TPLINK-GVRP-MIB
GVRP (GARP VLAN registration protocol) is an implementation of GARP (generic attribute registration protocol). GVRP allows the switch to automatically add or remove the VLANs via the dynamic VLAN registration information and propagate the local VLAN registration information to other switches, without having to individually configure each VLAN.
Main OID:
tplinkGvrpMIB.1.3.6.1.4.1.11863.6.20
16
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
tplinkGvrpMIBGVRP (GARP VLAN registration protocol) is an implementation of GARP
(generic attribute registration protocol). GVRP allows the switch to
automatically add or remove the VLANs via the dynamic VLAN registration
information and propagate the local VLAN registration information to
other switches, without having to individually configure each VLAN. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.20 |
IMPORTSGVRP (GARP VLAN registration protocol) is an implementation of GARP
(generic attribute registration protocol). GVRP allows the switch to
automatically add or remove the VLANs via the dynamic VLAN registration
information and propagate the local VLAN registration information to
other switches, without having to individually configure each VLAN. Unknown .1.3.6.1.4.1.11863.6.20 |
tplinkGvrpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.20.1 |
tpGvrpGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.20.1.1 |
tpGvrpGlobalEnableAllows you to Enable/Disable the GVRP function.
0. disable
1. enablerw Enumeration .1.3.6.1.4.1.11863.6.20.1.1.1 |
tpGvrpPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.20.1.2 |
tpGvrpPortTableHere you can set the GVRP parameters for each port. SEQUENCE OF TPGVRPPORTENTRY .1.3.6.1.4.1.11863.6.20.1.2.1 |
tpGvrpPortEntryAn entry contains of the information of a port. TPGVRPPORTENTRY .1.3.6.1.4.1.11863.6.20.1.2.1.1 |
tpGvrpPortNumberDisplays the port number.ro OCTET STRING .1.3.6.1.4.1.11863.6.20.1.2.1.1.1 |
tpGvrpPortEnableEnable/Disable the GVRP feature for the port. The port type
should be set to TRUNK before enabling the GVRP feature.
0. Disable
1. Enablerw Enumeration .1.3.6.1.4.1.11863.6.20.1.2.1.1.2 |
tpGvrpPortRegistrationSelect the Registration Mode for the port.
0. NORMAL:In this mode, a port can dynamically register/deregister
a VLAN and propagate the dynamic/static VLAN information.
1. FIXED:In this mode, a port cannot register/deregister a VLAN
dynamically. It only propagates static VLAN information.
2. FORBIDDEN:In this mode, a port cannot register/deregister VLANs.
It only propagates VLAN 1 information.rw Enumeration .1.3.6.1.4.1.11863.6.20.1.2.1.1.3 |
tpGvrpLeaveAllTimerOnce the LeaveAll Timer is set, the port with GVRP enabled
can send a LeaveAll message after the timer times out, so
that other GARP ports can re-register all the attribute information.
After that, the LeaveAll timer will start to begin a new cycle.
The LeaveAll Timer ranges from 1000 to 30000 centiseconds and could
be devided exactly by 5.rw INTEGER .1.3.6.1.4.1.11863.6.20.1.2.1.1.4 |
tpGvrpJoinTimerTo guarantee the transmission of the Join messages, a GARP
port sends each Join message two times. The Join Timer is
used to define the interval between the two sending operations
of each Join message. The Join Timer ranges from 20 to 1000
centiseconds and could be devided exactly by 5.rw INTEGER .1.3.6.1.4.1.11863.6.20.1.2.1.1.5 |
tpGvrpLeaveTimerOnce the Leave Timer is set, the GARP port receiving a
Leave message will start its Leave timer, and unregister
the attribute information if it does not receive a Join
message again before the timer times out. The Leave Timer
ranges from 60 to 3000 centiseconds and could be devided
exactly by 5.
(leave timer)*10 <= leaveAll timer,
(join timer)*2 <= leave timer.rw INTEGER .1.3.6.1.4.1.11863.6.20.1.2.1.1.6 |
tpGvrpPortLagDisplays the LAG to which the port belongs.ro OCTET STRING .1.3.6.1.4.1.11863.6.20.1.2.1.1.7 |
tplinkGvrpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.20.2 |