TPLINK-PIM-MIB
AI MIB Summary
The TPLINK-PIM-MIB module enables SNMP-based configuration and monitoring of Protocol Independent Multicast (PIM) parameters on TP-Link networking devices, specifically exposing metrics such as PIM neighbor states, interface operational status, and multicast routing table entries.
Private MIB for PIM configuration.
Main OID:
tplinkPimMIB.1.3.6.1.4.1.11863.6.77
52
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
tplinkPimMIBPrivate MIB for PIM configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.77 |
tplinkPimMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.77.1 |
tpPim OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.77.1.1 |
tpSGExpiryTimerSpecify the expiry timer for the entry.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.1 |
tpPimdataThresholdRateSelect rate which the last-hop router will switch to a source-specific shortest path tree. Specify infinity if you want all sources for the specified group to use the shared tree, never switching to the source tree.The default is 0 kbps.rw Enumeration .1.3.6.1.4.1.11863.6.77.1.1.2 |
tpPimInterfaceTableThe (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. SEQUENCE OF TpPimInterfaceEntry .1.3.6.1.4.1.11863.6.77.1.1.3 |
tpPimInterfaceEntryAn entry (conceptual row) in the pimInterfaceTable. TpPimInterfaceEntry .1.3.6.1.4.1.11863.6.77.1.1.3.1 |
tpPimInterfaceDisplay the interface which you can configure.ro OCTET STRING .1.3.6.1.4.1.11863.6.77.1.1.3.1.1 |
tpPimInterfaceIndexThe Index value of this PIM interface.ro Integer32 .1.3.6.1.4.1.11863.6.77.1.1.3.1.2 |
tpPimInterfaceTypeThe configured type of this interface.ro Enumeration .1.3.6.1.4.1.11863.6.77.1.1.3.1.3 |
tpPimInterfaceAddressThe IP address of the PIM interface.ro IpAddress .1.3.6.1.4.1.11863.6.77.1.1.3.1.4 |
tpPimInterfaceNetMaskThe network mask for the IP address of the PIM interface.ro IpAddress .1.3.6.1.4.1.11863.6.77.1.1.3.1.5 |
tpPimInterfaceModeThe configured mode of this PIM interface.rw Enumeration .1.3.6.1.4.1.11863.6.77.1.1.3.1.6 |
tpPimInterfaceDRPriorityThe Designated Router Priority value inserted into the DR Priority option on this interface.Numerically higher values for this object indicate higher priorities.rw INTEGER .1.3.6.1.4.1.11863.6.77.1.1.3.1.7 |
tpPimInterfaceDRAddressThe Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0.ro IpAddress .1.3.6.1.4.1.11863.6.77.1.1.3.1.8 |
tpPimInterfaceHelloIntervalThe frequency at which PIM Hello messages are transmitted on this interface.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.3.1.9 |
tpPimInterfaceBsrBorderThe frequency at which PIM Hello messages are transmitted on this interface.rw Enumeration .1.3.6.1.4.1.11863.6.77.1.1.3.1.10 |
tpPimInterfaceJoinPruneIntervalThe frequency at which PIM Join/Prune messages are transmitted on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification [I-D.ietf-pim-sm-v2-new]. A value of 0 represents an 'infinite' interval, and indicates that periodic PIM Join/Prune messages should not be sent on this interface.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.3.1.11 |
tpPimNeighborTableThe (conceptual) table listing the router's PIM neighbors. SEQUENCE OF TpPimNeighborEntry .1.3.6.1.4.1.11863.6.77.1.1.4 |
tpPimNeighborEntryAn entry (conceptual row) in the pimNeighborTable. TpPimNeighborEntry .1.3.6.1.4.1.11863.6.77.1.1.4.1 |
tpPimNeighborInterfaceThe interface used to reach this PIM neighbor.ro OCTET STRING .1.3.6.1.4.1.11863.6.77.1.1.4.1.1 |
tpPimNeighborInterfaceIndexThe value of ifIndex for the interface used to reach this PIM neighbor.ro Integer32 .1.3.6.1.4.1.11863.6.77.1.1.4.1.2 |
tpPimNeighborAddressThe IP address of the PIM neighbor for which this entry contains information.ro IpAddress .1.3.6.1.4.1.11863.6.77.1.1.4.1.3 |
tpPimNeighborUpTimeThe time since this PIM neighbor (last) became a neighbor of the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11863.6.77.1.1.4.1.4 |
tpPimNeighborExpiryTimeThe minimum time remaining before this PIM neighbor will be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11863.6.77.1.1.4.1.5 |
tpPimNeighborModeThe active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface.rodeprecated Enumeration .1.3.6.1.4.1.11863.6.77.1.1.4.1.6 |
tpPimCandidateBSRSet OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.77.1.1.5 |
tpPimCBSRInterfaceSpecify the interface of the BSR.ro OCTET STRING .1.3.6.1.4.1.11863.6.77.1.1.5.1 |
tpPimCBSRInterfaceIndexSpecify the interface index of the BSR.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.5.2 |
tpPimCBSRHashMaskLengthSpecify the hash mask length of the BSR. The default value is 30.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.5.3 |
tpPimCBSRPrioritySpecify the priority of the BSR. The default value is 64.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.5.4 |
tpPimStaticRpSet OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.77.1.1.6 |
tpPimStaticRpAddressSpecify the static RP address.rw IpAddress .1.3.6.1.4.1.11863.6.77.1.1.6.1 |
tpPimStaticRpOverrideSelect to enable or disable override mode. If the override mode is enabled, the static RP will take effect no matter the candidate RP is configured or not. Otherwise the static RP will be invalid when the candidate RP is configured.rw Enumeration .1.3.6.1.4.1.11863.6.77.1.1.6.2 |
tpPimCandidateRPSetTableThe (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages. SEQUENCE OF TpPimCandidateRPSetEntry .1.3.6.1.4.1.11863.6.77.1.1.7 |
tpPimCandidateRPSetEntryAn entry (conceptual row) in the pimRPSetTable. TpPimCandidateRPSetEntry .1.3.6.1.4.1.11863.6.77.1.1.7.1 |
tpPimCRPSetInterfaceThe c rp interface.ro OCTET STRING .1.3.6.1.4.1.11863.6.77.1.1.7.1.1 |
tpPimCRPSetInterfaceIndexThe ifIndex value of this c rp interface.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.7.1.2 |
tpPimCRPSetInterfaceTypeThe interface type.rodeprecated Enumeration .1.3.6.1.4.1.11863.6.77.1.1.7.1.3 |
tpPimCRPSetPrioritySpecify the priority of the candidate RP. The default value is 192.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.7.1.4 |
tpPimCRPSetInterValSpecify the interval of advertisement message of the candidate RP in seconds. The default value is 60.rw Integer32 .1.3.6.1.4.1.11863.6.77.1.1.7.1.5 |
tpPimCRPSetNextAdvertisementTimeShow the remain time of next RP advertisement packet send.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11863.6.77.1.1.7.1.6 |
tpPimCRPSetInterfaceStatusThe interface type.rwdeprecated Enumeration .1.3.6.1.4.1.11863.6.77.1.1.7.1.7 |
tpPimRPMappingTableShow the RP mapping information.deprecated SEQUENCE OF TpPimRPMappingEntry .1.3.6.1.4.1.11863.6.77.1.1.8 |
tpPimRPMappingEntryAn entry (conceptual row) in the tpPimRPMappingTable. There is one entry per RP address for each IP multicast group.deprecated TpPimRPMappingEntry .1.3.6.1.4.1.11863.6.77.1.1.8.1 |
tpPimRPGroupAddressThe IP multicast group address for which this entry contains information about an RP.rodeprecated IpAddress .1.3.6.1.4.1.11863.6.77.1.1.8.1.1 |
tpPimRPAddressThe IP multicast group address for which this entry contains PIM version 1 information about an RP.rodeprecated IpAddress .1.3.6.1.4.1.11863.6.77.1.1.8.1.2 |
tpPimRPInfoSourceThe state of the RP.rodeprecated IpAddress .1.3.6.1.4.1.11863.6.77.1.1.8.1.3 |
tpPimRPPriorityShow the priority of the RP.rodeprecated INTEGER .1.3.6.1.4.1.11863.6.77.1.1.8.1.4 |
tpPimRPHoldTimeShow the holdtime of the RP.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11863.6.77.1.1.8.1.5 |
tpPimRPExpireShow the expiry time of the RP. If RP is static, the expiry time will be Never.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11863.6.77.1.1.8.1.6 |
tplinkPimNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.77.2 |