TPLINK-IPV6STATICROUTE-MIB
The TPLINK-IPV6STATICROUTE-MIB enables SNMP-based management of IPv6 static routing tables on TP-Link network devices, specifically exposing configuration parameters such as destination prefixes, next-hop addresses, and outgoing interface identifiers. This module facilitates the programmatic retrieval and modification of static route entries to maintain deterministic IPv6 path selection across the enterprise infrastructure.
Imported Objects
Objects
11 total| Object Name |
|---|
tplinkIPv6StaticRouteMIBPrivate MIB for IPv6 static route configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.53 |
tplinkIPv6StaticRouteMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.53.1 |
tpIPv6StaticRouteConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.53.1.1 |
tpIPv6StaticRouteConfigTableA list of static route entries.Route is choosing a best way to trasmit the data from the source to the destination.Static route is a special route,it is set by the administrator,and it is not automatically changed along with the change of network topo, so the static route is most used in the net which is small and has a fixed topo with virtues of simple,efficient and reliable. SEQUENCE OF STATICITEMCTRLENTRY .1.3.6.1.4.1.11863.6.53.1.1.1 |
tpIPv6StaticRouteConfigEntryThe item can be added or removed . STATICITEMCTRLENTRY .1.3.6.1.4.1.11863.6.53.1.1.1.1 |
tpIPv6StaticRouteItemDesIpThe ip Address of the packet should be arrivedro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11863.6.53.1.1.1.1.1 |
tpIPv6StaticRouteItemPrefixLenThe mask of the ip.ro INTEGER .1.3.6.1.4.1.11863.6.53.1.1.1.1.2 |
tpIPv6StaticRouteItemNexthopThe next jump ip address which the packet would be sent to by the switch.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11863.6.53.1.1.1.1.3 |
tpIPv6StaticRouteItemInterfaceNameThe name of the VLAN interface.ro OCTET STRING .1.3.6.1.4.1.11863.6.53.1.1.1.1.4 |
tpIPv6StaticRouteItemStatusThe following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.53.1.1.1.1.5 |
tplinkIPv6StaticRouteNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.53.2 |
More MIBs from Tplink
Browse all TplinkMIBs →SNMP MIB module
SNMP MIB module
Standard SNMP MIB module defining data structures for TPLINK-ACL-RULE-MIB.
The TPLINK-DHCPSERVER-MIB enables monitoring and management of DHCP server operational parameters, including active lease counts, address pool utilization, and server state status, specifically on TP-Link network devices. This module facilitates the tracking of dynamic IP address assignment metrics and server availability to ensure reliable client connectivity within the network infrastructure.
SNMP MIB module
The TPLINK-SPANNING-TREE-MIB enables monitoring and management of Spanning Tree Protocol (STP) states, port roles, and bridge IDs on TP-Link network switches. This private module provides access to critical topology metrics such as root bridge election status, port forwarding states, and loop prevention alerts to ensure Layer 2 network stability.