TPLINK-IPV6ADDR-MIB
AI MIB Summary
The TPLINK-IPV6ADDR-MIB module enables SNMP-based monitoring and configuration of IPv6 address assignments, interface states, and prefix information on TP-Link networking hardware. It provides specific access to IPv6 address table entries, including link-local and global unicast addresses, for automated network management and troubleshooting.
Private MIB for IPv6 address configuration.
Main OID:
tplinkIpv6AddrMIB.1.3.6.1.4.1.11863.6.50
11
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
tplinkIpv6AddrMIBPrivate MIB for IPv6 address configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.50 |
tplinkIpv6AddrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.50.1 |
ipv6ParaConfigAddrTableThe table of address information is relevant to the switch's IPv6 addresses. SEQUENCE OF Ipv6ParaConfigAddrEntry .1.3.6.1.4.1.11863.6.50.1.1 |
ipv6ParaConfigAddrEntryDefine the IPv6 address information. Ipv6ParaConfigAddrEntry .1.3.6.1.4.1.11863.6.50.1.1.1 |
ipv6ParaConfigIfIndexThe IfIndex of the interfacero INTEGER .1.3.6.1.4.1.11863.6.50.1.1.1.2 |
ipv6ParaConfigAddrTypeThe IP address type of the switch. The value must be ipv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11863.6.50.1.1.1.3 |
ipv6ParaConfigAddressThe IPv6 address of the switch.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11863.6.50.1.1.1.4 |
ipv6ParaConfigPrefixLengthThe length of the prefix (in bits) associated with the IPv6 address of the switch.rw INTEGER .1.3.6.1.4.1.11863.6.50.1.1.1.5 |
ipv6ParaConfigSourceTypeIndicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned global/site-local IPv6 address; 'assignedEUI64Ip': Assigned global/site-local IPv6 address by using EUI-64 interface identifier; 'assignedLinklocalIp': Assigned link-local IPv6 address. 'autoIp': Auto generated IPv6 address as a result of non-linklocal anycast/unicast address configuration; 'dhcpv6': Assigned IPv6 address through DHCPv6 protocol; 'negotiate': Assigned IPv6 address through negotiation;ro Enumeration .1.3.6.1.4.1.11863.6.50.1.1.1.6 |
ipv6ParaConfigRowStatusthe following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry. When you create a new user,the default password is admin.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11863.6.50.1.1.1.7 |
tplinkIpv6AddrNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.50.2 |