeighborInfoEntryAn entry contains of the information of neighbor port except the network policy information. LLDPMEDNEIGHBORINFOENTRY .1.3.6.1.4.1.11863.6.35.1.4.5.1.1 |
lldpMedNeighborPortIdDisplay the port index.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.1 |
lldpMedNeighborPortIndexIdDisplay the neighbor index.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.2 |
lldpMEDNeighborCapabilitiesLLDP-MED capabilities of remote devices connected to the device ports and
communicating via LLDP-MED.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.3 |
lldpMedNeighborDeviceTypeDevice Class as advertised by the device remotely connected to the port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.4 |
lldpMedNeighborLocationDataFormatThe location subtype advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.5 |
lldpMedNeighborLocationIDThe location information advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.6 |
lldpMedNeighborPowerTypeDefines the type of Power-Via-MDI advertised by the remote device.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.7 |
lldpMedNeighborPowerSourceDefines the type of Power Source advertised as being used by the device
connected remotely to the port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.8 |
lldpMedNeighborPowerPriorityDefinces the priority advertised as being required by the PD connected
remotely to the port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.9 |
lldpMedNeighborPowerValueConatin the value of the power required by a PD connected remotely to the port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.10 |
lldpMedNeighborInventoryHardwareRevisionThe vendor-specific hardware revision string as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.11 |
lldpMedNeighborInventoryFirmwareRevisionThe vendor-specific firmware revision string as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.12 |
lldpMedNeighborInventorySoftwareRevisionThe vendor-specific software revision string as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.13 |
lldpMedNeighborInventorySerialNumberThe vendor-specific serial number as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.14 |
lldpMedNeighborInventoryManufacturerNameThe vendor-specific manufacturer name as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.15 |
lldpMedNeighborInventoryModelNameThe vendor-specific model name as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.16 |
lldpMedNeighborInventoryAssetIDThe vendor-specific asset tracking identifier as advertised by the remote endpoint.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.1.1.17 |
lldpMedNeighborMediaPolicyInfoTableNeighbor port media policy information entries. SEQUENCE OF LLDPMEDNEIGHBORINFOAPPENTRY .1.3.6.1.4.1.11863.6.35.1.4.5.2 |
lldpMedNeighborMediaPolicyInfoEntryInformation about a particular policy on a specific port component. LLDPMEDNEIGHBORINFOAPPENTRY .1.3.6.1.4.1.11863.6.35.1.4.5.2.1 |
lldpMedNeighborPortDisplay the port index.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.1 |
lldpMedNeighborPortIndexDisplay the neighbor index.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.2 |
lldpMedNeighborMediaPolicyIndexDisplay the neighbor media policy index.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.3 |
lldpMedNeighborApplicationTypeThe media type that defines the primary function of the application for the
policy advertised by the endpoint connected remotely to this port.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.4 |
lldpMedNeighborUnknownPolicyA value of 'Yes' indicates that the network policy for the specified application
type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the
DSCP value fields are ignored. A value of 'No' indicates that this network policy
is defined.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.5 |
lldpMedNeighborAppTaggedIndicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN.ro OCTET STRING .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.6 |
lldpMedNeighborAppVLANIDAn extension of the VLAN Identifier for the remote system connected to this port,
as defined in IEEE 802.1P-1998.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.7 |
lldpMedNeighborAppLayer2PriorityContain the value of the 802.1p priority which is associated with the remote
system connected at given port.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.8 |
lldpMedNeighborAppDSCPContain the value of the Differentiated Service Code Point (DSCP) as defined
in IETF 2474 and RFC 2475 which is assocaited with remote system connected
at the port.ro INTEGER .1.3.6.1.4.1.11863.6.35.1.4.5.2.1.9 |