SL-SONET-ALARM-MIB
The SL-SONET-ALARM-MIB enables monitoring of Synchronous Optical Networking (SONET) interface alarm states, specifically tracking signal degradation indicators such as Loss of Signal (LOS), Loss of Frame (LOF), and Alarm Indication Signal (AIS) on optical transport hardware. This module facilitates the detection and reporting of physical layer faults to ensure the integrity of high-speed optical transmission links.
Imported Objects
Objects
12 total| Object Name |
|---|
slSonetAlarmMibThis MIB module describes the SONET ALARMS. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.6.4 |
slSonetAlarmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.6.4.1 |
slSonetAlarmConfigTableThis table contains objects to configure the SONET Alarms. SEQUENCE OF SlSonetAlarmConfigEntry .1.3.6.1.4.1.4515.1.6.4.1.1 |
slSonetAlarmConfigEntryAn entry exist for each type of alarm.
The entry describes the alarm properties. SlSonetAlarmConfigEntry .1.3.6.1.4.1.4515.1.6.4.1.1.1 |
slSonetAlarmIfIndexThe corresponding SONET interface index.
The interface type may be of sonet(39), sonetPath(50) or sonetVT(51).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.6.4.1.1.1.1 |
slSonetAlarmTypeThe alarm type.ro SonetAlarmType .1.3.6.1.4.1.4515.1.6.4.1.1.1.2 |
slSonetAlarmMaskThe alarm mask. If True - enable alarm,
otherwise - disable alarm.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.6.4.1.1.1.3 |
slSonetAlarmStatusThe Alarm status. If True the alarm
state is ON. Otherwise the alarm state is OFF.
The states shown here are the stabilized state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.6.4.1.1.1.4 |
slSonetAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.6.4.2 |
slSonetAlarmSeverityThe alarm severity.ro Enumeration .1.3.6.1.4.1.4515.1.6.4.2.1 |
slSonetAlarmServiceAffectThe alarm service affecting Yes/No.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.6.4.2.2 |
slSonetAlarmTrapAn slSonetAlarmTrap notification is sent when an alarm occures. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.6.4.2.3 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.