TPLINK-8021X-MIB
Private MIB for 802.1x configuration.
Main OID:
tplink8021xMIB.1.3.6.1.4.1.11863.6.31
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
tplink8021xMIBPrivate MIB for 802.1x configuration. MODULE-IDENTITY .1.3.6.1.4.1.11863.6.31 |
tplink8021xMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.31.1 |
tp8021xGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.31.1.1 |
tp8021xGlobalEnable0. disable
1. enable
Enable/Disable the 802.1X function.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.1 |
tp8021xAuthModeSelect the Authentication Method
0. pap: IEEE 802.1X authentication system uses extensible authentication protocol (EAP)
to exchange information between the switch and the client.
The transmission of EAP packets is terminated at the switch and the EAP packets
are converted to the other protocol (such as RADIUS) packets for transmission.
1. eap: IEEE 802.1X authentication system uses extensible authentication protocol (EAP)
to exchange information between the switch and the client.
The EAP protocol packets with authentication data can be encapsulated in the
advanced protocol (such as RADIUS) packets to be transmitted to the authentication
server.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.2 |
tp8021xHandshake0. disable
1. enable
Enable/Disable the handshake feature.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.3 |
tp8021xGuestVlanEnable0. disable
1. enable
Enable/Disable the Guest VLAN feature.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.4 |
tp8021xGuestVlanIDEnter your desired VLAN ID to enable the Guest VLAN feature.
The supplicants in the Guest VLAN can access the specified network source.rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.5 |
tp8021xQuietEnable0. disable
1. enable
Enable/Disable the Quiet timer.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.6 |
tp8021xQuietPeriodSpecify a value for Quiet Period. Once the supplicant failed to the 802.1X Authentication,
then the switch will not respond to the authentication request from the same supplicant
during the Quiet Period. (1-999 second)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.7 |
tp8021xRetryTimesSpecify the maximum transfer times of the repeated authentication request.(1-9)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.8 |
tp8021xSupplicantTimeOutSpecify the maximum time for the switch to wait for the response from supplicant
before resending a request to the supplicant. (1-9 second)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.9 |
tp8021xServerTimeOutSpecify the maximum time for the switch to wait for the response from authentication
server before resending a request to the authentication server. (1-9 second)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.10 |
tp8021xAuthPrimaryIPEnter the IP address of the authentication server.rw IpAddress .1.3.6.1.4.1.11863.6.31.1.1.11 |
tp8021xAuthSecondaryIPEnter the IP address of the alternate authentication server.rw IpAddress .1.3.6.1.4.1.11863.6.31.1.1.12 |
tp8021xServerAuthPortSet the UDP port of authentication server(s). The default port is 1812(1-65535)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.13 |
tp8021xServerAuthKeySet the shared password for the switch and the authentication
servers to exchange messages.(0-31 characters).rw OCTET STRING .1.3.6.1.4.1.11863.6.31.1.1.14 |
tp8021xAcctEnable0. disable
1. enable
Enable/Disable the accounting feature.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.1.15 |
tp8021xAcctPrimaryIPEnter the IP address of the accounting server.rw IpAddress .1.3.6.1.4.1.11863.6.31.1.1.16 |
tp8021xAcctSecondaryIPEnter the IP address of the alternate accounting server.rw IpAddress .1.3.6.1.4.1.11863.6.31.1.1.17 |
tp8021xAcctPortSet the UDP port of accounting server(s). The default port is 1813(1-65535)rw INTEGER .1.3.6.1.4.1.11863.6.31.1.1.18 |
tp8021xAcctKeySet the shared password for the switch and the accounting servers
to exchange messages. (0-31 characters).rw OCTET STRING .1.3.6.1.4.1.11863.6.31.1.1.19 |
tp8021xPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.31.1.2 |
tp8021xPortConfigTableA list of 8021x port config entries. SEQUENCE OF TP8021XPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.31.1.2.1 |
tp8021xPortConfigEntryAn entry contains of the information of 8021x port config.
Here you can configure the ports for the 802.1X authentication. TP8021XPORTCONFIGENTRY .1.3.6.1.4.1.11863.6.31.1.2.1.1 |
tp8021xPortConfigPortIndexThis object indicates the port number.ro DisplayString .1.3.6.1.4.1.11863.6.31.1.2.1.1.1 |
tp8021xPortConfigEnable0. disable
1. enable
Select Enable/Disable the 802.1X authentication feature for the port.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.2.1.1.2 |
tp8021xPortConfigGuestVlanEnable0. disable
1. enable
Select Enable/Disable the Guest VLAN feature for the port.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.2.1.1.3 |
tp8021xPortConfigControlModeSpecify the Control Mode for the port.
0. force auth: In this mode, the port can work normally without passing the 802.1X Authentication.
1. force unauth: In this mode, the port is forbidden working for its fixed unauthorized status.
2. auto auth: In this mode, the port will normally work only after passing the 802.1X Authentication.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.2.1.1.4 |
tp8021xPortConfigControlTypeSpecify the Control Type for the port.
0. base of mac: Any client connected to the port should pass the 802.1X Authentication for access.
1. base of port: All the clients connected to the port can access the network on the condition
that any one of the clients has passed the 802.1X Authentication.rw Enumeration .1.3.6.1.4.1.11863.6.31.1.2.1.1.5 |
tp8021xPortConfigAuthStateThe authentication status of the port.
0. unAuthorized
1. Authorizedro Enumeration .1.3.6.1.4.1.11863.6.31.1.2.1.1.6 |
tp8021xPortConfigPortLagthe lag the port belong toro OCTET STRING .1.3.6.1.4.1.11863.6.31.1.2.1.1.7 |
tplink8021xNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11863.6.31.2 |