REPEATER-REV4-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for REPEATER-REV4-MIB.
322
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
322 total| Object Name |
|---|
repeaterrev4 OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4 |
CTRON-MIB-NAMES Unknown .1.3.6.1.4.1.52.4.1.1.1.4 |
rptr OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1 |
rptrMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.1 |
rptrMgmtNameThe ASCII name assigned to this network.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 |
rptrMgmtPortCountTotal number of ports residing on this lan segment.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 |
rptrMgmtPortsEnableSetting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 |
rptrMgmtPortsOnGet the total number of ON ports in this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 |
rptrMgmtPortsOperGet the number of operational ports in this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 |
rptrMgmtBoardMapGet a map of the chassis slots occupied by the boards in
this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 |
rptrMgmtInterfaceNumGet the MIBII interface number of this network. A return of zero will
mean this network is not associated with a MIBII interface.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 |
rptrMgmtResetCountersSetting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols'
and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID
will always return a 1.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.1.8 |
rptrStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2 |
rptrPktStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1 |
rptrPktStatsPacketsGet this repeater's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 |
rptrPktStatsBytesGet this repeater's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 |
rptrPktStatsCollsGet this repeater's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 |
rptrPktStatsErrorsGet this repeater's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 |
rptrPktStatsAlignGet this repeater's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 |
rptrPktStatsCRCGet this repeater's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 |
rptrPktStatsOOWGet this repeater's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 |
rptrPktStatsNoRscThis counter is the number of packets on this network that the
hardware has processed that the management has either not seen yet,
in the case of an active network, or has missed missed all
together, in the case of a once active network.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 |
rptrPktStatsBroadcastsThis counter is the number of broadcast packets on this network
that the hardware has processed.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9 |
rptrPktStatsMulticastsThis counter is the number of multicast packets on this network
that the hardware has processed.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10 |
rptrProtocols OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2 |
rptrProtocolsOSIGet this repeater's total received OSI packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 |
rptrProtocolsNovellGet this repeater's total received Novell packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 |
rptrProtocolsBanyanGet this repeater's total received Banyan packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 |
rptrProtocolsDECNetGet this repeater's total received DECNet packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 |
rptrProtocolsXNSGet this repeater's total received XNS packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 |
rptrProtocolsIPGet this repeater's total received TCP/IP packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 |
rptrProtocolsCtronGet this repeater's total received CTRON Management packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 |
rptrProtocolsAppletalkGet this repeater's total received Appletalk packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 |
rptrProtocolsOtherGet this repeater's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 |
rptrFrameSizes OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3 |
rptrFrameSzRuntGet this repeater's total received packets of size less than
64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 |
rptrFrameSz64To127Get this repeater's total received packets of size between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 |
rptrFrameSz128To255Get this repeater's total received packets of size between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 |
rptrFrameSz256To511Get this repeater's total received packets of size between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 |
rptrFrameSz512To1023Get this repeater's total received packets of size between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 |
rptrFrameSz1024To1518Get this repeater's total received packets of size between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 |
rptrFrameSzGiantGet this repeater's total received packets of size greater
than 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 |
rptrAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.3 |
rptrAlarmsTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 |
rptrAlarmsTrafThresholdThe maximum number of packets that will be allowed before
an alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 |
rptrAlarmsCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 |
rptrAlarmsCollThresholdThe collision threshold is the maximum number of collisions
within the time base that will be allowed before an alarm
is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 |
rptrAlarmsErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 |
rptrAlarmsErrThresholdThe percentage of errors per good packet within
the timebase that will cause an alarm. The units of this value
is in seconds.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 |
rptrAlarmsErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 |
rptrAlarmsAlarmTimebaseThe alarm timebase, in seconds.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 |
rptrAlarmsBroadEnableGet returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.9 |
rptrAlarmsBroadThresholdThe broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.10 |
rptrRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.4 |
rptrRedund OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1 |
rptrRedundResetIf this object is set to Reset it will cause a reset
of the redundancy object to occur. Setting this
object to NoReset will do nothing. This object will always
be read as NoReset.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 |
rptrRedundPollIntervalGet/Set the number of seconds between polls for redundancy.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 |
rptrRedundTestTODGet/Set the time of day at which the redundant circuits will
be tested. The format of the time string is hh:mm:ss.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 |
rptrRedundPerformTestIf this object is set to Test it will cause a test of the
redundant circuits to be performed. Setting this object to
NoTest will have no effect. When read this object will always
return NoTest.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 |
rptrRedundMaxCrctsReturns the maximum number of circuits which may exist on this
network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 |
rptrRedundCrctTableA list of redundant circuit objects for this repeater. SEQUENCE OF RptrRedundCrctEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 |
rptrRedundCrctEntryA list of objects for a particular redundant circuit. RptrRedundCrctEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 |
rptrRedundCrctIdReturns the index for a member circuit in the table of
redundant circuits.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 |
rptrRedundCrctNameGet/Set the name of the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 |
rptrRedundCrctRetrysGet/Set the the number of unanswered polls allowed for
the circuit.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 |
rptrRedundCrctNumBPsGet the number of board/port combinations associated with
the circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 |
rptrRedundCrctNumAddrGet the number of IP Addresses associated with the circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 |
rptrRedundCrctAddAddrAdd an IP Address to the polling list for the indicated circuit.rw NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 |
rptrRedundCrctDelAddrDelete an IP Address from the polling list of the indicated
circuit.rw NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 |
rptrRedundCrctEnableIf this object is set to Enable, the circuit is enabled. If
this object is set to Disable, the circuit is disbabled. When
read, this object returns the state of the object based on the
last request made.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 |
rptrRedundCrctResetIf this object is set to Reset, the circuit is reset. All
of the circuit's associated boards and ports are returned to
NOT_USED, any associated IP Addresses are purged from the
circuit's address list, the name is cleared, and the retry
count is reset to a default value. Setting this object to
NoReset has no effect. When read, NoReset is always returned.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 |
rptrRedundPortTableA list of redundant port objects for this repeater. SEQUENCE OF RptrRedundPortEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 |
rptrRedundPortEntryA redundant port entry containing objects pertaining to
a particular redundant port. RptrRedundPortEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 |
rptrRedundPortIdA unique value identifying an element in a sequence of member
ports which belong to a circuit in the table of redundant
circuits. This value is not a port number; rather it is a value
which goes from 1 to the maximum number of ports which may be
included in a redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 |
rptrRedundPortCrctIdA unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 |
rptrRedundPortNumReturns the port number of a member port belonging to a redundant
circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 |
rptrRedundPortBoardNumReturns the board number of a member port belonging to a
redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 |
rptrRedundPortTypeReturn the state of a port associated with the indicated circuit.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 |
rptrRedundAddrTableA list of redundant IP Address objects which belong to a circuit
for this repeater. SEQUENCE OF RptrRedundAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 |
rptrRedundAddrEntryA entry containing objects pertaining to a particular redundant
IP Address which belongs to a circuit. RptrRedundAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 |
rptrRedundAddrIdA unique value identifying an element in a sequence of member
IP Addresses which belong to a circuit in the table of redundant
circuits. This value goes from 1 to the maximum number of IP
Addresses which may be included in a redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 |
rptrRedundAddrCrctIdA unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 |
rptrRedundAddrIPAddrReturns an IP Address associated with the indicated circuit.ro NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 |
rptrSourceAddress OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.5 |
rptrSrcAddrListTableThis table defines the source address list that is defined at
the repeater level. SEQUENCE OF RptrSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 |
rptrSrcAddrListEntryDefines a specific source address object. RptrSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 |
rptrSrcAddrListIdReturns an index into a table of source address seen by this
repeater.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 |
rptrSrcAddrAddressListReturns a source address seen by this repeater.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 |
rptrSrcAddrSrcTableThis table defines the list of all source addresses that have been
seen. SEQUENCE OF RptrSrcAddrSrcTableEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 |
rptrSrcAddrSrcTableEntryDescribes a particular source address source entry. RptrSrcAddrSrcTableEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 |
rptrSrcAddrSrcTableEntryIdReturns the source address to which this table's information
pertains.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 |
rptrSrcAddrSrcTableEntryPortReturns the port# of the port that sourced the source address.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 |
rptrSrcAddrSrcTableEntryPortGroupReturns the port group# of the port that sourced the source address.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 |
rptrSrcAddrMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3 |
rptrSrcAddrMgmtSrcAgeIntervalGet/Set source addressing ageing interval.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 |
rptrSrcAddrMgmtPortLockSetting this object to Lock will activate the network port
security lock.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 |
rptrSrcAddrMgmtActiveUsersGet the number of active users on this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 |
rptrSrcAddrMgmtHashTypeDefines the type of hashing that will be used for source address
management. In a DEC-NET environment or a combination fo DEC-NET
and non DEC-NET users where source address hash access is a concern
a value of decHash(2) may yield better results. For non DEC-NET
users a value of noDecHash(1) is preferred.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4 |
rptrTrap OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.6 |
rptrHwTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.6.1 |
rptrHwTrapSetLinkEnables and disables link traps for this network. Setting a value
of disable(1) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetLink for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetLink for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetLink for this network are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1 |
rptrHwTrapSetSegEnables and disables segmentation traps for this network. Setting a
value of disable(1) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetSeg for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetSeg for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetSeg for this network are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 |
rptrSaTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.6.2 |
rptrSaTrapSetSrcaddrEnables and disables source address traps for this network. Setting
a value of disable(1) is equivalent to setting all instances of
rptrPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of
enable(2) is equivalent to setting all instances of
rptrPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortSaTrapSetSrcaddr for this network are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortSaTrapSetSrcaddr for this network are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortSaTrapSetSrcaddr for this network are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1 |
rptrSaSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.7 |
rptrSecurityLockStateSetting this object to Lock will activate the network port
security lock.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.7.1 |
rptrSecuritySecureStateThe status of source address security of the network. Ports on
the network that are secure(1), can be locked in order to
enable security. nonSecure(2) ports cannot be locked.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.7.2 |
rptrSecurityLearnStateThe learn state of the network. This object will only
be applied to ports that are unlocked. If set to learn(1), all
addresses are deleted on the ports and learning begins once again.
If it is set to noLearn(2), learning stops on the port.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 |
rptrSecurityLearnModeGet/Set the learn mode of the network. If set to onetime learn mode
oneTime(1), each port is capable of learning two addresses and
securing on both destination and source addresses once they are
locked. If set to continuous learn continuous(2), all addresses are
initially deleted and each port continuously replaces the existing
secure source address with the latest source address it sees.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 |
rptrPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2 |
rptrPortGrpMgmtTableA list of port management objects for this repeater node. SEQUENCE OF RptrPortGrpMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.1 |
rptrPortGrpMgmtEntryAn entry containing objects pertaining to port management
for a port group. RptrPortGrpMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 |
rptrPortGrpMgmtGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 |
rptrPortGrpMgmtNameGets/Sets a name for the specified port group.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 |
rptrPortGrpMgmtPortCountGet total number of ports contained on the board.
Notice that this is the physical port count.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 |
rptrPortGrpMgmtPortsEnableSetting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 |
rptrPortGrpMgmtPortsOnGet total number of ON ports in this port group.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 |
rptrPortGrpMgmtPortsOperGet total number of operational ports in the port group.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 |
rptrPortGrpMgmtLogPortCountGet total number of ports contained in this port group.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7 |
rptrPortGrpStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2.2 |
rptrPortGrpPktStatsTblThis table provides packet statistics for port group. SEQUENCE OF RptrPortGrpPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 |
rptrPortGrpPktStatsEntryDefines a specific packet statistics entry. RptrPortGrpPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 |
rptrPortGrpPktStatsIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 |
rptrPortGrpPktStatsPktsReturn this port group's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 |
rptrPortGrpPktStatsBytesReturn this port group's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 |
rptrPortGrpPktStatsCollsReturn this port group's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 |
rptrPortGrpPktStatsErrorsReturn this port group's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 |
rptrPortGrpPktStatsAlignReturn this port group's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 |
rptrPortGrpPktStatsCRCReturn this port group's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 |
rptrPortGrpPktStatsOOWReturn this port group's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 |
rptrPortGrpPktStatsBroadcastsReturn this port group's total received broadcast packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9 |
rptrPortGrpPktStatsMulticastsReturn this port group's total received multicast packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10 |
rptrPortGrpProtocolTblProvides port group protocol statistics. SEQUENCE OF RptrPortGrpProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 |
rptrPortGrpProtocolEntryDefines a specific port group protocol statistics entry. RptrPortGrpProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 |
rptrPortGrpProtocolIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 |
rptrPortGrpProtocolOSIReturn this port group's total received OSI packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 |
rptrPortGrpProtocolNovellReturn this port group's total received Novell packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 |
rptrPortGrpProtocolBanyanReturn this port group's total received Banyan packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 |
rptrPortGrpProtocolDECNetReturn this port group's total received DECNet packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 |
rptrPortGrpProtocolXNSReturn this port group's total received XNS packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 |
rptrPortGrpProtocolIPReturn this port group's total received TCP/IP packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 |
rptrPortGrpProtocolCtronReturn this port group's total received CTRON Management packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 |
rptrPortGrpProtocolAppletalkReturn this port group's total received Appletalk packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 |
rptrPortGrpProtocolOtherReturn this port group's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 |
rptrPortGrpFrameSzTblDefines frame sizes as seen by this port group. SEQUENCE OF RptrPortGrpFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 |
rptrPortGrpFrameSzEntryDefines a particular frame size entry. RptrPortGrpFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 |
rptrPortGrpFrameSzIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 |
rptrPortGrpFrameSzRuntReturn this port group's total received packets of size less
than 64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 |
rptrPortGrpFrameSz64To127Return this port group's total received packets of size between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 |
rptrPortGrpFrameSz128To255Return this port group's total received packets of size between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 |
rptrPortGrpFrameSz256To511Return this port group's total received packets of size between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 |
rptrPortGrpFrameSz512To1023Return this port group's total received packets of size between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 |
rptrPortGrpFrameSz1024To1518Return this port group's total received packets of size between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 |
rptrPortGrpFrameSzGiantReturn this port group's total received packets of size greater
than 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 |
rptrPortGrpAlarmTableA list of port group alarm objects for this repeater node. SEQUENCE OF RptrPortGrpAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.3 |
rptrPortGrpAlarmEntryAn entry containing objects pertaining to port group alarms
for a port group. RptrPortGrpAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 |
rptrPortGrpAlarmIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 |
rptrPortGrpAlarmTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 |
rptrPortGrpAlarmTrafThresholdThe maximum number of packets that will be allowed before
an alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 |
rptrPortGrpAlarmTrafGrpDisableSet will permit a port group to be disabled on a traffic alarm
condition. Get will show whether the port group disabling is
allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 |
rptrPortGrpAlarmCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 |
rptrPortGrpAlarmCollThresholdThe collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 |
rptrPortGrpAlarmCollBdDisableSet will permit a port group to be disabled on a collision alarm
condition. Get will show whether the port group disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 |
rptrPortGrpAlarmErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 |
rptrPortGrpAlarmErrThresholdGet/Set the percentage of errors per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 |
rptrPortGrpAlarmErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 |
rptrPortGrpAlarmErrGrpDisableSet will permit a port group to be disabled on an error alarm
condition. Get will show whether the port group disabling is
allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 |
rptrPortGrpAlarmBroadEnableGet returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12 |
rptrPortGrpAlarmBroadThresholdThe broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13 |
rptrPortGrpAlarmBroadGrpDisableSet will permit a port group to be disabled on a broadcast alarm
condition. Get will show whether the port group disabling is
allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14 |
rptrPortGrpSrcAddrTableThis table provides a list of the number of active users that
have been seen by port group. SEQUENCE OF RptrPortGrpSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.4 |
rptrPortGrpSrcAddrEntryDefines a specific active user entry. RptrPortGrpSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 |
rptrPortGrpSrcAddrIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 |
rptrPortGrpSrcAddrActiveUsersReturns the total number of active users seen by this port group.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 |
rptrPortGrpTrap OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2.5 |
rptrPortGrpHwTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1 |
rptrPortGrpHwTrapTableA list of trap enable/disable at the port group level. Disable
here is equivalent to disable for each port in the port group. SEQUENCE OF RptrPortGrpHwTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1 |
rptrPortGrpHwTrapEntryIndividual trap entries for port group enable/disable. RptrPortGrpHwTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1 |
rptrPortGrpHwTrapSetGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1 |
rptrPortGrpHwTrapSetLinkEnables and disables link traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetLink to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetLink to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetLink for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetLink for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetLink for this port group are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 |
rptrPortGrpHwTrapSetSegEnables and disables segmentation traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortHwTrapSetSeg for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortHwTrapSetSeg for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortHwTrapSetSeg for this port group are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3 |
rptrPortGrpSaTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2 |
rptrPortGrpSaTrapTableA list of trap enable/disable at the port group level. Disable
here is equivalent to disable for each port in the port group. SEQUENCE OF RptrPortGrpSaTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1 |
rptrPortGrpSaTrapEntryIndividual trap entries for port group enable/disable. RptrPortGrpSaTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1 |
rptrPortGrpSaTrapSetGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 |
rptrPortGrpSaTrapSetSrcaddrEnables and disables source address traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value
of enable(2) is equivalent to setting all instances of
rtprPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of
other(3) is not allowed.
This object will read with the value of disable(1) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are currently set
to a value of disable(1).
This object will read with the value of enable(2) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are currently set
to a value of enable(2).
This object will read with the value of other(3) if all instances
of rptrPortSaTrapSetSrcaddr for this port group are not currently
set to a value the same value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2 |
rptrPortGrpSrcAddrLockTableThis table defines the status of the port group source address
security locks. SEQUENCE OF RptrPortGrpSrcAddrLockEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.6 |
rptrPortGrpSrcAddrLockEntryDeDefines a status of a particular port group security lock. RptrPortGrpSrcAddrLockEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1 |
rptrPortGrpSrcAddrLockGrpIdDefines a particular port group for which this source address
security lock information pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1 |
rptrPortGrpSrcAddrLockAllows setting of the security lock status for this port group.
unlock(1) - Unlocks the source address lock this group,
lock(2) - Locks the source address for this group,
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2 |
rptrPortGrpSASecuritySecureStateThe state of the source addressing security for this port group.
Ports on the port group that are secure(1), can be locked
in order to enable security. When a value of nonSecure(2) is
returned ports cannot be locked.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3 |
rptrPortGrpSASecurityLearnStateThe learn state of source addressing security for this port group.
This object will only be applied to ports that are unlocked. If set
to learn(1), all addresses are deleted on the port and learning begins
once again. If it is set to noLearn(2), learning stops on the port.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4 |
rptrPortGrpSASecurityLearnModeThe learn mode of source addressing security port group. If set
to oneTime(1), each port is capable of learning two addresses and
securing on both destination and source addresses once they are
locked. If set to continuous(2), all addresses are initially
deleted and each port continuously replaces the existing secure
source address with latest source address it sees.
Setting a value of portMisMatch(3) is invalid. A value of
portMisMatch(3) reflects that not all ports are at the same
value.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5 |
rptrPort OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3 |
rptrPortMgmtTableA list of port management objects for this repeater node. SEQUENCE OF RptrPortMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.1 |
rptrPortMgmtEntryAn entry containing objects pertaining to port management for
a port. RptrPortMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 |
rptrPortMgmtPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 |
rptrPortMgmtPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 |
rptrPortMgmtNameSets/Gets an ASCII name assigned to this port.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 |
rptrPortMgmtAdminStateSetting this object to Enable will cause port to be enabled.
Setting this object to Disable will cause
the port to be disabled. When read this object will return
the state of the object per the last request.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 |
rptrPortMgmtOperStateGet port operational status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 |
rptrPortMgmtPortTypeUniquely defines the repeater port type. A authoritative
identification for a port type. By convention, this value
is allocated within the SMI enterprises subtree
(1.3.6.1.4.1), and provides an easy and unambiguous means to
determine the type of repeater port.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 |
rptrPortStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.2 |
rptrPortPktStatsTblProvides repeater port packet statistics. SEQUENCE OF RptrPortPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 |
rptrPortPktStatsEntryProvides basic statistics for a specific port. RptrPortPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 |
rptrPortPktStatsPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 |
rptrPortPktStatsPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 |
rptrPortPktStatsPacketsGet this port's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 |
rptrPortPktStatsBytesGet this port's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 |
rptrPortPktStatsCollsGet this port's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 |
rptrPortPktStatsErrorsGet this port's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 |
rptrPortPktStatsAlignGet this port's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 |
rptrPortPktStatsCRCGet this port's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 |
rptrPortPktStatsOOWGet this port's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 |
rptrPortPktStatsBroadcastsGet this port's total received broadcast packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10 |
rptrPortPktStatsMulticastsGet this port's total received multicast packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11 |
rptrPortProtocolTblProvides statistics about the protocols seen by the different
ports. SEQUENCE OF RptrPortProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 |
rptrPortProtocolEntryAn entry containing objects pertaining to statistics about
protocols seen by different ports. RptrPortProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 |
rptrPortProtocolPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 |
rptrPortProtocolPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 |
rptrPortProtocolOSIGet this port's total received OSI protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 |
rptrPortProtocolNovellGet this port's total received Novell protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 |
rptrPortProtocolBanyanGet this port's total received Banyan protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 |
rptrPortProtocolDECNetGet this port's total received DECNet protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 |
rptrPortProtocolXNSGet this port's total received XNS protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 |
rptrPortProtocolIPGet this port's total received TCP/IP protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 |
rptrPortProtocolCtronGet this port's total received CTRON Management protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 |
rptrPortProtocolAppletalkGet this port's total received Appletalk protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 |
rptrPortProtocolOtherGet this port's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 |
rptrPortFrameSzTblProvides repeater port frame size statistics. SEQUENCE OF RptrPortFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 |
rptrPortFrameSzEntryDescribes a set of frame size statistics for a specific port. RptrPortFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 |
rptrPortFrameSzPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 |
rptrPortFrameSzPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 |
rptrPortFrameSzRuntGet this port's total received packets of size less than 64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 |
rptrPortFrameSz64To127Get this port's total received packets of size between 64 and
127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 |
rptrPortFrameSz128To255Get this port's total received packets of size between 128
and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 |
rptrPortFrameSz256To511Get this port's total received packets of size between 256
and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 |
rptrPortFrameSz512To1023Get this port's total received packets of size between 512
and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 |
rptrPortFrameSz1024To1518Get this port's total received packets of size between 1024
and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 |
rptrPortFrameSzGiantGet this port's total received packets of size greater than
1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 |
rptrPortAlarmTableA list of port alarm objects for this repeater node. SEQUENCE OF RptrPortAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.3 |
rptrPortAlarmEntryAn entry containing objects pertaining to port alarm objects
for a port group. RptrPortAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 |
rptrPortAlarmPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 |
rptrPortAlarmPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 |
rptrPortAlarmTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 |
rptrPortAlarmTrafThresholdThe maximum number of packets that will be allowed before
an alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 |
rptrPortAlarmTrafPortDisableSet will permit a port to be disabled on a traffic alarm
condition. Get will show whether the port disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 |
rptrPortAlarmCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 |
rptrPortAlarmCollThresholdThe collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 |
rptrPortAlarmCollPortDisableSet will permit a port to be disabled on a collision alarm
condition. Get will show whether the port disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 |
rptrPortAlarmErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 |
rptrPortAlarmErrThresholdGet/Set the percentage of errors per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 |
rptrPortAlarmErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 |
rptrPortAlarmErrPortDisableSet will permit a port to be disabled on an error alarm condition.
Get will show whether the port disabling is allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 |
rptrPortAlarmBroadEnableGet returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 |
rptrPortAlarmBroadThresholdThe broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14 |
rptrPortAlarmBroadPortDisableSet will permit a port to be disabled on a broadcast alarm
condition. Get will show whether the port disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15 |
rptrPortRedundTableA list of port redundancy objects for this repeater node. SEQUENCE OF RptrPortRedundEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.4 |
rptrPortRedundEntryAn entry containing objects pertaining to port redundancy for
a port group. RptrPortRedundEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 |
rptrPortRedundPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 |
rptrPortRedundPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 |
rptrPortRedundCrctNumGet/Set redundant circuit number of redundant circuit that port
is or is to be associated with.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 |
rptrPortRedundTypeGet/Set redundant port type.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 |
rptrPortRedundStatusGet/Set redundant port status.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 |
rptrPortSrcAddrTableA list of port source address objects for this repeater
node. SEQUENCE OF RptrPortSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.5 |
rptrPortSrcAddrEntryAn entry containing objects pertaining to port source
address objects for a port group. RptrPortSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 |
rptrPortSrcAddrPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 |
rptrPortSrcAddrPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 |
rptrPortSrcAddrTopoStateReturns the topological state of the port.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 |
rptrPortSrcAddrForceTrunkWhen this object is set to Force it causes the port
to be placed into a Trunk topological state whether
the network traffic would warrant such a state or not.
When this object is set to NoForce it allows the port
to assume the topological state it would naturally
assume based on the network activity across it.
When read this object reports the current setting.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 |
rptrPortSrcAddrActiveUsersReturns the total number of active users seen by this port.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 |
rptrPortSrcAddrListTableThis table provides information about the source addresses that
have been seen by the differnt ports. SEQUENCE OF RptrPortSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.6 |
rptrPortSrcAddrListEntryA specific source address that has been seen RptrPortSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 |
rptrPortSrcAddrListIdReturns an index associated with the number of address to be returned.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 |
rptrPortSrcAddrListPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 |
rptrPortSrcAddrListPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 |
rptrPortSrcAddrAddressListReturns a source address seen on this port.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 |
rptrPortHardwareTableA list of port hardware objects for this repeater port. SEQUENCE OF RptrPortHardwareEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.7 |
rptrPortHardwareEntryAn entry containing objects pertaining to port hardware for a
hardware port group. RptrPortHardwareEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 |
rptrPortHardwarePortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 |
rptrPortHardwarePortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 |
rptrPortHardwareSegStatusReturns port segmentation status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 |
rptrPortHardwareLinkStatusReturns port link status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 |
rptrPortTrap OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.8 |
rptrPortHwTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1 |
rptrPortHwTrapTableA list of trap enable/disable at the port level. SEQUENCE OF RptrPortHwTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1 |
rptrPortHwTrapEntryIndividual trap entries for port group enable/disable. RptrPortHwTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1 |
rptrPortHwTrapSetPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1 |
rptrPortHwTrapSetPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2 |
rptrPortHwTrapSetLinkEnables and disables link traps for this port.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 |
rptrPortHwTrapSetSegEnables and disables segmentation traps for this port.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 |
rptrPortSaTrapSet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2 |
rptrPortSaTrapTableA list of trap enable/disable at the port level SEQUENCE OF RptrPortSaTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1 |
rptrPortSaTrapEntryIndividual trap entries for port group enable/disable. RptrPortSaTrapEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1 |
rptrPortSaTrapSetPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 |
rptrPortSaTrapSetPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2 |
rptrPortSaTrapSetSrcaddrEnables and disables source address traps for this port.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3 |
rptrPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.9 |
rptrPortSecurityTableThis table defines status of the source lock security. SEQUENCE OF RptrPortSecurityEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 |
rptrPortSecurityEntryDefines lock status for this particular entry. RptrPortSecurityEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 |
rptrPortSecurityPortGrpIdThe port Group ID for which this source address lock entry
pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1 |
rptrPortSecurityPortIdThe port ID for which this source address lock entry pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2 |
rptrPortSecurityLockStatusDefines the lock status for this particular port entry.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3 |
rptrPortSecurityLockAddAddressSetting a value to this object will cause a new entry to be
added to the rptrPortSecurityListTable. When read this object
will display an OCTET STRING of SIZE 6 with each octet containing
a 0.
In general it is possible to add addresses at anytime. However
there are several instances where the firmware and or hardware
can not support the operation. In these instances an error will
be returned if a addition is attempted.rw OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 |
rptrPortSecurityLockDelAddressSetting a value to this object will cause corresponding entry
in the rptrPortSecurityListTable to be deleted. When read
this object returns an OCTET STRING of length 6 with each octet
having the value '0'.
In general it is possible to delete locked addresses at any time.
however there are instances where it is not supported in which
case an error will be returned.rw OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5 |
rptrPortSecurityDisableOnViolationDesignates whether port is disabled if its source address
is violated. A source address violation occurs when a
address is detected which is not in the source address list for
this port. If the port is disabled due to the source address
violation it can be enabled by setting rptrPortMgmtAdminState.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6 |
rptrPortSecurityFullSecEnabledA port that is set to full security and is locked will
scramble ALL packets, which are not contained in the expected
address list, including broadcasts and multicasts. A port
that is set to partial security will allow broadcasts and
multicasts to repeat unscrambled.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7 |
rptrPortSecuritySecureStateThe secure state of the port. If the port is secure(1), it
can be locked in order to enable security. A nonSecure(2)
port cannot be locked.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8 |
rptrPortSecurityForceNonSecureThe force non-secure state of port. If the port is Forced,
Non-Secure via a value of forceNonSecure(2), it is put into a
Non-Secure state, in which case it cannot be locked. If a port is
not forced noForce(1), then it will take on its natural state,
according to the traffic flow on the port.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9 |
rptrPortSecurityLearnStateThe learn state of the port. This object will only
be applied to a port that is unlocked. If set to learn(1), all
addresses are deleted on the port and learning begins once again.
If it is set to noLearn(2), learning stops on the port.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10 |
rptrPortSecurityLearnModeThe learn mode of the port. If set to oneTime(1),
the port is capable of learning two addresses and securing
on both destination and source addresses (upon locking port).
If set to continuous(2), all addresses are
initially deleted and the port continuously replaces the existing
secure source address with the latest source address it sees.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11 |
rptrPortSecurityListTableThis table defines a list of all source address locks maintained
for the specified port. SEQUENCE OF RptrPortSecurityListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2 |
rptrPortSecurityListEntryAn entry containing objects pertaining to source address locks
for a port group. RptrPortSecurityListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1 |
rptrPortSecurityListPortGrpIdThe port group for which this security list entry pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1 |
rptrPortSecurityListPortIdThe port ID for which this source address lock list pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2 |
rptrPortSecurityListIndexA unique index for the source address entries.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3 |
rptrPortSecurityListAddressDefines the particular source address that has been locked.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4 |
rptrPortAssoc OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.4 |
rptrPortAssocTableThis table defines the port association for those switching
MIMs that support this functionality. SEQUENCE OF RptrPortAssocEntry .1.3.6.1.4.1.52.4.1.1.1.4.4.1 |
rptrPortAssocEntryDescribes a particular port association entry. RptrPortAssocEntry .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1 |
rptrPortAssocBoardThe board number for which this port association information
pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1 |
rptrPortAssocStatusThis object describes the status of the user selectable port.
On a TPXMIM34 this is port 13 which may either be an EPIM or
default configuration.
A value of defaultPort(1) restores the default configuration.
A value of otherPort(2) may imply the use of the EPIM connection.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2 |