TPLINK-STACK-MIB
The TPLINK-STACK-MIB module enables SNMP-based monitoring and management of physical stack topologies, member device status, and stack-wide configuration parameters on TP-Link network switches. It provides specific managed objects for tracking stack unit roles, link aggregation states, and hardware health metrics within a multi-chassis stacking environment.
Imported Objects
Objects
24 total| Object Name |
|---|
tplinkStackMIBThis MIB module contain a collection of managed objects
that apply to network devices with stack function. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.34 |
tplinkStackMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.34.1 |
tpStackGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.34.1.1 |
tpStackNameAn unique tag for the stack system.rw DisplayString .1.3.6.1.4.1.11863.6.34.1.1.1 |
tpStackMacAddressThe mac address the stack uses to communicate with other devices.ro DisplayString .1.3.6.1.4.1.11863.6.34.1.1.2 |
tpStackTopoThe current topo state of the stack.ro Enumeration .1.3.6.1.4.1.11863.6.34.1.1.3 |
tpStackAuthModeThe authentication mode used in stack creation.rw Enumeration .1.3.6.1.4.1.11863.6.34.1.1.4 |
tpStackAuthKeyThe password to be used in stack authentication if the
Stack Auth Mode is Simple or Md5.rw DisplayString .1.3.6.1.4.1.11863.6.34.1.1.5 |
tpStackInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.34.1.2 |
tpSwitchInfoTableThis table contains information specific to switches in a
stack. SEQUENCE OF TpSwitchInfoEntry .1.3.6.1.4.1.11863.6.34.1.2.1 |
tpSwitchInfoEntryA conceptual row in the switchInfoTable describing
a switch information. TpSwitchInfoEntry .1.3.6.1.4.1.11863.6.34.1.2.1.1 |
tpSwitchCurrentUnitThis object contains the current switch identification number.ro Enumeration .1.3.6.1.4.1.11863.6.34.1.2.1.1.1 |
tpSwitchDesignatedUnitThis object contains the preferred unit number for the switch.
auto:
When this option is selected, the device will be assigned
a free unit number automatically.
unit-x:
When this option is selected, the device will try to
obtain unit-x first,treated as auto when it is not available
to obtain a preffered unit number.rw Enumeration .1.3.6.1.4.1.11863.6.34.1.2.1.1.3 |
tpSwitchRoleThis object describes the function of the switch:
slave - stack member.
master - stack master.ro Enumeration .1.3.6.1.4.1.11863.6.34.1.2.1.1.4 |
tpSwitchPriorityA number containing the priority of a switch. The switch with
the highest priority will become the master.rw INTEGER .1.3.6.1.4.1.11863.6.34.1.2.1.1.5 |
tpSwitchMacAddressThe MAC address of the switch.ro DisplayString .1.3.6.1.4.1.11863.6.34.1.2.1.1.6 |
tpSwitchVersionThe software version of the switch.ro DisplayString .1.3.6.1.4.1.11863.6.34.1.2.1.1.7 |
tpSwitchStateThe current state of a switch:
init - The switch is initializing.
disc - The switch is discovering other switchs.
sync - The switch is now synchronizing config with other stack members.
ready - The switch is now ready.
verMismatch - The software version running on the
master is different with this member.ro Enumeration .1.3.6.1.4.1.11863.6.34.1.2.1.1.8 |
tpStackPortInfoTableThis table contains stackport specific information. There
exists an entry in this table for every physical stack
port that have an entry in the ifTable (IF-MIB). SEQUENCE OF TpStackPortInfoEntry .1.3.6.1.4.1.11863.6.34.1.2.2 |
tpStackPortInfoEntryA conceptual row in the stackPortInfoTable. An entry
contains information about a stackport. TpStackPortInfoEntry .1.3.6.1.4.1.11863.6.34.1.2.2.1 |
tpStackPortEnableWhether the port is enable as a stack port.
disable - Ethernet port mode.
enable - Stack port mode.rw Enumeration .1.3.6.1.4.1.11863.6.34.1.2.2.1.1 |
tpStackPortStatusThe state of the stackport.
ok - Connected and operational.
down - Link down.
authFail - The stack port is link-up but no discovery packets received or
malformed packet received.
ethernet - The port now works in Ethernet mode.ro Enumeration .1.3.6.1.4.1.11863.6.34.1.2.2.1.2 |
tpStackPortNeighborThe mac address of the switch directly links on the stack port.ro DisplayString .1.3.6.1.4.1.11863.6.34.1.2.2.1.3 |
tplinkStackNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.34.2 |
More MIBs from Tplink
Browse all TplinkMIBs →SNMP MIB module
SNMP MIB module
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
The TPLINK-DHCPSERVER-MIB enables monitoring and management of DHCP server operational parameters, including active lease counts, address pool utilization, and server state status, specifically on TP-Link network devices. This module facilitates the tracking of dynamic IP address assignment metrics and server availability to ensure reliable client connectivity within the network infrastructure.
SNMP MIB module
The TPLINK-SPANNING-TREE-MIB enables monitoring and management of Spanning Tree Protocol (STP) states, port roles, and bridge IDs on TP-Link network switches. This private module provides access to critical topology metrics such as root bridge election status, port forwarding states, and loop prevention alerts to ensure Layer 2 network stability.