TPLINK-PORTMIRROR-MIB
AI MIB Summary
The TPLINK-PORTMIRROR-MIB module enables configuration and monitoring of port mirroring (SPAN) sessions on TP-Link managed switches to redirect traffic from source ports to a designated monitoring port for packet analysis. It manages specific metrics including source and destination port assignments, mirroring direction, and session operational status.
The config of the port mirror.
Main OID:
tplinkPortMirrorMIB.1.3.6.1.4.1.11863.6.11
11
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
tplinkPortMirrorMIBThe config of the port mirror. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.11 |
tplinkPortMirrorMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.11.1 |
tpPortMirrorTable SEQUENCE OF TPPORTMIRRORENTRY .1.3.6.1.4.1.11863.6.11.1.1 |
tpPortMirrorEntry TPPORTMIRRORENTRY .1.3.6.1.4.1.11863.6.11.1.1.1 |
tpPortMirrorSessionThis object indicates the session number of the mirror group.ro INTEGER .1.3.6.1.4.1.11863.6.11.1.1.1.1 |
tpPortMirrorDestinationThis object indicates a destination port which monitors specified ports on the switch, should be given as 1/0/1. Note: The member of LAG cannot be assigned as a destination port.rw OCTET STRING .1.3.6.1.4.1.11863.6.11.1.1.1.2 |
tpPortMirrorIngressSourceThis object indicates a list of the source ports. Any packets received from these ports will be copyed to the assigned destination port. This should be given as 1/0/1,1/0/2-12. Note: The ports in other sessions and destination port can't add to this list.rw OCTET STRING .1.3.6.1.4.1.11863.6.11.1.1.1.3 |
tpPortMirrorEgressSourceThis object indicates a list of the source ports. Any packets sended out from these ports will be copyed to the assigned destination ports.This should be given as 1/0/1,1/0/2-12. Note: The ports in other sessions and destination port can't add to this list.rw OCTET STRING .1.3.6.1.4.1.11863.6.11.1.1.1.4 |
tpPortMirrorBothSourceThis object indicates a list of the source ports. Any packets received or sended out from these ports will be copyed to the assigned destination ports.This should be given as 1/0/1,1/0/2-12. Note: The ports in other sessions and destination port can't add to this list.rw OCTET STRING .1.3.6.1.4.1.11863.6.11.1.1.1.5 |
tpPortMirrorSessionStateThis object indicates the state of mirror session.If a session has been assigned both destination port and source ports, then the value of this object changes to active(2). Otherwise the value of this object is to be negative(1). When the value of this object is assigned to clear(3), then the configuration of this session will be cleared, and the state changes to negative(1). Be aware of that only clear(3) can be assigned to this object.rw Enumeration .1.3.6.1.4.1.11863.6.11.1.1.1.6 |
tplinkPortMirrorMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.11.2 |