TPLINK-QOS-MIB
Private MIB for system time configuration.
Main OID:
tplinkQosMIB.1.3.6.1.4.1.11863.6.22
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
tplinkQosMIBPrivate MIB for system time configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.22 |
IMPORTSPrivate MIB for system time configuration. Unknown .1.3.6.1.4.1.11863.6.22 |
tplinkQosMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.1 |
tplinkQosBasicConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.1.1 |
tpQosBasicConfigTableA list of qos basic config entries. Here you can configure the port priority. SEQUENCE OF TpQosBasicConfigEntry .1.3.6.1.4.1.11863.6.22.1.1.1 |
tpQosBasicConfigEntryAn entry contains of the information of qos basic config. TpQosBasicConfigEntry .1.3.6.1.4.1.11863.6.22.1.1.1.1 |
tpQosBasicConfigPortThe physical port number of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.22.1.1.1.1.1 |
tpQosBasicConfigPri0. Cos0
1. Cos1
2. Cos2
3. Cos3
4. Cos4
5. Cos5
6. Cos6
7. Cos7
Specify the priority for the port.rw Enumeration .1.3.6.1.4.1.11863.6.22.1.1.1.1.2 |
tpQosBasicConfigLagThe LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.22.1.1.1.1.3 |
tplinkQosScheduler OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.1.2 |
tpQosSchedulerConfigHere you can select the schedule mode for the switch.
0. SP-Mode: Strict-Priority Mode.
In this mode, the queue with higher priority will occupy the whole bandwidth.
Packets in the queue with lower priority are sent only when the queue with
higher priority is empty.
1. WRR-Mode: Weight Round Robin Mode.
In this mode, packets in all the queues are sent in order based on the weight
value for each queue.
You can also config the TC queues' weight with values 1-127.
2. SP+WRR-Mode: Strict-Priority + Weight Round Robin Mode.
In this mode, this switch provides two scheduling groups, SP group and WRR group.
Queues in SP group and WRR group are scheduled strictly based on strict-priority mode
while the queues inside WRR group follow the WRR mode.
In SP+WRR mode, the largest TC queue is in the SP group and the others belong to the WRR group and
You can also config the TC queues' weight with values 0-127, value 0 means this TC queue is in SP group.
In this way, when scheduling queues, the switch allows TC queues in SP group to occupy the whole bandwidth
following the SP mode and the other TC queues in the WRR group will take up the bandwidth according to their ratio.
3. Equ-Mode: Equal-Mode.
In this mode, all the queues occupy the bandwidth equally.rw Enumeration .1.3.6.1.4.1.11863.6.22.1.2.1 |
tpQosSchedulerWeightTableA table of the information of qos scheduler queue weight. SEQUENCE OF TpQosSchedulerWeightEntry .1.3.6.1.4.1.11863.6.22.1.2.2 |
tpQosSchedulerWeightEntryAn entry contains of the information of qos scheduler queue weight config. TpQosSchedulerWeightEntry .1.3.6.1.4.1.11863.6.22.1.2.2.1 |
tpQosSchedulerTcIndicates the priority level the packets go egress.
The priority levels are labeled as TC.ro Enumeration .1.3.6.1.4.1.11863.6.22.1.2.2.1.1 |
tpQosSchedulerWeightIndecates the egress queue weight value.
The value ranges from 0 to 127.rw INTEGER .1.3.6.1.4.1.11863.6.22.1.2.2.1.2 |
tplinkQos8021p OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.1.3 |
tpQos8021pTableA list of qos 8021p entries.
Here you can configure 802.1P Priority. SEQUENCE OF TpQos8021pEntry .1.3.6.1.4.1.11863.6.22.1.3.2 |
tpQos8021pEntryAn entry contains of the information of qos 8021p. TpQos8021pEntry .1.3.6.1.4.1.11863.6.22.1.3.2.1 |
tpQos8021pPriTagIndicates the precedence level defined by IEEE802.1P.ro INTEGER .1.3.6.1.4.1.11863.6.22.1.3.2.1.1 |
tpQos8021pPriLevelIndicates the priority level the packets with tag are mapped to.
The priority levels are labeled as TC.rw Enumeration .1.3.6.1.4.1.11863.6.22.1.3.2.1.2 |
tplinkQosDSCP OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.1.4 |
tpQosDSCPEnable0. disable
1. enable
Here you can enable or disable DSCP Priority.rw Enumeration .1.3.6.1.4.1.11863.6.22.1.4.1 |
tpQosDSCPTableA list of qos DSCP entries.
Here you can configure DSCP Priority. SEQUENCE OF TpQosDSCPEntry .1.3.6.1.4.1.11863.6.22.1.4.2 |
tpQosDSCPEntryAn entry contains of the information of qos DSCP. TpQosDSCPEntry .1.3.6.1.4.1.11863.6.22.1.4.2.1 |
tpQosDSCPPriTagIndicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.ro INTEGER .1.3.6.1.4.1.11863.6.22.1.4.2.1.1 |
tpQosDSCPPriLevelIndicates the priority level the packets with tag are mapped to.
The priority levels are labeled as cos0 - cos7.rw Enumeration .1.3.6.1.4.1.11863.6.22.1.4.2.1.2 |
tplinkQosNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.22.2 |