REPEATER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for REPEATER-MIB.
241
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
241 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
RFC1155-SMI Unknown .1.3.6.1.4.1.52 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.52.4 |
ctron OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1 |
ctphysical OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1 |
repeater OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1 |
repeaterRev4 OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4 |
rptr OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1 |
rptrMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.1 |
rptrMgmtNameThe ASCII name assigned to this network.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 |
rptrMgmtPortCountTotal number of ports residing on this lan segment.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 |
rptrMgmtPortsEnableSetting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 |
rptrMgmtPortsOnGet the total number of ON ports in this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 |
rptrMgmtPortsOperGet the number of operational ports in this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 |
rptrMgmtBoardMapGet a map of the chassis slots occupied by the boards in
this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 |
rptrMgmtInterfaceNumGet the MIBII interface number of this network. A return of zero will
mean this network is not associated with a MIBII interface.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 |
rptrStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2 |
rptrPktStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1 |
rptrPktStatsPacketsGet this repeater's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 |
rptrPktStatsBytesGet this repeater's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 |
rptrPktStatsCollsGet this repeater's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 |
rptrPktStatsErrorsGet this repeater's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 |
rptrPktStatsAlignGet this repeater's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 |
rptrPktStatsCRCGet this repeater's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 |
rptrPktStatsOOWGet this repeater's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 |
rptrPktStatsNoRscThis counter is the number of packets on this network that the
hardware has processed that the management has either not seen yet,
in the case of an active network, or has missed missed all
together, in the case of a once active network.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 |
rptrProtocols OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2 |
rptrProtocolsOSIGet this repeater's total received OSI packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 |
rptrProtocolsNovellGet this repeater's total received Novell packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 |
rptrProtocolsBanyanGet this repeater's total received Banyan packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 |
rptrProtocolsDECNetGet this repeater's total received DECNet packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 |
rptrProtocolsXNSGet this repeater's total received XNS packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 |
rptrProtocolsIPGet this repeater's total received TCP/IP packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 |
rptrProtocolsCtronGet this repeater's total received CTRON Management packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 |
rptrProtocolsAppletalkGet this repeater's total received Appletalk packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 |
rptrProtocolsOtherGet this repeater's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 |
rptrFrameSizes OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3 |
rptrFrameSzRuntGet this repeater's total received packets of size less than
64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 |
rptrFrameSz64To127Get this repeater's total received packets of size between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 |
rptrFrameSz128To255Get this repeater's total received packets of size between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 |
rptrFrameSz256To511Get this repeater's total received packets of size between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 |
rptrFrameSz512To1023Get this repeater's total received packets of size between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 |
rptrFrameSz1024To1518Get this repeater's total received packets of size between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 |
rptrFrameSzGiantGet this repeater's total received packets of size greater
than 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 |
rptrAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.3 |
rptrAlarmsTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 |
rptrAlarmsTrafThresholdGet/Set packet threshold within the timebase that will cause
an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 |
rptrAlarmsCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 |
rptrAlarmsCollThresholdGet/Set the number of collisions per good packet within
the timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 |
rptrAlarmsErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 |
rptrAlarmsErrThresholdGet/Set the percentage of errors per good packet within
the timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 |
rptrAlarmsErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
No_resource - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 |
rptrAlarmsAlarmTimebaseGet/Set alarm timebase.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 |
rptrRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.4 |
rptrRedund OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1 |
rptrRedundResetIf this object is set to Reset it will cause a reset
of the redundancy object to occur. Setting this
object to NoReset will do nothing. This object will always
be read as NoReset.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 |
rptrRedundPollIntervalGet/Set the number of seconds between polls for redundancy.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 |
rptrRedundTestTODGet/Set the time of day at which the redundant circuits will
be tested. The format of the time string is hh:mm:ss.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 |
rptrRedundPerformTestIf this object is set to Test it will cause a test of the
redundant circuits to be performed. Setting this object to
NoTest will have no effect. When read this object will always
return NoTest.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 |
rptrRedundMaxCrctsReturns the maximum number of circuits which may exist on this
network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 |
rptrRedundCrctTableA list of redundant circuit objects for this repeater. SEQUENCE OF RptrRedundCrctEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 |
rptrRedundCrctEntryA list of objects for a particular redundant circuit. RptrRedundCrctEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 |
rptrRedundCrctIdReturns the index for a member circuit in the table of
redundant circuits.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 |
rptrRedundCrctNameGet/Set the name of the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 |
rptrRedundCrctRetrysGet/Set the the number of unanswered polls allowed for
the circuit.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 |
rptrRedundCrctNumBPsGet the number of board/port combinations associated with
the circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 |
rptrRedundCrctNumAddrGet the number of IP Addresses associated with the circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 |
rptrRedundCrctAddAddrAdd an IP Address to the polling list for the indicated circuit.rw NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 |
rptrRedundCrctDelAddrDelete an IP Address from the polling list of the indicated
circuit.rw NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 |
rptrRedundCrctEnableIf this object is set to Enable, the circuit is enabled. If
this object is set to Disable, the circuit is disbabled. When
read, this object returns the state of the object based on the
last request made.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 |
rptrRedundCrctResetIf this object is set to Reset, the circuit is reset. All
of the circuit's associated boards and ports are returned to
NOT_USED, any associated IP Addresses are purged from the
circuit's address list, the name is cleared, and the retry
count is reset to a default value. Setting this object to
NoReset has no effect. When read, NoReset is always returned.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 |
rptrRedundPortTableA list of redundant port objects for this repeater. SEQUENCE OF RptrRedundPortEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 |
rptrRedundPortEntryA redundant port entry containing objects pertaining to
a particular redundant port. RptrRedundPortEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 |
rptrRedundPortIdA unique value identifying an element in a sequence of member
ports which belong to a circuit in the table of redundant
circuits. This value is not a port number; rather it is a value
which goes from 1 to the maximum number of ports which may be
included in a redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 |
rptrRedundPortCrctIdA unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 |
rptrRedundPortNumReturns the port number of a member port belonging to a redundant
circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 |
rptrRedundPortBoardNumReturns the board number of a member port belonging to a
redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 |
rptrRedundPortTypeReturn the state of a port associated with the indicated circuit.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 |
rptrRedundAddrTable SEQUENCE OF RptrRedundAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 |
rptrRedundAddrEntry RptrRedundAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 |
rptrRedundAddrIdA unique value identifying an element in a sequence of member
IP Addresses which belong to a circuit in the table of redundant
circuits. This value goes from 1 to the maximum number of IP
Addresses which may be included in a redundant circuit.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 |
rptrRedundAddrCrctIdA unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 |
rptrRedundAddrIPAddrReturns an IP Address associated with the indicated circuit.ro NetworkAddress .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 |
rptrSourceAddress OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.5 |
rptrSrcAddrListTable SEQUENCE OF RptrSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 |
rptrSrcAddrListEntry RptrSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 |
rptrSrcAddrListIdReturns an index into a table of source address seen by this
repeater.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 |
rptrSrcAddrAddressListReturns a source address seen by this repeater.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 |
rptrSrcAddrSrcTable SEQUENCE OF RptrSrcAddrSrcTableEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 |
rptrSrcAddrSrcTableEntry RptrSrcAddrSrcTableEntry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 |
rptrSrcAddrSrcTableEntryIdReturns the source address to which this table's information
pertains.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 |
rptrSrcAddrSrcTableEntryPortReturns the port# of the port that sourced the source address.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 |
rptrSrcAddrSrcTableEntryPortGroupReturns the port group# of the port that sourced the source address.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 |
rptrSrcAddrMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3 |
rptrSrcAddrMgmtSrcAgeIntervalGet/Set source addressing ageing interval.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 |
rptrSrcAddrMgmtPortLockSetting this object to Lock will activate the network port
security lock.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 |
rptrSrcAddrMgmtActiveUsersGet the number of active users on this network.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 |
rptrPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2 |
rptrPortGrpMgmtTable SEQUENCE OF RptrPortGrpMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.1 |
rptrPortGrpMgmtEntry RptrPortGrpMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 |
rptrPortGrpMgmtGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 |
rptrPortGrpMgmtNameGets/Sets a name for the specified port group.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 |
rptrPortGrpMgmtPortCountGet total number of ports contained on the board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 |
rptrPortGrpMgmtPortsEnableSetting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 |
rptrPortGrpMgmtPortsOnGet total number of ON ports on the board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 |
rptrPortGrpMgmtPortsOperGet total number of operational ports on the board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 |
rptrPortGrpStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.2.2 |
rptrPortGrpPktStatsTbl SEQUENCE OF RptrPortGrpPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 |
rptrPortGrpPktStatsEntry RptrPortGrpPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 |
rptrPortGrpPktStatsIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 |
rptrPortGrpPktStatsPktsReturn this port group's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 |
rptrPortGrpPktStatsBytesReturn this port group's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 |
rptrPortGrpPktStatsCollsReturn this port group's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 |
rptrPortGrpPktStatsErrorsReturn this port group's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 |
rptrPortGrpPktStatsAlignReturn this port group's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 |
rptrPortGrpPktStatsCRCReturn this port group's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 |
rptrPortGrpPktStatsOOWReturn this port group's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 |
rptrPortGrpProtocolTbl SEQUENCE OF RptrPortGrpProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 |
rptrPortGrpProtocolEntry RptrPortGrpProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 |
rptrPortGrpProtocolIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 |
rptrPortGrpProtocolOSIReturn this port group's total received OSI packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 |
rptrPortGrpProtocolNovellReturn this port group's total received Novell packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 |
rptrPortGrpProtocolBanyanReturn this port group's total received Banyan packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 |
rptrPortGrpProtocolDECNetReturn this port group's total received DECNet packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 |
rptrPortGrpProtocolXNSReturn this port group's total received XNS packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 |
rptrPortGrpProtocolIPReturn this port group's total received TCP/IP packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 |
rptrPortGrpProtocolCtronReturn this port group's total received CTRON Management packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 |
rptrPortGrpProtocolAppletalkReturn this port group's total received Appletalk packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 |
rptrPortGrpProtocolOtherReturn this port group's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 |
rptrPortGrpFrameSzTbl SEQUENCE OF RptrPortGrpFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 |
rptrPortGrpFrameSzEntry RptrPortGrpFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 |
rptrPortGrpFrameSzIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 |
rptrPortGrpFrameSzRuntReturn this port group's total received packets of size less
than 64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 |
rptrPortGrpFrameSz64To127Return this port group's total received packets of size between
64 and 127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 |
rptrPortGrpFrameSz128To255Return this port group's total received packets of size between
128 and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 |
rptrPortGrpFrameSz256To511Return this port group's total received packets of size between
256 and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 |
rptrPortGrpFrameSz512To1023Return this port group's total received packets of size between
512 and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 |
rptrPortGrpFrameSz1024To1518Return this port group's total received packets of size between
1024 and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 |
rptrPortGrpFrameSzGiantReturn this port group's total received packets of size greater
than 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 |
rptrPortGrpAlarmTable SEQUENCE OF RptrPortGrpAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.3 |
rptrPortGrpAlarmEntry RptrPortGrpAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 |
rptrPortGrpAlarmIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 |
rptrPortGrpAlarmTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 |
rptrPortGrpAlarmTrafThresholdGet/Set packet threshold within the timebase that will cause
an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 |
rptrPortGrpAlarmTrafGrpDisableSet will permit a port group to be disabled on a traffic alarm
condition. Get will show whether the port group disabling is
allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 |
rptrPortGrpAlarmCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarmsrw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 |
rptrPortGrpAlarmCollThresholdGet/Set the number of collisions per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 |
rptrPortGrpAlarmCollBdDisableSet will permit a board to be disabled on a collision alarm
condition. Get will show whether the board disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 |
rptrPortGrpAlarmErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarmsrw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 |
rptrPortGrpAlarmErrThresholdGet/Set the percentage of errors per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 |
rptrPortGrpAlarmErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 |
rptrPortGrpAlarmErrGrpDisableSet will permit a port group to be disabled on an error alarm
condition. Get will show whether the port group disabling is
allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 |
rptrPortGrpSrcAddrTable SEQUENCE OF RptrPortGrpSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.4 |
rptrPortGrpSrcAddrEntry RptrPortGrpSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 |
rptrPortGrpSrcAddrIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 |
rptrPortGrpSrcAddrActiveUsersReturns the total number of active users seen by this port group.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 |
rptrPort OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3 |
rptrPortMgmtTable SEQUENCE OF RptrPortMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.1 |
rptrPortMgmtEntry RptrPortMgmtEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 |
rptrPortMgmtPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 |
rptrPortMgmtPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 |
rptrPortMgmtNameSets/Gets an ASCII name assigned to this port.rw DisplayString .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 |
rptrPortMgmtAdminStateSetting this object to Enable will cause port to be enabled.
Setting this object to Disable will cause
the port to be disabled. When read this object will return
the state of the object per the last request.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 |
rptrPortMgmtOperStateGet port operational status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 |
prtrPortMgmtPortTypeUniquely defines the repeater port type. A authoritative
identification for a port type. By convention, this value
is alocated within the SMI enterprises subtree
(1.3.6.1.4.1), and provides an easy and unambiguous means to
determine the type of repeater port.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 |
rptrPortStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.1.4.3.2 |
rptrPortPktStatsTbl SEQUENCE OF RptrPortPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 |
rptrPortPktStatsEntry RptrPortPktStatsEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 |
rptrPortPktStatsPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 |
rptrPortPktStatsPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 |
rptrPortPktStatsPacketsGet this port's total received packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 |
rptrPortPktStatsBytesGet this port's total received bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 |
rptrPortPktStatsCollsGet this port's total collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 |
rptrPortPktStatsErrorsGet this port's total errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 |
rptrPortPktStatsAlignGet this port's total frame alignment errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 |
rptrPortPktStatsCRCGet this port's total CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 |
rptrPortPktStatsOOWGet this port's total out-of-window collisions.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 |
rptrPortProtocolTbl SEQUENCE OF RptrPortProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 |
rptrPortProtocolEntry RptrPortProtocolEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 |
rptrPortProtocolPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 |
rptrPortProtocolPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 |
rptrPortProtocolOSIGet this port's total received OSI protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 |
rptrPortProtocolNovellGet this port's total received Novell protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 |
rptrPortProtocolBanyanGet this port's total received Banyan protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 |
rptrPortProtocolDECNetGet this port's total received DECNet protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 |
rptrPortProtocolXNSGet this port's total received XNS protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 |
rptrPortProtocolIPGet this port's total received TCP/IP protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 |
rptrPortProtocolCtronGet this port's total received CTRON Management protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 |
rptrPortProtocolAppletalkGet this port's total received Appletalk protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 |
rptrPortProtocolOtherGet this port's total received unknown protocol packets.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 |
rptrPortFrameSzTblDescription goes here. SEQUENCE OF RptrPortFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 |
rptrPortFrameSzEntryDescription goes here. RptrPortFrameSzEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 |
rptrPortFrameSzPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 |
rptrPortFrameSzPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 |
rptrPortFrameSzRuntGet this port's total received packets of size less than 64 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 |
rptrPortFrameSz64To127Get this port's total received packets of size between 64 and
127 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 |
rptrPortFrameSz128To255Get this port's total received packets of size between 128
and 255 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 |
rptrPortFrameSz256To511Get this port's total received packets of size between 256
and 511 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 |
rptrPortFrameSz512To1023Get this port's total received packets of size between 512
and 1023 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 |
rptrPortFrameSz1024To1518Get this port's total received packets of size between 1024
and 1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 |
rptrPortFrameSzGiantGet this port's total received packets of size greater than
1518 bytes.ro Counter .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 |
rptrPortAlarmTable SEQUENCE OF RptrPortAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.3 |
rptrPortAlarmEntry RptrPortAlarmEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 |
rptrPortAlarmPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 |
rptrPortAlarmPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 |
rptrPortAlarmTrafEnableGet returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 |
rptrPortAlarmTrafThresholdGet/Set packet threshold within the timebase that will cause
an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 |
rptrPortAlarmTrafPortDisableSet will permit a port to be disabled on a traffic alarm
condition. Get will show whether the port disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 |
rptrPortAlarmCollEnableGet returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 |
rptrPortAlarmCollThresholdGet/Set the number of collisions per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 |
rptrPortAlarmCollPortDisableSet will permit a port to be disabled on a collision alarm
condition. Get will show whether the port disabling is allowed
or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 |
rptrPortAlarmErrEnableGet returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarmsrw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 |
rptrPortAlarmErrThresholdGet/Set the percentage of errors per good packet within the
timebase that will cause an alarm.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 |
rptrPortAlarmErrSourceGet/Set a bit encoded map of which errors to include in the
error sum, as follows:
CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_errs - Bit 3
undefined - Bit 4
Giants - Bit 5rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 |
rptrPortAlarmErrPortDisableSet will permit a port to be disabled on an error alarm condition.
Get will show whether the port disabling is allowed or not.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 |
rptrPortRedundTable SEQUENCE OF RptrPortRedundEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.4 |
rptrPortRedundEntry RptrPortRedundEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 |
rptrPortRedundPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 |
rptrPortRedundPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 |
rptrPortRedundCrctNumGet/Set redundant circuit number of redundant circuit that port
is or is to be associated with.rw INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 |
rptrPortRedundTypeGet/Set redundant port type.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 |
rptrPortRedundStatusGet/Set redundant port status.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 |
rptrPortSrcAddrTable SEQUENCE OF RptrPortSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.5 |
rptrPortSrcAddrEntry RptrPortSrcAddrEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 |
rptrPortSrcAddrPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 |
rptrPortSrcAddrPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 |
rptrPortSrcAddrTopoStateReturns the topological state of the port.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 |
rptrPortSrcAddrForceTrunkWhen this object is set to Force it causes the port
to be placed into a Trunk topological state whether
the network traffic would warrant such a state or not.
When this object is set to NoForce it allows the port
to assume the topological state it would naturally
assume based on the network activity acrossed it.
When read this object reports the current setting.rw Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 |
rptrPortSrcAddrActiveUsersReturns the total number of active users seen by this port.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 |
rptrPortSrcAddrListTable SEQUENCE OF RptrPortSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.6 |
rptrPortSrcAddrListEntry RptrPortSrcAddrListEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 |
rptrPortSrcAddrListIdReturns an index associated with the number of address to be returned.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 |
rptrPortSrcAddrListPortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 |
rptrPortSrcAddrListPortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 |
rptrPortSrcAddrAddressListReturns a source address seen on this port.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 |
rptrPortHardwareTable SEQUENCE OF RptrPortHardwareEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.7 |
rptrPortHardwareEntry RptrPortHardwareEntry .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 |
rptrPortHardwarePortIdReturns an index to a port for which the information in this
table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 |
rptrPortHardwarePortGrpIdReturns an index to a port group for which the information in
this table pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 |
rptrPortHardwareSegStatusReturns port segmentation status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 |
rptrPortHardwareLinkStatusReturns port link status.ro Enumeration .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 |