S5-CHASSIS-MIB
AI MIB Summary
The S5-CHASSIS-MIB provides SNMP-based management and monitoring of physical chassis components, including power supplies, fans, and temperature sensors, specifically for Nortel Networks 5000 series switching hardware. It enables the retrieval of hardware status, fault detection, and environmental telemetry required for maintaining the operational integrity of these legacy network platforms.
5000 Chassis MIB
Copyright 1995-2012 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions.
This Specification is supplied 'AS IS', and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
s5ChasMib.1.3.6.1.4.1.45.1.6.3.10
152
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
152 total| Object Name |
|---|
s5ChasGen OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.1 |
s5ChasTypeThe chassis type. This is 'what kind of
box' is being managed. The values are
defined under s5ChasTypeVal in the
Registration MIB.ro OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.1.1 |
s5ChasDescrA description of the chassis.
The value is a zero length string
if no information is available.ro DisplayString .1.3.6.1.4.1.45.1.6.3.1.2 |
s5ChasLocationThe physical location of the chassis
(e.g., 'fourth floor wiring closet in
building A'). The value is a zero
length string if no information
is available. Note: this object is
different from sysLocation in MIB-II.
However, an agent may use this value for
sysLocation if none is configured in the
the agent.rw DisplayString .1.3.6.1.4.1.45.1.6.3.1.3 |
s5ChasContactThe textual identification of the
contact person for the chassis, together
with information on how to contact
this person. The value is a zero length
string if no information is available.
Note: this object is different from sysContact
in MIB-II. However, an agent may use this value
for sysContact if none is configured in the
agent.rw DisplayString .1.3.6.1.4.1.45.1.6.3.1.4 |
s5ChasVerThe version of the chassis in the form
'major.minor.maintenance[letters]'. If the
version is unknown or not available then
the value should be a zero length string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.1.5 |
s5ChasSerNumThe serial number of the chassis. If the
serial number is unknown or unavailable then
the value should be a zero length string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.1.6 |
s5ChasGblPhysChngsThe total number of physical changes (i.e.,
an addition or removal of a component or
sub-component) that have been detected in the
chassis since cold/warm start of the agent.ro Counter32 .1.3.6.1.4.1.45.1.6.3.1.7 |
s5ChasGblPhysLstChngThe value of sysUpTime when the last
physical change (i.e., addition or
removal of a module or sub-module) was
detected in the chassis. If none have
been detected since cold/warm start of
the agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.1.8 |
s5ChasGblAttChngsThe total number of attachment changes
across all boards in the chassis that have
been detected since cold/warm start of
the agent.ro Counter32 .1.3.6.1.4.1.45.1.6.3.1.9 |
s5ChasGblAttLstChngThe value of sysUpTime when the last
attachment change on any board in the chassis
was detected. If none have been detected
since cold/warm start of the agent, then the
value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.1.10 |
s5ChasGblConfChngsThe total number of configuration changes
(other than attachment changes, or physical
additions or removals) across all boards in
the chassis that have been detected since
cold/warm start of the agent.ro Counter32 .1.3.6.1.4.1.45.1.6.3.1.11 |
s5ChasGblConfLstChngThe value of sysUpTime when the last
configuration change (other than attachment
changes, or physical additions or removals)
on any board in the chassis was detected.
If none have been detected since cold/warm
start of the agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.1.12 |
s5ChasGrp OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.2 |
s5ChasGrpTableA table that contains information about
each group that can contain chassis
components. SEQUENCE OF S5ChasGrpEntry .1.3.6.1.4.1.45.1.6.3.2.1 |
s5ChasGrpEntryA row in the group table.
Rows can not be created or deleted via
SNMP requests. The number of entries
is determined by the physical construction
of the chassis. S5ChasGrpEntry .1.3.6.1.4.1.45.1.6.3.2.1.1 |
s5ChasGrpIndxThe index of the group.ro Integer32 .1.3.6.1.4.1.45.1.6.3.2.1.1.1 |
s5ChasGrpTypeThe type of the group. The group type
determines the types of items that can
be plugged into the positions in the
group. The groups are defined under
s5ChasGrpTypeVal in the Registration MIB.ro OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.2.1.1.2 |
s5ChasGrpDescrThe description of the group. If not
available, the value is a zero length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.2.1.1.3 |
s5ChasGrpMaxEntsThe maximum number of entries
in the group. If not available, a
value of -1 is returned.ro Integer32 (-1..32767) .1.3.6.1.4.1.45.1.6.3.2.1.1.4 |
s5ChasGrpNumEntsThe current number of entries
in the group. If not available,
a value of -1 is returned.ro Integer32 (-1..32767) .1.3.6.1.4.1.45.1.6.3.2.1.1.5 |
s5ChasGrpPhysChngsThe total number of physical changes (i.e.,
an addition or removal of a component or
sub-component) that have been detected in
the group since cold/warm start of the agent.ro Counter32 .1.3.6.1.4.1.45.1.6.3.2.1.1.6 |
s5ChasGrpPhysLstChngThe value of sysUpTime that the last
physical change (i.e., addition or
removal of a module or sub-module) was
detected in the group. If none have been
detected since cold/warm start of the
agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.2.1.1.7 |
s5ChasGrpEncodeFactorThe multiplication factor used in encoding
the component index of a component in the group.
The component index for any group should be
determined in conjunction with this object for
that group. A value of 1 indicates 'no encoding'.
Stackable platforms:
The component index is encoded using the
following formula:
Component Index =
(Unit# * s5ChasGrpEncodeFactor) + Module#
Where: Unit# is obtained from s5ChasComIndx
for the Unit Group, and Module# is the
module number in a unit starting from 1
and increases in a left-to-right and
bottom-to-top fashion.
NonStackable platforms:
These NMMs like 5310, 5510 will always return a
value of 1 for this object. Encoding/decoding
should not be performed in this case.ro Integer32 .1.3.6.1.4.1.45.1.6.3.2.1.1.8 |
s5ChasCom OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.3 |
s5ChasComTableA table that contains information
about each chassis level component
and sub-component. SEQUENCE OF S5ChasComEntry .1.3.6.1.4.1.45.1.6.3.3.1 |
s5ChasComEntryA row in the component/sub-component
table. Rows can not be created or
deleted via SNMP requests. Entries are
created and deleted when components or
sub-components are inserted or removed
from the chassis. S5ChasComEntry .1.3.6.1.4.1.45.1.6.3.3.1.1 |
s5ChasComGrpIndxThe index of the chassis level group which
contains this component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.1 |
s5ChasComIndxThe index of the component in the group.
For example, for modules in the 'board'
group, this is the slot number.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.2 |
s5ChasComSubIndxIf this table entry (i.e. table row)
describes a component, then the value is
zero. Otherwise, this table entry describes
a sub-component and this is the index of
the sub-component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.3 |
s5ChasComTypeThe type of component/sub-component. The
values are defined under s5ChasComTypeVal
in the Registration MIB.ro OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.3.1.1.4 |
s5ChasComDescrA description of the component/sub-component.
If not available, the value is a zero length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.3.1.1.5 |
s5ChasComVerThe version number of the component/sub-component.
If not available, the value is a zero length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.3.1.1.6 |
s5ChasComSerNumThe serial number of the component/sub-component.
If not available, the value is a zero length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.3.1.1.7 |
s5ChasComLstChngThe value of sysUpTime when it was
detected that the component/sub-component
was added to the chassis. If this has not
occurred since the cold/warm start of the
agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.3.1.1.8 |
s5ChasComAdminStateThe desired state of the component/sub-component.
The values that are read-only are:
other(1)......currently in some other state
notAvail(2)...actual value is not available
The possible values that can be read and
written are:
disable(3)...disable operation
enable(4)....enable operation
reset(5).....reset component
test(6)......start self test of component, with
the result to be normal(5),
warning(8), nonFatalErr(9),
or fatalErr(10) in object
s5ChasComOperState
The allowable (and meaningful) values
are determined by the component type.rw Enumeration .1.3.6.1.4.1.45.1.6.3.3.1.1.9 |
s5ChasComOperStateThe current operational state of the
component. The possible values are:
other(1).........some other state
notAvail(2)......state not available
removed(3).......component removed
disabled(4)......operation disabled
normal(5)........normal operation
resetInProg(6)...reset in progress
testing(7).......doing a self test
warning(8).......operating at warning level
nonFatalErr(9)...operating at error level
fatalErr(10).....error stopped operation
notConfig(11)....module needs to be configured
obsoleted(12)...module is obsoleted but in the chassis
The allowable (and meaningful) values
are determined by the component type.ro Enumeration .1.3.6.1.4.1.45.1.6.3.3.1.1.10 |
s5ChasComMaxSubsThe potential number of sub-components
that can be attached to the component.
A value of zero means none. A value of -1
indicates that no component information is
available. The actual number of
installed sub-components is found in
s5ChasComNumSubs.
If this entry is a sub-component, then
this object has a value of zero.ro Integer32 (-1..32767) .1.3.6.1.4.1.45.1.6.3.3.1.1.11 |
s5ChasComNumSubsThe actual number of sub-components that
are attached to the component. A value of
zero means none. A value of -1 indicates
that no component information is available.
The potential number of sub-components
that can be installed is found in
s5ChasComMaxSubs.
If this entry is a sub-component, then
this object has the value of zero.ro Integer32 (-1..32767) .1.3.6.1.4.1.45.1.6.3.3.1.1.12 |
s5ChasComRelPosThis object describes the position of
each component in the unit group relative
to each other. Components in the unit group
are numbered in the ascending order with the
uppermost component being numbered one. The
value of this object should never be greater
than the value of s5ChasGrpMaxEnts. If not
available, a value of zero will be returned.
Note: This object is only implemented in
agents that support 'virtual' chassis.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.13 |
s5ChasComLocationThis object provides geographic location
information of a component in a system
modeled as a chassis, but possibly physically
implemented with geographically separate devices
connected together to exchange managment information.
Chassis' modeled in this manner are sometimes refered
to as 'virtual chassis'. An example value is:
'4th flr wiring closet in blg A'.
Notes: 1.) This object is applicable only to
components that can be found in either
the Board or Unit groups. If the
information is unavailable (i.e., not
modeling a virtual chassis or component
is not in Board or Unit group), the value
is a zero length string.
2.) If this object is applicable and is not
assigned a value via a SNMP SET PDU when
the row is created, the value will default
to the value of the object s5ChasComSerNum.rw DisplayString .1.3.6.1.4.1.45.1.6.3.3.1.1.14 |
s5ChasComGroupMapThis object describes the group mapping of
each component in the chassis. For the
components in the unit group, the value of this
object should be the backplane number to which the
unit is connected. The value of this object should
never be greater than the value of s5ChasGrpMaxEnts.
If not available, a value of zero should be returned.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.15 |
s5ChasComBaseNumPortsThis object indicates the number of ports (of any type)
contained in a component, not including any sub-components
contained within the component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.16 |
s5ChasComTotalNumPortsThis object indicates the total number of ports (of
any type) contained in a component, including any ports
contained in sub-components contained within the component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.17 |
s5ChasComIpAddressThe IP address of a component. For components that do not
have an IP address/stack, this value should always be 0.0.0.0.
Note that for a stackable system in stack mode, this will be
the standalone IP address for individual units in the stack.rw IpAddress .1.3.6.1.4.1.45.1.6.3.3.1.1.18 |
s5ChasComRunningSoftwareVerThe version number of the software image running on this
component/sub-component.
If not available, the value is a zero length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.3.1.1.19 |
s5ChasComIpv6AddressThe IPv6 address of a component. For components that do not
have an IPv6 address/stack, this value should always be 0::0.
Note that for a stackable system in stack mode, this will be
the standalone IPv6 address for individual units in the stack.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.45.1.6.3.3.1.1.20 |
s5ChasComIpv6NetMaskThe IPv6 netmask of a component. For components that do not
have an IPv6 address/stack, this value should always be 0::0.
Note that for a stackable system in stack mode, this will be
the standalone IPv6 netmask for individual units in the stack.rw Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.45.1.6.3.3.1.1.21 |
s5ChasComIpMgmtAddressThe IP address associated with the physical dedicated
management port (out of band management port) of a component. For
components that do not have an IP address/stack associated with the
dedicated management port, this value should always be 0.0.0.0.
Note that for a stackable system in stack mode, this IP address
always applies to individual units in the stack.rw IpAddress .1.3.6.1.4.1.45.1.6.3.3.1.1.22 |
s5ChasComIpMgmtNetMaskThe IP netmask associated with the physical dedicated
management port (out of band management port) of a component. For
components that do not have an IP address/stack associated with the
dedicated management port, this value should always be 0.0.0.0.
Note that for a stackable system in stack mode, this netmask
always applies to individual units in the stack.rw IpAddress .1.3.6.1.4.1.45.1.6.3.3.1.1.23 |
s5ChasComIpMgmtGatewayThe IP address of the default gateway associated with the
physical dedicated management port (out of band management port)
of a component. For components that do not have an IP address/stack
associated with the dedicated management port, this value should
always be 0.0.0.0.
Note that for a stackable system in stack mode, this IP address
always applies to individual units in the stack.rw IpAddress .1.3.6.1.4.1.45.1.6.3.3.1.1.24 |
s5ChasComIpv6MgmtAddressThe IPv6 address associated with the physical dedicated
management port (out of band management port) of a component.
Note that for a stackable system in stack mode, this IP address
always applies to individual units in the stack.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.45.1.6.3.3.1.1.25 |
s5ChasComIpv6MgmtNetMaskThe IPv6 netmask associated with the physical dedicated
management port (out of band management port) of a component.
Note that for a stackable system in stack mode, this netmask
always applies to individual units in the stack.rw Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.45.1.6.3.3.1.1.26 |
s5ChasComIpMgmtLimitThis object indicates the in-bound packet threshold rate
for the management port (out of band management port).rw Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.27 |
s5ChasComIpMgmtTimeoutThis object indicates the port shutdown period
for the management port (out of band management port).rw Integer32 .1.3.6.1.4.1.45.1.6.3.3.1.1.28 |
s5ChasComIpMgmtShutdownThis object is used to control whether the out of band management
port is up or down (false for port up and true for port down).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.3.1.1.29 |
s5ChasComUpTimeThe time (in hundredths of a second)
since the unit was initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.3.1.1.30 |
s5ChasBrd OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.4 |
s5ChasBrdTableA table containing information about each
board that can be inserted into a slot.
These include boards such as Repeater Modules
and Network Management Modules. SEQUENCE OF S5ChasBrdEntry .1.3.6.1.4.1.45.1.6.3.4.1 |
s5ChasBrdEntryA row in the board table. Entries can not
be created or deleted via SNMP. Entries are
created and deleted when boards are inserted
or removed from slots in the chassis. S5ChasBrdEntry .1.3.6.1.4.1.45.1.6.3.4.1.1 |
s5ChasBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro Integer32 .1.3.6.1.4.1.45.1.6.3.4.1.1.1 |
s5ChasBrdLedsA bit array that contains the value of the
front panel LEDs and the annunciator. This is
a packed bit string; each LED is encoded into
4 bits (a nibble). The first nibble is stored
in the high order bits of the first octet. The
second nibble is stored in the low order bits
the first octet, etc. However, the current
mapping is that the first three nibbles are
reserved, the fourth nibble has the value of
the 'annunciator', and the 'normal' LEDs start
with the fifth nibble. If the LED values are not
available, a zero length string is returned. The
following shows the meaning of each bit (bit 0 is
the least significant bit) when it has a value
of one:
bit meaning
-
0 green light
1 yellow light
2 blinking
3 reservedro OCTET STRING .1.3.6.1.4.1.45.1.6.3.4.1.1.2 |
s5ChasBrdNumAttThe total number of backplane network
attachment points on the board.
This may vary based on the mode of the
board for FDDI.ro Integer32 .1.3.6.1.4.1.45.1.6.3.4.1.1.3 |
s5ChasBrdAttChngsThe total number of attachment changes
for the board that have been detected since
cold/warm start of the agent or since
the board was inserted.ro Counter32 .1.3.6.1.4.1.45.1.6.3.4.1.1.4 |
s5ChasBrdAttLstChngThe value of sysUpTime when the last
attachment change on the board
has detected. If none have been detected
since cold/warm start of the agent, then
the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.4.1.1.5 |
s5ChasBrdStatusDsplyThe current ASCII character display of
the board. The length returned should
match the length of the display.
Boards with multiple displays should
return the values concatenated together.
Boards with no display hardware should
return a zero length string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.4.1.1.6 |
s5ChasBrdDateCodeThe date of manufacture of the board
in ASCII in the format: YYYYmmdd. For
example, the value for April 13, 1993
is 19930413. If not available, the
value is a zero-length string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.4.1.1.7 |
s5ChasBrdCfgSrcThe source of the configuration
at the last board reset. The values
are:
other(1)........unknown or some other value
dfltJmpr(2).....default jumpers
prmMem(3).......permanent memory on board
brdCfg(4).......saved configuration on board
sm(5)...........supervisor
smDfltJmpr(6)...SM and default jumpers
smPrmMem(7).....SM and permanent memory on board
smBrdCfg(8).....SM and saved configuration on boardro Enumeration .1.3.6.1.4.1.45.1.6.3.4.1.1.8 |
s5ChasBrdCfgChngsThe total number of configuration
changes for the board that have been
detected since cold/warm start of the
agent or since the board was inserted.ro Counter32 .1.3.6.1.4.1.45.1.6.3.4.1.1.9 |
s5ChasBrdFanLedsA bit array that contains the value of the
front panel LEDs of the fan trays. This is
a packed bit string; each LED is encoded into
4 bits (a nibble). The first nibble is stored
in the high order bits of the first octet. The
second nibble is stored in the low order bits
of the first octet etc. The current mapping is
that the first four nibbles are reserved,
the fifth nibble has the value of the
'annunciator', and the 'normal' LEDs start with
the sixth nibble. If the LED values are not
available, a zero length string is returned. The
following shows the meaning of each bit (bit 0 is
the least significant bit) when it has a value
of one:
bit meaning
-
0 red light
1 blue light
2 purple light
3 blinking
4 reservedro OCTET STRING .1.3.6.1.4.1.45.1.6.3.4.1.1.10 |
s5ChasAttTableA table containing information about each
backplane attachment point on a board.
The number of entries for a board is the
value of s5ChasBrdNumAtt. SEQUENCE OF S5ChasAttEntry .1.3.6.1.4.1.45.1.6.3.4.2 |
s5ChasAttEntryA row in the attachment point table.
Entries can not be created or deleted
via SNMP. Entries are created and deleted
when boards are inserted or removed from
slots in the chassis, or the number of
attachment points is changed. S5ChasAttEntry .1.3.6.1.4.1.45.1.6.3.4.2.1 |
s5ChasAttBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro Integer32 .1.3.6.1.4.1.45.1.6.3.4.2.1.1 |
s5ChasAttIndxThe index of the attachment point on
the board.ro Integer32 .1.3.6.1.4.1.45.1.6.3.4.2.1.2 |
s5ChasAttDfltAttThe default setting for the attachment
point. An attachment point may be attached
to a local channel, not attached to any
backplane network, or attached to a media
specific backplane network. (The valid choices
depend on each specific attachment point.)
NOTE: This value will always be valid
and may change when the backplane divider
switch setting is changed.ro AttId (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.3.4.2.1.3 |
s5ChasAttCurAttThe current setting for the attachment
point. The slot position of the board,
the setting of the backplane divider switch(es),
and the mode setting affect which backplane
networks are valid values. Also, some boards
may put limitations on which backplane
network(s) or local channel(s) may be used.rw AttId (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.3.4.2.1.4 |
s5ChasAttChngsThe total number of attachment changes
for the attachment point that have been
detected since cold/warm start of the agent.ro Counter32 .1.3.6.1.4.1.45.1.6.3.4.2.1.5 |
s5ChasAttLstChngThe value of sysUpTime when the last
attachment change for the attachment
point was detected. If none have been
detected since cold/warm start of the
agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.3.4.2.1.6 |
s5ChasAttClusterConnCapabilityA bit array that contains the bit map
representing all available backplane
segment and local segment connections for
the cluster. One bit is also reserved to
indicate if the cluster has an isolate
capability.
The first 31 bits of the array represent
the backplane numbers, starting from the
lower order bit. Bit 32 indicates whether
the Cluster has a null connection capability.
The bits in the fifth and sixth octets,
starting with bits in the lower order octet,
represent local segments that the cluster
can connect to.
A bit with a value of 1 means that the
cluster is capable of connecting to the
corresponding backplane segment, local segment
or null segment.ro OCTET STRING .1.3.6.1.4.1.45.1.6.3.4.2.1.7 |
s5ChasLocChanTableA table containing information about each
'dual mode' local channel on a board. SEQUENCE OF S5ChasLocChanEntry .1.3.6.1.4.1.45.1.6.3.4.3 |
s5ChasLocChanEntryA row in the local channel table.
Entries can not be created or deleted
via SNMP. Entries are added or removed
by adding or removing a board that has
a 'dual mode' local channel from a slot
in the chassis. S5ChasLocChanEntry .1.3.6.1.4.1.45.1.6.3.4.3.1 |
s5ChasLocChanBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro Integer32 .1.3.6.1.4.1.45.1.6.3.4.3.1.1 |
s5ChasLocChanIndxThe index of the local channel.ro LocChan (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.3.4.3.1.2 |
s5ChasLocChanBkplModeIndicates the attachment/isolation
mode of a local channel to a backplane
channel. The values that are read/write are:
connected(2)......connect local chan N to bkpl N
notConnected(3)...disconnect local chan N from bkpl
The possible values that can be read are:
other(1)..........unknown
connected(2)......local chan N connected to bkpl N
notConnected(3)...local chan N isolated from bkpl Nrw Enumeration .1.3.6.1.4.1.45.1.6.3.4.3.1.3 |
s5ChasStore OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.5 |
s5ChasStoreTableA table listing the storage areas
on each component/sub-component in
the chassis. The number is determined
by the components in the chassis
which have manageable storage areas.
Examples of storage areas include
RAM(main memory), FLASH, ROM,
EEPROM, etc. This does not include
disk drives. SEQUENCE OF S5ChasStoreEntry .1.3.6.1.4.1.45.1.6.3.5.1 |
s5ChasStoreEntryA row in the table of storage areas.
The entries can not be created or
deleted via SNMP requests. Only those
components/sub-components that have
storage areas that are installed are
present. Storage areas that are on
components have a sub-component
index value of zero. Storage areas that
are on sub-components have a non-zero
sub-component index value. S5ChasStoreEntry .1.3.6.1.4.1.45.1.6.3.5.1.1 |
s5ChasStoreGrpIndxThe index of the chassis level group
which contains the component or
sub-component containing the storage
area.ro Integer32 .1.3.6.1.4.1.45.1.6.3.5.1.1.1 |
s5ChasStoreComIndxThe index of the component or
the component which contains the
sub-component containing the
storage area.ro Integer32 .1.3.6.1.4.1.45.1.6.3.5.1.1.2 |
s5ChasStoreSubIndxIf the storage area is on a component,
then the value zero. Otherwise, the
storage area is on a sub-component and
this is the index of the sub-component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.5.1.1.3 |
s5ChasStoreIndxThe index of the storage area on the
component or sub-component.ro Integer32 .1.3.6.1.4.1.45.1.6.3.5.1.1.4 |
s5ChasStoreTypeThe storage area type on the containing
component/sub-component. The values
are defined under the .0 branch of the
value of s5ChasComType for the
component/sub-component containing the
storage area in the Registration MIB.ro OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.5.1.1.5 |
s5ChasStoreCurSizeThe current size of the storage
area in bytes. A value of zero
means the storage area is not installed
or not usable. A value of -1 indicates
that the size is unknown (or unavailable).ro Integer32 (-1..2147483647) .1.3.6.1.4.1.45.1.6.3.5.1.1.6 |
s5ChasStoreCntntVerThe version of the contents (i.e., the
code or data) of the storage area in the
form 'major.minor.maintenance[letters]'.
If not known or not available, then the value
is a zero length string. If multiple
contents are stored in this container, the
the value will contain multiple sub-versions,
each separated by a semicolon (;).ro DisplayString .1.3.6.1.4.1.45.1.6.3.5.1.1.7 |
s5ChasStoreFilenameName of the image file to be downloaded or
uploaded when the s5AgInfoFileAction object
is set to upload or download an image. When the
object is not used, the value is a zero-length
string.rw DisplayString .1.3.6.1.4.1.45.1.6.3.5.1.1.8 |
s5ChasStoreUsedSizeThe current size of the storage area that is currently in use,
measured in bytes. A value of zero means the storage area is
not in use. A value of -1 means the size is unknown
(or unavailable).ro Integer32 (-1..2147483647) .1.3.6.1.4.1.45.1.6.3.5.1.1.9 |
s5ChasStoreDescriptionA string describing the storage area. When the
object is not used, the value is a zero-length
string.ro DisplayString .1.3.6.1.4.1.45.1.6.3.5.1.1.10 |
s5ChasStoreAgeA counter of the number of writes performed on this storage
area which for areas residing in flash memory is an
indication of the flash memory age. This number is the maximum
number of writes for any of the access units (e.g. sector) from
the storage area. A value of zero means the storage area is
not in use. A value of -1 means the age is unknown
(or unavailable).ro Integer32 (-1..2147483647) .1.3.6.1.4.1.45.1.6.3.5.1.1.11 |
s5ChasSm OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.6 |
s5ChasSmLedsA bit array that contains the value of the
supervisor LEDs. (The format of these are the
same as the format for object s5ChasBrdLeds.)
If not available, a zero length string is
returned.ro OCTET STRING .1.3.6.1.4.1.45.1.6.3.6.1 |
s5ChasSmDateCodeThe date of manufacture of the SM module
in ASCII in the format: YYYYmmdd. For
example, the value for April 13, 1993
is 19930413. If not available, a zero
length string is returnedro DisplayString .1.3.6.1.4.1.45.1.6.3.6.2 |
s5ChasTmpSnr OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.7 |
s5ChasTmpSnrTableA table that contains temperature
sensor values. SEQUENCE OF S5ChasTmpSnrEntry .1.3.6.1.4.1.45.1.6.3.7.1 |
s5ChasTmpSnrEntryA row in the s5ChasTmpSnrTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
a temperature sensor. The values of the
indices of the row in this table will be
equal to those of the corresponding row in
the s5ChasComTable. S5ChasTmpSnrEntry .1.3.6.1.4.1.45.1.6.3.7.1.1 |
s5ChasTmpSnrGrpIndxThe index of the chassis level group which
contains this component, corresponds to
s5ChasComGrpIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.7.1.1.1 |
s5ChasTmpSnrIndxThe index of the component in the group.
Corresponds to s5ChasComIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.7.1.1.2 |
s5ChasTmpSnrSubIndxSub-component index. Corresponds to
s5ChasComSubIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.7.1.1.3 |
s5ChasTmpSnrValueThe current temperature value of the temperature
sensor. This is measured in units of a half degree
centigrade, e.g. a value of 121 indicates a temperature
of 60.5 degrees C.
This object is deprecated because it cannot represent
temperature values below 0, as Gauge32 is an unsigned type.rodeprecated Gauge32 .1.3.6.1.4.1.45.1.6.3.7.1.1.4 |
s5ChasTmpSnrTmpValueThe current temperature value of the temperature
sensor. This is measured in units of a half degree
centigrade, e.g. a value of 121 indicates a temperature
of 60.5 degrees C.ro Integer32 (-32768..32767) .1.3.6.1.4.1.45.1.6.3.7.1.1.5 |
s5ChasUtil OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.8 |
s5ChasUtilTableA table that contains CPU and memory utilization
information. SEQUENCE OF S5ChasUtilEntry .1.3.6.1.4.1.45.1.6.3.8.1 |
s5ChasUtilEntryA row in the s5ChasUtilTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
any chassis component for which CPU and/or
memory utilization values are available.
The values of the indices of a row in this
table will be equal to those of the
corresponding row in the s5ChasComTable. S5ChasUtilEntry .1.3.6.1.4.1.45.1.6.3.8.1.1 |
s5ChasUtilGrpIndxThe index of the chassis level group which
contains this component, corresponds to
s5ChasComGrpIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.8.1.1.1 |
s5ChasUtilIndxThe index of the component in the group.
Corresponds to s5ChasComIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.8.1.1.2 |
s5ChasUtilSubIndxSub-component index. Corresponds to
s5ChasComSubIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.8.1.1.3 |
s5ChasUtilTotalCPUUsageThis object returns the percentage of time the CPU has been
busy since system initialization.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.4 |
s5ChasUtilCPUUsageLast1MinuteThis object returns the percentage of time the CPU has been
busy over the last 1 minute.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.5 |
s5ChasUtilCPUUsageLast10MinutesThis object returns the percentage of time the CPU has been
busy over the last 10 minutes.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.6 |
s5ChasUtilCPUUsageLast1HourThis object returns the percentage of time the CPU has been
busy over the last 1 hour.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.7 |
s5ChasUtilCPUUsageLast24HoursThis object returns the percentage of time the CPU has been
busy over the last 24 hours.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.8 |
s5ChasUtilMemoryAvailableThis object returns the percentage of dynamic memory that
is currently free. This is measured as a percentage of
the memory the was available immediately after system
initialization.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.9 |
s5ChasUtilMemoryMinAvailableThis object returns the lowest percentage of dynamic
memory that has been free since system initialization.
This is a 'low-water mark' for memory utilization, and is
essentially the lowest value of s5ChasUtilMemoryUsage
since system initialization.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.10 |
s5ChasUtilCPUUsageLast10SecondsThis object returns the percentage of time the CPU has been
busy over the last 10 seconds.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.11 |
s5ChasUtilMemoryTotalMBThis object returns the total RAM of unit.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.12 |
s5ChasUtilMemoryAvailableMBThis object returns the available RAM of unit.ro Gauge32 .1.3.6.1.4.1.45.1.6.3.8.1.1.13 |
s5ChasPs OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.9 |
s5ChasPsRpsuTableA table that contains extended information on
RPSU power supply components. SEQUENCE OF S5ChasPsRpsuEntry .1.3.6.1.4.1.45.1.6.3.9.1 |
s5ChasPsRpsuEntryA row in the s5ChasPsRpsuTable. Rows
in this table will exist for each existing
row in the s5ChasComTable which represents
any RPSU power supply. The values of the
indices of a row in this table will be equal
to those of the corresponding row in the
s5ChasComTable. S5ChasPsRpsuEntry .1.3.6.1.4.1.45.1.6.3.9.1.1 |
s5ChasPsRpsuGrpIndxThe index of the chassis level group which
contains this component, corresponds to
s5ChasComGrpIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.9.1.1.1 |
s5ChasPsRpsuIndxThe index of the component in the group.
Corresponds to s5ChasComIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.9.1.1.2 |
s5ChasPsRpsuSubIndxSub-component index. Corresponds to
s5ChasComSubIndx.ro Integer32 .1.3.6.1.4.1.45.1.6.3.9.1.1.3 |
s5ChasPsRpsuTypeThis object returns the specific type of RPSU.
It can be set to indicate to the system the type
of installed RPSU in cases where the RPSU type
cannot be automatically detected.rw Enumeration .1.3.6.1.4.1.45.1.6.3.9.1.1.4 |
s5ChasPsRpsuSourceConfigThis object is used to specify how a particular
RPSU should be used by the system, as follows:
ups(1)
Indicates that the RPSU should be used only as
an uninterruptible power source for devices
attached to powered ethernet ports.
rpsu(2)
Indicates that the RPSU should be used only as
a source of backup power for the device itself.
powerSharing(3)
Indicates that the RPSU should be used both as
a source of backup power for the device, and as
a UPS for devices attached to powered ethernet
ports.rw Enumeration .1.3.6.1.4.1.45.1.6.3.9.1.1.5 |
s5ChasMib5000 Chassis MIB
Copyright 1995-2012 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS', and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.45.1.6.3.10 |
IMPORTS5000 Chassis MIB
Copyright 1995-2012 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS', and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. Unknown .1.3.6.1.4.1.45.1.6.3.10 |
s5ChasNotify OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.11 |
s5ChasNotifyFanDirectionThis object is used in the s5CtrFanDirectionError notification to
indicate fan direction.ro Enumeration .1.3.6.1.4.1.45.1.6.3.11.1 |
s5ChasPluggables OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.3.12 |
s5ChasGbicInfoTableA table that contains information about
pluggable ports. SEQUENCE OF S5ChasGbicInfoEntry .1.3.6.1.4.1.45.1.6.3.12.1 |
s5ChasGbicInfoEntryA row in the s5ChasGbicInfoTable. S5ChasGbicInfoEntry .1.3.6.1.4.1.45.1.6.3.12.1.1 |
s5ChasGbicInfoIfIndexA unique value, greater than zero, for each interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.45.1.6.3.12.1.1.1 |
s5ChasGbicInfoGbicTypeThe type of pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.2 |
s5ChasGbicInfoWavelengthThe wavelength value measured in nanometers for the pluggable part.ro Integer32 .1.3.6.1.4.1.45.1.6.3.12.1.1.3 |
s5ChasGbicInfoVendorNameThe name of the vendor of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.4 |
s5ChasGbicInfoVendorOuiThe Organizationally Unique Identifier (OUI) of the pluggable part.ro OCTET STRING .1.3.6.1.4.1.45.1.6.3.12.1.1.5 |
s5ChasGbicInfoVendorPartNoThe vendor part number of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.6 |
s5ChasGbicInfoVendorRevisionThe vendor revision of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.7 |
s5ChasGbicInfoVendorSerialThe vendor serial number for the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.8 |
s5ChasGbicInfoHwOptionsThe hardware options supported by the pluggable part.ro Bits .1.3.6.1.4.1.45.1.6.3.12.1.1.9 |
s5ChasGbicInfoDateCodeThe manufacturing date of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.10 |
s5ChasGbicInfoCleiCodeThe Common Language Equipment Identification Code of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.11 |
s5ChasGbicInfoProductCodeThe product code of the pluggable part.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.3.12.1.1.12 |