S5-ETHERNET-TRAP-MIB
Standard SNMP MIB module defining data structures for S5-ETHERNET-TRAP-MIB.
Imported Objects
Objects
7 total| Object Name |
|---|
IMPORTSA port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.1 |
s5EtrPortDteJabberingAn ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.2 |
s5EtrRedPortFailureA port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.3 |
s5EtrRedBadRemCfgDetectedThis trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.4 |
s5EtrSbsMacAccessViolationThis trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address trigers this violation TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.5 |
s5EtrMgmAccessViolationThis trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.6 |
s5EtrPortManualPartA port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port. TRAP-TYPE .1.3.6.1.4.1.45.1.6.2.1.0.7 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.