Home/Catalog/SL-SONET-SUP-PM-MIB

SL-SONET-SUP-PM-MIB

This MIB module provides extensions to the SONET-MIB (RFC 2558) objects. It provides definitions for management information that supports those parts of ANSI T1.231-1997 that are not covered by the SONET-MIB.
Main OID:
sonetSupPmMIB.1.3.6.1.4.1.4515.1.6.3
195
Objects
Active
Status
7
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
PerfHist-TC-MIB
SONET-MIB
IF-MIB
SL-SONET-MIB

Objects

195 total
Object Name
sonetSupPmMIBThis MIB module provides extensions to the SONET-MIB (RFC 2558) objects. It provides definitions for management information that supports those parts of ANSI T1.231-1997 that are not covered by the SONET-MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.4515.1.6.3
sonetSupObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1
sonetSupConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.1
sonetSupMedium
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.2
sonetSupSection
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.3
sonetSectionDefaultThresholdTableThe table of default thresholds for SONET section counters.
SEQUENCE OF SonetSectionDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.1
sonetSectionDefaultThresholdEntryAn entry in the table of default thresholds. The table has a variable for each counter type and accumulation period combination, but uses an index to indetify the digital signal rate. The agent must provide a set of default threshold values for all rates that the NE supports. The agent may make these variables read-only.
SonetSectionDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1
sonetSectionDefaultThresholdRateThe digital signal rate for which the default threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.1
sonetSectionDefaultCVThresholdThe default value for SONET CV-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.2
sonetSectionDefaultESThresholdThe default value for SONET ES-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.3
sonetSectionDefaultSESThresholdThe default value for SONET SES-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.6
sonetSectionDefaultSEFSThresholdThe default value for SONET SEFS-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.7
sonetSectionDefaultDayCVThresholdThe default value for SONET CV-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.8
sonetSectionDefaultDayESThresholdThe default value for SONET ES-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.9
sonetSectionDefaultDaySESThresholdThe default value for SONET SES-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.12
sonetSectionDefaultDaySEFSThresholdThe default value for SONET SEFS-S counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.1.1.13
sonetSectionThresholdTableThe table of trap threshold values for SONET section counters.
SEQUENCE OF SonetSectionThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.2
sonetSectionThresholdEntryAn entry in the table of SONET Section trap thresholds.
SonetSectionThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1
sonetSectionCurrentCVThresholdThe trap threshold value for the interface's current 15-minute interval CV-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.1
sonetSectionCurrentESThresholdThe trap threshold value for the interface's current 15-minute interval ES-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.2
sonetSectionCurrentSESThresholdThe trap threshold value for the interface's current 15-minute interval SES-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.5
sonetSectionCurrentSEFSThresholdThe trap threshold value for the interface's current 15-minute interval SEFS-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.6
sonetSectionDayCVThresholdThe trap threshold value for the interface's current day CV-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.7
sonetSectionDayESThresholdThe trap threshold value for the interface's current day ES-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.8
sonetSectionDaySESThresholdThe trap threshold value for the interface's current day SES-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.11
sonetSectionDaySEFSThresholdThe trap threshold value for the interface's current day SEFS-S counter. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.2.1.12
sonetSectionDayTableThe SONET Section Day table. Contains various statistics collected by each SONET Section over multiple 1-day intervals of operation.
SEQUENCE OF SonetSectionDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.15
sonetSectionDayEntryAn entry in the SONET Section Day table.
SonetSectionDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1
sonetSectionDayNumberA number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval. Interval 0 is used for the Untimed counters.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.1
sonetSectionDayStartTimeThis variable indicates the date and time at which this 1-day interval of sections measurements began on this interface.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.2
sonetSectionDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.3
sonetSectionDayCVsThe section code violation (CV-S) count is the number of BIP-8 errors which were detected at the SONET section layer interface in a previous 1-day interval. Each section BIP-8 can detect up to eight errors per STS-N frame, with each error incrementing the CV counter. CVs for the section layer are collected using the BIP-8 in the B1 byte located in the section overhead of STS-1 number 1.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.4
sonetSectionDayESsThe section errored second (ES-S) count is the number of 1-second intervals containing one or more BIP-8 error (B1 byte), one or more SEF defects, or one or more LOS defects which were encountered by the SONET section layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.5
sonetSectionDaySESsThe section severely errored second (SES-S) count is the number of 1-second intervals containing sonetSevereErrorThreshold or more BIP-8 errors (B1 byte), one or more SEF defects, or one or more LOS defects which were encountered by the SONET section layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.8
sonetSectionDaySEFSsThe section severely errored frame second (SEFS-S) count is the number of 1-second intervals containing one or more SEF defects which were encountered by the SONET section layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.9
sonetSectionDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.10
sonetSectionDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.3.15.1.11
sonetSupLine
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.4
sonetLineDefaultThresholdTableThe table of default thresholds for SONET Line counters.
SEQUENCE OF SonetLineDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.1
sonetLineDefaultThresholdEntryAn entry in the table of default thresholds. The table has a variable for each counter type and accumulation period combination, but uses indexes to indetify the digital signal direction and rate. The agent must provide a set of default threshold values for all rates that the NE supports. The agent may make these variables read-only.
SonetLineDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1
sonetLineDefaultThresholdDirectionThe digital signal direction for which the default threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.1
sonetLineDefaultThresholdRateThe digital signal rate for which the default threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.2
sonetLineDefaultCVThresholdThe default value for SONET CV-L and CV-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.3
sonetLineDefaultESThresholdThe default value for SONET ES-L and ES-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.4
sonetLineDefaultSESThresholdThe default value for SONET SES-L and SES-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.7
sonetLineDefaultUASThresholdThe default value for SONET UAS-L and UAS-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.9
sonetLineDefaultDayCVThresholdThe default value for SONET CV-L and CV-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.10
sonetLineDefaultDayESThresholdThe default value for SONET ES-L and ES-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.11
sonetLineDefaultDaySESThresholdThe default value for SONET SES-L and SES-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.14
sonetLineDefaultDayUASThresholdThe default value for SONET UAS-L and UAS-LFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.1.1.16
sonetLineThresholdTableThe table of trap threshold values for SONET Line counters.
SEQUENCE OF SonetLineThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.2
sonetLineThresholdEntryAn entry in the table of SONET Line trap thresholds.
SonetLineThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1
sonetLineThresholdDirectionThe digital signal direction for which the threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.1
sonetLineCurrentCVThresholdThe trap threshold value for the interface's current 15-minute interval CV-L and CV-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.2
sonetLineCurrentESThresholdThe trap threshold value for the interface's current 15-minute interval ES-L and ES-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.3
sonetLineCurrentSESThresholdThe trap threshold value for the interface's current 15-minute interval SES-L and SES-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.4
sonetLineCurrentUASThresholdThe trap threshold value for the interface's current 15-minute interval UAS-L and UAS-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.5
sonetLineDayCVThresholdThe trap threshold value for the interface's current day CV-L and CV-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.6
sonetLineDayESThresholdThe trap threshold value for the interface's current day ES-L and ES-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.7
sonetLineDaySESThresholdThe trap threshold value for the interface's current day SES-L and SES-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.8
sonetLineDayUASThresholdThe trap threshold value for the interface's current day UAS-L and UAS-LFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.2.1.9
sonetLineDayTableThe SONET Line Day table. Contains various statistics collected by each SONET line over multiple 1-day intervals of operation.
SEQUENCE OF SonetLineDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.5
sonetLineDayEntryAn entry in the SONET Line Day table.
SonetLineDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1
sonetLineDayNumberA number which identifies the 1-day interval for which the set of near-end line related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval. Interval 0 is used for the Untimed counters.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.1
sonetLineDayStartTimeThis variable indicates the date and time at which this 1-day interval of near-end line measurements began on this interface.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.2
sonetLineDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.3
sonetLineDayCVsThe line code violation (CV-L) count is the number of BIP-8 errors which were detected at the SONET line layer interface in a previous 1-day interval. Each line BIP-8 can detect up to eight errors per STS-1 frame, with each error incrementing the CV counter. CVs for the line layer are collected using the BIP-8s in the B2 byte located in the line overhead of STS-1. (Since all CVs on an STS-N line are counted together, this is equivalent to counting each error in the BIP-8N contained in the B2 bytes of the STS-N line overhead.) Thus, on an STS-N signal, up to 8 x N CVs may occure in each STS-N frame.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.5
sonetLineDayESsThe line errored second (ES-L) count is the number of 1-second intervals containing one or more EDC error (B2 byte), or one or more AIS-L defects which were encountered by the SONET line layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.6
sonetLineDaySESsThe line severely errored second (SES-L) is a count of 1-second intervals containing sonetSevereErrorThreshold or more EDC errors (B2 byte) or one or more AIS-L defects which were encountered by the SONET line layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.9
sonetLineDayUASsThe line unavailable second (UAS-L) is a count of 1-second intervals for which the SONET line was unavailable during a previous 1-day interval. The SONET line becomes unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls are included in unavailable time. Once unavailable, the SONET line becomes available at the onset of 10 contiguous seconds with no SES-Ls. The 10 seconds with no SES-Ls are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.10
sonetLineDayPSCThe number of protection switching occured.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.11
sonetLineDayPSDThe length of time in seconds, where the protection unit was in service and the working unit was out of service, during the day.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.12
sonetLineDayFCsThe number of failure counts occured during the day.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.13
sonetLineDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.14
sonetLineDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.15
sonetSupFarEndLine
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.5
sonetFarEndLineDayTableThe SONET Far End Line Day table. Contains various statistics collected by each SONET line over multiple 1-day intervals of operation.
SEQUENCE OF SonetFarEndLineDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.5.3
sonetFarEndLineDayEntryAn entry in the SONET Far End Line Day table.
SonetFarEndLineDayEntry
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1
sonetFarEndLineDayNumberA number which identifies the 1-day interval for which the set of far-end line related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.1
sonetFarEndLineDayStartTimeThis variable indicates the date and time at which this 1-day interval of far-end line measurements began on this interface.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.2
sonetFarEndLineDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing (e.g., when a near-end defect prevents some far-end data from being collected).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.3
sonetFarEndLineDayCVsThe far-end line code violation (CV-LFE) count is the number of REI-Ls which were detected at the SONET line layer interface in a previous 1-day interval. For EC-1 or OC-1, REI-L is bits 5 to 8 of the M0 byte; for EC-N or OC-N (N>2), M1 byte.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.5
sonetFarEndLineDayESsThe far-end line errored second (ES-LFE) count is the number of 1-second intervals containing one or more REDC-Ls, or one or more RDI-L defects which were encountered by the SONET line layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.6
sonetFarEndLineDaySESsThe far-end line severely errored second (SES-LFE) is a count of 1-second intervals containing sonetSevereErrorThreshold or more REDC-Ls or one or more RDI-L defects which were detected by the SONET line layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.9
sonetFarEndLineDayUASsThe far-end line unavailable second (UAS-LFE) is a count of 1-second intervals for which the SONET line was unavailable during a previous 1-day interval. The SONET line becomes unavailable at the onset of 10 contiguous SES-LEFs. The 10 SES-LEFs are included in unavailable time. Once unavailable, the SONET line becomes available at the onset of 10 contiguous seconds with no SES-LEFs. The 10 seconds with no SES-LEFs are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.10
sonetFarEndLineDayFCsThe far-end line failures count.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.11
sonetFarEndLineDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.12
sonetFarEndLineDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.1.5.3.1.13
sonetTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.6
sonetCounterIdThe OBJECT IDENTIFIER of the instance of the SONET counter that has crossed its threshold.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.1.6.1
sonetCounterValueThe current value of the SONET counter that has crossed its threshold.ro
Integer32
.1.3.6.1.4.1.4515.1.6.3.1.6.2
sonetThresholdCrossingThis notification signifies that a counter has crossed its designated threshold. The term 'threshold crossing' means that a threshold has been reached or exceeded. A threshold crossing alert message (trap) signifies a performance degredation at or above the preset threshold value.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4515.1.6.3.1.6.3
sonetSupObjectsPath
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.2
sonetSupPath
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.2.1
sonetPathDefaultThresholdTableThe table of default thresholds for SONET Path counters.
SEQUENCE OF SonetPathDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.1
sonetPathDefaultThresholdEntryAn entry in the table of default thresholds. The table has a variable for each counter type and accumulation period combination, but uses indexes to indetify the digital signal direction and rate. The agent must provide a set of default threshold values for all rates that the NE supports. The agent may make these variables read-only.
SonetPathDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1
sonetPathDefaultThresholdDirectionThe digital signal direction for which the default threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.1
sonetPathDefaultThresholdRateThe path digital signal rate for which the default threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.2
sonetPathDefaultCVThresholdThe default value for SONET CV-P and CV-PFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.3
sonetPathDefaultESThresholdThe default value for SONET ES-P and ES-PFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.4
sonetPathDefaultSESThresholdThe default value for SONET SES-P and SES-PFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.7
sonetPathDefaultUASThresholdThe default value for SONET UAS-P and UAS-PFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.8
sonetPathDefaultDayCVThresholdThe default value for SONET CV-P and CV-PFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.16
sonetPathDefaultDayESThresholdThe default value for SONET ES-P and ES-PFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.17
sonetPathDefaultDaySESThresholdThe default value for SONET SES-P and SES-PFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.20
sonetPathDefaultDayUASThresholdThe default value for SONET UAS-P and UAS-PFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.1.1.21
sonetPathThresholdTableThe table of trap threshold values for SONET Path counters.
SEQUENCE OF SonetPathThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.2
sonetPathThresholdEntryAn entry in the table of SONET Path trap thresholds.
SonetPathThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1
sonetPathThresholdDirectionThe digital signal direction for which the threshold values apply.ro
Enumeration
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.1
sonetPathCurrentCVThresholdThe trap threshold value for the interface's current 15-minute interval CV-P and CV-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.2
sonetPathCurrentESThresholdThe trap threshold value for the interface's current 15-minute interval ES-P and ES-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.3
sonetPathCurrentSESThresholdThe trap threshold value for the interface's current 15-minute interval SES-P and SES-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.4
sonetPathCurrentUASThresholdThe trap threshold value for the interface's current 15-minute interval UAS-P and UAS-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.5
sonetPathDayCVThresholdThe trap threshold value for the interface's current 1-day CV-P and CV-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.6
sonetPathDayESThresholdThe trap threshold value for the interface's current 1-day ES-P and ES-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.7
sonetPathDaySESThresholdThe trap threshold value for the interface's current 1-day SES-P and SES-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.8
sonetPathDayUASThresholdThe trap threshold value for the interface's current 1-day UAS-P and UAS-PFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.2.1.9
sonetPathDayTableThe SONET Path Day table. Contains performance statistics collected by each SONET Path over multiple 1-day intervals of operation.
SEQUENCE OF SonetPathDayEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.17
sonetPathDayEntryAn entry in the SONET Path Day table.
SonetPathDayEntry
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1
sonetPathDayNumberA number which identifies the 1-day interval for which the set of near-end path related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.1
sonetPathDayStartTimeThis variable indicates the date and time at which the 1-day interval of measurements began on this interface.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.2
sonetPathDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.3
sonetPathDayCVsThe path code violation (CV-P) count is the number of BIP-8 errors which were detected at the STS-path layer interface in a previous 1-day interval. CVs for the path layer are collected using the BIP-8 in the B3 byte located in the STS-path overhead.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.5
sonetPathDayESsThe path errored second (ES-P) count is the number of 1-second intervals containing one or more EDC error (B3 byte), or one or more AIS-P, LOP-P, TIM-P or UNEQ-P defects which were encountered by the SONET path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.6
sonetPathDaySESsThe path severely errored second (SES-P) is a count of 1-second intervals containing sonetSevereErrorThreshold or more EDC error (B3 byte), or one or more AIS-P, LOP-P, TIM-P or UNEQ-P defects which were encountered by the SONET path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.9
sonetPathDayUASsThe path unavailable second (UAS-P) is a count of 1-second intervals for which the SONET STS-path was unavailable during a previous 1-day interval. The SONET STS-path becomes unavailable at the onset of 10 contiguous SES-Ps. The 10 SES-Ps are included in unavailable time. Once unavailable, the SONET STS-path becomes available at the onset of 10 contiguous seconds with no SES-Ps. The 10 seconds with no SES-Ps are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.10
sonetPathDayFCsThe number path failures count during a day.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.11
sonetPathDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.12
sonetPathDayEBsThe number path blocks in which one or more bits are in error counted during a day.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.13
sonetPathDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.14
sonetSupFarEndPath
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.2.2
sonetFarEndPathDayTableThe SONET Far End Path Day table. Contains various statistics collected by each SONET Far End Path over multiple 1-day intervals of operation.
SEQUENCE OF SonetFarEndPathDayEntry
.1.3.6.1.4.1.4515.1.6.3.2.2.3
sonetFarEndPathDayEntryAn entry in the SONET Far End Path Day table.
SonetFarEndPathDayEntry
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1
sonetFarEndPathDayNumberA number which identifies the 1-day interval for which the set of far-end path related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.1
sonetFarEndPathDayStartTimeThis variable indicates the date and time at which the current interval of measurements began.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.2
sonetFarEndPathDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing (e.g., when a near-end defect prevents some far-end data from being collected).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.3
sonetFarEndPathDayCVsThe far-end path code violation (CV-PFE) count is the number of REI-Ps (bit 1-4 in G1 byte) which were detected at the SONET STS-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.5
sonetFarEndPathDayESsThe far-end path errored second (ES-PFE) count is the number of 1-second intervals containing one or more REDC-P, or one or more RDI-P, ERDI-P server or ERDI-P connectivity defects which were encountered by the SONET STS-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.6
sonetFarEndPathDaySESsThe far-end path severely errored second (SES-PFE) is a count of 1-second intervals containing sonetSevereErrorThreshold or more REDC-Ps or one or more RDI-P, ERDI-P server or ERDI-P connectivity defects which were detected by the SONET STS-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.9
sonetFarEndPathDayUASsThe far-end path unavailable second (UAS-PFE) is a count of 1-second intervals for which the SONET STS-path was unavailable during a previous 1-day interval. The SONET STS-path becomes unavailable at the onset of 10 contiguous SES-PFEs. The 10 SES-PFEs are included in unavailable time. Once unavailable, the SONET STS-path becomes available at the onset of 10 contiguous seconds with no SES-PFEs. The 10 seconds with no SES-PFEs are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.10
sonetFarEndPathDayFCsThe far-end path failures count.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.11
sonetFarEndPathDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.12
sonetFarEndPathDayEBsThe count of far-end path blocks in which one or more bits are in error.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.13
sonetFarEndPathDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.2.2.3.1.14
sonetSupObjectsVT
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.3
sonetSupVT
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.3.1
sonetVTDefaultThresholdTableThe table of default thresholds for SONET Path counters.
SEQUENCE OF SonetVTDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.1
sonetVTDefaultThresholdEntryAn entry in the table of default thresholds. The table has a variable for each counter type and accumulation period combination, but uses indexes to indetify the digital signal direction and rate. The agent must provide a set of default threshold values for all rates that the NE supports. The agent may make these variables read-only.
SonetVTDefaultThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1
sonetVTDefaultThresholdDirectionThe digital signal direction for which the default threshold values apply.
Enumeration
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.1
sonetVTDefaultThresholdRateThe path digital signal rate for which the default threshold values apply.
Enumeration
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.2
sonetVTDefaultCVThresholdThe default value for SONET CV-V and CV-VFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.3
sonetVTDefaultESThresholdThe default value for SONET ES-V and ES-VFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.4
sonetVTDefaultSESThresholdThe default value for SONET SES-V and SES-VFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.5
sonetVTDefaultUASThresholdThe default value for SONET UAS-V and UAS-VFE counter 15-minute interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.6
sonetVTDefaultDayCVThresholdThe default value for SONET CV-V and CV-VFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.7
sonetVTDefaultDayESThresholdThe default value for SONET ES-V and ES-VFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.8
sonetVTDefaultDaySESThresholdThe default value for SONET SES-V and SES-VFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.9
sonetVTDefaultDayUASThresholdThe default value for SONET UAS-V and UAS-VFE counter 1-day interval thresholds.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.1.1.10
sonetVTThresholdTableThe table of trap threshold values for SONET Path counters.
SEQUENCE OF SonetVTThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.2
sonetVTThresholdEntryAn entry in the table of SONET Path trap thresholds.
SonetVTThresholdEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1
sonetVTCurrentCVThresholdThe trap threshold value for the interface's current 15-minute interval CV-V and CV-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.1
sonetVTCurrentESThresholdThe trap threshold value for the interface's current 15-minute interval ES-V and ES-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.2
sonetVTCurrentSESThresholdThe trap threshold value for the interface's current 15-minute interval SES-V and SES-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.3
sonetVTCurrentUASThresholdThe trap threshold value for the interface's current 15-minute interval UAS-V and UAS-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.4
sonetVTDayCVThresholdThe trap threshold value for the interface's current 1-day CV-V and CV-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.5
sonetVTDayESThresholdThe trap threshold value for the interface's current 1-day ES-V and ES-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.6
sonetVTDaySESThresholdThe trap threshold value for the interface's current 1-day SES-V and SES-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.7
sonetVTDayUASThresholdThe trap threshold value for the interface's current 1-day UAS-V and UAS-VFE counters. A value of zero indicates that the default threshold value is to be used.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.2.1.8
sonetVTDayTableThe SONET Path Day table. Contains performance statistics collected by each SONET Path over multiple 1-day intervals of operation.
SEQUENCE OF SonetVTDayEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.17
sonetVTDayEntryAn entry in the SONET Path Day table.
SonetVTDayEntry
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1
sonetVTDayNumberA number which identifies the 1-day interval for which the set of near-end path related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.1
sonetVTDayStartTimeThis variable indicates the date and time at which the 1-day interval of measurements began on this interface.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.2
sonetVTDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.3
sonetVTDayFCsThe near-end path failure count (FC-V) is the number of occurences of near-end path failure events encountered by the SONET path layer interface in a previous 1-day interval. A near-end path failure event begins when the first of any of LOP-V, AIS-V or UNEQ-V failures is declared; a near-end path failure event ends when all LOP-V, AIS-V and UNEQ-V failures have cleared.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.4
sonetVTDayCVsThe path code violation (CV-V) count is the number of BIP-2 errors which were detected at the VT-path layer interface in a previous 1-day interval. CVs for the path layer are collected using the BIP-2 in the V5 byte located in the VT-path overhead.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.5
sonetVTDayESsThe path errored second (ES-V) count is the number of 1-second intervals containing one or more EDC error (V5 byte), or one or more AIS-V, LOP-V or UNEQ-V defects which were encountered by the SONET path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.6
sonetVTDaySESsThe path severely errored second (SES-V) is a count of 1-second intervals containing sonetSevereErrorThreshold or more EDC error (V5 byte), or one or more AIS-V, LOP-V or UNEQ-V defects which were encountered by the SONET path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.7
sonetVTDayUASsThe path unavailable second (UAS-V) is a count of 1-second intervals for which the SONET VT-path was unavailable during a previous 1-day interval. The SONET VT-path becomes unavailable at the onset of 10 contiguous SES-Vs. The 10 SES-Vs are included in unavailable time. Once unavailable, the SONET VT-path becomes available at the onset of 10 contiguous seconds with no SES-Vs. The 10 seconds with no SES-Vs are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.8
sonetVTDayEBsThe number VT path blocks in which one or more bits are in error counted during a day.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.9
sonetVTDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.10
sonetVTDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.1.17.1.11
sonetSupFarEndVT
OBJECT IDENTIFIER
.1.3.6.1.4.1.4515.1.6.3.3.2
sonetFarEndVTDayTableThe SONET Far End Path Day table. Contains various statistics collected by each SONET Far End Path over multiple 1-day intervals of operation.
SEQUENCE OF SonetFarEndVTDayEntry
.1.3.6.1.4.1.4515.1.6.3.3.2.3
sonetFarEndVTDayEntryAn entry in the SONET Far End Path Day table.
SonetFarEndVTDayEntry
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1
sonetFarEndVTDayNumberA number which identifies the 1-day interval for which the set of far-end VT-path related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.ro
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.1
sonetFarEndVTDayStartTimeThis variable indicates the date and time at which the current interval of measurements began.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.2
sonetFarEndVTDayValidDataThis variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete or otherwise invalid because (a) the data stored for this interval is for a period greater or less than 24 hours, or (b) some data is missing (e.g., when a near-end defect prevents some far-end data from being collected).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.3
sonetFarEndVTDayFCsThe far-end path failure count (FC-VFE) is the number of occurences of far-end path failure events detected by the SONET VT-path layer interface in a previous 1-day interval. A far-end path failure event begins when the first of any remote failure indication (RFI-V, RFI-V server, or RFI-V connectivity) failure is declared; a far-end path failure event ends when all RFI-V, RFI-V server, or RFI-V connectivity failures are cleared.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.4
sonetFarEndVTDayCVsThe far-end path code violation (CV-VFE) count is the number of REI-Vs (bit 1-4 in G1 byte) which were detected at the SONET VT-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.5
sonetFarEndVTDayESsThe far-end path errored second (ES-VFE) count is the number of 1-second intervals containing one or more REDC-V, or one or more RDI-V, ERDI-V server or ERDI-V connectivity defects which were encountered by the SONET VT-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.6
sonetFarEndVTDaySESsThe far-end path severely errored second (SES-VFE) is a count of 1-second intervals containing sonetSevereErrorThreshold or more REDC-Vs or one or more RDI-V, ERDI-V server or ERDI-V connectivity defects which were detected by the SONET VT-path layer interface in a previous 1-day interval.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.7
sonetFarEndVTDayUASsThe far-end path unavailable second (UAS-VFE) is a count of 1-second intervals for which the SONET VT-path was unavailable during a previous 1-day interval. The SONET VT-path becomes unavailable at the onset of 10 contiguous SES-VFEs. The 10 SES-VFEs are included in unavailable time. Once unavailable, the SONET VT-path becomes available at the onset of 10 contiguous seconds with no SES-VFEs. The 10 seconds with no SES-VFEs are excluded from unavailable time.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.8
sonetFarEndVTDayEBsThe number VT path blocks in which one or more bits are in error counted during a day detected by the Far End.ro
PerfTotalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.9
sonetFarEndVTDayTcaFlagTRUE if one of the counters crossed the threshold during the day.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.10
sonetFarEndVTDayResetWriting this object reset the PM counters of this interval.rw
INTEGER
.1.3.6.1.4.1.4515.1.6.3.3.2.3.1.11
SL-SONET-SUP-PM-MIB - SNMP MIB Reference | MIBs Explorer