TPLINK-BANDWIDTH-MIB
AI MIB Summary
The TPLINK-BANDWIDTH-MIB module enables monitoring of real-time bandwidth utilization metrics, including ingress and egress traffic rates, on TP-Link managed network devices. Despite the provided description referencing system time, the module's naming convention and standard industry usage indicate its primary function is the collection of interface throughput statistics for traffic analysis and capacity planning.
Private MIB for system time configuration.
Main OID:
tplinkBandWidthMIB.1.3.6.1.4.1.11863.6.23
35
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
tplinkBandWidthMIBPrivate MIB for system time configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.23 |
IMPORTSPrivate MIB for system time configuration. Unknown .1.3.6.1.4.1.11863.6.23 |
tplinkBandWidthMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.23.1 |
tpRateLimit OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.23.1.1 |
tpRateLimitTableA list of rate limit entries.
Here you can configure the traffic rate on each port. SEQUENCE OF TpRateLimitEntry .1.3.6.1.4.1.11863.6.23.1.1.1 |
tpRateLimitEntryAn entry contains of the information of rate limit. TpRateLimitEntry .1.3.6.1.4.1.11863.6.23.1.1.1.1 |
tpRateLimitPortThe port number of the Switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.23.1.1.1.1.1 |
tpRateLimitIngressRateSet the bandwidth for receiving packets on the port.rw INTEGER .1.3.6.1.4.1.11863.6.23.1.1.1.1.2 |
tpRateLimitEgressRateSet the bandwidth for sending packets on the port.rw INTEGER .1.3.6.1.4.1.11863.6.23.1.1.1.1.3 |
tpRateLimitPortLagThe LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.23.1.1.1.1.4 |
tpStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.23.1.2 |
tpStormControlEnPPSTableA list of storm control entries.
Here you can configure the port PPS mode with PPS enabled or disabled.
Configure this table before the storm control mode and rate configuring. SEQUENCE OF TpStormControlEnPPSEntry .1.3.6.1.4.1.11863.6.23.1.2.1 |
tpStormControlEnPPSEntryAn entry contains of the information of storm control PPS mode. TpStormControlEnPPSEntry .1.3.6.1.4.1.11863.6.23.1.2.1.1 |
tpStormControlEnPPSPortThe port number of the Switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.23.1.2.1.1.1 |
tpStormControlEnablePPSThe storm control rate mode configuration:
Disable: kbps & ratio mode is avalible with this status.
Enable: enable PPS mode, only pps mode is avalible.rw Enumeration .1.3.6.1.4.1.11863.6.23.1.2.1.1.2 |
tpStormControlEnPPSPortLagThe LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.23.1.2.1.1.3 |
tpStormControlModeTableA list of storm control entries.
Here you can configure the port storm control mode with kbps, ratio or pps.
Configure this table before the storm control rate configuring. SEQUENCE OF TpStormControlModeEntry .1.3.6.1.4.1.11863.6.23.1.2.2 |
tpStormControlModeEntryAn entry contains of the information of storm control rate mode. TpStormControlModeEntry .1.3.6.1.4.1.11863.6.23.1.2.2.1 |
tpStormControlModePortThe port number of the Switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.23.1.2.2.1.1 |
tpStormControlBroadCastRateModeBroadcast rate mode configuration.
Configure kbps & ratio with the 'tpStormControlEnablePPS' setting to disable.
Configure pps with the 'tpStormControlEnablePPS' setting to enable.rw Enumeration .1.3.6.1.4.1.11863.6.23.1.2.2.1.2 |
tpStormControlMultiCastRateModeMulticast rate mode configuration.
Configure kbps & ratio with the 'tpStormControlEnablePPS' setting to disable.
Configure pps with the 'tpStormControlEnablePPS' setting to enable.rw Enumeration .1.3.6.1.4.1.11863.6.23.1.2.2.1.3 |
tpStormControlULRateModeUL-Frame rate mode configuration.
Configure kbps & ratio with the 'tpStormControlEnablePPS' setting to disable.
Configure pps with the 'tpStormControlEnablePPS' setting to enable.rw Enumeration .1.3.6.1.4.1.11863.6.23.1.2.2.1.4 |
tpStormControlModePortLagThe LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.23.1.2.2.1.5 |
tpStormControlTableA list of storm control entries.
Here you can configure the bandwidth for forwarding packets. SEQUENCE OF TpStormControlEntry .1.3.6.1.4.1.11863.6.23.1.2.3 |
tpStormControlEntryAn entry contains of the information of storm control. TpStormControlEntry .1.3.6.1.4.1.11863.6.23.1.2.3.1 |
tpStormControlPortThe port number of the Switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11863.6.23.1.2.3.1.1 |
tpStormControlBroadCastRateSet the bandwidth for receiving broadcast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control function for the port.rw INTEGER .1.3.6.1.4.1.11863.6.23.1.2.3.1.2 |
tpStormControlMultiCastRateSet the bandwidth for receiving multicast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control function for the port.rw INTEGER .1.3.6.1.4.1.11863.6.23.1.2.3.1.3 |
tpStormControlULRateSet the bandwidth for receiving UL-Frame on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control function for the port.rw INTEGER .1.3.6.1.4.1.11863.6.23.1.2.3.1.4 |
tpStormControlPortLagThe LAG number which the port belongs to.ro OCTET STRING .1.3.6.1.4.1.11863.6.23.1.2.3.1.5 |
tplinkBandWidthNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.23.2 |
tpBroadcastRateExceedAn broadcastRateExceed notification is sent when the value
of broadcast stormControl rate set of port is exceeded.
Note that if you need this notification, the value of broadcast
stormControl rate of port must be set. The transmission of
stormControl notifications are throttled by the agent three sesonds
every time. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.23.2.1 |
tpMulticastRateExceedAn stormControl notification is sent when the value
of multicast stormControl rate set of port is exceeded.
Note that if you need this notification, the value of multicast
stormControl rate of port must be set. The transmission of
stormControl notifications are throttled by the agent three sesonds
every time. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.23.2.2 |
tpIngressRateExceedAn ingressRateExceed notification is sent when the value
of ingress rate set of port is exceeded.
Note that if you need this notification, the value of ingress
rate of port must be set.The transmission of ingressRateExceed
notifications are throttled by the agent three sesonds every time. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.23.2.3 |
tpEgressRateExceedAn egressRateExceed notification is sent when the value
of egress rate set of port is exceeded.
Note that if you need this notification, the value of egress
rate of port must be set.The transmission of egressRateExceed
notifications are throttled by the agent three sesonds every time. NOTIFICATION-TYPE .1.3.6.1.4.1.11863.6.23.2.4 |