SL-PM-MIB
This PM module
Main OID:
slPmMib.1.3.6.1.4.1.4515.1.3.25
29
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
slPmMibThis PM module MODULE-IDENTITY .1.3.6.1.4.1.4515.1.3.25 |
slPmIntervals OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.25.1 |
slPmIntervalTableThe PM Interval table. SEQUENCE OF SlPmIntervalEntry .1.3.6.1.4.1.4515.1.3.25.1.1 |
slPmIntervalEntryAn entry in the PM Interval table. SlPmIntervalEntry .1.3.6.1.4.1.4515.1.3.25.1.1.1 |
slPmTypeThe PM type SlPmType .1.3.6.1.4.1.4515.1.3.25.1.1.1.1 |
slPmDirectionTypeThe PM direction near-end/far-end. SlPmDirectionType .1.3.6.1.4.1.4515.1.3.25.1.1.1.2 |
slPmIntervalTypeThe type of the PM interval 15min/day SlPmIntervalType .1.3.6.1.4.1.4515.1.3.25.1.1.1.3 |
slPmIntervalNumberA number between 1 to 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.4.1.4515.1.3.25.1.1.1.4 |
slPmIntervalCVsThe counter associated with the number of Coding
Violations encountered in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.5 |
slPmIntervalESsThe counter associated with the number of
Errored Seconds encountered
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.6 |
slPmIntervalSESsThe counter associated with the number of
Severely Errored Seconds encountered in a
particular 15-minute interval in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.7 |
slPmIntervalSEFSsThe counter associated with the number of
Severely Errored Framing Seconds
encountered in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.8 |
slPmIntervalUASsThe counter associated with the number of
Unavailable Seconds encountered in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.9 |
slPmIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.25.1.1.1.10 |
slPmIntervalTcaFlagTRUE if one of the counters crossed the threshold during the 15 minutes interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.25.1.1.1.11 |
slPmIntervalResetWriting to this object reset the PM counters in this interval.rw INTEGER .1.3.6.1.4.1.4515.1.3.25.1.1.1.12 |
slPmIntervalStartTimeThis variable indicates the date and time at which this
interval of measurements began on this interface.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.25.1.1.1.13 |
slPmServiceTypeThis variable indicates the XPDR service type of the port
during the PM interval.ro XpdrServiceType (SL-XPDR-MIB) .1.3.6.1.4.1.4515.1.3.25.1.1.1.14 |
slPmL2Intervals OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.25.2 |
slPmL2TableThe Layer 2 PM table. SEQUENCE OF SlPmL2Entry .1.3.6.1.4.1.4515.1.3.25.2.1 |
slPmL2EntryAn entry in the Layer 2 PM table. SlPmL2Entry .1.3.6.1.4.1.4515.1.3.25.2.1.1 |
slPmL2CounterTypeThe PM Layer 2 counter type SlPmL2Type .1.3.6.1.4.1.4515.1.3.25.2.1.1.1 |
slPmL2IntervalTypeThe type of the PM interval 15min/day SlPmIntervalType .1.3.6.1.4.1.4515.1.3.25.2.1.1.2 |
slPmL2IntervalNumberA number between 1 to 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.4.1.4515.1.3.25.2.1.1.3 |
slPmL2CountThe counter associated with the number of Coding
Violations encountered in a particular 15-minute interval
in the past 24 hours.ro Counter64 .1.3.6.1.4.1.4515.1.3.25.2.1.1.4 |
slPmL2ValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.25.2.1.1.5 |
slPmL2ResetWriting to this object reset the PM counters in this interval.rw INTEGER .1.3.6.1.4.1.4515.1.3.25.2.1.1.6 |
slPmL2StartTimeThis variable indicates the date and time at which this
interval of measurements began on this interface.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.25.2.1.1.7 |
slPmL2ServiceTypeThis variable indicates the XPDR service type of the port
during the PM interval.ro XpdrServiceType (SL-XPDR-MIB) .1.3.6.1.4.1.4515.1.3.25.2.1.1.8 |