SYNOPTICS-ETHERNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
379
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
379 total| Object Name |
|---|
s3000EnetConcentrator OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.45.1.3.2.1 |
s3EnetConcRetimingStatusDoes this concentrator have retiming turned on.
Writing a 1 will turn off retiming and writing a
2 will turn on retiming. This will change the
active state of retiming but will change the value
in EEPROM only when agentWriteEeprom is set.The
factory default of this state is on.
Retiming cannot be disabled in the 2810 concentrator.
The 2810 agent will implement this object as read-only.rw Enumeration .1.3.6.1.4.1.45.1.3.2.1.1 |
s3EnetConcFrmsRxOkThis contains a count of frames that are successfully
received by the concentrator. This does not include
frames received with a frame-too-long, runt, FCS, or
alignment errors.
This counter includes broadcast and multicast frames
that are received.ro Counter .1.3.6.1.4.1.45.1.3.2.1.2 |
s3EnetConcOctetsRxOkContains a count of data and padding octets in frames
that are successfully received by the concentrator.
This does not include frames received with a
frame-too-long, runt, FCS, or alignment errors.
This counter includes octets in broadcast and multicast
frames that are received.
This counter does not include the octets in the
CRC field. The octets in the address and length/type
fields are counted.ro Counter .1.3.6.1.4.1.45.1.3.2.1.3 |
s3EnetConcMcastFrmsRxOkThis contains a count of frames that are successfully
received by the concentrator and are directed to an
active non-broadcast group address. This does not
include frames received with a frame-too-long, runt,
FCS, or alignment errors.
Only frames that are for a multicast address that
this interface is receiving are counted. Broadcast
packets are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.1.4 |
s3EnetConcBcastFrmsRxOkThis contains a count of frames that are successfully
received by the concentrator and are directed to the
broadcast group address. This does not include frames
received with a frame-too-long, runt, FCS, or
alignment errors.
Multicast packets are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.1.5 |
s3EnetConcCollsThis contains a count of the collisions at the
concentrator level. For NMM+ this is a true counter.
For other NMMs this is a summation of all the port
level collision 'flags' for all ports.ro Counter .1.3.6.1.4.1.45.1.3.2.1.6 |
s3EnetConcTooLongErrorsThis contains a count of frames that are received by
the concentrator and exceed the maximum permitted
frame size. This counter is incremented when the
frameTooLong error is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.1.7 |
s3EnetConcRuntErrorsThis contains a count of frames received by the
concentrator that are less than the minimum permitted
frame size and have a good FCS.ro Counter .1.3.6.1.4.1.45.1.3.2.1.8 |
s3EnetConcFragErrorsThis contains a count of frames received by the
concentrator that are less than the minimum permitted
frame size and have a bad FCS or alignment error.ro Counter .1.3.6.1.4.1.45.1.3.2.1.9 |
s3EnetConcAlignErrorsThis contains a count of frames received by the
concentrator that are not an integral number of
octets in length and do not pass the FCS check.
This counter is incremented when the alignment
Error status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.1.10 |
s3EnetConcFcsErrorsThis contains a count of frames received by the
concentrator that are an integral number of octets
in length that do not pass the FCS check. This
counter is incremented when the frame Check Error
status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.1.11 |
s3EnetConcLateCollErrorsThis contains a total concentrator count of the
late collisions. For NMM+ this is a true counter.
For other NMMs this is a summation of all the port
level late collision 'flags' for all ports.ro Counter .1.3.6.1.4.1.45.1.3.2.1.12 |
s3EnetConcSecureStatusThis s3EnetConcSecureStatus object indicates whether
the security features (both allowed nodes and
LattisSecure) for the concentrator are active or
inactive. If security is active, this object also
indicates whether the allowed nodes feature is
controlled at the concentrator, board, or port level.
LattisSecure features are always controlled at the
port level. (See the Authorized Nodes tables for
more information about how the allowed nodes and
LattisSecure receive security features are
configured.)
If this object is set to concSecureOn(2), then the
allowed nodes feature is controlled at the
concentrator level and activated for every
non-LattisSecure Ethernet port in the concentrator.
If an authorized node violation occurs on any port,
the action specified in s3EnetConcAuthAction is taken.
If this object is set to portCheckOn(3), then allowed
nodes is controlled at the port level by the
s3EnetPortSecureStatus object for that port. The
port's s3EnetPortAuthAction determines the action
taken when authorized nodes violations occur on that
port.
If this object is set to slotCheckOn(4), then allowed
nodes is controlled at the board level by the
s3EnetBoardSecureStatus object for that board.
The board's s3EnetBoardAuthAction determines the
action taken when authorized nodes violations
occur on that board's ports.
If this object is set to concentratorOff(5), then
all security features, including LattisSecure, are
deactivated for the entire concentrator.
No matter what the status of this object, the board
and port level SecureStatus and AuthAction are not
lost even if they are not currently being used. Thus,
the user can change a port's status even if this object
is slotCheckOn(4). If this object is then changed to
portCheckOn(3), then the change will take effect.
The agent must support download of this object in the
CFG file.
In release 4.0, this object was called
s3EnetConcAuthStatus.rw Enumeration .1.3.6.1.4.1.45.1.3.2.1.13 |
s3EnetConcAuthActionIf s3EnetConcSecureStatus is concSecureOn(2) and a
violation occurs, then the action specified by this
object will take place. On a partition, only the
port that the violation occurs on will be partitioned.
This object does not apply to LattisSecure ports.
The agent must support download of this object in
the CFG file.rw Enumeration .1.3.6.1.4.1.45.1.3.2.1.14 |
s3EnetConcSecurityLockIf s3EnetConcSecurityLock is locked(2), the agent will
refuse all requests to modify the 'security configuration'
(defined below) by returning a BadValue return value.
If s3EnetConcSecurityLock is notLocked(3), requests to
modify security configuration will be handled in the
usual manner. SetRequests for objects not included
in the security configuration are not affected by the
state of this object.
Objects that are part of the security configuration
are s3EnetConcAuthStatus, s3EnetConcAuthAction,
s3EnetBoardAuthStatus, s3EnetBoardAuthAction,
s3EnetPortAuthStatus, s3EnetPortAuthAction,
s3EnetPortAddrLearnMode, s3EnetPortTxSecurity,
and all of the objects in the s3EnetAuthNodesTable.ro Enumeration .1.3.6.1.4.1.45.1.3.2.1.15 |
s3EnetConcEnetChanIdentifies the channel to which this NMM is
currently monitoring.ro Enumeration .1.3.6.1.4.1.45.1.3.2.1.16 |
s3000EnetBoard OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.2 |
s3EnetBoardTableA table of board-related objects. The number of
entries is given by the number of Ethernet host
module and network management module boards that
are contained in same backplane Ethernet segment
as the reporting NMM. SEQUENCE OF S3EnetBoardEntry .1.3.6.1.4.1.45.1.3.2.2.1 |
s3EnetBoardEntryA table containing objects about Ethernet boards
which are currently plugged into the 3000 chassis. S3EnetBoardEntry .1.3.6.1.4.1.45.1.3.2.2.1.1 |
s3EnetBoardIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.1.1.1 |
s3EnetBoardTypeSee s3SlotModuleTyperoobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.2 |
s3EnetBoardHwVerSee s3CommonBoardHwVerroobsolete INTEGER .1.3.6.1.4.1.45.1.3.2.2.1.1.3 |
s3EnetBoardStatusSee s3CommonBoardStatusroobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.4 |
s3EnetBoardResetSee s3CommonBoardResetrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.5 |
s3EnetBoardPartStatusSee s3CommonBoardPartStatusrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.6 |
s3EnetBoardNmCntlStatusSee s3CommonBoardCntlStatusroobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.7 |
s3EnetBoardPsStatusSee s3CommonBoardPsStatusroobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.8 |
s3EnetBoardFrmsRxOkThis contains a count of frames that are successfully
received by the board. This does not include frames
received with a frame-too-long, runt, FCS, or alignment
errors.
This counter includes broadcast and multicast frames
that are received.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.9 |
s3EnetBoardOctetsRxOkContains a count of data and padding octets in frames
that are successfully received by the board. This does
not include frames received with a frame-too-long, runt,
FCS, or alignment errors.
This counter includes octets in broadcast and multicast
frames that are received.
This counter does not include the octets in the
CRC field. The octets in the address and length/type
fields are counted.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.10 |
s3EnetBoardMcastFrmsRxOkThis contains a count of frames that are successfully
received by the board and are directed to an active
non-broadcast group address. This does not include
frames received with a frame-too-long, runt, FCS, or
alignment errors.
Only frames that are for a multicast address that
this interface is receiving are counted. Broadcast
packets are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.11 |
s3EnetBoardBcastFrmsRxOkThis contains a count of frames that are successfully
received by the board and are directed to the broadcast
group address. This does not include frames received
with a frame-too-long, runt, FCS, or alignment errors.
Multicast packets are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.12 |
s3EnetBoardCollsThis contains a board level count of collisions.
For NMM+ this is a true counter. For other NMMs
this is a summation of all the port level collision
'flags' for this board.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.13 |
s3EnetBoardTooLongErrorsThis contains a count of frames that are received by
the board and exceed the maximum permitted frame size.
This counter is incremented when the frameTooLong
error is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.14 |
s3EnetBoardRuntErrorsThis contains a count of frames received by the board
that are less than the minimum permitted frame size and
have a good FCS.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.15 |
s3EnetBoardAlignErrorsThis contains a count of frames received by the board
that are not an integral number of octets in length and
do not pass the FCS check. This counter is incremented
when the alignmentError status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.16 |
s3EnetBoardFcsErrorsThis contains a count of frames received by the board
that are an integral number of octets in length that
do not pass the FCS check. This counter is incremented
when the frameCheckError status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.17 |
s3EnetBoardLateCollErrorsThis contains a count of the board level late collisions.
For NMM+ this is a true counter. For other NMMs this is a
summation of all the port level late collision 'flags' for
this board.ro Counter .1.3.6.1.4.1.45.1.3.2.2.1.1.18 |
s3EnetBoardAuthStatusThis object is only used if s3EnetConcSecureStatus is
set to slotCheckOn(4). In this case, turning this object
on(2) means that any node that is heard on this board
which is not allowed on this board (i.e., not in AuthNode
table with the slotIndex equal to this board or 0 for all
boards) will cause the action specified in
s3EnetBoardAuthAction to take place.
If s3EnetConcSecureStatus is set to slotCheckOn(4) but
this object is set to off(3), then the authorized nodes
feature for this board is deactivated.
If s3EnetConcSecureStatus is not set to slotCheckOn(4),
then this object will not be used but will maintain
its settings unless explicitly changed.
This object does not affect the configuration or
functioning of security features on LattisSecure
Host Modules.rw Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.19 |
s3EnetBoardAuthActionIf s3EnetConcSecureStatus is slotCheckOn(4) and
s3EnetBoardAuthStatus is on(2) and an authorized nodes
violation occurs on the board, then the action specified
by this object will take place. On a partition, only the
port that the violation occurs on will be partitioned.
This object does not apply to LattisSecure ports.rw Enumeration .1.3.6.1.4.1.45.1.3.2.2.1.1.20 |
s3EnetBoardUpStampThe time ( in hundredths of a second) that the board
was first seen as a member of this NMM's segment.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.2.1.1.21 |
s3000EnetLocBridge OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.2.2 |
s3EnetLocBridgeSlotTableA table of Local Bridge Board entries. The number of
entries is determined by the Concentrator Slot
Configuration Table. Only those entries that are
Ethernet local bridges will have entries in this list. SEQUENCE OF S3EnetLocBridgeEntry .1.3.6.1.4.1.45.1.3.2.2.2.1 |
s3EnetLocBridgeEntryA table containing objects about Boards which are
local bridges that are currently plugged into the
3000 chassis. S3EnetLocBridgeEntry .1.3.6.1.4.1.45.1.3.2.2.2.1.1 |
s3EnetLocBridgeIndexA unique value for each board. Its value ranges between
1 and 12. The value for each board must remain constant
at least from one re-initialization of the entity's
network management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.2.1.1.1 |
s3EnetLocBridgeDescrDescription of the local bridge board.ro DisplayString .1.3.6.1.4.1.45.1.3.2.2.2.1.1.2 |
s3EnetLocBridgePortCountNumber of ports that are on the local bridge board.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.2.1.1.3 |
s3EnetLocBridgeDiagStsLatest Diagnostic LED Status that has been recorded.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.2.2.1.1.4 |
s3EnetLocBridgeBootStsThe current status of the board as it relates
to rebooting.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.2.1.1.5 |
s3EnetLocBridgeStandbyStsThis status says whether the local bridge is active
or in standby mode.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.2.1.1.6 |
s3EnetLocBridgePortTableA table of Port entries that are part of a local
bridge. The number of entries is determined by knowing
the number of local bridge boards that are installed
by looking at s3ChassisSlotConfigTable and by knowing
how many ports are on a local bridge board by looking at
s3EnetLocBridgePortCount. SEQUENCE OF S3EnetLocBridgePortEntry .1.3.6.1.4.1.45.1.3.2.2.2.2 |
s3EnetLocBridgePortEntryA table containing objects about the ports of the
local bridges that are currently plugged into the
3000 chassis. S3EnetLocBridgePortEntry .1.3.6.1.4.1.45.1.3.2.2.2.2.1 |
s3EnetLocBridgePortSlotIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.2.2.1.1 |
s3EnetLocBridgePortIndexA unique value for each port. Its value ranges
between 1 and 12. The value for each port must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.2.2.1.2 |
s3EnetLocBridgePortMdaIdMedium dependent ID for the port. See s3SlotModuleMdaId
in the SynOptics Common MIB.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.2.2.1.3 |
s3EnetLocBridgePortIfBridge interface types.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.2.2.1.4 |
s3EnetLocBridgePortDescrA text description of the port.ro DisplayString .1.3.6.1.4.1.45.1.3.2.2.2.2.1.5 |
s3EnetLocBridgePortOpStsOperating status of the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.2.2.1.6 |
s3000EnetRemBridge OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.2.3 |
s3EnetRemBridgeSlotTableA table of Remote Bridge Board entries. The number
of entries is determined by the Concentrator Slot
Configuration Table. Only those entries that are
Ethernet remote bridges will have entries in this list. SEQUENCE OF S3EnetRemBridgeEntry .1.3.6.1.4.1.45.1.3.2.2.3.1 |
s3EnetRemBridgeEntryA table containing objects about Boards which are
remote bridges that are currently plugged into the
3000 chassis. S3EnetRemBridgeEntry .1.3.6.1.4.1.45.1.3.2.2.3.1.1 |
s3EnetRemBridgeIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.3.1.1.1 |
s3EnetRemBridgeDescrDescription of the board.ro DisplayString .1.3.6.1.4.1.45.1.3.2.2.3.1.1.2 |
s3EnetRemBridgePortCountNumber of ports that are on the board.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.3.1.1.3 |
s3EnetRemBridgeDiagStsLatest Diagnostic LED Status that has been recorded.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.2.3.1.1.4 |
s3EnetRemBridgeBootStsThe current status of the board as it relates to rebooting.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.1.1.5 |
s3EnetRemBridgeStandbyStsThis status says whether the remote bridge is active
or in standby mode.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.1.1.6 |
s3EnetRemBridgePortTableA table of Port entries that are part of a remote
bridge. The number of entries is determined by
knowing the number of remote bridge boards that are
installed by looking at s3ChassisSlotConfigTable and
by knowing how many ports are on a remote bridge
board by looking at s3EnetRemBridgePortCount. SEQUENCE OF S3EnetRemBridgePortEntry .1.3.6.1.4.1.45.1.3.2.2.3.2 |
s3EnetRemBridgePortEntryA table containing objects about the ports of the
remote bridges that are currently plugged into the
3000 chassis. S3EnetRemBridgePortEntry .1.3.6.1.4.1.45.1.3.2.2.3.2.1 |
s3EnetRemBridgePortSlotIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.3.2.1.1 |
s3EnetRemBridgePortIndexA unique value for each port. Its value ranges
between 1 and 12. The value for each port must
remain constant at least from one re-initialization
of the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.3.2.1.2 |
s3EnetRemBridgePortMdaIdMedium dependent ID for the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.2.1.3 |
s3EnetRemBridgePortDescrA text description of the port.ro DisplayString .1.3.6.1.4.1.45.1.3.2.2.3.2.1.4 |
s3EnetRemBridgePortOpStsOperating status of the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.2.1.5 |
s3EnetRemBridgePortRdySndReady to send status of the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.2.1.6 |
s3EnetRemBridgePortClrSndClear to send status of the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.2.1.7 |
s3EnetRemBridgePortCarDtCarrier detect status of the port.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.3.2.1.8 |
s3000EnetRouter OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.2.4 |
s3EnetRouterSlotTableA table of Router Board entries. The number of
entries is determined by the Concentrator Slot
Configuration Table. Only those entries that
are Ethernet routers will have entries in this list. SEQUENCE OF S3EnetRouterEntry .1.3.6.1.4.1.45.1.3.2.2.4.1 |
s3EnetRouterEntryA table containing objects about Boards which
are routers that are currently plugged into the
3000 chassis. S3EnetRouterEntry .1.3.6.1.4.1.45.1.3.2.2.4.1.1 |
s3EnetRouterIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.4.1.1.1 |
s3EnetRouterDescrDescription of the router board.ro DisplayString .1.3.6.1.4.1.45.1.3.2.2.4.1.1.2 |
s3EnetRouterDiagStsLatest Diagnostic LED Status that has been recorded.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.2.4.1.1.3 |
s3EnetRouterStandbyStsThis status says whether the router is active or in
standby mode.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.4.1.1.4 |
s3EnetCommonBoardTableInformation maintained for each Ethernet board. The
information can be retrieved for any Ethernet board,
even if the board is not on the same backplane Ethernet
segment as this NMM.
The instance is the slot number of the concentrator
that the board occupies. SEQUENCE OF S3EnetCommonBoardEntry .1.3.6.1.4.1.45.1.3.2.2.5 |
s3EnetCommonBoardEntryThere is one entry per Ethernet board in this table. S3EnetCommonBoardEntry .1.3.6.1.4.1.45.1.3.2.2.5.1 |
s3EnetCommonBoardIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.2.5.1.1 |
s3EnetCommonBoardEnetABThe channel to which the board is connected. The
primary use of this object is for providing realtime
switching of boards between channel A and channel B.
It is also returned in the enetChannelChange trap, in
which case it indicates a board is switched from one
channel to the other. The write capability of this
object can only apply to those modules with channel
switching function. Any attempt to write this object
for a non-switchable board, the agent will return
badValue.rw Enumeration .1.3.6.1.4.1.45.1.3.2.2.5.1.2 |
s3EnetCommonBoardChanSwitchThe agent will return switchCapable(2) for any
Ethernet host board which can be switched between
Ethernet channels. The value notSwitchCapable(3)
indicates that the Ethernet board can not be switched
to another channel.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.5.1.3 |
s3EnetCommonBoardRedundThe agent will return redundCapable(2) for any Ethernet
host board which can provide hardware and/or software
controlled redundancy on the port level. The value
notRedundCapable(3) indicates that the Ethernet board
can not support port redundancy.ro Enumeration .1.3.6.1.4.1.45.1.3.2.2.5.1.4 |
s3000EnetPort OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.3 |
s3EnetPortTableA list of port entries. The number of entries is
given by learning the type of board from the
information in the s3ChassisSlotConfigTable. SEQUENCE OF S3EnetPortEntry .1.3.6.1.4.1.45.1.3.2.3.1 |
s3EnetPortEntryA table containing objects about the Ports of
each board plugged into the 3000 chassis which
are on the same backplane Ethernet segment as
the reporting NMM. S3EnetPortEntry .1.3.6.1.4.1.45.1.3.2.3.1.1 |
s3EnetPortBoardIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one reinitialization
of the entity's network management system to the
next reinitialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.1.1.1 |
s3EnetPortIndexA unique value for each port. Its value is dependent
on the board type. The value for each port must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.1.1.2 |
s3EnetPortLinkStatusTells whether the port is receiving link status.rodeprecated Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.3 |
s3EnetPortPartStatusThis indicates the operational status of the Port.
Writing a partition(2) will partition the port
indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing
timedPartition(4) to this object at the same time
that a time value is supplied in s3EnetPortPartTime
is required. Timed partitions will not survive across
a reset. In this case the port will go to the
partition(2) state.
The value latSecPartition(5) is returned when the port
has been automatically partitioned by the LattisSecure
Host Module because of a security violation. The value
autoPartition(3) is returned when the port has been
automatically partitioned by the repeater using the
802.3 repeater auto-partition function.
The agent will not allow this object to be set to
autoPartition(3) or latSecPartition(5) using an
SNMP request.rwdeprecated Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.4 |
s3EnetPortJabberStatusTells whether the DTE connected to the Port is
jabbering or not.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.5 |
s3EnetPortFrmsRxOkThis contains a count of frames that are successfully
received by the port. This does not include frames
received with a frame-too-long, runt, FCS, or alignment
errors. This counter includes broadcast and multicast
frames that are received.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.6 |
s3EnetPortOctetsRxOkContains a count of data and padding octets in frames
that are successfully received by the port. This does
not include frames received with a frame-too-long, runt,
FCS, or alignment errors.
This counter includes octets in broadcast and multicast
frames that are received.
This counter does not include the octets in the
CRC field. The octets in the address and length/type
fields are counted.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.7 |
s3EnetPortMcastFrmsRxOkThis contains a count of frames that are successfully
received by the port and are directed to an active
non-broadcast group address. This does not include
frames received with a frame-too-long, runt, FCS, or
alignment errors.
Only frames that are for a multicast address that this
interface is receiving are counted. Broadcast packets
are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.8 |
s3EnetPortBcastFrmsRxOkThis contains a count of frames that are successfully
received by the port and are directed to the broadcast
group address. This does not include frames received
with a frame-too-long, runt, FCS, or alignment errors.
Multicast packets are not included.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.9 |
s3EnetPortCollsThis contains a count of collisions. For NMM+ this is a
true counter. For other NMMs this is a count of the
collision flags.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.10 |
s3EnetPortTooLongErrorsThis contains a count of frames that are received by
the port and exceed the maximum permitted frame size.
This counter is incremented when the frameTooLong
error is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.11 |
s3EnetPortRuntErrorsThis contains a count of frames received by the port
that are less than the minimum permitted frame size and
have a good FCS.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.12 |
s3EnetPortAlignErrorsThis contains a count of frames received by the port
that are not an integral number of octets in length and
do not pass the FCS check. This counter is incremented
when the alignmentError status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.13 |
s3EnetPortFcsErrorsThis contains a count of frames received the port
that are an integral number of octets in length that
do not pass the FCS check. This counter is incremented
when the frameCheckError status is detected.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.14 |
s3EnetPortLateCollErrorsThis contains a count of late collisions. For NMM+
this is a true counter. For other NMMs this is a count
of the late collision flags.ro Counter .1.3.6.1.4.1.45.1.3.2.3.1.1.15 |
s3EnetPortAuthStatusThis object is only used if s3EnetConcSecureStatus
is set to portCheckOn(3) or if the port is on a
LattisSecure Host Module.
In this case, turning this object on(2) means that
any node that heard on this port which is not allowed
on this port will cause the action specified in
s3EnetPortAuthAction to take place.
This object does not affect the LattisSecure transmit
security feature for the port. It is incompatible with
LattisSecure continuous learning mode. If the value of
s3EnetPortAddrLearnMode for a LattisSecure port is
continuousLearn(3), turning this object to on(2) for
that port will not have any affect.
If s3EnetConcSecureStatus is set to portCheckOn(3) but
this object is set to off(3), then all authorized nodes
or LattisSecure receive security features for this port
are deactivated.
If s3EnetConcSecureStatus is not set to portCheckOn(3),
then this object will not be used for allowed nodes,
but will be used for LattisSecure.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.16 |
s3EnetPortAuthActionIf s3EnetConcSecureStatus is portCheckOn(3) or this
port is on a LattisSecure Host Module, and
s3EnetPortAuthStatus is on(2) and an authorized nodes
violation occurs on this port, then the action specified
by this object will take place on this port.
If the port is a LattisSecure port, the authorized
nodes security will be implemented by the LattisSecure
Host Module.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.17 |
s3EnetPortPartTimeWhen partitioning the port for a specified time,
s3EnetPortPartStatus must be set with timedpartition(4)
and this object must be supplied with the duration
value. If a PDU sets s3EnetPortPartStatus and not
this object, the port will not be partitioned.rwdeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.3.1.1.18 |
s3EnetPortTypeThe media connection type for this port.
Note that this object was called s3EnetPortMDIXSwitch
in the Ethernet 3.3 and 4.0 MIBs.rodeprecated Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.19 |
s3EnetPortInterconStatusThis object tells whether the port is connected to a
host or to an interconnect (defined to be another NMM
that is sending hello messages).
The NMM agent will assign this object the value other(1)
on initialization. If it sees hello messages coming in
on the port, it will change the InterconStatus to be
interconnect(2).ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.20 |
s3EnetPortAddrCollectThis object tells whether the NMM should collect
node address information from this port for the Find
Nodes, Show Nodes, and Traffic Matrix (NMM+ only)
tables.
By default, the node addresses are collected only
from ports that are not identified as interconnect
ports. In addition, allowed nodes checking is
done only on ports that are not interconnect ports.
This object provides a means of overriding the default
for collection and checking of node addresses.
Setting this variable to default(1) tells the NMM to
collect and check addresses if and only the port has
not been identified as an interconnect port.
To disable node address collection and checking on a
port, set this object to neverCollect(2).
To collect and check node addresses for an interconnect
port, set this object to alwaysCollect(3).
This object and its default setting has no affect
on LattisSecure receive or transmit security features.
To restore the 'natural' value for the port, set this
object to default(1).rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.21 |
s3EnetPortAddrLearnModeThis object indicates whether the port should
automatically learn the port address by reading the
source address on the incoming packets. This object
applies only to ports on a LattisSecure Host Module.
For other ports, the agent returns the value other.
A Get will return the current learning mode of the port.
Setting to noAutoLearn(2) can be used to turn off
continuousLearn (3) or oneShotLearn(4).
The value of this object is in effect regardless of the
value of s3EnetConcSecureStatus or s3EnetPortAuthStatus.
Continuous learning is not compatible with LattisSecure
receive security, thus s3EnetPortAddrLearnMode should not
be set to continuousLearn(3) when s3EnetPortAuthStatus
is on(2). If this combination is set, the receive
security will not function.
If this object is set to oneShotLearn(4), the agent will
store the address (when it is learned) into the allowed
nodes tables. This can cause the current address to be
written over.
Because continuous learning is not compatible with
receive security, addresses learned while the port
is in continuous learning mode will not be stored in
the allowed nodes tables.
Attempts to set the value to other(1) on a LattisSecure
port will be rejected by the agent. Likewise, attempts
to set the value to noAutoLearn(2), continuousLearn(3),
or oneShotLearn(4) on a non-LattisSecure port will be
rejected.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.22 |
s3EnetPortTxSecurityThis value of this object is meaningful only when
s3EnetConcSecureStatus is not set to concSecureOff(5)
(i.e., if security features are activated on the
concentrator).
This object applies only to ports on LattisSecure Host
Modules. For other ports, the agent will return other(1)
in response to a get request.
The value off(3) indicates that LattisSecure transmit
security is disabled on this LattisSecure port. The
value on(2) indicates that LattisSecure transmit security
is enabled on this LattisSecure port.
Attempts to set the value to other(1) on a LattisSecure
port will be rejected by the agent. Likewise, attempts
to set the value to on(2) or off(3) on a non-LattisSecure
port will be rejected.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.1.1.23 |
s3EnetCommonPortTableThis table provides a list of port entries. The
number of entries is given for any Ethernet board
in the concentrator, even if the board is not on the
same Ethernet segment as this NMM. SEQUENCE OF S3EnetCommonPortEntry .1.3.6.1.4.1.45.1.3.2.3.2 |
s3EnetCommonPortEntryA table containing objects about the ports of each
Ethernet board plugged into the 3000-series chassis. S3EnetCommonPortEntry .1.3.6.1.4.1.45.1.3.2.3.2.1 |
s3EnetCommonPortBoardIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.2.1.1 |
s3EnetCommonPortIndexA unique value for each port. Its value is dependent
on the board type.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.2.1.2 |
s3EnetCommonPortLinkStatusTells whether the port is receiving link status.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.2.1.3 |
s3EnetCommonPortPartStatusThis indicates the operational status of the Port.
Writing a partition(2) will partition the port
indefinitely and enabled(1) will enable the port.
If a timed partition is desired, then writing
timedPartition(4) to this object at the same time
that a time value is supplied in s3EnetCommonPortPartTime
is required. Timed partitions will not survive across
a reset. In this case the port will go to the
partition(2) state.
The value latSecPartition(5) is returned when the port
has been automatically partitioned by the LattisSecure
Host Module because of a security violation. The value
autoPartition(3) is returned when the port has been
automatically partitioned by the repeater using the
802.3 repeater auto-partition function.
The agent will not allow this object to be set to
autoPartition(3) or latSecPartition(5) using an SNMP
request.
Note that the value timedPartition(4) is returned only
when the board is timed partitioned by this NMM.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.2.1.4 |
s3EnetCommonPortTypeThe media connnection type for this port.
Note that this object was called s3EnetPortMDIXSwitch
in the Ethernet 3.3 and 4.0 MIBs.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.2.1.5 |
s3EnetCommonPortPartTimeWhen partitioning the port for a specified time,
s3EnetCommonPortPartStatus must be set with
timedPartition(4) and this object must be supplied
with the duration value. If a PDU sets
s3EnetCommonPortPartStatus and not this object,
the port will not be partitioned.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.3.2.1.6 |
s3EnetRedPortTableA table of ports for each 10BASE-FL board with
redundancy capability. The number of boards is
determined by checking s3EnetCommonBoardRedund having
a value of redundCapable(2) for each board in table
s3EnetCommonBoardTable. SEQUENCE OF S3EnetRedPortEntry .1.3.6.1.4.1.45.1.3.2.3.3 |
s3EnetRedPortEntryAn entry in the table of ports on boards with
redundancy capability. Entries in the table cannot
be created or deleted via SNMP.
Row modification via SNMP is allowed only for ports
that support either hardware or software redundancy,
but the amount of modifications between the two varies.
Entries for boards that support hardware-redundancy
only allow the objects s3EnetRedPortRedundMode,
s3EnetRedPortSwitchoverStatus, and
s3EnetRedPortSwitchoverTime to be modified.
The object s3EnetRedPortRedundMode can only
be modified on certain agent versions (see the
description of the object for more details).
Entries for boards that support software-redundancy
allow the objects s3EnetRedPortRedundMode,
s3EnetRedPortCompanionSlotNo,
s3EnetRedPortCompanionPortNo,
s3EnetRedPortSwitchoverStatus, and
s3EnetRedPortSwitchoverTime to be modified.
Software-redundant pairs are configured by sending
the objects s3EnetRedPortRedundMode,
s3EnetRedPortCompanionSlotNo, and
s3EnetRedPortCompanionPortNo in the same SNMP SET
PDU, with the object s3EnetRedPortRedundMode
set to the value of swActive(4) or swStandby(5).
When changing an existing software-redundant pair,
the existing pair must first be broken up by setting
the object s3EnetRedPortRedundMode to standalone(1),
and then a new pair must be configured as described
above. S3EnetRedPortEntry .1.3.6.1.4.1.45.1.3.2.3.3.1 |
s3EnetRedPortBoardIndexThe index of the slot containing the board. The value
for each board must remain constant at least from one
re-initialization of the entity's network management
system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.3.1.1 |
s3EnetRedPortIndexThe index of the port on the module.ro INTEGER .1.3.6.1.4.1.45.1.3.2.3.3.1.2 |
s3EnetRedPortRedundModeThe redundancy mode of the port.
The possible values read, which report the redundancy
mode of the port, are:
standalone(1)...the port is not in any redundant pair.
hwActive(2).....the port is the active companion in
a hardware-redundant pair.
hwStandby(3)....the port is the standby companion
in a hardware-redundant pair.
swActive(4).....the port is the active companion in
a software-redundant pair.
swStandby(5)....the port is the standby companion
in a software-redundant pair.
The values that can be written, which change the redundancy
mode, are:
standalone(1)...causes the software-redundant pair
to be broken up.
hwActive(2).....if the previous value was hwStandby(3),
this value will cause the port to become
the active port in the hardware-redundant
pair (i.e., a switchover).
hwStandby(3)....if the previous value was hwActive(2),
this value will cause the port to become
the standby port in the hardware-redundant
pair (i.e., a switchover).
swActive(4).....if the previous value was swStandby(5),
this value will cause the port to become
the active port in the software-redundant
pair (i.e., a switchover).
swStandby(5)....if the previous value was swActive(4),
this value will cause the port to become
the standby port in the software-redundant
pair (i.e., a switchover).
Notes: 1.) The value standalone(1) cannot be written to
effect hardware-redundant pairs.rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.3.1.3 |
s3EnetRedPortOperStatusThis object indicates port's redundancy status.
The values are:
other(1).........none of the following
ok(2)............no fault
localFault(3)....the local port has sensed a fault condition.
remoteFault(4)...the remote port has sensed a fault
condition and has signaled the local port
accordingly.
Either a localFault(3) or remoteFault(4) condition should
cause a redundant port pair to switchover.
Notes: If the redundant link is generating on
10BASE-FL without remote fault capability,
the value remoteFault(4) will not be reported.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.3.1.4 |
s3EnetRedPortRemoteOperStatusThis object reflects the real time status of the
received data from the remote port.
A value of snpxFLRemFltCpblPortUp(1) indicates that
the remote port is capable of 10BASE-FL signaling, as
well as SynOptics proprietary remote fault signaling.
A remote fault on such a port is indicated by
snpxRemFltCpblPortFault(5).
A value of snpxFLFBRemFltCpblPortUp(2) indicates that
the remote port is capable of 10BASE-FL, 10BASE-FB and
SynOptics proprietary remote fault signaling. A remote
fault on such a port is indicated by
snpxRemFltCpblPortFault(5).
A value of tenBaseFLPortUp(3) indicates that the remote
port uses regular idle 10BASE-FL signaling, and is
incapable of remote fault signaling.
A value of tenBaseFBPortUp(4) indicates that the remote
port uses 10BASE-FB synchronous signaling. A remote
fault on such a port is indicated by
tenBaseFBPortFault(6).
A value of unknown(7) indicates that the remote signal
received is none of the above.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.3.1.5 |
s3EnetRedPortCompanionSlotNoThe slot number of the other port which is in the
redundant pair. In the case of a standalone port,
a value of 0 will be returned.
Note: This object is only writable for ports that
support software-redundancy.rw INTEGER .1.3.6.1.4.1.45.1.3.2.3.3.1.6 |
s3EnetRedPortCompanionPortNoThe port number of the other port which is in the
redundant pair. In the case of a standalone port,
a value of 0 will be returned.
Note: This object is only writable for ports that
support software-redundancy.rw INTEGER .1.3.6.1.4.1.45.1.3.2.3.3.1.7 |
s3EnetRedPortSwitchoverStatusThe switchover status of the redundant port pair.
The following values can be written:
timedSwitchover(2)...Immediately causes the active
port to become the standby
port, and the standby port to
become the active port. Then
once the value of
s3EnetRedPortSwitchoverTime
has elapsed to zero, the ports
revert back to their orignal
roles.
The following values can be read:
other(1).............The port is NOT undergoing a
timed switchover.
timedSwitchover(2)...The port is undergoing a
timed switchover.
Notes: 1.) When writing timedSwitchover(2) to this
object, the SET request must also specify a
value for the object s3EnetRedSwitchoverTime.
2.) Once the timed switchover has taken place,
the value of this object reverts from
timedSwitchover(2) to other(1).rw Enumeration .1.3.6.1.4.1.45.1.3.2.3.3.1.8 |
s3EnetRedPortSwitchoverTimeThe length of time before the ports making up
the redundant port pair revert back to their orignal
active or standby roles as defined before the timed
switchover was setup.
The value of this object is meaningful (i.e., non-zero)
only when the redundant port pair is undergoing a
timed switchover, which is indicated by the object
s3EnetRedPortSwitchoverStatus having the value
of timedSwitchover(2).
This object may only be written in the same SET
request that changes the object
s3EnetRedPortSwitchoverStatus to timedSwitchover(2).
Afterwards, it indicates the amount of time left
before the timed switchover is completed, at which
time another switchover occurs and
s3EnetRedPortSwitchoverStatus is changed to
other(1).
This object has the value of zero if the port is not
undergoing a timed switchover, or if the amount
of time is unavailable.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.3.3.1.9 |
s3EnetRedPortCapabilityThe redundancy capability of the port:
hwRedOnly(1).........hardware redundancy only.
swRedOnly(2).........software redundacy only.
notRedunCapable(3)...port not capable of being
configured into a redundant
port pair.
A value of hwRedOnly(1) or swRedOnly(2) means that
the port is capable of being configured into a
redundant port pair.ro Enumeration .1.3.6.1.4.1.45.1.3.2.3.3.1.10 |
s3EnetRedPortLastChgThe value of sysUptime when the last change in the
redundant ports table was observed by the agent.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.3.4 |
s3000EnetNmm OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.4 |
s3EnetNmmTypeSee s3AgentTyperoobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.1 |
s3EnetNmmMdaHwVerSee AgentMdaHwVerroobsolete INTEGER .1.3.6.1.4.1.45.1.3.2.4.2 |
s3EnetNmmFwVerSee s3AgentFwVerroobsolete INTEGER .1.3.6.1.4.1.45.1.3.2.4.3 |
s3EnetNmmSwMajorVerSee s3AgentSwMajorroobsolete INTEGER .1.3.6.1.4.1.45.1.3.2.4.4 |
s3EnetNmmSwMinorVerSee s3AgentSwMinorroobsolete INTEGER .1.3.6.1.4.1.45.1.3.2.4.5 |
s3EnetNmmStatusSee s3AgentStatusroobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.6 |
s3EnetNmmModeSee s3AgentModerwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.7 |
s3EnetNmmResetSee s3AgentResetrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.8 |
s3EnetNmmRestartSee s3AgentRestartrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.9 |
s3EnetNmmIpAddrSee s3AgentIpAddrrwobsolete IpAddress .1.3.6.1.4.1.45.1.3.2.4.10 |
s3EnetNmmNetMaskSee s3AgentNetMaskrwobsolete IpAddress .1.3.6.1.4.1.45.1.3.2.4.11 |
s3EnetNmmDefaultGatewaySee s3AgentDefaultGatewayrwobsolete IpAddress .1.3.6.1.4.1.45.1.3.2.4.12 |
s3EnetNmmFileServerAddrSee s3AgentBootServerAddrrwobsolete IpAddress .1.3.6.1.4.1.45.1.3.2.4.13 |
s3EnetNmmBootFileSee s3AgentBootFilerwobsolete OCTET STRING .1.3.6.1.4.1.45.1.3.2.4.14 |
s3EnetNmmBootModeSee s3AgentBootModerwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.15 |
s3EnetNmmWriteEepromSee s3AgentWriteEepromrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.16 |
s3EnetNmmBaudRateSee s3AgentBaudRateroobsolete Gauge .1.3.6.1.4.1.45.1.3.2.4.17 |
s3EnetNmmInitStringSee s3AgentInitStringrwobsolete OCTET STRING .1.3.6.1.4.1.45.1.3.2.4.18 |
s3EnetNmmLocationSee s3AgentLocationrwobsolete OCTET STRING .1.3.6.1.4.1.45.1.3.2.4.19 |
s3EnetNmmTrapServerTableSee s3AgentTrapReceiverTableobsolete SEQUENCE OF S3EnetNmmTrapServerEntry .1.3.6.1.4.1.45.1.3.2.4.20 |
s3EnetNmmTrapServerEntrySee s3AgentTrapReceiverEntryobsolete S3EnetNmmTrapServerEntry .1.3.6.1.4.1.45.1.3.2.4.20.1 |
s3EnetNmmTrapTypeSee s3AgentTrapRcvrStatusrwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.20.1.1 |
s3EnetNmmTrapServerAddressSee s3AgentTrapRcvrNetAddressrwobsolete IpAddress .1.3.6.1.4.1.45.1.3.2.4.20.1.2 |
s3EnetNmmTrapServerCommSee s3AgentTrapRcvrCommrwobsolete OCTET STRING .1.3.6.1.4.1.45.1.3.2.4.20.1.3 |
s3EnetNmmAuthTrapSee s3AgentAuthTraprwobsolete Enumeration .1.3.6.1.4.1.45.1.3.2.4.21 |
s3000EnetNode OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.5 |
s3EnetShowNodesTableTable containing a list of all of the nodes that have
been active during the aging interval that are currently
connected to the network through this concentrator.
This table is different from the FindNodes table in that
this table is indexed using the slot, port, and MAC address
attributes associated with the node. This allows a
manager to get all nodes based on slot, slot-port, or
slot-port-MAC. SEQUENCE OF S3EnetShowNodesEntry .1.3.6.1.4.1.45.1.3.2.5.1 |
s3EnetShowNodesEntryList of nodes active on the concentrator and the slot
and port the nodes are on. S3EnetShowNodesEntry .1.3.6.1.4.1.45.1.3.2.5.1.1 |
s3EnetShowNodesSlotIndexThe board number the node is on. Valid entries are 1-12.ro INTEGER .1.3.6.1.4.1.45.1.3.2.5.1.1.1 |
s3EnetShowNodesPortIndexThe port number the node is on. Valid entries are 1-12.ro INTEGER .1.3.6.1.4.1.45.1.3.2.5.1.1.2 |
s3EnetShowNodesMacAddressThis object contains the MAC address (i.e. the
Ethernet address) of the node.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.5.1.1.3 |
s3EnetShowNodesStatusThe status of the node. Determines whether the node
has actively transmitted or not over the last 5 seconds.ro Enumeration .1.3.6.1.4.1.45.1.3.2.5.1.1.4 |
s3EnetShowNodesVendorTypeThe vendor type of the adapter seen on this port. If
the vendor is unknown other(1) should be returned.rodeprecated Enumeration .1.3.6.1.4.1.45.1.3.2.5.1.1.5 |
s3EnetShowNodesAuthStatusThe object is used determine how the node was added to
this table. If the node was learned by listening to the
network then on reads network(2) should be returned. If
the node is another NMM or known concentrator device,
then nmm(3) is returned. If the device's MAC
address is unknown because of some unknown but legal
configuration, then other(1) should be returned and
s3EnetShowNodesMacAddress should return all zeros.
If the node was entered into the AllowedNode list
via management control, and was seen on a port that it
was authorized to use, then authorized(4) should
be returned.ro Enumeration .1.3.6.1.4.1.45.1.3.2.5.1.1.6 |
s3EnetNodeAgeIntervalThe time used for aging of the nodes in tables
s3EnetShowNodesTable and s3EnetFindNodesTable.
Once a node has completely aged it will be
removed from these tables.
Note:
Agents that implement the s3EnetSdTrafTable and
s3EnetDsTrafTable tables and do not implement the
the object s3EnetTrafAgeInterval (i.e., agents prior
to version 5.3), also use s3EnetNodeAgeInterval to
age the nodes in these two tables.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.5.2 |
s3EnetFindNodesTableTable containing a list of all of the nodes that have
been active during the aging interval that are
currently connected to the network through this
concentrator. This table is different than the
ShowNodes table in that this table is index using
only the MAC address attribute associated with the node.
This allows a manager to be able to quickly determine
if a node with a particular MAC address is located
on this concentrator or not. SEQUENCE OF S3EnetFindNodesEntry .1.3.6.1.4.1.45.1.3.2.5.3 |
s3EnetFindNodesEntryEntry in the table containing the slot, port and MAC
address of a node connected to the Ethernet through
this concentrator. S3EnetFindNodesEntry .1.3.6.1.4.1.45.1.3.2.5.3.1 |
s3EnetFindNodesMacAddressMAC address of node that this entry in the table is for.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.5.3.1.1 |
s3EnetFindNodesSlotIndexThe board that the node is connected through.ro INTEGER .1.3.6.1.4.1.45.1.3.2.5.3.1.2 |
s3EnetFindNodesPortIndexThe port that the node is connected through.ro INTEGER .1.3.6.1.4.1.45.1.3.2.5.3.1.3 |
s3EnetAuthNodesTableTable containing a list of MAC addresses and the slot
and ports that the MAC address is allowed to be heard on,
in case the authorized node feature is turned on.
If a MAC is allowed on any slot and port then the entry
will have the slot=0 and the port=0. If the MAC address
is allowed on a particular board then slot=allowed board
and port=0. If the MAC is only allowed on one port then
the entry will contain a slot value and port value
between 1-12.
Allowed nodes for LattisSecure ports must be configured
for that specific port. The agent will reject an attempt
to create a slot-level entry for slot=x, port=0, if the
board in slot x is a LattisSecure Host Module. Only a
single address may be configured for a LattisSecure port.
Adding a second address (with the same LattisSecure
slot-port number) to the table will cause the first
address to be replaced with the new entry.
A MAC address can only appear in the table one time.
To determine when a station heard on the network must
be verified in this table please read the complete
description of the authorized node list feature as
described with object S3EnetConcAuthStatus.
Entries in this table may be downloaded via the CFG file
or can be added via SNMP. All adds via SNMP will be
lost when the system is reset. SEQUENCE OF S3EnetAuthNodesEntry .1.3.6.1.4.1.45.1.3.2.5.4 |
s3EnetAuthNodesEntryEntry in the table containing a MAC address of a
node that is allowed on the ethernet through this
concentrator. S3EnetAuthNodesEntry .1.3.6.1.4.1.45.1.3.2.5.4.1 |
s3EnetAuthNodesMacAddrMAC address of node that this entry in the table
is for.rw PhysAddress .1.3.6.1.4.1.45.1.3.2.5.4.1.1 |
s3EnetAuthNodesSlotIndexThe board that the node is allowed to be heard through.
If this object is 0, then the MAC address is allowed
on any board in the concentrator. In this case
s3EnetAuthNodesPortIndex should also be 0. Otherwise,
this object describes the slot that the MAC address of
this entry is allowed to connect to.rw INTEGER .1.3.6.1.4.1.45.1.3.2.5.4.1.2 |
s3EnetAuthNodesPortIndexThe port that the node is allowed to be heard through.
If this object is 0, then the MAC address of this entry
is allowed to connect to any port on the board (if
s3EnetAuthNodesSlotIndex is not 0) or if
s3EnetAuthNodesSlotIndex is 0, then the MAC address is
allowed to be heard from any port on the concentrator.
Otherwise, this object specifies which port on the
s3EnetAuthNodesSlotIndex this MAC address is allowed
to be heard on.rw INTEGER .1.3.6.1.4.1.45.1.3.2.5.4.1.3 |
s3EnetAuthNodesStatusThe status of the AuthNodes entry. The primary use
of this object is for modifying the AuthNodes table.
It is also returned in the enetAuthViolation trap,
in which case it indicates whether the violating
MAC address was found in the AuthNodes table.
Setting this entry to invalid(1) causes the entry to be
deleted from the table. Setting a new entry with valid(2)
causes the entry to be created in the table. The response
to a get request or get-next request will always
indicate a status of valid(2), since invalid entries
are removed from the table.rw Enumeration .1.3.6.1.4.1.45.1.3.2.5.4.1.4 |
s3EnetMaxNodesPerPortMaximun number of MAC address remembered by the
agent on a per port basis, this number should be
smaller than the maximum limit imposed by the agent.rw INTEGER .1.3.6.1.4.1.45.1.3.2.5.5 |
s3000EnetTopology OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.6 |
s3000EnetNmmTopology OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.6.1 |
s3EnetTopNmmTableA table of the NMM's in the flat network. SEQUENCE OF S3EnetTopNmmEntry .1.3.6.1.4.1.45.1.3.2.6.1.1 |
s3EnetTopNmmEntryTable that contains information about NMMs that are
in the same flat network as this NMM. S3EnetTopNmmEntry .1.3.6.1.4.1.45.1.3.2.6.1.1.1 |
s3EnetTopNmmSlotSlot that the NMM this entry is for can be found using the
topology protocol. This is the slot from which a topology
message was received.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.1.1.1.1 |
s3EnetTopNmmPortPort that the NMM this entry is for can be found using the
topology protocol. This is the port from which a topology
message was received.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.1.1.1.2 |
s3EnetTopNmmIpAddrIpAddress of the NMM this entry is for. This is the
IP address of the NMM that sent a topology message.ro IpAddress .1.3.6.1.4.1.45.1.3.2.6.1.1.1.3 |
s3EnetTopNmmMacAddrMAC Address of the NMM this entry is for.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.6.1.1.1.4 |
s3EnetTopNmmChassisTypeConcentrator type of the NMM this entry is for.
The enumerated values of this object are the same as
defined in the common MIB for object s3ChassisType.ro SnpxChassisType .1.3.6.1.4.1.45.1.3.2.6.1.1.1.5 |
s3EnetTopNmmBkplTypeConcentrator backplane type of the NMM this entry is for.
The enumerated values of this object are the same as
defined in the common MIB for object s3ChassisBkplType.ro SnpxBackplaneType .1.3.6.1.4.1.45.1.3.2.6.1.1.1.6 |
s3EnetTopNmmLocalSegDoes this entry NMM exist in the same segment as this
(the reporting) NMM.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.1.1.1.7 |
s3EnetTopNmmNumSeenNumber of NMMs visible from the slot-port pair that
this NMM is seen through.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.1.1.1.8 |
s3EnetTopNmmModuleTypeThe module type of the NMM that this entry is for.
The values of this object are equivalent to those defined
in the common MIB for object s3SlotModuleType.ro S3ModuleType .1.3.6.1.4.1.45.1.3.2.6.1.1.1.9 |
s3EnetTopNmmNumLinksNumber of links through which NMMs are visible on this NMM.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.1.1.1.10 |
s3EnetTopNmmChgStatusIf this NMM has detected any change of topology relative
to itself it will set this object to change(1), otherwise
noChange(2) will be returned.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.1.1.1.11 |
s3EnetTopNmmHelloTimeHello Time interval used in the topology update protocol.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.6.1.2 |
s3EnetTopNmmSubsetTableEncoded octet string of the s3EnetTopNmmTable. SEQUENCE OF S3EnetTopNmmSubsetEntry .1.3.6.1.4.1.45.1.3.2.6.1.3 |
s3EnetTopNmmSubsetEntryEncoded octet string of the s3EnetTopNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the instance returned.
On GET-NEXTs: instance returned is the instance of
the last record contained in the octet string. S3EnetTopNmmSubsetEntry .1.3.6.1.4.1.45.1.3.2.6.1.3.1 |
s3EnetTopNmmSubsetEncoded octet string. On reads it contains an integral
number of s3EnetTopNmmEntry records. All entries are
the same size. Values are specified in SynOptics
technical documents.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.6.1.3.1.1 |
s3000EnetBridTopology OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.6.2 |
s3EnetTopBridgeTableA table of Bridges that are in the same segment as
this NMM network. SEQUENCE OF S3EnetTopBridgeEntry .1.3.6.1.4.1.45.1.3.2.6.2.1 |
s3EnetTopBridgeEntryTable that contains information about Bridges that
are in the same segment as this NMM. S3EnetTopBridgeEntry .1.3.6.1.4.1.45.1.3.2.6.2.1.1 |
s3EnetTopBridgeIpAddrIP address of the bridge from the Hello PDU.ro IpAddress .1.3.6.1.4.1.45.1.3.2.6.2.1.1.1 |
s3EnetTopBridgeNumberBridge Number assigned to this bridge.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.2.1.1.2 |
s3EnetTopBridgeMacAddrMAC Address of this bridge.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.6.2.1.1.3 |
s3EnetTopBridgeTypeKind of bridge this entry represents.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.2.1.1.4 |
s3EnetTopBridgeStatusCurrent operational status of this bridge.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.2.1.1.5 |
s3EnetTopBridgeSlotNumSlot on the concentrator that the Hello PDU from
the bridge was received.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.2.1.1.6 |
s3EnetTopBridgePortNumPort on concentrator that the Hello PDU from
the bridge was received.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.2.1.1.7 |
s3EnetTopBridgeModuleTypeModule type of the board that the Hello PDU from the
Bridge was received.ro S3ModuleType .1.3.6.1.4.1.45.1.3.2.6.2.1.1.8 |
s3EnetTopBridgeHelloPortNumPort Number on the Bridge from which the Hello PDU was sent.ro INTEGER .1.3.6.1.4.1.45.1.3.2.6.2.1.1.9 |
s3EnetTopBridgeHelloPortTypeType of the Port on the Bridge from which the Hello
PDU was sent.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.2.1.1.10 |
s3EnetTopBridgeHelloPortStatusStatus of the Port on the Bridge from which the Hello
PDU was sent.ro Enumeration .1.3.6.1.4.1.45.1.3.2.6.2.1.1.11 |
s3EnetTopBridgeCompBridgeMac1Contains one of the 2 companion MAC addresses of the
remote bridge. If this entry is for a local bridge or
is unknown, then this object should
contain the MAC address of 0:0:0:0:0:0.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.6.2.1.1.12 |
s3EnetTopBridgeCompBridgeMac2Contains one of the 2 companion MAC addresses of the
remote bridge. If this entry is for a local bridge
or is unknown, then this object should contain the
MAC address of 0:0:0:0:0:0.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.6.2.1.1.13 |
s3EnetTopBdgSubsetTableEncoded octet string of the s3EnetTopBridgeTable. SEQUENCE OF S3EnetTopBdgSubsetEntry .1.3.6.1.4.1.45.1.3.2.6.2.2 |
s3EnetTopBdgSubsetEntryEncoded octet string of the s3EnetTopBridgeTable.
Instance returned in Response PDU:
On GETs: instance specified is the instance returned.
On GET-NEXTs: instance returned is the instance
of the last record contained in the octet string. S3EnetTopBdgSubsetEntry .1.3.6.1.4.1.45.1.3.2.6.2.2.1 |
s3EnetTopBdgSubsetEncoded octet string. On reads it contains an integral
number of s3EnetTopBridgeEntry records. All entries are
the same size. Values are specified in SynOptics
technical documents.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.6.2.2.1.1 |
s3000EnetTopInfo OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.6.3 |
s3EnetTopNmmLstChgThe value of sysUpTime the last time an entry in the
NMM topology table was added, deleted, or modified. If
the NMM topology table has not changed since cold/warm
start of the agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.6.3.1 |
s3EnetTopBridgeLstChgThe value of sysUpTime the last time an entry in the
bridge topology table was added, deleted, or modified.
If the bridge topology table has not changed since
cold/warm start of the agent, then the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.6.3.2 |
s3000EnetThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.8 |
s3EnetThreshTableThe table of thresholds.
There are three kinds of thresholds supported
in the threshold table: port thresholds, slot
thresholds, and concentrator thresholds. The
object s3EnetThreshObject in the threshold table
is used to specify the kind of threshold for the
table entry.
When the value of the object s3EnetThreshObject
is port(4), the threshold entry applies to a
specific port, which is identified by the value
of the objects s3EnetThreshSlot and
s3EnetThreshPort. The port must be on the same
segment as the NMM in order for the NMM to
monitor the threshold.
When the value of the object s3EnetThreshObject
is slot(3), the threshold entry applies to a
specific slot, which is identified by the value
of the object s3EnetThreshSlot. The slot must
be on the same segment as the NMM in order for
the NMM to monitor the threshold.
When the value of the object s3EnetThreshObject
is concentrator(2), the threshold entry applies
to the segment the NMM is connected to within
the concentrator. SEQUENCE OF S3EnetThreshEntry .1.3.6.1.4.1.45.1.3.2.8.1 |
s3EnetThreshEntryA row in the Ethernet Threshold Table.
The following columns must be specified in a
SNMP SET request to create a row in the table
for each of the three kinds of thresholds (each
name is prefixed by s3EnetThresh):
PORT SLOT CONCENTRATOR
========= ========= ============
Status=(1) Status=(1) Status=(1)
Object=(4) Object=(3) Object=(2)
Slot Slot
Port
Type Type Type
Condition Condition Condition
SetValue SetValue SetValue
Action Action Action
*Duration Duration Duration
with the object s3EnetThreshStatus set to the
value addActive(1).
Notes: 1.) The value of s3EnetThreshObject
selects the kind of threshold for
the row (i.e., for port thresholds
it is set to the value port(4), for
slot thresholds it is set to the
value slot(3), and for concentrator
thresholds it is set to the value
concentrator(2)).
2.) The object s3EnetThreshPort is not
used for creating slot level
thresholds, and is set to 0 by the
agent when the row is created.
3.) The objects s3EnetThreshPort and
s3EnetThreshSlot are not used for
creating concentrator level
thresholds, and are both set to
0 by the agent when the row is
created.
4.) The value of s3EnetThreshDuration
is ignored for port level link
status thresholds.
To delete a row in the table, the object
s3EnetThreshStatus needs to be specified in a
SNMP SET request with its value equal to
delDead(2). S3EnetThreshEntry .1.3.6.1.4.1.45.1.3.2.8.1.1 |
s3EnetThreshIndexThe index into the threshold table.ro INTEGER .1.3.6.1.4.1.45.1.3.2.8.1.1.1 |
s3EnetThreshStatusThe status of the threshold.
The possible values for a write are:
addActive(1)...If the entry does not exist, the
entry is created as long as
the other necessary objects
are in the SNMP SET request.
If the entry does exist
and is inactive, it is
activated.
delDead(2).....Causes the entry to be deleted
from the table. It could take
5 seconds after delDead(2) is
written to actually delete the
entry due to task scheduling.
The possible values for a read are:
addActive(1)...This threshold entry is active.
delDead(2).....This threshold entry is inactive
and will be deleted in 5
seconds or less.rw Enumeration .1.3.6.1.4.1.45.1.3.2.8.1.1.2 |
s3EnetThreshObjectSpecifies the part of the concentrator the
threshold applies. The possible values are:
other(1)..........Unknown threshold (error)
concentrator(2)...The threshold applies to the
segment the NMM is connected
to within the concentrator
slot(3)...........The threshold applies to a
specific slot in the
concentrator identified by
s3EnetThreshSlot
port(4)...........The threshold applies to a
specific port in the
concentrator identified by
s3EnetThreshSlot and
s3EnetThreshPort
All values are read-write with the exception of
other(1), which is read-only.
See the description of the object s3EnetThreshType
for the explanation of which thresholds are
applicable to port(4), slot(3), and
concentrator(2).rw Enumeration .1.3.6.1.4.1.45.1.3.2.8.1.1.3 |
s3EnetThreshSlotIf s3EnetThreshObject is slot(3) or port(4), then
this contains a valid slot. Otherwise, the contents
of this object is meaningless.rw INTEGER .1.3.6.1.4.1.45.1.3.2.8.1.1.4 |
s3EnetThreshPortIf s3EnetThreshObject is port(4), then this contains
a valid port. Otherwise, the contents of this object
is meaningless.rw INTEGER .1.3.6.1.4.1.45.1.3.2.8.1.1.5 |
s3EnetThreshTypeDetermines which type of threshold applies to
this entry. The possible values that can be
read and written are listed below.
Applicable to ALL Thresholds
==============================================
goodBytes(2).........Count of good bytes
goodPkts(3)..........Count of good packets
badPkts(4)...........Count of bad packets
crcPkts(5)...........Count of packets with CRC
errors
misaligned(6)........Count of misaligned packets
runtPkts(7)..........Count of runt packets
fragPkts(8)..........Count of fragmented packets
tooLong(9)...........Count of too long packets
collision(10)........Count of collisions
lateColls(11)........Count of late collisions
multicast(13)........Count of multicast packets
broadcast(14)........Count of broadcast packets
shortEvents(15)......Count of short events
dataRateMismatches(17)....
Count of data rate
mismatches
networkErrors(18).........
Count of short events,
late collisions, and
data rate mismatches
badToGoodPktRatio(19).....
Ratio of bad packets to
good packets, where
bad packets is the sum
of packets with alignment
errors, packets with FCS
errors, runt packets, and
packets that are too long
netErrToGoodPktRatio(20)...
Ratio of network error
packets to good packets,
where network error
packets is the sum of
short event packets,
packets with late
collisions, and data
rate mismatch packets
colltoGoodPktRatio(21).....
Ratio of collision packets
to good packets
Applicable ONLY to Port Thresholds
==============================================
linkStatus(12).......Status of the link
srcAddrChanges(16)...Count of source address
changes
Applicable ONLY to Concentrator Thresholds
==============================================
collBackOffErr(22)...Count of collision backoff
errors
Note: 1.) The value other(1) can only be
read and it indicates the entry
has an invalid or unknown threshold
type.rw Enumeration .1.3.6.1.4.1.45.1.3.2.8.1.1.6 |
s3EnetThreshConditionConditions that set off the threshold. The
possible values are:
other(1)........None of the following
crossValue(2)...The value of
s3EnetThreshActualValue
crosses the value of
s3EnetThreshSetValue (i.e.,
either from lower to higher
or from higher to lower)
overValue(3)....The value of
s3EnetThreshActualValue is
greater than
s3EnetThreshSetValue
overRate(4).....The rate of
s3EnetThreshActualValue/sec
is greater than
s3EnetThreshSetValue/sec
linkOn(5).......The link status of the port
has changed to ON
linkOff(6)......The link status of the port
has changed to OFF
overRatio(7)....The ratio in
s3EnetThreshActualValue is
greater than
s3EnetThreshSetValue.
Both values are in units of
0.01% (i.e., 100 equals 1.0%)
The values that the object s3EnetThreshCondition
can have is actually dependent on the value of the
object s3EnetThreshType. The table below shows
the valid combinations between the two objects.
If s3EnetThreshType Allowed Values For
Is Equal To s3EnetThreshCondition Are
=================== =========================
goodBytes(2) 2, 3, 4
goodPkts(3) 2, 3, 4
badPkts(4) 2, 3, 4
crcPkts(5) 2, 3, 4
misaligned(6) 2, 3, 4
runtPkts(7) 2, 3, 4
fragPkts(8) 2, 3, 4
tooLong(9) 2, 3, 4
collision(10) 2, 3, 4
lateColls(11) 2, 3, 4
linkStatus(12) 5, 6
multicast(13) 2, 3, 4
broadcast(14) 2, 3, 4
shortEvents(15) 2, 3, 4
srcAddrChanges(16) 2, 3, 4
dataRateMismatches(17) 2, 3, 4
networkErrors(18) 2, 3, 4
badToGoodPktRatio(19) 7
netErrToGoodPktRatio(20) 7
colltoGoodPktRatio(21) 7
collBackOffErr(22) 2, 3, 4
When the condition specified is crossValue(2) or
overValue(3), the value of s3EnetThreshActualValue
is accumulated from the beginning of the duration
window and is checked every 5 seconds.
When the condition specified is overRate(4) or
overRatio(5), and the duration is less than or
equal to 5 seconds, the value of
s3EnetThreshActualValue is based on the data
accumulated during the 5 second sampling period.
When the condition specified is overRate(4) or
overRatio(5), and the duration is greater than
5 seconds, the value of s3EnetThreshActualValue
is based on the data accumulated during the
entire duration window.rw Enumeration .1.3.6.1.4.1.45.1.3.2.8.1.1.7 |
s3EnetThreshSetValueThreshold setting value.rw INTEGER .1.3.6.1.4.1.45.1.3.2.8.1.1.8 |
s3EnetThreshActualValueCurrent value of the threshold counter. This
object is set to zero at the begining of each
duration window.ro INTEGER .1.3.6.1.4.1.45.1.3.2.8.1.1.9 |
s3EnetThreshActionDetermines what action is to take place if the
threshold condition occurs. The possible values
that can be read and written are listed below.
Applicable to ALL Thresholds
==============================================
noAction(2)............Take no action
sendTrap(3)............Send a trap
Applicable ONLY to Port Thresholds
==============================================
partSlot(6)............Partition the slot
identified by
s3EnetThreshSlot
partSlotPort(7)........Partition the port
identified by
s3EnetThreshSlot and
s3EnetThreshPort
Applicable ONLY to Slot Thresholds
==============================================
trapPartSlot(10).......Send a trap and
partition the slot
identified by
s3EnetThreshSlot
trapPartSlotPort(11)...Send a trap and
partition the port
identified by
s3EnetThreshSlot and
s3EnetThreshPort
Notes: 1.) The value other(1) can only be
read and it indicates the entry
has an invalid or unknown threshold
action.
2.) The values res4(4), res5(5), res8(8),
and res9(9) are no longer used and
should never be read or written.
The timing and frequency of the action taken when
the threshold condition is met is dependent upon
the type of condition (i.e., s3EnetThreshCondition)
and the length of the duration window (i.e.,
s3EnetThreshDuration).
If the threshold conditionis crossValue(2), the
action will be taken only ONCE during the duration
window at the sampling period the condition is
first met.
If the threshold condition is overValue(3),
linkOn(5), or linkOff(6), the action will be
taken at each sampling period the condition
is met until the end of the duration window.
If the threshold condition is overRate(4) or
overRatio(5) the action will be taken only ONCE
at the end of the duration window if the
condition is met.rw Enumeration .1.3.6.1.4.1.45.1.3.2.8.1.1.10 |
s3EnetThreshExceedCountCounter for how many times the selected threshold
has reached its setting value.ro Counter .1.3.6.1.4.1.45.1.3.2.8.1.1.11 |
s3EnetThreshDurationLength of window over which threshold counts
are summed, specified in intervals of 500
TimeTicks (i.e., 5 seconds). This window is
broken down into 5 second sampling periods
for purposes of checking the threshold
conditions, and determining when the actions
specified need to take place when the condition
occurs.
If this object is written with a value that is
not evenly divisible by 500, the agent will
internally round the value up to the closest
integral of 500 before it is used in threshold
calculations (i.e., a value of 12 can be
written, but will be interpreted as 15).
Notes: 1.) A value of zero indicates an
infinite duration window if the
value of s3EnetThreshCondition
is crossValue(2) or overValue(3).
2.) If the value of
s3EnetThreshCondition is
overRate(4) or overRatio(5),
a value of zero is equivalent
to a duration window of 5
seconds.
3.) If the value of s3EnetThreshType
is linkStatus(12), this value of
this object is ignore and assumed
to be infinite.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.8.1.1.12 |
s3EnetThreshTableSizeThe maximum number of entries in the table
s3EnetThreshTable.ro INTEGER .1.3.6.1.4.1.45.1.3.2.8.2 |
s3000EnetSADATraffic OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.9 |
s3EnetSdTrafTableThis table contains a list of entries which provide
SA-DA traffic information. Specifically frame and
byte counter values are provided per unique SA-DA
pair. The indexing scheme of this table allows an
SA list to be retrieved using GETNEXT. An SA list
is a list of entries that have a common SA, however,
different DAs.deprecated SEQUENCE OF S3EnetSdTrafEntry .1.3.6.1.4.1.45.1.3.2.9.1 |
s3EnetSdTrafEntryAn entry in the SA-DA traffic table.deprecated S3EnetSdTrafEntry .1.3.6.1.4.1.45.1.3.2.9.1.1 |
s3EnetSdTrafMacSASource MAC address.rodeprecated PhysAddress .1.3.6.1.4.1.45.1.3.2.9.1.1.1 |
s3EnetSdTrafMacDADestination MAC address.rodeprecated PhysAddress .1.3.6.1.4.1.45.1.3.2.9.1.1.2 |
s3EnetSdTrafFramesThe number of good frames received by the concentrator
for a SA-DA pair.rodeprecated Counter .1.3.6.1.4.1.45.1.3.2.9.1.1.3 |
s3EnetSdTrafBytesThe number of bytes in good frames received by the
concentrator for a SA-DA pair.rodeprecated Counter .1.3.6.1.4.1.45.1.3.2.9.1.1.4 |
s3EnetDsTrafTableThis table contains a list of entries which provide
DA-SA traffic information. Specifically frame and
byte counter values are provided per unique DA-SA
pair. The indexing scheme of this table allows a
DA list to be retrieved using GETNEXT. A DA list
is a list of entries that have a common DA, however,
different SAs.deprecated SEQUENCE OF S3EnetDsTrafEntry .1.3.6.1.4.1.45.1.3.2.9.2 |
s3EnetDsTrafEntryAn entry in the DA-SA table.deprecated S3EnetDsTrafEntry .1.3.6.1.4.1.45.1.3.2.9.2.1 |
s3EnetDsTrafMacDADestination MAC address.rodeprecated PhysAddress .1.3.6.1.4.1.45.1.3.2.9.2.1.1 |
s3EnetDsTrafMacSASource MAC address.rodeprecated PhysAddress .1.3.6.1.4.1.45.1.3.2.9.2.1.2 |
s3EnetDsTrafFramesThe number of good frames received by the concentrator
for a DA-SA pair.rodeprecated Counter .1.3.6.1.4.1.45.1.3.2.9.2.1.3 |
s3EnetDsTrafBytesThe number of bytes in good frames received by the
concentrator for a DA-SA pair.rodeprecated Counter .1.3.6.1.4.1.45.1.3.2.9.2.1.4 |
s3EnetPagedTrafTableThis table contains a list of entries for the 'paged'
Traffic Matrix table.deprecated SEQUENCE OF S3EnetPagedTrafEntry .1.3.6.1.4.1.45.1.3.2.9.3 |
s3EnetPagedTrafEntryA 'paged' entry in the Traffic Matrix table.deprecated S3EnetPagedTrafEntry .1.3.6.1.4.1.45.1.3.2.9.3.1 |
s3EnetTrafPageNoA specific page in the Traffic Matrix table.rodeprecated INTEGER .1.3.6.1.4.1.45.1.3.2.9.3.1.1 |
s3EnetTrafPageEntriesThis OCTET STRING contains up to 20 valid Traffic
Matrix table entries. The entries will not be in any
logical order. Each entry consists of a 20-byte octet
string including a 6-byte source MAC address, a 6-byte
destination MAC address, a received good frame count,
and a byte count in good frames received. The counters
are 4-bytes each where the first one is high-order byte
and the last one is low-order byte.rodeprecated OCTET STRING .1.3.6.1.4.1.45.1.3.2.9.3.1.2 |
s3EnetTrafAgeIntervalThe time used for aging of the nodes in tables
s3EnetSdTrafTable and s3EnetDsTrafTable.
Once a node has completely aged it will be
removed from these tables.
Note:
Agents that do not implement this object
(i.e., agents prior to version 5.3) use the
object s3EnetNodeAgeInterval to perform this
function.rwdeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.9.4 |
s3000EnetPlusStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.10 |
s3EnetPlusPortTableThis table provides a list of entries, each entry
providing information related to frame MAC level
error conditions per port. This table is conceptually
an extension to the s3EnetPortTable and is
only implemented by the 3313S and 3314S NMMs. SEQUENCE OF S3EnetPlusPortEntry .1.3.6.1.4.1.45.1.3.2.10.1 |
s3EnetPlusPortEntryAn entry in the Plus Port table. S3EnetPlusPortEntry .1.3.6.1.4.1.45.1.3.2.10.1.1 |
s3EnetPlusPortBoardIndexA unique value for each board. Its value ranges between
1 and 12. (This is the slot number.)ro INTEGER .1.3.6.1.4.1.45.1.3.2.10.1.1.1 |
s3EnetPlusPortIndexA unique value for each port. Its value typically ranges
between 1 and 12.ro INTEGER .1.3.6.1.4.1.45.1.3.2.10.1.1.2 |
s3EnetPortFragmentsThis contains a count of fragments received by the
board between 80-512 bits (64 bytes), inclusively,
with invalid FCS or alignment errors. (These
commonly represent collision fragments, and are
not errors. Collision fragments were called
FragErrors in the rev 3.x MIB, and were counted
only on a per-board basis.)ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.3 |
s3EnetPortShortEventsThis contains a count of fragments received by the
port shorter than 80 bits.ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.4 |
s3EnetPortAutoPartitionsThis contains a count of times the ports on the board
have autopartitioned due to excessive collisions (more
than 32 consecutive collisions). This count is an
approximation and may be less than the total count.ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.5 |
s3EnetPortRateMismatchesThis contains a count of the occurrences of out of
spec bit rates. This indicates the number of times
FIFO buffer over-runs or underruns due to transmission
rate errors.ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.6 |
s3EnetPortJabbersThis contains a count of the times that MAU jabber
lockup protection (MJLP) was invoked because transmission
of data from this port exceeded 5 msec in duration.
This information can be useful in identifying faulty
stations.ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.7 |
s3EnetPortLastSrcAddrThis is the source address of the last packet
received through this port.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.10.1.1.8 |
s3EnetPortSrcAddrChangesThis is the number of times that the
s3EnetPortLastSrcAddr object for this has changed.ro Counter .1.3.6.1.4.1.45.1.3.2.10.1.1.9 |
s3EnetPlusBoardTableThis table provides a list of entries, each entry
providing information related to frame MAC level
error conditions per board. This table is conceptually
an extension to the s3EnetboardTable and is
only implemented by the 3313S and 3314S NMMs. SEQUENCE OF S3EnetPlusBoardEntry .1.3.6.1.4.1.45.1.3.2.10.2 |
s3EnetPlusBoardEntryAn entry in the Plus Board table. S3EnetPlusBoardEntry .1.3.6.1.4.1.45.1.3.2.10.2.1 |
s3EnetPlusBoardIndexThe board number part of an index.ro INTEGER .1.3.6.1.4.1.45.1.3.2.10.2.1.1 |
s3EnetBoardFragmentsThis contains a count of fragments received by the
board between 80-512 bits (64 bytes), inclusively,
with invalid FCS or alignment errors. (These
commonly represent collision fragments, and are
not errors. Collision fragments were called
FragErrors in the rev 3.x MIB, and were counted
only on a per-concentrator basis.)ro Counter .1.3.6.1.4.1.45.1.3.2.10.2.1.2 |
s3EnetBoardShortEventsThis contains a count of fragments received by
the board shorter than 80 bits.ro Counter .1.3.6.1.4.1.45.1.3.2.10.2.1.3 |
s3EnetBoardAutoPartitionsThis contains a count of times the ports on this
board have been autopartitioned due to excessive
collisions (more than 32 consecutive collisions).
This count is an approximation and may be less than
the total count.ro Counter .1.3.6.1.4.1.45.1.3.2.10.2.1.4 |
s3EnetBoardRateMismatchesThis contains a count of the occurrences of out of
spec bit rates. This indicates the number of times
FIFO buffer over-runs or underruns due to
transmission rate errors.ro Counter .1.3.6.1.4.1.45.1.3.2.10.2.1.5 |
s3EnetBoardJabbersThis contains a count of the times that MAU jabber
lockup protection (MJLP) was invoked because
transmission of data from a port on this board
exceeded 5 msec in duration. This information can
be useful in identifying faulty stations.ro Counter .1.3.6.1.4.1.45.1.3.2.10.2.1.6 |
s3000EnetPlusConc OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.10.3 |
s3EnetConcShortEventsThis contains a count of fragments received by
the concentrator shorter than 80 bits.ro Counter .1.3.6.1.4.1.45.1.3.2.10.3.1 |
s3EnetConcAutoPartitionsThis contains a count of times the ports on this
concentrator have been autopartitioned due to
excessive collisions (more than 32 consecutive
collisions). This count is based on a one-bit
counter (flag) per port in the host modules, and
will not always represent the total count.ro Counter .1.3.6.1.4.1.45.1.3.2.10.3.2 |
s3EnetConcRateMismatchesThis contains a count of the occurrences of out
of spec bit rates. This indicates the number of
times FIFO buffer over-runs or underruns due to
transmission rate errors.ro Counter .1.3.6.1.4.1.45.1.3.2.10.3.3 |
s3EnetConcJabbersThis contains a count of the times that MAU jabber
lockup protection (MJLP) was invoked because
transmission of data from a port on this
concentrator exceeded 5 msec in duration.
This information can be useful in identifying
faulty stations.ro Counter .1.3.6.1.4.1.45.1.3.2.10.3.4 |
s3EnetConcCollBackoffErrorsThis contains a total concentrator count of the
collision events that occur during the normal
collision window (i.e., the collisions is not
a late collision) and do not have a runt error.ro Counter .1.3.6.1.4.1.45.1.3.2.10.3.5 |
s3000EnetFrameSizeDist OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.11 |
s3EnetFrSizePortTableThis table provides a list of entries, each entry
providing information related to frame sizes of
packets received on a port. The variables
defined for the entries are only supported
by 3313S and 3314S NMM. SEQUENCE OF S3EnetFrSizePortEntry .1.3.6.1.4.1.45.1.3.2.11.1 |
s3EnetFrSizePortEntryAn entry in the FrSize Port table. S3EnetFrSizePortEntry .1.3.6.1.4.1.45.1.3.2.11.1.1 |
s3EnetFrSizePortBoardIndexA unique value for each board. Its value ranges
between 1 and 12. (This is the slot number.)ro INTEGER .1.3.6.1.4.1.45.1.3.2.11.1.1.1 |
s3EnetFrSizePortIndexA unique value for each port. Its value typically
ranges between 1 and 12.ro INTEGER .1.3.6.1.4.1.45.1.3.2.11.1.1.2 |
s3EnetFrSizePort64to127This contains a count of frames received by the
port that are in the range of 64 octets to 127
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.1.1.3 |
s3EnetFrSizePort128to255This contains a count of frames received by the
port that are in the range of 128 octets to 255
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.1.1.4 |
s3EnetFrSizePort256to511This contains a count of frames received by the
port that are in the range of 256 octets to 511
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.1.1.5 |
s3EnetFrSizePort512to1023This contains a count of frames received by the
port that are in the range of 512 octets to 1023
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.1.1.6 |
s3EnetFrSizePort1024to1518This contains a count of frames received by the
port that are in the range of 1024 octets to 1518
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.1.1.7 |
s3EnetFrSizeBoardTableThis table provides a list of entries, each entry
providing information related to frame MAC level
error conditions per board. The variables defined
for the entries are only supported by 3313S and
3314S NMMs. The use of any variable in this table
for other NMMs will cause the NMMs to return
noSuchName error status in the response. SEQUENCE OF S3EnetFrSizeBoardEntry .1.3.6.1.4.1.45.1.3.2.11.2 |
s3EnetFrSizeBoardEntryAn entry in the FrSize Board table. S3EnetFrSizeBoardEntry .1.3.6.1.4.1.45.1.3.2.11.2.1 |
s3EnetFrSizeBoardIndexA unique value for each board. Its value ranges between
1 and 12. (This is the slot number.)ro INTEGER .1.3.6.1.4.1.45.1.3.2.11.2.1.1 |
s3EnetFrSizeBoard64to127This contains a count of frames received by the
board that are in the range of 64 octets to 127
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.2.1.2 |
s3EnetFrSizeBoard128to255This contains a count of frames received by the
board that are in the range of 128 octets to 255
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.2.1.3 |
s3EnetFrSizeBoard256to511This contains a count of frames received by the
board that are in the range of 256 octets to 511
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.2.1.4 |
s3EnetFrSizeBoard512to1023This contains a count of frames received by the
board that are in the range of 512 octets to 1023
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.2.1.5 |
s3EnetFrSizeBoard1024to1518This contains a count of frames received by the
board that are in the range of 1024 octets to 1518
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.2.1.6 |
s3000EnetFrameConc OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.11.3 |
s3EnetFrSizeConc64to127This contains a count of frames received by the
concentrator that are in the range of 64 octets to 127
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.3.1 |
s3EnetFrSizeConc128to255This contains a count of frames received by the
concentrator that are in the range of 128 octets to 255
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.3.2 |
s3EnetFrSizeConc256to511This contains a count of frames received by the
concentrator that are in the range of 256 octets to 511
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.3.3 |
s3EnetFrSizeConc512to1023This contains a count of frames received by the
concentrator that are in the range of 512 octets to 1023
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.3.4 |
s3EnetFrSizeConc1024to1518This contains a count of frames received by the
concentrator that are in the range of 1024 octets to 1518
octets, inclusive.ro Counter .1.3.6.1.4.1.45.1.3.2.11.3.5 |
s3000EnetProtoTypeDist OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.12 |
s3EnetProtoPortTableThis table provides a list of entries, each entry
providing information related to packet protocol
type distributions per port. The variables defined
for the entries are only supported by 3313S and
3314S NMMs. The use of any variable in this table
for other NMMs will cause the NMMs to return
noSuchName error status in the response. SEQUENCE OF S3EnetProtoPortEntry .1.3.6.1.4.1.45.1.3.2.12.1 |
s3EnetProtoPortEntryAn entry in the Proto Port table. S3EnetProtoPortEntry .1.3.6.1.4.1.45.1.3.2.12.1.1 |
s3EnetProtoPortBoardIndexA unique value for each board. Its value ranges between
1 and 12. (This is the slot number.)ro INTEGER .1.3.6.1.4.1.45.1.3.2.12.1.1.1 |
s3EnetProtoPortIndexA unique value for each port. Its value typically ranges
between 1 and 12.ro INTEGER .1.3.6.1.4.1.45.1.3.2.12.1.1.2 |
s3EnetProtoPort8023FramesThis contains a count of frames received by the
port that are of 802.3 type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.3 |
s3EnetProtoPortEthernetFramesThis contains a count of frames received by the
port that are of Ethernet type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.4 |
s3EnetProtoPortOtherFramesThis contains a count of frames received by the
port that are of types not counted by individual
counters below.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.5 |
s3EnetProtoPortSnaFramesThis contains a count of frames received by the
port that are of SNA type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.6 |
s3EnetProtoPortIpFramesThis contains a count of frames received by the
port that are of IP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.7 |
s3EnetProtoPortIsoFramesThis contains a count of frames received by the
port that are of ISO type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.8 |
s3EnetProtoPortArpFramesThis contains a count of frames received by the
port that are of ARP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.9 |
s3EnetProtoPortDecIVFramesThis contains a count of frames received by the
port that are of DECIV type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.10 |
s3EnetProtoPortDecLatFramesThis contains a count of frames received by the
port that are of DECLAT type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.11 |
s3EnetProtoPortEthTalkFramesThis contains a count of frames received by the
port that are of EtherTalk type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.12 |
s3EnetProtoPortXnsFramesThis contains a count of frames received by the
port that are of XNS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.13 |
s3EnetProtoPortIpxFramesThis contains a count of frames received by the
port that are of IPX type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.14 |
s3EnetProtoPortDecLavcFramesThis contains a count of frames received by the
port that are of DEC LAVC type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.15 |
s3EnetProtoPortNetBiosFramesThis contains a count of frames received by the
port that are of NETBIOS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.16 |
s3EnetProtoPortBrdgSpanTreeFramesThis contains a count of frames received by the
port that are of Bridge Spanning Tree type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.1.1.17 |
s3EnetProtoBoardTableThis table provides a list of entries, each entry
providing information related to packet protocol
type distribution per board. The variables defined
for the entries are only supported by 3313S and
3314S NMMs. The use of any variable in this table
for other NMMs will cause the NMMs to return
noSuchName error status in the response. SEQUENCE OF S3EnetProtoBoardEntry .1.3.6.1.4.1.45.1.3.2.12.2 |
s3EnetProtoBoardEntryAn entry in the Proto Board table. S3EnetProtoBoardEntry .1.3.6.1.4.1.45.1.3.2.12.2.1 |
s3EnetProtoBoardIndexA unique value for each board. Its value ranges between
1 and 12. (This is the slot number.)ro INTEGER .1.3.6.1.4.1.45.1.3.2.12.2.1.1 |
s3EnetProtoBoard8023FramesThis contains a count of frames received by the
board that are of 802.3 type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.2 |
s3EnetProtoBoardEthernetFramesThis contains a count of frames received by the
board that are of Ethernet type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.3 |
s3EnetProtoBoardOtherFramesThis contains a count of frames received by the
board that are of types not specified below.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.4 |
s3EnetProtoBoardSnaFramesThis contains a count of frames received by the
board that are of SNA type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.5 |
s3EnetProtoBoardIpFramesThis contains a count of frames received by the
board that are of IP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.6 |
s3EnetProtoBoardIsoFramesThis contains a count of frames received by the
board that are of ISO type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.7 |
s3EnetProtoBoardArpFramesThis contains a count of frames received by the
board that are of ARP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.8 |
s3EnetProtoBoardDecIVFramesThis contains a count of frames received by the
board that are of DECIV type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.9 |
s3EnetProtoBoardDecLatFramesThis contains a count of frames received by the
board that are of DECLAT type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.10 |
s3EnetProtoBoardEthTalkFramesThis contains a count of frames received by the
board that are of EtherTalk type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.11 |
s3EnetProtoBoardXnsFramesThis contains a count of frames received by the
board that are of XNS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.12 |
s3EnetProtoBoardIpxFramesThis contains a count of frames received by the
board that are of IPX type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.13 |
s3EnetProtoBoardDecLavcFramesThis contains a count of frames received by the
board that are of DEC LAVC type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.14 |
s3EnetProtoBoardNetBiosFramesThis contains a count of frames received by the
board that are of NETBIOS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.15 |
s3EnetProtoBoardBrdgSpanTreeFramesThis contains a count of frames received by the
board that are of Bridge Spanning Tree type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.2.1.16 |
s3000EnetProtoConc OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.12.3 |
s3EnetProtoConc8023FramesThis contains a count of frames received by the
concentrator that are of 802.3 type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.1 |
s3EnetProtoConcEthernetFramesThis contains a count of frames received by the
concentrator that are of Ethernet type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.2 |
s3EnetProtoConcOtherFramesThis contains a count of frames received by the
concentrator that are of types not specified below.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.3 |
s3EnetProtoConcSnaFramesThis contains a count of frames received by the
concentrator that are of SNA type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.4 |
s3EnetProtoConcIpFramesThis contains a count of frames received by the
concentrator that are of IP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.5 |
s3EnetProtoConcIsoFramesThis contains a count of frames received by the
concentrator that are of ISO type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.6 |
s3EnetProtoConcArpFramesThis contains a count of frames received by the
concentrator that are of ARP type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.7 |
s3EnetProtoConcDecIVFramesThis contains a count of frames received by the
concentrator that are of DECIV type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.8 |
s3EnetProtoConcDecLatFramesThis contains a count of frames received by the
concentrator that are of DECLAT type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.9 |
s3EnetProtoConcEthTalkFramesThis contains a count of frames received by the
concentrator that are of EtherTalk type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.10 |
s3EnetProtoConcXnsFramesThis contains a count of frames received by the
concentrator that are of XNS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.11 |
s3EnetProtoConcIpxFramesThis contains a count of frames received by the
concentrator that are of IPX type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.12 |
s3EnetProtoConcDecLavcFramesThis contains a count of frames received by the
concentrator that are of DEC LAVC type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.13 |
s3EnetProtoConcNetBiosFramesThis contains a count of frames received by the
concentrator that are of NETBIOS type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.14 |
s3EnetProtoConcBrdgSpanTreeFramesThis contains a count of frames received by the
concentrator that are of Bridge Spanning Tree type.ro Counter .1.3.6.1.4.1.45.1.3.2.12.3.15 |
s3000EnetHosts OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2.13 |
s3EnetHostTableSizeThe current number of entries in table s3EnetHostTable.ro INTEGER .1.3.6.1.4.1.45.1.3.2.13.1 |
s3EnetHostLastDeleteTimeThe value of sysUpTime when the last entry was
deleted from table s3EnetHostTable due to a shortage
of resources. If no deletions have occurred, then
the value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.13.2 |
s3EnetHostTableA Table containing MAC/Network address pairs
that have been detected on the segment. SEQUENCE OF S3EnetHostEntry .1.3.6.1.4.1.45.1.3.2.13.3 |
s3EnetHostEntryA row in the table of MAC/Network address
pairs. Entries can not be created or deleted
via SNMP operations. New entries are added when
a new MAC/Network address pair is detected.
An entry is removed to add a new entry when
the table is full. The entry that is removed is
the one that has been least recently observed. S3EnetHostEntry .1.3.6.1.4.1.45.1.3.2.13.3.1 |
s3EnetHostIndexThe index of the MAC/Network address pair.
The value is between 1 and N, where N is the value
of s3EnetHostTableSize. The association of this
index to a pair may change when a pair is removed
from the table due to a resource shortage.
s3EnetHostLastDeleteTime must be monitored to
determine when this condition has occured.ro INTEGER .1.3.6.1.4.1.45.1.3.2.13.3.1.1 |
s3EnetHostObserveOrderThe relative ordering of the MAC/Network adddress
pair. There is a global value that starts at 1 and
increases by one for each observation of an address
pair. When the maximum value of 65535 is reached,
the next value will be 1. The global value is used
to update this object each time the MAC/Network address
pair is observed (and when the entry is initially
created). Since the global value starts over again
after it reaches its maximum value, there may be
more than one entry that has the same value.ro INTEGER .1.3.6.1.4.1.45.1.3.2.13.3.1.2 |
s3EnetHostNetAddrThe network address (in network order) of the
MAC/Network address pair.ro OCTET STRING .1.3.6.1.4.1.45.1.3.2.13.3.1.3 |
s3EnetHostAddrTypeThe type of address that is stored in the object
s3EnetHostNetAddr for this entry. The values are:
other(1)...Unknown type
ip(2)......IP address
ipx(3).....IPX addressro Enumeration .1.3.6.1.4.1.45.1.3.2.13.3.1.4 |
s3EnetHostMacAddressThe MAC address (in canonical order) of the
MAC/Network address pair.ro PhysAddress .1.3.6.1.4.1.45.1.3.2.13.3.1.5 |
s3EnetHostSlotIndexThe board index that the host is connected through.ro INTEGER .1.3.6.1.4.1.45.1.3.2.13.3.1.6 |
s3EnetHostPortIndexThe port index that the host is connected through.ro INTEGER .1.3.6.1.4.1.45.1.3.2.13.3.1.7 |
s3EnetHostLearnMethodIndicates the method that was used to discover the
MAC/Network address pair. The methods that can be
used for discovery are shown below.
other(1).........Indicates an unknown discovery
method.
arpRequest(2)....Indicates that ARP request packets
were used for discovery.
arpResponse(3)...Indicates that ARP response packets
were used for discovery.
ripRequest(4)....Indicates that RIP request packets
were used for discovery.
ripResponse(5)...Indicates that RIP response packets
were used for discovery.ro Enumeration .1.3.6.1.4.1.45.1.3.2.13.3.1.8 |
s3EnetHostTimeStampThe value of sysUpTime when the MAC/Network address
pair was last observed on the segment.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.2.13.3.1.9 |