SYNOPTICS-COMMON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
107
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
s3AgentSw OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.45.1.2.1 |
s3AgentTypeThe 3000 series agent's Module type.ro Enumeration .1.3.6.1.4.1.45.1.2.1.1 |
s3AgentFwVerThe agent's module firmware version
0=Rev A,1=Rev B,etc.ro INTEGER .1.3.6.1.4.1.45.1.2.1.2 |
s3AgentSwMajorVerThe agent major software version number.
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal.ro INTEGER .1.3.6.1.4.1.45.1.2.1.3 |
s3AgentSwMinorVerThe agent minor software version number
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal.ro INTEGER .1.3.6.1.4.1.45.1.2.1.4 |
s3AgentBootProtocolBoot protocol used to load the module with its software.
On Agents with the Local Load option the value return by
this object is valid only if the MIB object
s3LocImageLoadMode is remoteBoot(2) or localAsBackup(4).ro Enumeration .1.3.6.1.4.1.45.1.2.1.5 |
s3AgentBootFileThe name of the boot file that is sent to the file
server during boot time. The actual boot protocol
used to retrieve the file is determined by
s3AgentBootProtocol.
This parameter will not take effect until written
into EEPROM (s3AgentWriteEeprom) and a reset
(s3AgentReset) is issued. This parameter is used
only if the s3AgentBootMode is set to use EEPROM.rw DisplayString .1.3.6.1.4.1.45.1.2.1.6 |
s3AgentAuthTrapEnable or disable the use of authentication error
trap generation.
This parameter will take effect only after a restart
(s3AgentRestart) is issued. This parameter will not
survive a reset (s3AgentReset) unless the specific
NMM configuration file is updated to reflect the
change.
This object is now deprecated. Managers should use
the snmpEnableAuthenTraps object in MIB-II instead.
This object is aliased to snmpEnableAuthenTraps.
Changing either variable will change the other
accordingly.rwdeprecated Enumeration .1.3.6.1.4.1.45.1.2.1.7 |
s3AgentLocationThis is a informational string that could be used
to show the physical location (i.e. area) of the
NMM or concentrator.
This parameter will take effect only after a restart
(s3AgentRestart) is issued. This parameter will not
survive a reset (s3AgentReset) unless the specific
NMM configuration file is updated to reflect the
change.
This object is now deprecated. Managers should use
the sysLocation object in MIB-II instead.rwdeprecated DisplayString .1.3.6.1.4.1.45.1.2.1.8 |
s3AgentMibLevelUsed to determine current MIB release supported
by agent. The encoding of this object is of the
following form: xyy, where x is the major version
number and yy is the minor version number. Thus,
version 3.0 would be represented as 300, version
3.01 would be 301 and 3.1 would be 310. Object is
in decimal. Values that correspond to each agent
type and version are specified in the other
SynOptics documentation.ro INTEGER .1.3.6.1.4.1.45.1.2.1.9 |
s3AgentFeatureLevelUsed to determine feature level of the agent.
The encoding of this object is of the following
form: xyy, where x is the major version
number and yy is the minor version number. Thus,
feature level version 1.0 would be represented as
100, version 1.01 would be 101 and 1.1 would be 110.
Object is in decimal. The current values are the
following:
100 - 331x V3.x
- Basic Agent
100 - 351x
- Basic Agent
100 - 271x V3.x
- Basic Agent
101 - 281x V5.0
- Basic Agent
- Dual Stack
102 - 331x V4.2.0
- Basic Agent
- Non Segmentable Chassis
- Ethernet Common board table
- Ethernet Command port table
- redundant power supply group
103 - 331xA V4.2.0
- Basic Agent
- Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- Ethernet plus statistics,
104 - 331xA V4.2.0
- Basic Agent
- Non-Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- Ethernet plus statistics,
109 - 331x V4.2.0
- Basic Agent
- Segmentable Chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
112 - 281x V5.1.0
- Basic Agent
- Dual Stack
- Network to MAC address mapping
113 - 331x V5.1.0
- Basic Agent
- Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
114 - 331x V5.1.0
- Basic Agent
- Non-Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
115 - 331xA V5.1.0
- Basic Agent
- Segmentable chassis
- Dual Stack
- Full Truffle Support
- Network to MAC address mapping
116 - 331xA V5.1.0
- Basic Agent
- Non-Segmentable chassis
- Dual Stack
- Full Truffle Support
- Network to MAC address mapping
200 - 331x V4.0 & V4.0.1
- Advanced Agent
200 - 271x V4.x
- Advanced Agent
200 - 351x V4.x
- Advanced Agent
200 - all FDDI Agents
201 - 331x V4.1.0, V4.1.1
- Advanced Agent
- redundant power supply group
202 - 331xS V4.1.0, V4.1.1
- Advanced Agent
- redundant power supply group
- DS/SD traffic tables,
- Ethernet plus statistics,
- frame type distribution table
- frame length distribution table
203 - 281x V4.2.0
- Advanced Agent
- Dual Stack
204 - 331x V4.2.0
- Advanced Agent
- Non-Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
205 - 331xS V4.2.0
- Advanced Agent
- Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- DS/SD traffic tables,
- Ethernet plus statistics,
- frame type distribution table
- frame length distribution table
206 - 331xS V4.2.0
- Advanced Agent
- Non-Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- DS/SD traffic tables,
- Ethernet plus statistics,
- frame type distribution table
- frame length distribution table
207 - 331xA V4.2.0
- Advanced agent
- Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- Ethernet plus statistics,
208 - 331xA V4.2.0
- Advanced agent
- Non-Segmentable chassis
- Ethernet Common board table
- Ethernet Common port table
- redundant power supply group
- Ethernet plus statistics,
209 - 331x V4.2.0
- Advanced agent
- Segmentable chassis
- Ethernet Common board table
- Ethernet Command port table
- redundant power supply group
212 - 331x V5.1.0
- Advanced Agent
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
213 - 281x V5.1.0
- Advanced Agent
- Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
214 - 331x V5.1.0
- Advanced Agent
- Non-Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
215 - 331xA V5.1.0
- Advanced Agent
- Segmentable chassis
- RMON Ether Stats, History, Alarm, Event Groups
- Dual Stack
- Full Truffle Support
- Network to MAC address mapping
216 - 331xA V5.1.0
- Advanced Agent
- Non-Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
217 - 331xS V5.1.0
- Advanced Agent
- Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
- Bulk table retrieval for traffic matrix
218 - 331xS V5.1.0
- Advanced Agent
- Non-Segmentable chassis
- Full Truffle Support
- Dual Stack
- Network to MAC address mapping
- RMON Ether Stats, History, Alarm, Event Groups
- Bulk table retrieval for traffic matrixrodeprecated INTEGER .1.3.6.1.4.1.45.1.2.1.10 |
s3AgentMySlotIdSlot where this agent currently resides. If
hardware is unable to determine then a 0 should
be returned.ro INTEGER .1.3.6.1.4.1.45.1.2.1.11 |
s3AgentUnAuthIpThis object contains the IP address of the last
station that tried to access this agent with an
invalid community string. This object is used
as a VarBind in an Authentication Trap PDU. A get
request will return the last value used, and will
return the null address 0.0.0.0 if no
authentication traps have been sent.ro IpAddress .1.3.6.1.4.1.45.1.2.1.12 |
s3AgentUnAuthCommThis object contains the community string of the
last unauthenticated attempt to access this agent.
This object is used as a VarBind in an Authentication
Trap PDU. A get request will return the last value
used, and will return the null string (length 0) if
no authentication traps have been sent.ro OCTET STRING .1.3.6.1.4.1.45.1.2.1.13 |
s3AgentSwLicenseCodeThe software license code assigned to this agent.
This code is required for initializing the agent.
The code consists of exactly eight printable
characters.ro DisplayString .1.3.6.1.4.1.45.1.2.1.14 |
s3AgentPerformanceThis counts the CPU idle time of the agent
in units of 10 microseconds.ro Counter .1.3.6.1.4.1.45.1.2.1.15 |
s3AgentSwMaintVerThe agent software maintenance version number
(version is specified as major.minor.maint or 3.0.1).
Object is in decimal.ro INTEGER .1.3.6.1.4.1.45.1.2.1.16 |
s3AgentConfigLoadModeThis indicates whether the agent should get
configuration data from the network, use the local
configuration data, or try the network first and then
fall back to local configuration if the network load
fails. This object applies only to agents with boot
prom support for agent configuration load options.
This parameter will not take effect until written into
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset)
is issued.rw Enumeration .1.3.6.1.4.1.45.1.2.1.17 |
s3AgentConfigActualSourceThis indicates whether the agent loaded configuration
data from the network or used the local configuration
data.ro Enumeration .1.3.6.1.4.1.45.1.2.1.18 |
s3AgentMgmtProtoModeThis indicates from which network transports over
which the agent will accept SNMP requests. This object
only applies to agents with IP and IPX dual stack support.
This parameter will not take effect until written into
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset)
or a restart (s3AgentRestart) is issued.rw Enumeration .1.3.6.1.4.1.45.1.2.1.19 |
s3AgentActualMgmtProtocolThis indicates which network transports over which
the agent will currently accept SNMP requests.ro Enumeration .1.3.6.1.4.1.45.1.2.1.20 |
s3AgentImageFileThe name of the agent image file that the NMM loads
at boot time.
This parameter will not take effect until written to
EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset)
is issued. This parameter is used only if s3AgentBootMode
is set to use eeprom(1), s3AgentConfigLoadMode is set to
localConfig(3) and s3LocImageLoadMode is not set to
localBoot(3).rw DisplayString .1.3.6.1.4.1.45.1.2.1.21 |
s3AgentNetProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.2 |
s3AgentIpProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.2.1 |
s3AgentIpAddrThe Agent's administrative IP address. The
current operational IP address can be obtained
by the ipAdEntAddr entry in the ipAddrTable.
This parameter will take effect only after a
restart (s3AgentRestart) is issued. This parameter
will not survive a reset (s3AgentReset) unless it
is written into EEPROM (s3AgentWriteEeprom). This
parameter is used only if the s3AgentBootMode is
set to use EEPROM.rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.1 |
s3AgentNetMaskThe Agent's administrative subnet mask. The
current operational subnet mask can be obtained
by the ipAdEntNetMask entry in the ipAddrTable.
This parameter will take effect only after a
restart (s3AgentRestart) is issued. This parameter
will not survive a reset (s3AgentReset) unless it
is written into EEPROM (s3AgentWriteEeprom). This
parameter is used only if the agentBootMode is set
to use EEPROM.
NOTE: The Model 331x (3313, 3313M, 3314-ST,
3314M-ST) Ethernet NMM agents do not store this
parameter in EEPROM, so for these agents the subnet
mask configuration must be downloaded in the
configuration file.rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.2 |
s3AgentDefaultGatewayThe Agent's administrative default gateway IP
address. The current operational default gateway's
IP address can be obtained from the ipRoutingTable.
This parameter will take effect only after a
restart (s3AgentRestart) is issued. This parameter
will not survive a reset (s3AgentReset) unless it
is written into EEPROM (s3AgentWriteEeprom). This
parameter is used only if the agentBootMode is set
to use EEPROM.rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.3 |
s3AgentBootServerAddrThe IP address to which the requests for boot files
are sent. The protocol used to retrieve the boot
files is determined by object s3AgentBootProtocol.
This parameter will not take effect until until
written into EEPROM (s3AgentWriteEeprom) and a
reset (s3AgentReset) is issued. This parameter is
used only if the s3AgentBootMode is set to use EEPROM.rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.4 |
s3AgentSecDefaultGatewayThe agent's administrative secondary default
gateway IP address. This default gateway's IP
address will be used when the primary default
gateway (s3AgentDefaultGateway) is determined
unreachable.
This parameter will not survive a reset (s3AgentReset)
unless it is written into EEPROM (s3AgentWriteEeprom).rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.5 |
s3AgentPingDefaultRtrSwitchControls whether the agent will periodically send
out the icmp echos (pings) to the default router(s).
The values are:
other(1)...unknown or other
on(2)......agent will periodically send out pings
to the default router(s).
off(3).....agent won't send out the pings to the
default router(s).rw Enumeration .1.3.6.1.4.1.45.1.2.2.1.6 |
s3AgentPingDefaultRtrTimeThe time interval that the agent uses to send
out the pings periodically to the default router(s)
to check if the router(s) are still reachable.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.2.2.1.7 |
s3AgentBootRouterThe default route IP address used at boot
time to download the NMM's agent configuration
and image files from the TFTP server.
This parameter will not survive a reset
(s3AgentReset) unless it is written into EEPROM
(s3AgentWriteEeprom).rw IpAddress .1.3.6.1.4.1.45.1.2.2.1.8 |
s3AgentTrapReceiverTableTable containing list of NMS's that are to receive
traps generated by this NMM. SEQUENCE OF S3AgentTrapReceiverEntry .1.3.6.1.4.1.45.1.2.3 |
s3AgentTrapReceiverEntryA destination address and community string to a
particular trap server, along with a trap filter
and entry aging capability. S3AgentTrapReceiverEntry .1.3.6.1.4.1.45.1.2.3.1 |
s3AgentTrapRcvrStatusSetting this object to the value invalid(3) has
the effect of invalidating the corresponding entry
in the s3AgentTrapReceiverTable. That is, it
effectively disassociates the address identified
with the entry by removing the entry from the table.
On a read the value of valid(2) should be returned
if the entry contains a valid record, or invalid(3)
should be returned if the entry contains an invalid
record.rw Enumeration .1.3.6.1.4.1.45.1.2.3.1.1 |
s3AgentTrapRcvrNetAddressIP address for trap server that is to receive
the trap.rw OCTET STRING .1.3.6.1.4.1.45.1.2.3.1.2 |
s3AgentTrapRcvrCommCommunity string used for traps sent to this
trap receiver.rw OCTET STRING .1.3.6.1.4.1.45.1.2.3.1.3 |
s3AgentTrapRcvrAgeTimeThis is the time interval used to age entries out
of the trap receiver table. The default value if
not specified will be 0, or infinite, never to be
aged out.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.2.3.1.4 |
s3AgentHw OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.4 |
s3AgentStatusThis indicates whether the NMM is online(2) and
operating, or offline(1) (ie: not connected to the
concentrator backplane).ro Enumeration .1.3.6.1.4.1.45.1.2.4.1 |
s3AgentMdaHwVerThe network management module's MDA hardware
version number (0=Rev. A, 1=Rev. B, etc.).ro INTEGER .1.3.6.1.4.1.45.1.2.4.2 |
s3AgentModeThis indicates whether the NMM is operating in
primary(1) or secondary(2) mode.rw Enumeration .1.3.6.1.4.1.45.1.2.4.3 |
s3AgentResetNetwork management module reset status. Writing
a reset(2) to this object will reset the NMM and
perform a download and restart.rw Enumeration .1.3.6.1.4.1.45.1.2.4.4 |
s3AgentRestartNetwork management module restart status.
Writing a restart(2) to this object will restart
the NMM. This initializes all the counters,
re-reads the EEPROM data structure and starts
executing from the beginning of the code.rw Enumeration .1.3.6.1.4.1.45.1.2.4.5 |
s3AgentBootModeThe method for obtaining boot parameter information.
The possible values are:
eeprom(1)......get boot info from eeprom
net(2).........get boot info from remote server
otherCase(3)...not eeprom or net
This parameter will not take effect until written
into EEPROM (s3AgentWriteEeprom) and a reset
(s3AgentReset) is issued.
Note: In previous versions of this MIB the name
associated with the value '2' was 'other',
which implied the same meaning as it does
now. Thus to prevent confusion, the name
for value '3' was chosen to be 'otherCase'.rw Enumeration .1.3.6.1.4.1.45.1.2.4.6 |
s3AgentWriteEepromNetwork management module EEPROM write status.
Writing a (2) to this object will write the contents
of current EEPROM data structure in the EEPROM.rw Enumeration .1.3.6.1.4.1.45.1.2.4.7 |
s3AgentBaudRateSpecifies the baud rate in bits per second of
either the internal modem or the RS-232 port.
This parameter will take effect only after a
restart (s3AgentRestart) is issued. This parameter
will not survive a reset (s3AgentReset) unless
the specific NMM configuration file is updated
to reflect the change.rw Gauge .1.3.6.1.4.1.45.1.2.4.8 |
s3AgentInitStringThis is the initialization string used to establish
the out-of-band connection. (i.e. could contain the
string ATDT,415-960-1100 for an internal or external
modem). This is used as a hint for the network manager
since this string is not used by the agent to initiate
a connection to a management station.
This parameter will take effect only after a restart
(s3AgentRestart) is issued. This parameter will not
survive a reset (s3AgentReset) unless the specific
NMM configuration file is updated to reflect
the change.rw DisplayString .1.3.6.1.4.1.45.1.2.4.9 |
s3AgentEepromSizeThe size of the EEPROM of the agent in units of bytes.ro INTEGER .1.3.6.1.4.1.45.1.2.4.10 |
s3AgentEpromSizeThe size of the EPROM of the agent in units of bytes.ro INTEGER .1.3.6.1.4.1.45.1.2.4.11 |
s3AgentDramSizeThe size of the DRAM of the agent in units of bytes.ro INTEGER .1.3.6.1.4.1.45.1.2.4.12 |
s3AgentHexDisplayThe current 4 ASCII character display of the agent.
Agents with no hex display hardware should return a
zero length string.ro DisplayString .1.3.6.1.4.1.45.1.2.4.13 |
s3AgentFlashStatusThis indicates the operational status of the flash
device of the agent. A fail(3) indicates that either
the flash device configuration on board is not valid
or the flash EEPROMs on the board have failed.ro Enumeration .1.3.6.1.4.1.45.1.2.4.14 |
s3AgentSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.5 |
s3AgentLocImage OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.2.6 |
s3LocImageValidThis indicates whether the agent has a valid local
code image on board. An EPROM checksum failure would
cause the agent to return localImageInvalid(3).ro Enumeration .1.3.6.1.4.1.45.1.2.6.1 |
s3LocImageMajorVersionThe major software version number of the
locally-stored image. This object applies only to
agents with valid local image. Other agents
should return zero.ro INTEGER .1.3.6.1.4.1.45.1.2.6.2 |
s3LocImageMinorVersionThe minor software version number of the
locally-stored image. This object applies only
to agents with valid local image. Other agents
should return zero.ro INTEGER .1.3.6.1.4.1.45.1.2.6.3 |
s3LocImageLoadModeThis indicates whether the agent should get code
from the network, use a local image, or try the
network first and then fall back to local image if
the network boot fails. The localBoot(3) and
localAsBackup(4) values apply only to agents with
local load option. Note: on agents that have
no local storage, either remoteBoot(2), or
remoteNoUpdate(5) may be specified, however
the value remoteBoot(2) is prefered due to
backwards compatibilityrw Enumeration .1.3.6.1.4.1.45.1.2.6.4 |
s3LocImageActualSourceThis indicates whether the agent loaded code from
the network or used a local image. When the the
ImageLoadMode is localAsBackup, this variable
indicates whether the network load was successful.ro Enumeration .1.3.6.1.4.1.45.1.2.6.5 |
s3LocImageMaintVersionThe maintenance software version number of the
locally-stored image. This object applies only
to agents with valid local image. Other agents
should return zero.ro INTEGER .1.3.6.1.4.1.45.1.2.6.6 |
s3000Chassis OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.1 |
s3ChassisTypeThe chassis type.ro SnpxChassisType .1.3.6.1.4.1.45.1.3.1.1 |
s3ChassisBkplTypeThe chassis backplane type.ro SnpxBackplaneType .1.3.6.1.4.1.45.1.3.1.2 |
s3ChassisBkplRevThe chassis backplane revision.ro INTEGER .1.3.6.1.4.1.45.1.3.1.3 |
s3ChassisPsTypeThe chassis power supply type. This value is
valid only when the backplane type is not
other(1). If the chassis has a redundant backplane,
the agent returns redundantCapable(5), even if only
one power supply is installed. The objects
s3RedPsPrimaryConfig and s3RedPsSecondaryConfig
should be consulted to determine the installed
power supply type(s) with redundant backplanes.ro S3PsType .1.3.6.1.4.1.45.1.3.1.4 |
s3ChassisPsStatusThe chassis power supply status.ro Enumeration .1.3.6.1.4.1.45.1.3.1.5 |
s3ChassisFanStatusThe status of the chassis cooling fan.ro Enumeration .1.3.6.1.4.1.45.1.3.1.6 |
s3SlotConfigTableThe chassis slot configuration table. SEQUENCE OF S3SlotConfigEntry .1.3.6.1.4.1.45.1.3.1.7 |
s3SlotConfigEntryWhat type of module is in each slot of the chassis. S3SlotConfigEntry .1.3.6.1.4.1.45.1.3.1.7.1 |
s3SlotNumberThe 3000 Chassis slot number. Valid entries are 1-12.ro INTEGER .1.3.6.1.4.1.45.1.3.1.7.1.1 |
s3SlotModuleIdID for the module. Values are specified in
SynOptics technical documents.ro INTEGER .1.3.6.1.4.1.45.1.3.1.7.1.2 |
s3SlotModuleTypeThe type of module this entry represents.
Values are specified in SynOptics technical documents.rodeprecated S3ModuleType .1.3.6.1.4.1.45.1.3.1.7.1.3 |
s3SlotModuleDescrModule description. Values are specified in
SynOptics technical documents.ro DisplayString .1.3.6.1.4.1.45.1.3.1.7.1.4 |
s3SlotModuleLedStatus of the module LEDs. Format is specified in
SynOptics technical documents. NOTE: the 291x FDDI
workgroup concentrators actually return a string
with size of 10.ro OCTET STRING .1.3.6.1.4.1.45.1.3.1.7.1.5 |
s3SlotModuleMdaIdID of the medium-dependent part of the board.
The value is board dependent. Values are specified
in SynOptics technical documents.ro INTEGER .1.3.6.1.4.1.45.1.3.1.7.1.6 |
s3CommonBoardTableA table containing information about the boards
currently plugged into the 3000 Chassis. This
board table contains an entry for each non-empty
slot in the s3SlotConfigTable, EXCEPT for those
slots containing Retiming Modules.
All of the information in this board table is
retrievable using the NMI commands that are common
to all boards integrated into the SynOptics
Series 3000 Concentrators. SEQUENCE OF S3CommonBoardEntry .1.3.6.1.4.1.45.1.3.1.8 |
s3CommonBoardEntryA table entry containing information about a
single Board currently plugged into the 3000
Chassis. These values can be retrieved using the
common board NMI commands. S3CommonBoardEntry .1.3.6.1.4.1.45.1.3.1.8.1 |
s3CommonBoardIndexA unique value for each board. Its value ranges
between 1 and 12. The value for each board must
remain constant at least from one re-initialization
of the entity's network management system to the
next re-initialization.ro INTEGER .1.3.6.1.4.1.45.1.3.1.8.1.1 |
s3CommonBoardIdThis is the ID of the board, which is 'hard-coded' in the
board, and identifies the board's basic functionality.
Some boards have the capability to change aspects of
their functionality, such as media type, interface types,
or power supply wattages, by plugging in different daughter
cards. Other boards may identify the type of cable plugged
into them. The boards that have these capabilities use
different values for the object s3SlotModuleMda to identify
the changable portion of the functionality currently used.
Boards that do not support these capabilities typically set
the object s3SlotModuleMda to 255 or zero. The combination
of the value of this object and the s3SlotModuleMda object
are then mapped by software to determine the type of
module (i.e., s3SlotModuleType).
Notes: 1.) The object s3SlotModuleType is marked
as deprecated.
2.) Agents do not implement a complete mapping of
s3CommonBoardId and s3SlotModuleMda to
s3SlotModuleType. The mapping that is performed
pertains to the media type of the agent.
The possible values for this object are:
m331x(1)...................331x Ethernet NMM
m3302(2)...................3302 Ethernet STP Host
m332x(3)...................332x Ethernet Local Bridge
m3304ST(4).................3304 Ethernet FOIRL-ST Host
m3305(5)...................3305 Ethernet UTP Host
m333x(6)...................333x Ethernet Repeater/Retiming
m3307(7)...................3307 Ethernet 50 Pin UTP Host
m3308(8)...................3308 10BaseT UTP Host
m3301(9)...................3301 10Base2 Thin Net Host
m3904(10)..................3904 FDDI Multimode Fiber Host
m3902(11)..................3902 FDDI STP Host
m3910S(12).................3910S FDDI NMM
m331xS(14).................331xS Ethernet NMM
m3100R(15).................3100R Power Supply Summing
m3502(16)..................3502 Token Ring Passive STP Host
m3502A(17).................3502A Token Ring Passive STP/UTP Host
m353x(18)..................353x Token Ring RI/RO Repeater
m3040(19)..................3040 Network Control Engine (NCE)
m3505(20)..................3505 Token Ring Active UTP Host
m3505A(21).................3505A Token Ring Active UTP Host
m355x(22)..................355x Token Ring FOIRL RI/RO Repeater
m3040S(23).................3040S Network Control Engine
m351x(24)..................351x Token Ring NMM
m332xS(25).................332xS Ethernet High Speed Local Bridge
m338x(26)..................338x Ethernet Remote Router
m3328(27)..................3328 Ethernet Switching Engine (ESE)
m3395(28)..................3395 Terminal Server
m3394(29)..................3394 LattisTalk Router/Repeater
m3522(30)..................3522 Token Ring Local Bridge
m3395A(31).................3395A Terminal Server
m3800(32)..................3800 Multimedia Router
m3368(36)..................3368 Ethernet LattisSecure Host
m3308A(38).................3308A 10BaseT Host
m2810nmm(39)...............2810 Ethernet NMM
m2810hm(40)................2810 Ethernet Host
m3301ohms75(41)............3301-75 Ethernet Thin Net Host (75-ohm)
m3301ohms93(42)............3301-93 Ethernet Thin Net Host (93-ohm)
m2912(43)..................2912 FDDI STP Concentrator
m2914(44)..................2914 FDDI Fiber Concentrator
m3502B(45).................3502B Token Ring Passive STP/UTP Host
m3505B(46).................3505B Token Ring Active STP/UTP Host
m3307HD(47)................3307HD Ethernet 100 Pin UTP Host
m2702Fhm(48)...............2702F Token Ring Passive Host
m2712Fhm(49)...............2712F Token Ring Passive Host
m2712hm(50)................2712 Token Ring Passive Host
m2702hm(51)................2702 Token Ring Passive Host
m2813nmm(52)...............2813 Ethernet NMM
m2813hm(53)................2813 Ethernet Host
m2814hm(54)................2814 Ethernet Host
m2803hm(55)................2803 Ethernet Host
m3356(56)..................3356 Ethernet Remote Bridge
m2814nmm(57)...............2814 Ethernet NMM
m2804hm(58)................2804 Ethernet Host
m2702Chm(59)...............2702C Token Ring Passive Host
m2715Fhm(60)...............2715F Token Ring Active Host
m2705Fhm(61)...............2705F Token Ring Active Host
m2705Chm(62)...............2705C Token Ring Active Host
m3902A(63).................3902A FDDI STP Host
m2912A(64).................2912A FDDI STP Concentrator
m271xnmm(65)...............271x Token Ring NMM
m2715hm(66)................2715 Token Ring Active Host
m3910SSD(67)...............3910S-SD FDDI NMM
m3313A(68).................3313A Ethernet NMM
m3314A(69).................3314A Ethernet NMM
m3304A(70).................3304A Ethernet 10BaseF Host
m3910SA(71)................3910SA FDDI NMM
m2705hm(72)................2705 Token Ring Active Host
m3905(73)..................3905 FDDI UTP Host
m2915(74)..................2915 FDDI UTP Concentrator
m2715Bhm(75)...............2715B Token Ring Active Host
m2705Bhm(76)...............2505B Token Ring Active Host
m2715BFhm(77)..............2715B-F Token Ring Active Host
m2712Bhm(78)...............2712B Token Ring Passive Host
m2712BFhm(79)..............2712B-F Token Ring Passive Host
m2702BChm(80)..............2702B-C Token Ring Passive Host
m3486(82)..................3486 LattisEngine/486
m810m(88)..................810M Ethernet Concentrator
m3517SA(101)...............3517SA Token Ring NMM
m3308B(102)................3308B 10BaseT Host
m2813SAnmm(103)............2813SA Ethernet NMM
m2814SAnmm(104)............2814SA Ethernet NMM
m3313SA(105)...............3313SA Ethernet NMM
m3314SA(106)...............3314SA Ethernet NMM
m3174(107).................3174 Workstation Controller
m3522A(108)................3522A Token Ring Local Bridge
m3513SA(109)...............3513SA Token Ring NMM
m271xSAnmm(110)............271xSA Token Ring NMM
m2300x(114)................2300x Product
m2310x(115)................2310x Product
m3299C(116)................3299-C Terminal Multiplexor Adapter
m3299U(117)................3299-U TTP Terminal Multiplexor Adapter
m3299F(119)................3299-F Fiber Optic Terminal Adapter
m3410(120).................3410 Fast Ethernet Network
Management Module
m3405(121).................3405 Fast Ethernet Host Module with
12 100BASE-TX ports
m3475(122).................3475 Fast Ethernet Host Module with
11 100BASE-TX ports and 1 100BASE-FX port
mAlcatelEthConcnmm(250)....Alcatel Ethernet NMM
mAlcatelEthConchm(251).....Alcatel Ethernet Host
mAlcatelEthExpConchm(252)..Alcatel Ethernet Expansion Hostro Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.2 |
s3CommonBoardHwVerThe hardware revision of the board.
0=Rev. A, 1=Rev. B, etc.ro INTEGER .1.3.6.1.4.1.45.1.3.1.8.1.3 |
s3CommonBoardStatusThis indicates the operational status of the board.ro Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.4 |
s3CommonBoardResetThis indicates the reset state of the board.
Writing with the value reset (2) will reset
the board.rw Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.5 |
s3CommonBoardPartStatusTells whether the board is partitioned or enabled.
Writing with the value partition(2) will partition
the board indefinitely and writing with the value
enabled(1) will enable the board.
If a timed partition is desired, then this object
must be written with timedPartition(3) and in the
same PDU a partition duration must be supplied in
s3CommonBoardPartTime. Timed partitions will not
survive across a reset. In this case the port will
go to the partition(2) state.
Boards cannot be partitioned in the 2810 concentrator
and other workgroup concentrators. These agents will
implement this object as read-only.rw Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.6 |
s3CommonBoardNmCntlStatusTells whether the board is under network management
control. The value nmControl(2) indicates that the
board or one or more ports are being controlled by
network management. This means that the board
or one or more ports are partitioned via a network
manager.ro Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.7 |
s3CommonBoardPsStatusThis indicates the operational status of the board
power supply. A fail(2) indicates that one of the
power supplies on the board has failed.ro Enumeration .1.3.6.1.4.1.45.1.3.1.8.1.8 |
s3CommonBoardPartTimeWhen partitioning the board for a specified time,
s3CommonBoardPartStatus must be set with
timedPartition(3) and this object must be supplied
with the duration value. If a PDU sets
s3CommonBoardPartStatus and not this object, the
board will not be partitioned. This value is
decremented while the board is partitioned
until the value reaches zero at which time the
board is enabled.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.1.8.1.9 |
s3SlotConfigOctetStringPacked octet string for the slot configuration table.
Format is specified in SynOptics technical documents.
NOTE: the 291x FDDI workgroup concentrators actually
return a string with size a multiple of 14.ro OCTET STRING .1.3.6.1.4.1.45.1.3.1.9 |
s3000RedundantPs OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.1.10 |
s3RedPsPlus5vCurrentThis gauge is measured in amperes.ro Gauge .1.3.6.1.4.1.45.1.3.1.10.1 |
s3RedPsPlus12vCurrentThis gauge is measured in amperes.ro Gauge .1.3.6.1.4.1.45.1.3.1.10.2 |
s3RedPsAmbientTempStatusThis status indicates whether the ambient
temperature is normal, i.e., below 40 degree C.ro Enumeration .1.3.6.1.4.1.45.1.3.1.10.3 |
s3RedPsAmbientTemperatureThis gauge is measured in Celsius.ro Gauge .1.3.6.1.4.1.45.1.3.1.10.4 |
s3RedPsPrimaryConfigThis indicates the primary power supply type
(PS 1). Note that value redundantCapable(5)
should not be returned for this object.ro S3PsType .1.3.6.1.4.1.45.1.3.1.10.5 |
s3RedPsSecondaryConfigThis indicates the secondary power supply type
(PS 2). Note that value redundantCapable(5)
should not be returned for this object.ro S3PsType .1.3.6.1.4.1.45.1.3.1.10.6 |
s3RedPsDiodeStatusThis gives the status of the summing diode on the
3100R associated with the indicated power supply.ro Enumeration .1.3.6.1.4.1.45.1.3.1.10.7 |
s3RedPsPowerAlarmThis tells whether the indicated power supply is
sensing voltage on the backplane.ro Enumeration .1.3.6.1.4.1.45.1.3.1.10.8 |
s3ChassisBkPlEthChanDivA value that describes the divisions of the
segmentable ethernet channel. For those devices
that do not implement a backplane with this feature,
they still need to implement this object and return
a value (i.e., zero) to indicate that no divisions
are enabled.
The value is a sum (i.e., integer bit string).
This value initially takes the value of zero,
then for each division that is enabled on the channel,
2 raised to a power is added to the sum. The powers
are according to the following table:
Division between Power
Slots 4 and 5 0
Slots 6 and 7 1
Slots 8 and 9 2
For example, a channel with no divisions enabled
(i.e., not segmented) would have a value of 0.
A channel with divisions between slots 6 and 7,
and slots 8 and 9 enabled (i.e., having three
segments) would have a value of 6 (2**1 + 2**2).ro INTEGER .1.3.6.1.4.1.45.1.3.1.11 |
s3ChassisEnetChannelATypeThe agent will return aSegmentable(2) for the 3000N,
3000NT, 3000S, 3000SR, and any other backplanes in
which Ethernet channel A can be divided into multiple
segments. The value aNotSegmentable(3) indicates
that the Ethernet backplane channel A cannot be
segmented.
For Token Ring or FDDI workgroup concentrators, or
other devices in which there is no Ethernet channel,
the agent will return other(1).ro Enumeration .1.3.6.1.4.1.45.1.3.1.12 |
s3000Ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.2 |
s3000TokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3 |
s3000FDDI OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.4 |
s3000Bridge OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.5 |
s3000TerminalServer OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.6 |
s3000LattisTalk OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.7 |
s3000Trb OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.8 |