TPLINK-AAA-MIB
AI MIB Summary
TPLINK-AAA-MIB provides vendor-specific SNMP access to configure and monitor Authentication, Authorization, and Accounting (AAA) parameters on TP-Link network devices, including user session states, authentication method settings, and accounting log configurations.
Private MIB for aaa configuration.
Main OID:
tplinkAaaMIB.1.3.6.1.4.1.11863.6.82
54
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
tplinkAaaMIBPrivate MIB for aaa configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.82 |
aaaGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.82.1 |
swAaaGlobalEnable0. disable 1. enable Enable/Disable the AAA function.rw Enumeration .1.3.6.1.4.1.11863.6.82.1.1 |
aaaApplicationList OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.82.1.2 |
aaaApplicationListTableDisplay the authentication method list the module use. SEQUENCE OF AAAAPPLICATIONLISTENTRY .1.3.6.1.4.1.11863.6.82.1.2.1 |
aaaApplicationListEntryAn entry contains of the information of methodlist the module use. AAAAPPLICATIONLISTENTRY .1.3.6.1.4.1.11863.6.82.1.2.1.1 |
moduleIdDisplay the id of module.ro INTEGER .1.3.6.1.4.1.11863.6.82.1.2.1.1.1 |
moduleNameDisplay the name of module.ro OCTET STRING .1.3.6.1.4.1.11863.6.82.1.2.1.1.2 |
loginListDisplay the login method list that the module use.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.1.2.1.1.3 |
enableListDisplay the enable method list that the module use.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.1.2.1.1.4 |
aaaAuthenticationListConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.82.2 |
authenticationLoginMethodListTableDisplay the authentication login method list. SEQUENCE OF AUTHENTICATIONLOGINMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.2.1 |
authenticationLoginMethodListEntryAn entry contains of the information of method list. AUTHENTICATIONLOGINMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.2.1.1 |
authenLoginListNameThe name of method list.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.1.1.1 |
authenLoginPri1The priority 1 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.1.1.2 |
authenLoginPri2The priority 2 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.1.1.3 |
authenLoginPri3The priority 3 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.1.1.4 |
authenLoginPri4The priority 4 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.1.1.5 |
authenLoginStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.2.1.1.6 |
authenticationEnableMethodListTableDisplay the authentication enable method list.. SEQUENCE OF AUTHENTICATIONENABLEMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.2.2 |
authenticationEnableMethodListEntryAn entry contains of the information of method list. AUTHENTICATIONENABLEMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.2.2.1 |
authenEnableListNameThe name of method list.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.2.1.1 |
authenEnablePri1The priority 1 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.2.1.2 |
authenEnablePri2The priority 2 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.2.1.3 |
authenEnablePri3The priority 3 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.2.1.4 |
authenEnablePri4The priority 4 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.2.2.1.5 |
authenEnableStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.2.2.1.6 |
aaaDot1xListConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.82.3 |
authenticationDot1xMethodListTableDisplay the authentication dot1x method list. SEQUENCE OF AUTHENTICATIONDOT1XMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.3.1 |
authenticationDot1xMethodListEntryAn entry contains of the information of method list. AUTHENTICATIONDOT1XMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.3.1.1 |
authenDot1xListNameThe name of method list.ro OCTET STRING .1.3.6.1.4.1.11863.6.82.3.1.1.1 |
authenDot1xPri1The priority 1 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.3.1.1.2 |
authenDot1xStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)ro TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.3.1.1.3 |
accountingDot1xMethodListTableDisplay the accounting dot1x method list. SEQUENCE OF ACCOUNTINGDOT1XMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.3.2 |
accountingDot1xMethodListEntryAn entry contains of the information of method list. ACCOUNTINGDOT1XMETHODLISTENTRY .1.3.6.1.4.1.11863.6.82.3.2.1 |
acctDot1xListNameThe name of method list.ro OCTET STRING .1.3.6.1.4.1.11863.6.82.3.2.1.1 |
acctDot1xPri1The priority 1 method.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.3.2.1.2 |
acctDot1xStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)ro TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.3.2.1.3 |
radiusDeamonTableRADIUS DEAMON is a server used to authenticate the user,which is getting access to the NAS(Network Access Server). SEQUENCE OF RADIUSDEAMONENTRY .1.3.6.1.4.1.11863.6.82.4 |
radiusDeamonEntryAn entry contains of the information of a radius deamon. RADIUSDEAMONENTRY .1.3.6.1.4.1.11863.6.82.4.1 |
radiusDeamonServerIpEnter the IP address of the RADIUS server.rw IpAddress .1.3.6.1.4.1.11863.6.82.4.1.1 |
radiusDeamonTimeoutEnter the number of seconds the switch waits for a reply (1-9).rw INTEGER .1.3.6.1.4.1.11863.6.82.4.1.2 |
radiusDeamonRetransimitEnter the number of times the switch will resend an authentication request to the RADIUS server (1-3).rw INTEGER .1.3.6.1.4.1.11863.6.82.4.1.3 |
radiusDeamonKeyEnter the encryption key used to authenticate logon access.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.4.1.4 |
radiusDeamonAuthPortEnter the radius server port used for sending authentication packets (1-65535).rw INTEGER .1.3.6.1.4.1.11863.6.82.4.1.5 |
radiusDeamonAcctPortEnter the radius server port used for sending authentication packets (1-65535).rw INTEGER .1.3.6.1.4.1.11863.6.82.4.1.6 |
radiusDeamonStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.4.1.7 |
tacacsDeamonTableTACACS(Terminal Access Controller Access Control System) DEAMON is a server used to authenticate the user,which is getting access to the NAS(Network Access Server). SEQUENCE OF TACACSDEAMONENTRY .1.3.6.1.4.1.11863.6.82.5 |
tacacsDeamonEntryAn entry contains of the information of a tacacs deamon. TACACSDEAMONENTRY .1.3.6.1.4.1.11863.6.82.5.1 |
tacacsDeamonServerIpEnter the IP address of the TACACS+ server.rw IpAddress .1.3.6.1.4.1.11863.6.82.5.1.1 |
tacacsDeamonTimeoutEnter the number of seconds the switch waits for a reply (1-10).rw INTEGER .1.3.6.1.4.1.11863.6.82.5.1.2 |
tacacsDeamonKeyEnter the encryption key used to authenticate logon access.rw OCTET STRING .1.3.6.1.4.1.11863.6.82.5.1.3 |
tacacsDeamonPortEnter the tacacs+ server port used for sending authentication packets (1-65535).rw INTEGER .1.3.6.1.4.1.11863.6.82.5.1.4 |
tacacsDeamonStatusthe following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)rw TPRowStatus (TPLINK-TC-MIB) .1.3.6.1.4.1.11863.6.82.5.1.5 |