SWL3MGMT-MIB
AI MIB Summary
SWL3MGMT-MIB provides proprietary Layer 3 management interfaces for monitoring routing table states, interface status, and IP forwarding metrics on specific enterprise network devices. This module enables the collection of standard IP routing statistics and link-layer attributes required for network topology analysis and fault isolation within the vendor's ecosystem.
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
Main OID:
swL3MgmtMIB.1.3.6.1.4.1.2272.1.201.1.3
108
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
108 total| Object Name |
|---|
swL3MgmtMIBThe Structure of Layer 3 Network Management Information for the
proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.201.1.3 |
swL3DevMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.1 |
swL3DevCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.1.1 |
swL3DevCtrlRIPStateThis object indicates Routing Information Protocol (RIP)
version 2 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.1.1.1 |
swL3DevCtrlOSPFStateThis object indicates OSPF protocol is enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.1.1.2 |
swL3DevCtrlDVMRPStateThis object indicates DVMRP protocol is enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.1.1.3 |
swL3DevCtrlVRRPStateThis object indicates VRRP protocol is enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.1.1.4 |
swL3DevCtrlVRRPPingVirtualAddrStateThis object let host can ping the virtual ip address or not.
Default is disabled(2).rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.1.1.5 |
swL3IpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.2 |
swL3IpCtrlMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.2.1 |
swL3IpCtrlTableThis table contain IP interface information. SEQUENCE OF SwL3IpCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.2.1.1 |
swL3IpCtrlEntryA list of information about a specific IP interface. SwL3IpCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1 |
swL3IpCtrlInterfaceNameThis object indicates the name of the IP interface.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.1 |
swL3IpCtrlIfIndexThis object uniquely identifies the IP interface number in the
swL3IpCtrlTable.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.2 |
swL3IpCtrlIpAddrThe IP address of the interface. This object only can take the
value of the unicast IP address.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.3 |
swL3IpCtrlIpSubnetMaskThe IP net mask for this interface.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.4 |
swL3IpCtrlVlanNameThis object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table.rw DisplayString .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.5 |
swL3IpCtrlModeThis object indicates the IP operation mode.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
manual(2) - the IP address will be set by manual.
bootp(3) - the IP address will be set automatically from BOOTP
server.
dhcp(4) - the IP address will be set automatically from DHCP
server.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.6 |
swL3IpCtrlStateThis variable displays the status of the entry. The status used
for creating, modifying, and deleting instances of the objects
in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.7 |
swL3IpCtrlOperStateThe current operational state of the IP interface.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.8 |
swL3IpFdbMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.2.2 |
swL3IpFdbInfoTableA table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets. SEQUENCE OF SwL3IpFdbInfoEntry .1.3.6.1.4.1.2272.1.201.1.3.2.2.1 |
swL3IpFdbInfoEntryInformation about a specific IP address for which the bridge
has some forwarding and/or filtering information. SwL3IpFdbInfoEntry .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1 |
swL3IpFdbInfoIpAddrA IP address for which switch has forwarding and/or filtering
information.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.1 |
swL3IpFdbInfoIpSubnetMaskA IP net mask for this interface.for which switch has
forwarding and/or filtering information.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.2 |
swL3IpFdbInfoPortEither the value '0', or the port number of the port on which
packet having a IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port number has not been learned
but that switch does have some forwarding/filtering information
about this address.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.3 |
swL3IpFdbInfoTypeThe status of this entry.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.4 |
swL3IpFilterMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.2.3 |
swL3IpFilterAddrConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.2.3.1 |
swL3IpFilterAddrMaxSupportedEntriesMaximum number of entries in the IP address filtering table
(swL3IpFilterAddrCtrlTable) .ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.1 |
swL3IpFilterAddrCurrentTotalEntriesCurrent applied number of entries in the IP address filtering
table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it
means there are two entries in swL3IpFilterAddrCtrlTable.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.2 |
swL3IpFilterAddrCtrlTableThis table defines information for the device to filter packets
with specific IP address (either as the DA and/or as the SA).
The IP address can be a unicast address or multicast address.
This table has higher priority than both static FDB table and
IGMP table. It means that if a IP address appears on this table
also appears on the static FDB table, the device will use the
information provide by this table to process the packet. SEQUENCE OF SwL3IpFilterAddrCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3 |
swL3IpFilterAddrCtrlEntryA list of information about a specific unicast/multicast IP
address for which the switch has filtering information. SwL3IpFilterAddrCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1 |
swL3IpFilterAddrIpAddrThis object indicates a unicast/multicast IP address for which
the switch has filtering information. But if the
swL3IpFilterAddrCtrlState = src-addr, then the object can not be
a multicast IP address (Class D IP address).ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.1 |
swL3IpFilterAddrCtrlStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
dst-addr(2) - recieved frames's destination address are
currently used to be filtered as it meets with the IP
address entry of the table.
src-addr(3) - recieved frames's source address are currently
used to be filtered as it meets with the IP address entry of
the table.
dst-src-addr(4) - recieved frames's destination address or
source address are currently used to be filtered as it meets
with the IP address entry of the table.
invalid(5) - writing this value to the object, and then the
corresponding entry will be removed from the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.2 |
swL3IpArpAgingTimeThe timeout period in minutes for aging out dynamically learned
arp information.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.4 |
swL3IpStaticRouteTableThis entity's IP static Routing table. SEQUENCE OF SwL3IpStaticRouteEntry .1.3.6.1.4.1.2272.1.201.1.3.2.5 |
swL3IpStaticRouteEntryA particular route to a particular destination, under a particular policy. SwL3IpStaticRouteEntry .1.3.6.1.4.1.2272.1.201.1.3.2.5.1 |
swL3IpStaticRouteDestThe destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteMask object is not equal to x.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.5.1.1 |
swL3IpStaticRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the swL3IpStaticRouteMask by reference to the IP
Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteDest object is not equal to
swL3IpStaticRouteDest.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.5.1.2 |
swL3IpStaticRouteNextHopOn remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.5.1.3 |
swL3IpStaticRouteMetricThe routing metric for this route.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.5.1.4 |
swL3IpStaticRouteStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.5.1.5 |
swL3IpArpTableThe ARP table used for mapping from IP addresses to physical
addresses. SEQUENCE OF SwL3IpArpEntry .1.3.6.1.4.1.2272.1.201.1.3.2.6 |
swL3IpArpEntryEach entry contains one IpAddress to `physical' address
equivalence. SwL3IpArpEntry .1.3.6.1.4.1.2272.1.201.1.3.2.6.1 |
swL3IpArpIfIndexThe interface on which this entry's equivalence is effective.
The interface identified by a particular value of this index is
the same interface as identified by the same value of ifIndex.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.6.1.1 |
swL3IpArpNetAddressThe IpAddress corresponding to the media-dependent `physical'
address.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.2.6.1.2 |
swL3IpArpPhysAddressThe media-dependent `physical' address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.201.1.3.2.6.1.3 |
swL3IpArpTypeThe type of mapping.
Setting this object to the value invalid(2) has the effect of
invalidating the corresponding entry in the swL3IpArpTable.
That is, it effectively dissasociates the interface identified
with said entry from the mapping identified with said entry. It
is an implementation-specific matter as to whether the agent
removes an invalidated entry from the table. Accordingly,
management stations must be prepared to receive tabular
information from agents that corresponds to entries not
currently in use. Proper interpretation of such entries
requires examination of the relevant swL3IpArpType object.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.6.1.4 |
swL3IpArpDynamicAgingTimeThe timeout period in seconds for aging out dynamically learned
arp information. If the swL3IpArpType is not dynamic(3), this
object will display zero.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.6.1.5 |
swL3IpArpReqRateLimitStateTo enable limit ARP requests trapped to CPU or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.2.7 |
swL3IpArpReqRateLimitValueTo configure how much frames per second that ARP request
limit. This value will be usefull only when
swL3IpArpReqRateLimitState is enabled.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.2.8 |
swL3RelayMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.3 |
swL3RelayBootpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.3.1 |
swL3RelayBootpStateThis object indicates BOOTP Relay function is enabled or
disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.1.1 |
swL3RelayBootpHopCountThis object indicates the maximum number of router hops that
the BOOTP packets can cross.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.3.1.2 |
swL3RelayBootpTimeThresholdThis object indicates the minimum time in seconds within which
the switch must relay the BOOTP request. If this time is
exceeded, the switch will drop the BOOTP packet.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.3.1.3 |
swL3RelayBootpCtrlTableThis table specifys the IP address as a destination to forward
(relay) BOOTP packets to. SEQUENCE OF SwL3RelayBootpCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.3.1.4 |
swL3RelayBootpCtrlEntryA list of information specifies the IP address as a destination
to forward (relay) BOOTP packets to. SwL3RelayBootpCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1 |
swL3RelayBootpCtrlInterfaceNameThe name of the IP interface.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.1 |
swL3RelayBootpCtrlServerThe BOOTP server IP address.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.2 |
swL3RelayBootpCtrlStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.3 |
swL3RelayDnsMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.3.2 |
swL3RelayDnsStateThis object indicates DNS Relay function is enabled or
disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.2.1 |
swL3RelayDnsPrimaryServerThis object indicates the address of the primary DNS server.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.3.3.2.2 |
swL3RelayDnsSecondaryServerThis object indicates the address of the secondary DNS server.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.3.3.2.3 |
swL3RelayDnsCacheStateThis object indicates DNS Relay cache is enabled or
disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.2.4 |
swL3RelayDnsStaticTableStateThis object indicates DNS Relay static table is enabled or
disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.2.5 |
swL3RelayDnsCtrlTableThis table display the current DNS relay static table. SEQUENCE OF SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.3.2.6 |
swL3RelayDnsCtrlEntryA list of information display the current DNS relay static
table. SwL3RelayDnsCtrlEntry .1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1 |
swL3RelayDnsCtrlDomainNameThe domain name of the entry.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.1 |
swL3RelayDnsCtrlIpAddrThe IP address of the entry.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.2 |
swL3RelayDnsCtrlStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.3 |
swL3Md5TableThis table display the current MD5 key table. SEQUENCE OF SwL3Md5Entry .1.3.6.1.4.1.2272.1.201.1.3.4 |
swL3Md5EntryA list of information display the current MD5 key table. SwL3Md5Entry .1.3.6.1.4.1.2272.1.201.1.3.4.1 |
swL3Md5KeyIdThe MD5 key ID.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.3.4.1.1 |
swL3Md5KeyAn MD5 password of up to 16 bytes.rw DisplayString .1.3.6.1.4.1.2272.1.201.1.3.4.1.2 |
swL3Md5StateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.4.1.3 |
swL3RouteRedistriTableRoute redistribution allows routers on the network. That are
running different routing protocols to exchange routing
information. This is accomplished by comparing the routes stored
in the vairous routers routing tables and assinging appropriate
metrics. This information is then exchanged among the various
routers according to the individual routers current routing
protocol. SEQUENCE OF SwL3RouteRedistriEntry .1.3.6.1.4.1.2272.1.201.1.3.5 |
swL3RouteRedistriEntryA list of information display the route redistribution table. SwL3RouteRedistriEntry .1.3.6.1.4.1.2272.1.201.1.3.5.1 |
swL3RouteRedistriSrcProtocolAllows the selection of the protocol of the source device.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.3.5.1.1 |
swL3RouteRedistriDstProtocolAllows the selection of the protocol of the destination device.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.3.5.1.2 |
swL3RouteRedistriTypeAllows the selection of one of the methods for calcalculating
the metric value.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.5.1.3 |
swL3RouteRedistriMetricAllows the entry of an OSPF interface cost. This is analogous
to a Hop Count in the RIP routing protocol. The value '0'
indicates default value.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.5.1.4 |
swL3RouteRedistriStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.5.1.5 |
swL3OspfHostTableThe list of Hosts, and their metrics, that the router will
advertise as host routes. SEQUENCE OF SwL3OspfHostEntry .1.3.6.1.4.1.2272.1.201.1.3.6 |
swL3OspfHostEntryA metric to be advertised, for a given type of service, when a
given host is reachable. SwL3OspfHostEntry .1.3.6.1.4.1.2272.1.201.1.3.6.1 |
swL3OspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.3.6.1.1 |
swL3OspfHostTOSThe Type of Service of the route being configured.ro TOSType (OSPF-MIB) .1.3.6.1.4.1.2272.1.201.1.3.6.1.2 |
swL3OspfHostMetricThe Metric to be advertised.rw Metric (OSPF-MIB) .1.3.6.1.4.1.2272.1.201.1.3.6.1.3 |
swL3OspfHostStatusThis variable displays the status of the entry. Setting it to
'invalid' has the effect of rendering it inoperative. The internal
effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.201.1.3.6.1.4 |
swL3OspfHostAreaIDThe Area the Host Entry is to be found within. By default, the
area that a subsuming OSPF interface is in, or 0.0.0.0rw AreaID (OSPF-MIB) .1.3.6.1.4.1.2272.1.201.1.3.6.1.5 |
swL3VrrpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.3.7 |
swL3VrrpOperTableOperations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'swL3VrrpOperEntry' items. SEQUENCE OF SwL3VrrpOperEntry .1.3.6.1.4.1.2272.1.201.1.3.7.1 |
swL3VrrpOperEntryAn entry in the swL3VrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID. SwL3VrrpOperEntry .1.3.6.1.4.1.2272.1.201.1.3.7.1.1 |
swL3VrrpOperVrIdThis object contains the Virtual Router Identifier (VRID). INTEGER .1.3.6.1.4.1.2272.1.201.1.3.7.1.1.1 |
swL3VrrpOperCriticalIpAddrTo make sure the ip interface connected by this virtual router
is alive or not.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.3.7.1.1.2 |
swL3VrrpOperCriticalIpStateTo enable or disable the feature of critical IP.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.3.7.1.1.3 |
swL3VrrpOperHoldDownTimerWhen VRRP is started, it need to spend this period of time to
let the routing would be leared as well. The unit of this object
is second.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.7.1.1.4 |
swL3RoutePrefTableIP Route Pref table. SEQUENCE OF SwL3RoutePrefEntry .1.3.6.1.4.1.2272.1.201.1.3.8 |
swL3RoutePrefEntryAn entry of Ip Route Pref Table. SwL3RoutePrefEntry .1.3.6.1.4.1.2272.1.201.1.3.8.1 |
swL3RoutePrefProtocolProtocolro Enumeration .1.3.6.1.4.1.2272.1.201.1.3.8.1.1 |
swL3RoutePrefValueThis value is a preference value for the given protocol.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.8.1.2 |
swL3DvmrpInterfaceTableThe (conceptual) table listing the router's multicast-
capable interfaces. SEQUENCE OF SwL3DvmrpInterfaceEntry .1.3.6.1.4.1.2272.1.201.1.3.9 |
swL3DvmrpInterfaceEntryAn entry (conceptual row) in the swL3DvmrpInterfaceTable. SwL3DvmrpInterfaceEntry .1.3.6.1.4.1.2272.1.201.1.3.9.1 |
swL3DvmrpInterfaceIfIndexThe ifIndex value of the interface for which DVMRP is
enabled. INTEGER .1.3.6.1.4.1.2272.1.201.1.3.9.1.1 |
swL3DvmrpInterfaceNeighborTimeoutThe time period for DVMRP will hold Neithbor Router reports
before issuing poison route messages. The unit is second.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.9.1.2 |
swL3DvmrpInterfaceProbeDVMRP defines an extension to IGMP that allows routers to
query other routers to determine if a multicast group is
present on an given router subnetwork or not. This is referred
to as a 'probe'. The unit is second.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.3.9.1.3 |