RC-SLPP-MIB
The RC-SLPP-MIB module provides enterprise-specific monitoring and management capabilities for the SLPP (Secure Link Protection Protocol) feature on compatible network hardware. It exposes operational metrics including session states, link status, and security event counters to facilitate the verification of encrypted tunnel integrity and failover mechanisms.
Imported Objects
Objects
40 total| Object Name |
|---|
rcSlppMibEnterprise MIB for SLPP MODULE-IDENTITY .1.3.6.1.4.1.2272.1.64.1 |
rcSlppNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.0 |
rcnSlppPortDownEventA port down event that has occurred due to SLPP. The user is
notified of the expected Vlan ID along with the Vlan ID and source
MAC address of the packet coming in on the port identified. The
first two objects can be used to lookup instance info for port id
and vlan id. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.1 |
rcnSlppPortDownEventNewA port down event that has occurred due to SLPP. The trap
includes the port and its Vlan which receives the packet, and
along with the Vlan ID and source MAC address of the packet coming in
on the port identified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.2 |
rcnSlppLoopOnDiffVlanIndicates SLPP received its own packet but with the TX VLAN not
equal to the RX VLAN. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.3 |
rcnSlppGuardHoldDownExpiredIndicates that the SLPP-guard hold-down timer has expired on a port
on which SLPP-guard is enabled, and the port has been re-enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.4 |
rcnSlppGuardPacketReceivedIndicates an SLPP packet has been received on a port on which
SLPP-guard is enabled. The port has been disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.5 |
rcSlppObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.1 |
rcSlppScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.1.1 |
rcSlppGlobalEnableGlobal enable/disable for the simple loop prevention protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.1.1 |
rcSlppTransmissionIntervalThe interval (in milliseconds) for which loop detection occurs.rw Integer32 .1.3.6.1.4.1.2272.1.64.1.1.1.2 |
rcSlppEtherTypeSLPP Protocol Identification. The value is normally in Hex.rw Integer32(1..'FFFF'h) .1.3.6.1.4.1.2272.1.64.1.1.1.3 |
rcSlppTimeoutThis value specifies the time period for which a port
will remain disabled. When SLPP disables a port, after
this time period expires, the port will become
re-enabled. A value of 0 means ports will never
be re-enabled.rw Unsigned32 .1.3.6.1.4.1.2272.1.64.1.1.1.4 |
rcSlppUniPortsContains UNI ports added under SLPP global configrw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.64.1.1.1.5 |
rcSlppGuardEtherTypeSLPP Guard ether type.rw Integer32(1..'FFFF'h) .1.3.6.1.4.1.2272.1.64.1.1.1.6 |
rcSlppVlanTableTable of VLANs for which simple loop detection occur on. SEQUENCE OF RcSlppVlanEntry .1.3.6.1.4.1.2272.1.64.1.1.2 |
rcSlppVlanEntrySLPP VLAN entry. RcSlppVlanEntry .1.3.6.1.4.1.2272.1.64.1.1.2.1 |
rcSlppVlanVlanIdVlan id for which simple loop detection occurs on. Integer32 .1.3.6.1.4.1.2272.1.64.1.1.2.1.1 |
rcSlppVlanSlppEnableFlag to indicate whether the VLAN entry is active or not for SLPP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.2.1.2 |
rcSlppVlanRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.2.1.3 |
rcSlppPortTableTable of ports for which simple loop detection occurs on. SEQUENCE OF RcSlppPortEntry .1.3.6.1.4.1.2272.1.64.1.1.3 |
rcSlppPortEntrySLPP Port entry. RcSlppPortEntry .1.3.6.1.4.1.2272.1.64.1.1.3.1 |
rcSlppPortIfIndexPort on which simple loop detection occurs on. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.64.1.1.3.1.1 |
rcSlppPortPktRxThresholdOnce the number of SLPP packets received on this port reaches this threshold
action will be taken. Normally, the port will be shutdown.rw Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.2 |
rcSlppPortSlppEnableFlag to indicate whether the port entry is active or not for SLPP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.3.1.3 |
rcSlppPortRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.3.1.4 |
rcSlppPortIncomingVlanIdVlan id of the classified packet on the port brought down by
SLPP.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.5 |
rcSlppPortSrcNodeTypeThe src node type of the received slpp Pkt.ro Enumeration .1.3.6.1.4.1.2272.1.64.1.1.3.1.6 |
rcSlppPortPktRxCountTotal number of SLPP packets received on the portro Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.7 |
rcSlppPortGuardEnableFlag to indicate if SLPP-guard is enabled on the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.3.1.8 |
rcSlppPortGuardTimeoutThis value specifies the time period for which a port will remain
disabled. When SLPP-guard disables a port, after this time period
expires, the port will become re-enabled. A value of 0 means ports
will never be re-enabled.rw Integer32 (0|10..65535) .1.3.6.1.4.1.2272.1.64.1.1.3.1.9 |
rcSlppPortGuardStatusThe object indicates the SLPP-guard status of a port.ro Enumeration .1.3.6.1.4.1.2272.1.64.1.1.3.1.10 |
rcSlppPortGuardTimerCountThis value specifies the time period that has passed since
a port was administratively disabled by SLPP-guard. When this
object reaches the timeout value (rcSlppPortGuardTimeout),
the port will become re-enabled.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.11 |
rcSlppNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.2 |
rcSlppIncomingVlanIdVlan id of the classified packet on the port brought down by SLPP.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.2.1 |
rcSlppSrcMacAddressSource MAC address in the classified packet on the port brought
down by SLPP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.2.2 |
rcSlppRxPortIndexPort on which the SLPP packet is received.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.64.1.2.3 |
rcSlppRxVlanIdVlan on which the SLPP packet is received.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.2.4 |
rcSlppTxVlanIdVlan on which the SLPP packet is sent.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.2.5 |
rcSlppGuardPortIfIndexPort on which the SLPP-guard packet is received.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.64.1.2.6 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
SNMP MIB module
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
SNMP MIB module