TPLINK-LAG-MIB
AI MIB Summary
The TPLINK-LAG-MIB module enables management of Link Aggregation Group (LAG) configurations and status monitoring on TP-Link network switches. It exposes metrics for aggregated interface states, member port operational status, and load-balancing parameters to facilitate high-availability link management.
Private MIB for system time configuration.
Main OID:
tplinkLagMIB.1.3.6.1.4.1.11863.6.9
23
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
tplinkLagMIBPrivate MIB for system time configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.9 |
IMPORTSPrivate MIB for system time configuration. Unknown .1.3.6.1.4.1.11863.6.9 |
tplinkLagMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.9.1 |
tplinkLagMIBGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.9.1.1 |
tpLagMaxEntryNumThis object indicates the max number of entries in the lag
configuration table.ro INTEGER .1.3.6.1.4.1.11863.6.9.1.1.1 |
tpLagLoadBalanceThis object configures scope of Aggregate Arithmetic, which
results in choosing a port to transfer the packets.
mac-source-dest: When this option is selected, the Aggregate
Arithmetic will apply to the source and destination MAC addresses
of the packets.
ip-source-dest: When this option is selected, the Aggregate
Arithmetic will apply to the source and destination IP addresses
of the packets.rw Enumeration .1.3.6.1.4.1.11863.6.9.1.1.2 |
tplinkLagTable OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.9.1.2 |
tpLagTableA table that contains informatin about every static lag.
LAG (Link Aggregation Group) is to combine a number of ports
together to make a single high-bandwidth data path, which can
highly extend the bandwidth. The bandwidth of the LAG is the
sum of bandwidth of its member port. SEQUENCE OF TPLAGENTRY .1.3.6.1.4.1.11863.6.9.1.2.3 |
tpLagEntryA list of information for every lag. TPLAGENTRY .1.3.6.1.4.1.11863.6.9.1.2.3.1 |
tpLagIndexThis object indicates the index of the lag entry.ro INTEGER .1.3.6.1.4.1.11863.6.9.1.2.3.1.1 |
tpLagTypeThis object indicates the type of the lag entry.rw Enumeration .1.3.6.1.4.1.11863.6.9.1.2.3.1.2 |
tpLagMemberThis object indicates how many ports are included in this lag.
The maximum number of ports is eight for 'on' type lag,
sixteen for 'active' or 'passive' type lag.rw DisplayString .1.3.6.1.4.1.11863.6.9.1.2.3.1.3 |
tpLagRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11863.6.9.1.2.3.1.4 |
tplinkLagLacpManage OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.9.1.3 |
tpLacpSystemPriorityThis object indicates the system priority of the lacp.rw INTEGER .1.3.6.1.4.1.11863.6.9.1.3.1 |
tpLacpTableA table that contains the lacp information of every port.
LACP (Link Aggregation Control Protocol) is defined in IEEE802.3ad and
enables the dynamic link aggregation and disaggregation by exchanging
LACP packets with its partner. The switch can dynamically group similarly
configured ports into a single logical link, which will highly extend the
bandwidth and flexibly balance the load. SEQUENCE OF TPLACPENTRY .1.3.6.1.4.1.11863.6.9.1.3.2 |
tpLacpEntryA list of lacp information for every port. TPLACPENTRY .1.3.6.1.4.1.11863.6.9.1.3.2.1 |
tpLacpPortThis object indicates the port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.9.1.3.2.1.1 |
tpLacpAdminKeyThis object indicates the Admin Key of the port. The member ports
in a dynamic aggregation group must have the same Admin Key.ro INTEGER .1.3.6.1.4.1.11863.6.9.1.3.2.1.2 |
tpLacpPortPriorityThis object indicates the port priority of the port. This value
determines the priority of the port to be selected as the dynamic
aggregation group member. The port with smaller Port Priority will
be considered as the preferred one. If the two port priorities are
equal; the port with smaller port number is preferred.rw INTEGER .1.3.6.1.4.1.11863.6.9.1.3.2.1.3 |
tpLacpModeThis object indicates the lacp mode of the port.ro Enumeration .1.3.6.1.4.1.11863.6.9.1.3.2.1.4 |
tpLacpChanThis object indicates the lag number of the port.ro DisplayString .1.3.6.1.4.1.11863.6.9.1.3.2.1.5 |
tplinkLagNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.9.2 |