Home/Catalog/S5-ROOT-MIB

S5-ROOT-MIB

AI MIB Summary

The S5-ROOT-MIB provides the foundational SNMP management interface for Nortel Networks 5000 series switches, exposing core system status, interface statistics, and hardware health metrics required for device monitoring and configuration. This module serves as the root container for vendor-specific extensions, enabling granular visibility into the operational state of the switch's internal subsystems and network ports.

5000 Root MIB Copyright 1993-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
24
Objects
Active
Status
1
Dependencies

Imported Objects

SYNOPTICS-ROOT-MIB

Objects

24 total
Object Name
s5reg
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.1
s5Traps
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2
s5EthTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.1
s5TokTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.2
s5FddTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.3
s5ChaTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.4
s5ComTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.5
s5EcellTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.6
atmTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.7
remoteLoginTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.8
stpChangeTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.2.9
s5Chassis
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.3
s5Agent
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.4
s5Com
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.5
s5Eth
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.6
s5Tok
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.7
s5Fddi
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.8
s5EnTop
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.9
s5TrTop
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.10
s5FdTop
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.11
s5EnMsTop
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.13
s5AtmTop
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.14
s5IfExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.15
bnLogMsg
OBJECT IDENTIFIER
.1.3.6.1.4.1.45.1.6.16

More MIBs from Synoptics

Browse all SynopticsMIBs →
S5-REG-MIB

SNMP MIB module

2727 objects→
SYNOPTICS-BASIC-ETHTOK-MIB

Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.

428 objects→
SYNOPTICS-ETHERNET-MIB

Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.

379 objects→
NTWS-AP-STATUS-MIB

The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.

245 objects→
NTWS-AP-CONFIG-MIB

The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.

195 objects→
NTWS-TRAP-MIB

The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.

193 objects→