S5-TOKENRING-COMMON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
135
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
135 total| Object Name |
|---|
RFC1155-SMIA table containing information about each
port on a board. The number of entries
is determined by the number of manageable
ports. Those boards that do not have any
manageable ports do not have
any entries in this table. SEQUENCE OF S5TrPortEntry .1.3.6.1.4.1.45.1.6.7.1.1 |
s5TrFpuTableA table containing information about each
FPU (Frame Processing Unit) on a board. SEQUENCE OF S5TrFpuEntry .1.3.6.1.4.1.45.1.6.7.1.2 |
s5TrFpuEntryA row in the Token Ring FPU table. Entries
can not be created or deleted via SNMP. S5TrFpuEntry .1.3.6.1.4.1.45.1.6.7.1.2.1 |
s5TrFpuBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.2.1.1 |
s5TrFpuIndxThe index of the FPU on the board. The
value ranges between 1 and the number
of FPUs on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.2.1.2 |
s5TrFpuTypeThe type of FPU. The values are:
other(1).....other or unknown
cluster(2)...FPU is associated with
a cluster
port(3)......FPU is associated with
a port
roving(4)....FPU is a virtual one due
to roving embedded
management FPU. The
type index s5TrFpuTypeIndx
specifies port number in
this case.
This describes at what point an FPU
is connected so that it can collect
information.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.2.1.3 |
s5TrFpuTypeIndxThe index of the cluster or port
that the FPU is associated with. The
object s5TrFpuType type specifies the
type.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.2.1.4 |
s5TrFpuVerThe version of the FPU. If not available,
then the value is a zero length string.roobsolete DisplayString .1.3.6.1.4.1.45.1.6.7.1.2.1.5 |
s5TrFpuCapabilitesThe capabilities of the FPU.
The values are:
other (1)...............Other or unknown
coreStatistics(2).......Core statistics FPU
embeddedManagement(3)...FPU capable of core
statistics and roving;
both features are
mutually exclusive.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.2.1.6 |
s5TrFpuRunningModeThe running mode of the FPU. These values
are for both read and write with the exception
of other(1) which is for read only.
The values are:
other(1).......................Other or unknown
coreStatistics(2)..............FPU running in core
statistics mode.
roving(4)......................FPU running in roving mode;
Note: core statistics is
unavailable in this mode.
securityRoving(5)..............FPU running in roving mode
due to authorized nodes
security being turned on.rw Enumeration .1.3.6.1.4.1.45.1.6.7.1.2.1.7 |
s5TrAttTableA table containing information about each
Token Ring attachment point on a board. This
table extends table s5ChasAttTable for Token
Ring Boards. SEQUENCE OF S5TrAttEntry .1.3.6.1.4.1.45.1.6.7.1.3 |
s5TrAttEntryA row in Token Ring attachment table. Entries
can not be created or deleted via SNMP. S5TrAttEntry .1.3.6.1.4.1.45.1.6.7.1.3.1 |
s5TrAttBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.3.1.1 |
s5TrAttIndxThe index of the attachment point on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.3.1.2 |
s5TrAttDfltSpeedThe default speed setting for the attachment
point. The values are:
other(1).....unknown or other speed
s4Mbit(2)....4Mbit
s16Mbit(3)...16Mbitro Enumeration .1.3.6.1.4.1.45.1.6.7.1.3.1.3 |
s5TrAttCurSpeedThe current speed setting for the attachment
point. The read-only value is:
other(1).....unknown or other speed
The read-write values are:
s4Mbit(2)....4Mbit
s16Mbit(3)...16Mbitrw Enumeration .1.3.6.1.4.1.45.1.6.7.1.3.1.4 |
s5TrAttFaultA fault indicator for the attachment point.
The values are:
other(1).....not connected to a backplane network
or value is unknown
nofault(2)...no fault detected
fault(3).....fault detected.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.3.1.5 |
s5TrBkDivSetting of the Token Ring backplane divider.
The value that can only be read is:
other(1)...unknown or other state
Values that can be read and written are:
split(2)...split the backplane
join(3)....join the backplanerw Enumeration .1.3.6.1.4.1.45.1.6.7.1.4 |
s5TrRingExt OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.7.1.5 |
s5TrRingExtLastChangeThe value of sysUpTime when the last change
of any Ring Extension table entry within the
chassis was detected.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.7.1.5.1 |
s5TrRingExtCurNumThe current number of entries in the Ring
Extension Table.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.2 |
s5TrRingExtTableA table containing information about each
RI/RO (Ring In / Ring Out) pair on a board.
The number of entries is determined by the
number of existing RI/RO pairs. Those boards
that do not have any RI/RO do not have any
entries in this table. SEQUENCE OF S5TrRingExtEntry .1.3.6.1.4.1.45.1.6.7.1.5.3 |
s5TrRingExtEntryA row in the Ring Extension table.
Entries can not be created or deleted via
SNMP. S5TrRingExtEntry .1.3.6.1.4.1.45.1.6.7.1.5.3.1 |
s5TrRingExtBoardIndxThe index of the board which has RI/RO.
This corresponds to the index of the slot
containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.1 |
s5TrRingExtExtensionIndxThe index of the RI/RO extension pair
on the board. The value ranges between 1
and the number of RI/RO pairs on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.2 |
s5TrRingExtRingNumberThe logical ring number of the ring
that RI/RO connects to.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.3 |
s5TrRingExtRingInUnaThe upstream neighbor address to the
Ring In port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.5.3.1.4 |
s5TrRingExtRingOutUnaThe upstream neighbor address to the
Ring Out port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.5.3.1.5 |
s5TrRingExtSecUnaThe (secondary) upstream neighbor
address as read by the FPU that is
located between RI and RO.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.5.3.1.6 |
s5TrRingExtRingInPhanStatusThe phantom status of the Ring In port.
The values are:
other(1).........status unknown
noPhantom(2).....no phantom signal
phantom(3).......phantom signal is on.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.5.3.1.7 |
s5TrRingExtRingOutPhanStatusThe phantom status of the Ring Out port.
The values are:
other(1).........status unknown
noPhantom(2).....no phantom signal
phantom(3).......phantom signal is on.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.5.3.1.8 |
s5TrRingExtRingInWrapStatusThe wrap status of the Ring-In port.
The values are:
other(1)............wrap status unknown
wrap(2).............port is wrapped
connect(3)..........port is unwrappedro Enumeration .1.3.6.1.4.1.45.1.6.7.1.5.3.1.9 |
s5TrRingExtRingOutWrapStatusThe wrap status of the Ring-Out port.
The values are:
other(1)............wrap status unknown
wrap(2).............port is wrapped
connect(3)..........port is unwrappedro Enumeration .1.3.6.1.4.1.45.1.6.7.1.5.3.1.10 |
s5TrRingExtClusterNumberThe cluster number where RI/RO pair is
located on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.11 |
s5TrRingExtRingInPortNumberThe port number where RI is located on
the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.12 |
s5TrRingExtRingOutPortNumberThe port number where RO is located on
the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.3.1.13 |
s5TrRingExtEosSizeThe current size of a 'row' in the table
s5TrRingExtEosTable. This allows applications
to be able to break apart 'rows' in the table.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.5.4 |
s5TrRingExtEosTableA table of encoded octet strings of
entries in table s5TrRingExtTable.
The number of entries is determined by the
packing of 'rows' from s5TrRingExtTable. SEQUENCE OF S5TrRingExtEosEntry .1.3.6.1.4.1.45.1.6.7.1.5.5 |
s5TrRingExtEosEntryA row in the table of encoded octet
strings for table s5TrRingExtTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is the
instance of the last record
contained in the octet string.
Entries in the table can not be created
or deleted via SNMP. S5TrRingExtEosEntry .1.3.6.1.4.1.45.1.6.7.1.5.5.1 |
s5TrRingExtEosAn encoded octet string. On reads it contains
an integral number of 'rows' from table
s5TrRingExtTable. All 'rows' are the same size
which is defined by object s5TrRingExtEosSize.ro OCTET STRING .1.3.6.1.4.1.45.1.6.7.1.5.5.1.1 |
s5TrPortInfoTableA table containing information for each managed
token ring connectivity port on a board, excluding
ring in, ring out, and those used as cascade expansion.
The number of entries is determined by
the number of manageable ports and the number
of occupied slots in s5ChasComTable whose
s5ChasComType is of a token Ring type and
is on the same backplane ring as the NMM interface. SEQUENCE OF S5TrPortInfoEntry .1.3.6.1.4.1.45.1.6.7.1.6 |
s5TrPortInfoEntryA row in the port information table.
Entries can not be created or
deleted via SNMP. S5TrPortInfoEntry .1.3.6.1.4.1.45.1.6.7.1.6.1 |
s5TrPortInfoSrcIndxThis index identifies the source of the
information. Only those sources that provide
these statistics are in this table.ro SrcIndx (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.7.1.6.1.1 |
s5TrPortInfoBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.6.1.2 |
s5TrPortInfoPortIndxThe index of the port on the board.
Its value ranges between 1 and the
number of manageable ports on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.6.1.3 |
s5TrPortInfoAddrThe MAC address of the station currently/last
attached to the port.
If no station in the ring can be found
attached to the port, the address should be 0ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.6.1.4 |
s5TrPortInfoLastNaunThe MAC address of the last known NAUN (Next
Active Upstream Neighbor) of the station
currently/last attached to the port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.6.1.5 |
s5TrPortInfoStationStatusThe insertion status of the station currently/last
attached to the port. The values are:
active(1)..........Actively participating in
ring poll from this port
notInRingPoll(2)...Detected on the ring, but
not currently participating
in the ring poll from this port
inactive(3)........ No longer on the ring
from this port
forcedRemoval(4)... forced off the ring from this port
by network management.ro Enumeration .1.3.6.1.4.1.45.1.6.7.1.6.1.6 |
s5TrPortInfoFirstEnterTimeThe value of sysUpTime when this port first time
entered the ring.
If the time is unknown, the value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.7.1.6.1.7 |
s5TrPortInfoLastEnterTimeThe value of sysUpTime when this port last time entered
the ring.
If the time is unknown, the value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.7.1.6.1.8 |
s5TrPortInfoLastExitTimeThe value of sysUpTime when this port last
exited the ring.
If the time is unknown, the value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.6.7.1.6.1.9 |
s5TrPortInfoDupAddrErrsTotal number of duplicate address error
detected from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.10 |
s5TrPortInfoLineErrsTotal number of line errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.11 |
s5TrPortInfoInternalErrsTotal number of adapter internal errors
detected from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.12 |
s5TrPortInfoBurstErrsTotal number of burst errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.13 |
s5TrPortInfoACErrsTotal number of AC (Address Copied)
errors detected from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.14 |
s5TrPortInfoAbortErrsTotal number of abort delimiter
transmitted errors detected from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.15 |
s5TrPortInfoLostFrameErrsTotal number of lost frame errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.16 |
s5TrPortInfoCongestionErrsTotal number of receive congestion errors
detected from this port .ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.17 |
s5TrPortInfoFrameCopiedErrsTotal number of frame copied errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.18 |
s5TrPortInfoFrequencyErrsTotal number of frequency errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.19 |
s5TrPortInfoTokenErrsTotal number of token errors detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.20 |
s5TrPortInfoBeaconErrsTotal number of beacon frames detected
from this port.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.21 |
s5TrPortInfoInsertionsTotal number of times that the port
was detected inserting into the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.1.6.1.22 |
s5TrPortFpuStatsTableA table containing FPU statistics
information for each managed token ring
connectivity port on a board. SEQUENCE OF S5TrPortFpuStatsEntry .1.3.6.1.4.1.45.1.6.7.1.7 |
s5TrPortFpuStatsEntryA row in the Port FPU statistics table.
Entries can not be created or deleted via SNMP. S5TrPortFpuStatsEntry .1.3.6.1.4.1.45.1.6.7.1.7.1 |
s5TrPortFpuStatsBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.7.1.1 |
s5TrPortFpuStatsPortIndxThe index of the port on the board. The
value ranges between 1 and the number
of manageable ports on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.7.1.7.1.2 |
s5TrPortFpuStatsAddrThe MAC address of the station currently/last
attached to the port.
For ring in, ring out and cascade expansion ports,
this MAC address is the UNA (Upstream Neighbor
Address) as seen by the port.
If no station has ever been connected to this port,
the address should be zero.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.1.7.1.3 |
s5TrPortFpuStatsTxOctetsTotal number of octets transmitted at this port.
If no station is connected to the port,
the counter should return the last collected value.ro Counter .1.3.6.1.4.1.45.1.6.7.1.7.1.4 |
s5TrPortFpuStatsTxPktsTotal number of packets transmitted at this port.
If no station is connected to the port,
the counter should return the last collected value.ro Counter .1.3.6.1.4.1.45.1.6.7.1.7.1.5 |
s5TrPortFpuStatsRxOctetsTotal number of octets received at this port.
If no station is connected to the port,
the counter should return the last collected value.ro Counter .1.3.6.1.4.1.45.1.6.7.1.7.1.6 |
s5TrPortFpuStatsRxPktsThe number of packets receive at this port.
If no station is connected to the port,
the counter should return the last collected value.ro Counter .1.3.6.1.4.1.45.1.6.7.1.7.1.7 |
s5TrBStatTableA table containing Token Ring basic
statistics. The entries in the table
may come from several different data
sources including FPUs (Frame Processing
Units) and MACs on NMMs (Network Management
Modules). The number of entries is
determined by the number of sources
that can provide the information. SEQUENCE OF S5TrBStatEntry .1.3.6.1.4.1.45.1.6.7.2.1 |
s5TrBStatEntryA row in Token Ring basic statistics
table. Entries can not be created or
deleted via SNMP. S5TrBStatEntry .1.3.6.1.4.1.45.1.6.7.2.1.1 |
s5TrBStatSrcIndxThe index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table.ro SrcIndx (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.7.2.1.1.1 |
s5TrBStatTtlOctetsThe total number of octets of data in LLC
frames and MAC frames (including frames with
errors) measured on the ring (excluding
framing bits, but including FCS octets).ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.2 |
s5TrBStatMacOctetsThe total number of octets of data in MAC
frames (including frames with errors) measured
on the ring (excluding framing bits,
but including FCS octets).ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.3 |
s5TrBStatLlcOctetsThe total number of octets of data in LLC
frames (including frames with errors) measured
on the ring (excluding framing bits,
but including FCS octets).ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.4 |
s5TrBStatTtlFrmsThe total number of LLC frames and MAC
frames (including frames with errors)
detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.5 |
s5TrBStatTtlGoodFrmsThe total number of LLC frames and MAC
frames (excluding frames with errors)
detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.6 |
s5TrBStatTtlBadFrmsThe total number of LLC frames and MAC
frames with errors detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.7 |
s5TrBStatMacFrmsThe total number of MAC frames (including frames
with errors) detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.8 |
s5TrBStatLlcFrmsThe total number of LLC frames (including
frames with errors) detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.9 |
s5TrBStatLlcNonUcastFrmsThe total number of LLC frames (including
frames with errors) detected on the ring
that were directed to a LLC broadcast address
(i.e., 0xFFFFFFFFFFFF or 0xC000FFFFFFFF) or
a local or global multicast or functional
address (i.e., 0xC000xxxxxxxx).ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.10 |
s5TrBStatLlcUcastFrmsThe total number of LLC frames (including
frames with errors) detected on the ring
that were directed to a LLC unicast address.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.11 |
s5TrBStatGoodErrReportFrmsThe total number of Soft error Report frames
(excluding frames with errors) detected on
the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.12 |
s5TrBStatBeaconFrmsThe total number of Beacon frames (including
frames with errors) detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.13 |
s5TrBStatRingPurgeFrmsThe total number of Ring Purge frames (including
frames with errors) detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.14 |
s5TrBStatClaimTokenFrmsThe total number of Claim Token frames (including
frames with errors) detected on the ring.ro Counter .1.3.6.1.4.1.45.1.6.7.2.1.1.15 |
s5TrBStatUnaThe MAC address of the next active upstream
neighbor (NAUN) (or upstream neighbor address (UNA))
of the ring monitoring source. If it is unknown
or at power reset (for example, no activity on the
ring), the value is 00:00:00:00:00:00. The old
value of the NAUN will be held, even if the ring
becomes inactive (i.e., it will not clear to zero
after no activity).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.45.1.6.7.2.1.1.16 |
s5TrFStatTableA table containing Token Ring frame
size distribution statistics. These
statistics are for LLC frames.
Counters for frames and octets can
be found in the basic statistics table.
The entries in this table may come from
several different data sources.
The number of entries is determined
by the number of sources that can
provide the information.obsolete SEQUENCE OF S5TrFStatEntry .1.3.6.1.4.1.45.1.6.7.2.2 |
s5TrFStatEntryA row in Token Ring frame size
distribution statistics table.
Entries can not be created or deleted
via SNMP.obsolete S5TrFStatEntry .1.3.6.1.4.1.45.1.6.7.2.2.1 |
s5TrFStatSrcIndxThe index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table.roobsolete SrcIndx (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.7.2.2.1.1 |
s5TrFStatDropEventsThe total number of events in which frames
were dropped by the data source due to
lack of resources.
Note that this number is not necessarily the
number of frames dropped; it is just the number
of times this condition has been detected.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.2 |
s5TrFStatLlcFrms18to63OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 18 and 63 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.3 |
s5TrFStatLlcFrms64to127OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 64 and 127 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.4 |
s5TrFStatLlcFrms128to255OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 128 and 255 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.5 |
s5TrFStatLlcFrms256to511OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 256 and 511 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.6 |
s5TrFStatLlcFrms512to1023OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 512 and 1023 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.7 |
s5TrFStatLlcFrms1024to2047OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 1024 and 2047 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.8 |
s5TrFStatLlcFrms2048to4095OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 2048 and 4095 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.9 |
s5TrFStatLlcFrms4096to8191OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 4096 and 8191 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.10 |
s5TrFStatLlcFrms8192to18000OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were between 8192 and 18000 octets in
length inclusive, excluding framing bits
but including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.11 |
s5TrFStatLlcFrmsGreaterThan18000OctetsThe total number of LLC frames (excluding
frames with errors) measured on the ring
that were greater than 18000 octets in
length, excluding framing bits but
including FCS octets.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.2.1.12 |
s5TrEStatTableA table containing Token Ring error
statistics. The entries in the table
may come from several different data
sources. The number of entries is
determined by the number of sources
that can provide the information. (For
example, this table is valid only on NMMs
when they have become a Ring Error Monitor
(REM). SEQUENCE OF S5TrEStatEntry .1.3.6.1.4.1.45.1.6.7.2.3 |
s5TrEStatEntryA row in Token Ring error statistics table.
Entries can not be created or deleted via
SNMP. S5TrEStatEntry .1.3.6.1.4.1.45.1.6.7.2.3.1 |
s5TrEStatSrcIndxThe index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table.ro SrcIndx (S5-TCS-MIB) .1.3.6.1.4.1.45.1.6.7.2.3.1.1 |
s5TrEStatDropEventsTotal number of events in which frames
were dropped by the data source due to
lack of resources.
Note that this number is not necessarily the
number of frames dropped; it is just the number
of times this condition has been detected.roobsolete Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.2 |
s5TrEStatLineErrsTotal number of line errors reported by
all stations in error report frames
and detected on the ring.
Section 3.8.1 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.3 |
s5TrEStatInternalErrsTotal number of adapter internal errors
reported by all stations in error report
frames and detected on the ring.
Section 3.8.2 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.4 |
s5TrEStatBurstErrsTotal number of burst errors reported by
all stations in error report frames
and detected on the ring.
Section 3.8.3 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.5 |
s5TrEStatACErrsTotal number of AC (Address Copied) errors
reported by all stations in error report frames
and detected on the ring.
Section 3.8.4 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.6 |
s5TrEStatAbortErrsTotal number of abort delimiter transmitted
errors reported by all stations in error report
frames and detected on the ring.
Section 3.8.5 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.7 |
s5TrEStatLostFrameErrsTotal number of frames lost errors reported
by all stations in error report frames
and detected on the ring.
Section 3.8.6 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.8 |
s5TrEStatCongestionErrsTotal number of receive congestion errors
reported by all stations in error report
frames and detected on the ring.
Section 3.8.7 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.9 |
s5TrEStatFrameCopiedErrsTotal number of frame copied errors reported
by all stations in error report frames
and detected on the ring.
Section 3.8.8 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.10 |
s5TrEStatFrequencyErrsTotal number of frequency errors reported by
all stations in error report frames
and detected on the ring.
Section 3.8.9 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.11 |
s5TrEStatTokenErrsTotal number of token errors reported by
all stations in error report frames
and detected on the ring.
Section 3.8.10 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.12 |
s5TrEStatSoftErrFrmsTotal number of error report frames detected
on the ring. (Note: this has the same count
as object s5TrBStatGoodErrReportFrms.)ro Counter .1.3.6.1.4.1.45.1.6.7.2.3.1.13 |
s5TrPortEntryA row in Token Ring port table. Entries
can not be created or deleted via SNMP. S5TrPortEntry .s5TrPortTable.1 |
s5TrPortBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .s5TrPortTable.1.1 |
s5TrPortIndxThe index of the port on the board. Its value
ranges between 1 and the number of manageable
ports on the board.ro INTEGER .s5TrPortTable.1.2 |
s5TrPortWrapStatusThe wrap status of the port. The following
values can be written:
wrap(2)........wrap the port
connect(3).....unwrap the port
timedWrap(4)...time wrap port (uses value
from s5TrPortWrapTime)
The following values reflect the wrap
status of the port:
other(1)............wrap status unknown
wrap(2).............port is wrapped
connect(3)..........port is not wrapped
timedWrap(4)........port is timed wrapped
(see value of
s5TrPortWrapTime)
nmmBeaconWrap(5)....beaconing station
automatically removed
by an NMM
wrongSpeedWrap(6)...station with wrong speed
automatically removed
permBeaconWrap(7)...station permanently removed
by an NMM since it attempted
to deinsert and insert in the
ring at a high rate while it
beacons the ring.
On GETs with port status of timeWrap(4), if
the time remaining before the wrap is undone
is available, it will be reported in object
s5TrPortWrapTime as a positive value. If not
available, the value of s5TrPortWrapTime will
be zero. When changing a port to timedWrap(4),
the SET request must also contain the value
for object s5TrPortWrapTime. Only value
wrap(2) will survive resets of the host card.rw Enumeration .s5TrPortTable.1.3 |
s5TrPortWrapTimeThe length of time to keep the port
wrapped when a timed wrap is done to the
board. This object can only be written
in the same request that sets s5TrPortWrapStatus
to timedWrap(4). Afterwards, it indicates
the amount of time left before the timed
wrap is completed, at which time
s5TrPortWrapStatus is changed to connect(3).
This object has the value of zero if the
port is not timed wrapped, and also if the
amount of time is not available.rw TimeIntervalSec (S5-TCS-MIB) .s5TrPortTable.1.4 |
s5TrPortInsrtStatusThe port insertion status. The values are:
other(1).........status unknown
notInserted(2)...port is not inserted
inserted(3)......port inserted into the ringro Enumeration .s5TrPortTable.1.5 |
s5TrPortPhanStatusThe port phantom status. The values are:
other(1).............status unknown
noPhantom(2).........no phantom signal
phantom(3)...........phantom signal is on
softwarePhantom(4)...phantom signal is on by
turning on software
insertion (see
s5TrPortSoftwareInsertion
for more details)
Note: for RI/RO ports, this signal is
driven by the 'lowlight' detector. For
RI/RO ports that have the value of
none(3) for s5TrPortTrnkAccMthd,
this value will always be phantom(3).ro Enumeration .s5TrPortTable.1.6 |
s5TrPortPhanChngsA counter of changes of s5TrPortPhanStatus
from noPhantom(2) to phantom(3).ro Counter .s5TrPortTable.1.7 |
s5TrPortTrnkAccMthdStrapThe strap (hardware jumper) setting for
the RI/RO port trunk validation method.
The values are:
notSupported(1)...a fiber port, or
not a RI/RO port
synoptics(2)......use SynOptics method
none(3)...........no validation done
The operational method used is indicated
by the value of s5TrPortTrnkAccMthd.ro Enumeration .s5TrPortTable.1.8 |
s5TrPortTrnkAccMthdThe operational setting for the
RI/RO port trunk validation method.
The following values can be written:
synoptics(2)...use SynOptics method
none(3)........no validation done
The following values can be read:
notSupported(1)...not a RI/RO port, or
a fiber port
synoptics(2)......use SynOptics method
none(3)...........do no validationrw Enumeration .s5TrPortTable.1.9 |
s5TrPortClassThe port class. The values are:
other(1)......unknown or some other type
ri(2).........Ring In port
ro(3).........Ring Out port
lobe(4).......Lobe port
internal(5)...Internal port which may be
connected to a backplane ringro Enumeration .s5TrPortTable.1.10 |
s5TrPortMediaThe port media type. The values are:
other(1)...........unknown or some other type
synFiber(2)........SynOptics Fiber
stdFiber(3)........Standard Fiber
copperActive(4)....Active copper
copperPassive(5)...Passive copper
mac(6).............Internal MAC
specialProc(7).....Internal special processorro Enumeration .s5TrPortTable.1.11 |
s5TrPortConnectorThe port connector type. The values are:
other(1)......unknown or some other type
internal(2)...no external connector
db9(3)........DB9
rj45(4).......RJ-45
fiberST(5)....fiber STro Enumeration .s5TrPortTable.1.12 |
s5TrPortSoftwareInsertionThis object reflects the capability for a port
to connect to the Ring-In (RI) or Ring-Out (RO)
port of a MAU by software controlled phantom
insertion.
The following values can be read:
notCapableOfSoftwareInsertion(1)...
The port is incapable of
software insertion and
therefore cannot connect
to the RI or RO port
of a MAU
capableAndSoftwareInsertionOn(2)...
The port is capable of
software insertion,
and software insertion
is on
capableAndSoftwareInsertionOff(3)...
The port is capable of
software insertion,
and software insertion
is off
The following values can be written:
capableAndSoftwareInsertionOn(2)...
Turns on the software
insertion (see note)
capableAndSoftwareInsertionOff(3)...
Turns off the software
insertion (see note)
Note: The values capableAndSoftwareInsertionOn(2)
and capableAndSoftwareInsertionOff(3)
are only valid for writing if the port
has the capability of software insertion.rw Enumeration .s5TrPortTable.1.13 |
s5TrPortAFDThis object reflects the capability for a port
to disable AFD, Automatic Frequency Detection.
The following values can be read:
notCapableOfAFDDisable(1)...
The port is incapable of
AFD disable.
capableAndAFDEnabled(2)...
The port is capable of
AFD disable and the
current AFD is enabled.
capableAndAFDDisabled(3)...
The port is capable of
AFD disable and the
current AFD is disabled.
The following values can be written:
capableAndAFDEnabled(2)...
Enable the AFD.
capableAndAFDDisabled(3)...
Disable the AFD.
Note: The values capableAndAFDEnabled(2)
and capableAndAFDDisabled(3)
are only valid for writing if the port
has the capability of AFD disable.rw Enumeration .s5TrPortTable.1.14 |