TPLINK-PORTCONFIG-MIB
Imported Objects
Objects
13 total| Object Name |
|---|
tplinkPortConfigMIBThis MIB module contain a collection of managed objects
for port configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.8 |
IMPORTSThis MIB module contain a collection of managed objects
for port configuration. Unknown .1.3.6.1.4.1.11863.6.8 |
tplinkPortConfigMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.8.1 |
tpPortConfigTableA table that contains information about every port. You can
configure the basic parameters for the ports. The parameters
will affect the working mode of the port, please set the
parameters appropriate to your needs. SEQUENCE OF TpPortConfigEntry .1.3.6.1.4.1.11863.6.8.1.1 |
tpPortConfigEntryA list of information for each port of the device. TpPortConfigEntry .1.3.6.1.4.1.11863.6.8.1.1.1 |
tpPortConfigDescriptionThis object indicate the description of the port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.8.1.1.1.2 |
tpPortConfigStatusThis object indicates the link status of the port. When enable
is selected, the port can forward the packets normall.rw Enumeration .1.3.6.1.4.1.11863.6.8.1.1.1.3 |
tpPortConfigSpeedThis object indicates the speed and duplex mode of the port.
The device connected to the switch should be in the same Speed
and Duplex mode with the switch. When auto is selected, the
Speed and Duplex mode will be determined by auto negotiation.rw Enumeration .1.3.6.1.4.1.11863.6.8.1.1.1.4 |
tpPortConfigDuplexThis object indicates the speed and duplex mode of the port.
The device connected to the switch should be in the same Speed
and Duplex mode with the switch. When auto is selected, the
Speed and Duplex mode will be determined by auto negotiation.rw Enumeration .1.3.6.1.4.1.11863.6.8.1.1.1.5 |
tpPortConfigFlowCtrlThis object indicates the port status of the flow control. When
Flow Control is enabled, the switch can synchronize the speed
with its peer to avoid the packet loss caused by congestion.rw Enumeration .1.3.6.1.4.1.11863.6.8.1.1.1.6 |
tpPortConfigJumboThis object indicates the port status of the jumbo.
The default maximum transmission unit (MTU) size is 1518 bytes.
When Jumbo is enabled, the MTU size is 9216 bytes.rw Enumeration .1.3.6.1.4.1.11863.6.8.1.1.1.7 |
tpPortConfigLAGThis object indicates the lag number of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.8.1.1.1.8 |
tplinkPortConfigNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.8.2 |
More MIBs from Tplink
Browse all TplinkMIBs →SNMP MIB module
SNMP MIB module
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
The TPLINK-DHCPSERVER-MIB enables monitoring and management of DHCP server operational parameters, including active lease counts, address pool utilization, and server state status, specifically on TP-Link network devices. This module facilitates the tracking of dynamic IP address assignment metrics and server availability to ensure reliable client connectivity within the network infrastructure.
SNMP MIB module
The TPLINK-SPANNING-TREE-MIB enables monitoring and management of Spanning Tree Protocol (STP) states, port roles, and bridge IDs on TP-Link network switches. This private module provides access to critical topology metrics such as root bridge election status, port forwarding states, and loop prevention alerts to ensure Layer 2 network stability.