TPLINK-ACL-MIB
AI MIB Summary
The TPLINK-ACL-MIB module enables the monitoring and management of Access Control List (ACL) configurations and rule states on TP-Link network devices via SNMP. It provides visibility into specific firewall policy elements, including rule identifiers, hit counts, and permit/deny actions to enforce network traffic filtering.
Private MIB for acl.
Main OID:
tplinkAclMIB.1.3.6.1.4.1.11863.6.26
37
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
tplinkAclMIBPrivate MIB for acl. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.26 |
tplinkAclMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.1 |
tpPolicyConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.1.2 |
tpPolicyTableA list of policy entries. Here you can add ACLs and create corresponding actions for the policy. SEQUENCE OF TPPOLICYENTRY .1.3.6.1.4.1.11863.6.26.1.2.1 |
tpPolicyEntryAn entry contains of the information of policy. TPPOLICYENTRY .1.3.6.1.4.1.11863.6.26.1.2.1.1 |
tpPolicyNamepolicy namero OCTET STRING .1.3.6.1.4.1.11863.6.26.1.2.1.1.1 |
tpAclIdthe aclId must be existentro INTEGER .1.3.6.1.4.1.11863.6.26.1.2.1.1.2 |
tpMirrorPortmirror the data packets in the policy to the specific port. if traffic mirror doesnt work, please set it to 0rw INTEGER .1.3.6.1.4.1.11863.6.26.1.2.1.1.3 |
tpConditionRatelimit the transmission rate of the data packets in the policy.(1-1000000Kbps), if traffic condition doesnt work, please set it to 0rw INTEGER .1.3.6.1.4.1.11863.6.26.1.2.1.1.4 |
tpIfExceedOperationSpecify the disposal way of the data packets those are transmitted beyond the rate. (you must set the conditionRate firstly)rw Enumeration .1.3.6.1.4.1.11863.6.26.1.2.1.1.5 |
tpRedirectPortForward the data packets those match the corresponding ACL to the specific port, if you want redirect to vlan, please set it to 0rw INTEGER .1.3.6.1.4.1.11863.6.26.1.2.1.1.6 |
tpQosRemarkDSCPSpecify the DSCP region for the data packets those match the corresponding ACL.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.2.1.1.7 |
tpQosRemarkLocalPriSpecify the local priority for the data packets those match the corresponding ACL.rw Enumeration .1.3.6.1.4.1.11863.6.26.1.2.1.1.8 |
tpPolicyStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.2.1.1.9 |
tpPolicyBindConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.1.3 |
tpPolicyBindPortTableA list of policy port binding entries. Here you can bind a policy to a port. SEQUENCE OF TPPOLICYBINDPORTENTRY .1.3.6.1.4.1.11863.6.26.1.3.1 |
tpPolicyBindPortEntryAn entry contains of the information of policy port binding. TPPOLICYBINDPORTENTRY .1.3.6.1.4.1.11863.6.26.1.3.1.1 |
tpBindPortPolicyNameThe name of the policy you want to bind.(the policy name must be existent)ro OCTET STRING .1.3.6.1.4.1.11863.6.26.1.3.1.1.1 |
tpPolicyPortThe port that the policy bind toro INTEGER .1.3.6.1.4.1.11863.6.26.1.3.1.1.2 |
tpPolicyBindPortStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.3.1.1.3 |
tpPolicyBindVlanTableA list of policy vlan binding entries. Here you can bind a policy to a VLAN. SEQUENCE OF TPPOLICYBINDVLANENTRY .1.3.6.1.4.1.11863.6.26.1.3.2 |
tpPolicyBindVlanEntryAn entry contains of the information of policy vlan binding. TPPOLICYBINDVLANENTRY .1.3.6.1.4.1.11863.6.26.1.3.2.1 |
tpBindVlanPolicyNameThe name of the policy you want to bind.(the policy name must be existent)ro OCTET STRING .1.3.6.1.4.1.11863.6.26.1.3.2.1.1 |
tpPolicyVlanthe vlan that the policy bind to, the vlan must be existentro INTEGER .1.3.6.1.4.1.11863.6.26.1.3.2.1.2 |
tpPolicyBindVlanStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.3.2.1.3 |
tpAclBindConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.1.4 |
tpAclBindPortTableA list of ACL port binding entries. Here you can bind a ACL to a port. SEQUENCE OF TPACLBINDPORTENTRY .1.3.6.1.4.1.11863.6.26.1.4.1 |
tpAclBindPortEntryAn entry contains of the information of ACL port binding. TPACLBINDPORTENTRY .1.3.6.1.4.1.11863.6.26.1.4.1.1 |
tpBindPortAclIdThe Id of the ACL you want to bind.(the ACL Id must be existent)ro OCTET STRING .1.3.6.1.4.1.11863.6.26.1.4.1.1.1 |
tpAclPortThe port that the ACL bind toro INTEGER .1.3.6.1.4.1.11863.6.26.1.4.1.1.2 |
tpAclBindPortStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.4.1.1.3 |
tpAclBindVlanTableA list of ACL vlan binding entries. Here you can bind a ACL to a VLAN. SEQUENCE OF TPACLBINDVLANENTRY .1.3.6.1.4.1.11863.6.26.1.4.2 |
tpAclBindVlanEntryAn entry contains of the information of ACL vlan binding. TPACLBINDVLANENTRY .1.3.6.1.4.1.11863.6.26.1.4.2.1 |
tpBindVlanAclIdThe Id of the ACL you want to bind.(the ACL Id must be existent)ro OCTET STRING .1.3.6.1.4.1.11863.6.26.1.4.2.1.1 |
tpAclVlanthe vlan that the ACL bind to, the vlan must be existentro INTEGER .1.3.6.1.4.1.11863.6.26.1.4.2.1.2 |
tpAclBindVlanStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.26.1.4.2.1.3 |
tplinkAclNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.26.2 |
More MIBs from Tplink
Browse all TplinkMIBs →TPLINK-IGMPSNOOPING-MIB
SNMP MIB module
86 objects→
TPLINK-LLDPMEDCONFIG-MIB
SNMP MIB module
84 objects→
TPLINK-ACL-RULE-MIB
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
78 objects→
TPLINK-DHCPSERVER-MIB
The TPLINK-DHCPSERVER-MIB enables monitoring and management of DHCP server operational parameters, including active lease counts, address pool utilization, and server state status, specifically on TP-Link network devices. This module facilitates the tracking of dynamic IP address assignment metrics and server availability to ensure reliable client connectivity within the network infrastructure.
77 objects→
TPLINK-MLDSNOOPING-MIB
SNMP MIB module
77 objects→
TPLINK-SPANNING-TREE-MIB
The TPLINK-SPANNING-TREE-MIB enables monitoring and management of Spanning Tree Protocol (STP) states, port roles, and bridge IDs on TP-Link network switches. This private module provides access to critical topology metrics such as root bridge election status, port forwarding states, and loop prevention alerts to ensure Layer 2 network stability.
76 objects→