TPLINK-POWER-OVER-ETHERNET-MIB
AI MIB Summary
The TPLINK-POWER-ETHERNET-MIB enables monitoring and management of Power over Ethernet (PoE) status, including power allocation, port enablement, and consumption metrics, on TP-Link network switches. This private MIB facilitates granular control over PoE budgets and fault detection for connected powered devices within TP-Link managed infrastructure.
Private MIB for PoE module.
Main OID:
tplinkPowerOverEthernetMIB.1.3.6.1.4.1.11863.6.56
59
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
tpPoeRecoveryPortTableA list of PoE Auto Recovery entries. Here you can configure the PoE Auto Recovery feature on each port. SEQUENCE OF POERECOVERYPORTENTRY .1.1 |
tpPoeExtendPortTableA list of PoE Extend Mode entries. Here you can configure the PoE Extend Mode feature on each port. SEQUENCE OF POEEXTENDPORTENTRY .1.1 |
tpPoeRecoveryPortEntryAn entry contains of the poe auto recovery configuration and information of poe port. POERECOVERYPORTENTRY .1.1.1 |
tpPoeExtendPortEntryAn entry contains of the poe extend mode configuration and information of poe port. POEEXTENDPORTENTRY .1.1.1 |
tpPoeRecoveryPortThe port number of the Switch.ro INTEGER .1.1.1.1 |
tpPoeExtendPortThe port number of the Switch.ro INTEGER .1.1.1.1 |
tpPoeRecoveryIpDefines the ping IP address for the corresponding port. (Format: x.x.x.x)rw OCTET STRING .1.1.1.2 |
tpPoeExtendStatusSelect to disable/enable the PoE Extend Mode feature for the corresponding port.rw Enumeration .1.1.1.2 |
tpPoeRecoveryStartupDefines the startup delay for the corresponding port.(30-600 Seconds)rw INTEGER .1.1.1.3 |
tpPoeRecoveryIntervalDefines the ping interval for the corresponding port. (10-120 Seconds)rw INTEGER .1.1.1.4 |
tpPoeRecoveryRetryDefines the ping failure threshold for the corresponding port. (1-10)rw INTEGER .1.1.1.5 |
tpPoeRecoveryBreakDefines the break time for the corresponding port. (3-120 Seconds)rw INTEGER .1.1.1.6 |
tpPoeRecoveryStatusSelect to disable/enable the PoE Auto Recovery feature for the corresponding port.rw Enumeration .1.1.1.7 |
tpPoeRecoveryFailureDisplays the port's ping failures.ro INTEGER .1.1.1.8 |
tpPoeRecoveryRestartDisplays the port's restarts.ro INTEGER .1.1.1.9 |
tpPoeRecoveryTotalDisplays the port's total pings.ro INTEGER .1.1.1.10 |
tplinkPowerOverEthernetMIBPrivate MIB for PoE module. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.56 |
tplinkPoeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1 |
tpPoeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.1 |
tpPoeGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.1.1 |
tpSystemPowerLimitDefine max power the PoE switch supply. The unit is 0.1W.rw INTEGER .1.3.6.1.4.1.11863.6.56.1.1.1.1 |
tpPowerDisconnectMethodThe PoE Switch use this method to offset the power
limit being exceeded and keep the switch system using
power at a usable level.ro Enumeration .1.3.6.1.4.1.11863.6.56.1.1.1.2 |
tpSystemPowerConsumptionDisplay the PoE switch's real time system power consumption. The unit is 0.1W.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.1.3 |
tpSystemPowerRemainDisplay the PoE switch's real time remaining system power. The unit is 0.1W.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.1.4 |
tpPoePort OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.1.2 |
tpPoePortConfigTableA list of PoE entries.
Here you can configure the PoE feature on each port. SEQUENCE OF POEPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.56.1.1.2.1 |
tpPoePortConfigEntryAn entry contains of the configuration and information of poe port. POEPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.56.1.1.2.1.1 |
tpPoePortIndexThe port number of the Switch.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.1 |
tpPoePortStatusSelect to disable/enable the PoE feature
for the corresponding port. If set enable,
the corresponding port can supply power to
the linked PD (Powered Device).rw Enumeration .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.2 |
tpPoePriorityCooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.rw Enumeration .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.3 |
tpPoePowerLimitDefines the max power the corresponding port can supply.The unit is 0.1Wrw INTEGER .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.4 |
tpPoePortTimeRangeNameSelect time range by entering its name.rw OCTET STRING .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.5 |
tpPoePortProfileNameSelect profile by entering its name.rw OCTET STRING .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.6 |
tpPoePowerDisplays the port's real time power supply in 0.1W.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.7 |
tpPoeCurrentDisplays the port's real time current in 1mA.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.8 |
tpPoeVoltageDisplays the port's real time voltage in 0.1V.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.9 |
tpPoeClassDisplays the class the linked PD (Powered Device) belongs to.ro Enumeration .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.10 |
tpPoePowerStatusDisplays the port's real time power status.ro Enumeration .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.11 |
tpPoeProfile OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.2 |
tpPoeProfileTableA list of PoE profile entries.
Here you can define the PoE profile. SEQUENCE OF POEPROFILEENTRY .1.3.6.1.4.1.11863.6.56.1.2.1 |
tpPoeProfileEntryAn entry contains of the information of PoE profile. POEPROFILEENTRY .1.3.6.1.4.1.11863.6.56.1.2.1.1 |
tpPoeProfileIndexThe index number of the Switch.ro INTEGER .1.3.6.1.4.1.11863.6.56.1.2.1.1.1 |
tpPoeProfileNamethe name of PoE profile.ro OCTET STRING .1.3.6.1.4.1.11863.6.56.1.2.1.1.2 |
tpPoeProfilePortStatusSelect to disable/enable the PoE feature
for the corresponding profile. If set enable,
the port selected the profile can supply power to
the linked PD (Powered Device).rw Enumeration .1.3.6.1.4.1.11863.6.56.1.2.1.1.3 |
tpPoeProfilePriorityCooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.rw Enumeration .1.3.6.1.4.1.11863.6.56.1.2.1.1.4 |
tpPoeProfilePowerLimitDefines the max power the corresponding port can supply.The unit is 0.1W.rw INTEGER .1.3.6.1.4.1.11863.6.56.1.2.1.1.5 |
tpPoeProfileStatusrw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.56.1.2.1.1.6 |
tpPoeRecovery OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.3 |
tpPoeRecoveryGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.3.1 |
tpPoeRecoveryGlobalStatusEnable the PoE Auto Recovery function.rw Enumeration .1.3.6.1.4.1.11863.6.56.1.3.1.1 |
tpPoeExtend OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.1.4 |
tplinkPoeNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.56.2 |
tpPoePortPowerChangeA poePortPowerChange notification is sent when the status of a port power changes. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.1 |
tpPoePortPowerOverLoadingA poePortPowerOverLoading notification is sent when a port is over loading. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.2 |
tpPoePortShortCircuitA poePortShortCircuit notification is sent when short circuit occurs on a port. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.3 |
tpPoePortPowerOver30WattsA poePortPowerOver30Watts notification is sent when a port's consumption is over 30W. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.4 |
tpPoePortPowerDenyA poePowerDeny notification is sent when a port's power supply is denied. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.5 |
tpPoeThermalShutdownA poeThermalShutdown notification is sent when the power supply shutdown occurs because temperature is too high. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.6 |
tpPoeOverMaxPowerBudgetA poeOverMaxPowerBudget notification is sent when the total power is over the budget. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.56.2.7 |