TPLINK-ACL-RULE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
78
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
tpAclRuleConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.1.1 |
tpMacRuleTableA list of L2 MAC ACL rule entries. Here you can add MAC ACL rules for further ACL configuration. SEQUENCE OF TPMACRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.1 |
tpMacRuleEntryAn entry contains of the information of MAC ACL. TPMACRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.1.1 |
tpMacAclIdMAC ACL ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.1.1.1 |
tpMacRuleIdMAC ACL rule ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.1.1.2 |
tpMacSecOperationMAC ACL Security Operation.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.1.1.3 |
tpMacSmacAddressSource MAC address, string length setting to zero means that the source MAC address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.1.1.4 |
tpMacSmacMaskSource Mac Mask, string length setting to zero means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.1.1.5 |
tpMacDmacAddressDestination MAC address, string length setting to zero means that the destination MAC address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.1.1.6 |
tpMacDmacMaskDestination Mac Mask, string length setting to zero means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.1.1.7 |
tpMacVlanIdVLAN ID, 0-4094, value '0' means that the vid field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.1.1.8 |
tpMacEtherTypeEthernet protocol type, 0x0-0x10000. Value '65536' or '0x10000' means that the EtherType field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.1.1.9 |
tpMacPri802.1P priority, 0-8, value '8' means that the priority field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.1.1.10 |
tpMacTimeSegmentMAC ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.1.1.11 |
tpMacRuleStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.1.1.1.12 |
tpStdipRuleTableA list of standard IP rule entries. Here you can add standard IP ACL rules for further ACL configuration. SEQUENCE OF TPSTDIPRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.2 |
tpStdipRuleEntryAn entry contains of the information of STDIP ACL. TPSTDIPRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.2.1 |
tpStdipAclIdStandard IP ACL ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.2.1.1 |
tpStdipRuleIdStandard IP ACL rule ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.2.1.2 |
tpStdipSecOperationStandard IP ACL Security Operation.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.2.1.3 |
tpStdipSipAddressSource IP address, value '0.0.0.0' means that the source IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.2.1.4 |
tpStdipSipMaskSource IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.2.1.5 |
tpStdipDipAddressDestination IP address, value '0.0.0.0' means that the destination IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.2.1.6 |
tpStdipDipMaskDestination IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.2.1.7 |
tpStdipTimeSegmentSTDIP ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.2.1.8 |
tpStdipRuleStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.1.2.1.9 |
tpExtipRuleTableA list of extended IP rule entries. Here you can add extended IP ACL rules for further ACL configuration. SEQUENCE OF TPEXTIPRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.3 |
tpExtipRuleEntryAn entry contains of the information of EXTIP ACL. TPEXTIPRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.3.1 |
tpExtipAclIdExtended IP ACL ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.1 |
tpExtipRuleIdExtended IP ACL rule ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.2 |
tpExtipSecOperationExtended IP ACL Security Operation.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.3.1.3 |
tpExtipFragmentExtended IP fragment, conflicts with all the L4 feature.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.3.1.4 |
tpExtipSipAddressSource IP address, value '0.0.0.0' means that the source IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.3.1.5 |
tpExtipSipMaskSource IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.3.1.6 |
tpExtipDipAddressDestination IP address, value '0.0.0.0' means that the Destination IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.3.1.7 |
tpExtipDipMaskDestination IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.3.1.8 |
tpExtipProtocolL4 protocol type, 0-255, value '0' means this field is disabled. This field conflicts with the TCP Flags or the source/destination port numbers when it is not the value '6'(TCP), or '17'(UDP).rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.9 |
tpExtipTcpFlagExtended IP TCP flag, this field is described as a bit-map structure: There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0). The lower 6 bits show us the 6 kind of TCP flags' value (0-1). From the highest bit(bit11) to the lowest bit(0), each bit stands for a TCP flag: bit11 & bit5 -- URG flag bit10 & bit4 -- ACK flag bit9 & bit3 -- PSH flag bit8 & bit2 -- RST flag bit7 & bit1 -- SYN flag bit6 & bit0 -- FIN flagrw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.10 |
tpExtipSourcePortExtended IP TCP/UDP source port, 0-65536, value '65536' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.11 |
tpExtipDestPortExtended IP TCP/UDP destination port, 0-65536, value '65536' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.12 |
tpExtipDscpExtended IP DSCP, 0-64, value '64' means this field is disabled. conflicts with the Tos and Pre.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.13 |
tpExtipTosExtended IP type of service(ToS), 0-16, value '16' means this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.14 |
tpExtipPreExtended IP pre, 0-8, value '8' means this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.3.1.15 |
tpExtipTimeSegmentEXTIP ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.3.1.16 |
tpExtipRuleStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.1.3.1.17 |
tpCombRuleTableA list of combined MAC+IP rule entries. Here you can add combined ACL rules for further ACL configuration. SEQUENCE OF TPCOMBRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.4 |
tpCombRuleEntryAn entry contains of the information of Combined ACL. TPCOMBRULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.4.1 |
tpCombAclIdCombined MAC+IP ACL ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.4.1.1 |
tpCombRuleIdCombined ACL rule ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.4.1.2 |
tpCombSecOperationCombined ACL Security Operation.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.4.1.3 |
tpCombSmacAddressSource MAC address, string length setting to zero means that the source MAC address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.4.1.4 |
tpCombSmacMaskSource MAC Mask, string length setting to zero means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.4.1.5 |
tpCombDmacAddressDestination MAC address, string length setting to zero means that the destination MAC address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.4.1.6 |
tpCombDmacMaskDestination MAC Mask, string length setting to zero means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.4.1.7 |
tpCombVlanIdVLAN ID, 0-4094, value '0' means that the vid field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.4.1.8 |
tpCombEtherTypeEthernet protocol type, 0x0-0x10000. Value '65536' or '0x10000' means that the EtherType field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.4.1.9 |
tpCombPri802.1P priority, 0-8, value '8' means that the priority field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.4.1.10 |
tpCombSipAddressSource IP address, value '0.0.0.0' means that the source IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.4.1.11 |
tpCombSipMaskSource IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.4.1.12 |
tpCombDipAddressDestination IP address, value '0.0.0.0' means that the destination IP address is disabled.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.4.1.13 |
tpCombDipMaskDestination IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11863.6.26.1.1.4.1.14 |
tpCombTimeSegmentCombined ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.4.1.15 |
tpCombRuleStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.1.4.1.16 |
tpIPv6RuleTableA list of IPv6 rule entries. Here you can add IPv6 ACL rules for further ACL configuration. SEQUENCE OF TPIPV6RULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.5 |
tpIPv6RuleEntryAn entry contains of the information of IPv6 ACL. TPIPV6RULEENTRY .1.3.6.1.4.1.11863.6.26.1.1.5.1 |
tpIPv6AclIdIPv6 ACL ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.1 |
tpIPv6RuleIdIPv6 ACL rule ID.ro INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.2 |
tpIPv6SecOperationIPv6 ACL Security Operation.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.1.5.1.3 |
tpIPv6TrafficClassTraffic Class DSCP, 0-64, value '64' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.4 |
tpIPv6FlowLabelIPv6 Flow Label, 0x0-0x100000, value '0x100000' or '1048576' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.5 |
tpIPv6SipAddressIPv6 source IP address, only upper 64 bits supported; the all-zero address means that the source IPv6 address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.5.1.6 |
tpIPv6SipMaskIPv6 source IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.5.1.7 |
tpIPv6DipAddressIPv6 destination IP address, only upper 64 bits supported; the all-zero address means that the destination IPv6 address is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.5.1.8 |
tpIPv6DipMaskIPv6 destination IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.5.1.9 |
tpIPv6SourcePortIPv6 L4 source port, 0-65536, value '65536' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.10 |
tpIPv6DestPortIPv6 L4 destination port, 0-65536, value '65536' means that this field is disabled.rw INTEGER .1.3.6.1.4.1.11863.6.26.1.1.5.1.11 |
tpIPv6TimeSegmentIPv6 ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.rw OCTET STRING .1.3.6.1.4.1.11863.6.26.1.1.5.1.12 |
tpIPv6RuleStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.1.5.1.13 |