RC-IPV6-MIB
AI MIB Summary
The RC-IPV6-MIB module provides vendor-specific management interfaces for Accelar product family devices to monitor IPv6 routing table states, neighbor discovery parameters, and interface statistics. It enables the collection of protocol-specific counters and error metrics required for troubleshooting IPv6 connectivity and performance within the Accelar network infrastructure.
Enterprise MIB for the Accelar product family.
Main OID:
rcIpv6Mib.1.3.6.1.4.1.2272.1.62.1
148
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
148 total| Object Name |
|---|
rcIpv6MibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.62.1 |
rcIpv6Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.0 |
rcIpv6Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.1 |
rcIpv6Scalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.1.1 |
rcIpv6IcmpErrorIntervalThe rate (in milliseconds) at which
ICMP error messages can be sent out.
A value of zero means not be send any.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.1.1 |
rcIpv6MulticastAdminStatusThis indicates the global admin status for
multicast.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.2 |
rcIpv6IcmpNetUnreachUsed to set the icmp net unreach feature enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.3 |
rcIpv6IcmpRedirectMsgused to set the icmp redirect feature enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.4 |
rcIpv6IcmpErrorQuotaThe number of ICMP error messages that can
be sent out during ICMP error interval.
A value of zero means not be send any.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.1.5 |
rcIpv6GlobalAdminEnabledIndicates whether IPv6 has been administratively
enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.6 |
rcIpv6GlobalOperEnabledIndicates whether IPv6 is currently enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.7 |
rcIpv6PrefixListTableSizeSize of Ipv6 Prefix List Tablero Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.1.8 |
rcIpv6InterfaceTableThis table contains list of IPv6 interfaces and
per-interface IPv6-specific information. SEQUENCE OF RcIpv6InterfaceEntry .1.3.6.1.4.1.2272.1.62.1.1.2 |
rcIpv6InterfaceEntryAn entry of ipv6 interface In Table containing
per-interface information. RcIpv6InterfaceEntry .1.3.6.1.4.1.2272.1.62.1.1.2.1 |
rcIpv6InterfaceIfIndexAn unique value to identify a physical interface
or a logical interface (VLAN).
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.2.1.1 |
rcIpv6InterfaceIdentifierIPv6 address
interface identifiers. This is a binary string
of up to 8 octets in network byte-order.rw Ipv6AddressIfIdentifier (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.2 |
rcIpv6InterfaceIdentifierLengthThe length of the Interface Identifier in bits.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.3 |
rcIpv6InterfaceDescrA textual string containing information about the
interface. This string may be set by network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.4 |
rcIpv6InterfaceVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.5 |
rcIpv6InterfaceTypeThe interface type.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.2.1.6 |
rcIpv6InterfaceReasmMaxSizeMTU for this IPv6 interface, this value should
be same for all the ip addresses defined on
this interface.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.7 |
rcIpv6InterfacePhysAddressThe media-dependent `physical' address, for the
ethernet media it is the MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.8 |
rcIpv6InterfaceAdminStatusThe indication of whether IPv6 is enabled (up)
or disabled (down) on this interface. This object does not
affect the state of the interface itself, only its
connection to an IPv6 stack.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.9 |
rcIpv6InterfaceOperStatusOperating status of the interface.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.2.1.10 |
rcIpv6InterfaceReachableTimeThe time (in milliseconds) a neighbor is considered
reachable after receiving a reachability confirmation.
REFERENCE RFC2461, Section 6.3.2rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.11 |
rcIpv6InterfaceRetransmitTimeThe time (in milliseconds) between retransmissions of
Neighbor Solicitation messages to a neighbor when
resolving the address or when probing the reachability
of a neighbor. REFERENCE RFC2461, Section 6.3.2rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.12 |
rcIpv6InterfaceMulticastAdminStatusThis indicates the admin status for multicast
for this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.13 |
rcIpv6InterfaceRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.14 |
rcIpv6InterfaceDhcpEnabledEnable or disable DHCP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.15 |
rcIpv6AddressTableThis table contains addressing information relevant
to the entity's interfaces.
This table does not contain multicast address
information. Tables for such information should be
contained in multicast specific MIBs such as RFC3019.
While this table is writable the user will note that several
objects, such as rcIpv6AddressOrigin, are not. The
intention in allowing a user to write to this table is to
allow them to add or remove any entry that isn't permanent.
The user should be allowed to modify objects and entries
when that would not cause inconsistencies within the table.
Allowing write access to objects such as rcIpv6AddressOrigin
could allow a user to insert an entry and then label it
incorrectly. SEQUENCE OF RcIpv6AddressEntry .1.3.6.1.4.1.2272.1.62.1.1.3 |
rcIpv6AddressEntryAn address mapping for a particular interface. Note that
when an address is added to an interface the resulted
prefix is added to that interface. RcIpv6AddressEntry .1.3.6.1.4.1.2272.1.62.1.1.3.1 |
rcIpv6AddressIfIndexThe index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfIndex field in the
rcIpv6InterfaceIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.3.1.1 |
rcIpv6AddressAddrThe IPv6 address to which this entry's addressing
information pertains. This is one of the ipv6 addresses that
this interface(identified by the rcIpv6AddressIfIndex) has.
Implementors need to be aware that if the size of
ipAddressAddr exceeds 116 octets then OIDS of instances of
columns in this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c or SNMPv3. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.2 |
rcIpv6AddressTypeThe type of address. It is either unicast or anycast
IPv6 addresses (RFC3513).rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.3.1.3 |
rcIpv6AddressPrefixLengthPrefix Length value for this address. Cannot be changed
after the creation. This field MUST be provided in order
to create an entry in this table.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.3.1.4 |
rcIpv6AddressPrefixA pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.5 |
rcIpv6AddressOriginThe origin of the address. The origin of the address, one
of: other(1),manual(2), dhcp(4),linklayer(5), random(6)ro IpAddressOriginTC .1.3.6.1.4.1.2272.1.62.1.1.3.1.6 |
rcIpv6AddressStatusThe status of the address, describing if the address can be
used for communication. It will One of: preferred(1),
deprecated(2),invalid(3),inaccessible(4),unknown(5),
tentative(6), duplicate(7)ro IpAddressStatusTC .1.3.6.1.4.1.2272.1.62.1.1.3.1.7 |
rcIpv6AddressCreatedThe value of sysUpTime at the time this entry was
created. If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.8 |
rcIpv6AddressLastChangedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.9 |
rcIpv6AddressRowStatusThe status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rcIpv6AddressIfIndex has been set to a valid index. Only
createAndGo and Delete vlaues are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.10 |
rcIpv6PrefixTableThis table allows the user to
determine the source of an IP address or set of
IP addresses and allows other tables to
share the information via pointer rather than by copying.
For example when the node configures both a unicast and
anycast address for a prefix the ipAddressPrefix objects for
those addresses will point to a single row in this table.
This table primarily provides support for IPv6 prefixes and
several of the objects are less meaningful for IPv4. The
table continues to allow IPv4 addresses to allow future
flexibility. In order to promote a common configuration
this document includes suggestions for default values for
IPv4 prefixes. Each of these values may be overridden if an
object is meaningful to the node.
All prefixes used by this entity should be included in this
table independent of how the entity learned the prefix.
(This table isn't limited to prefixes learned from router
advertisements.) SEQUENCE OF RcIpv6PrefixEntry .1.3.6.1.4.1.2272.1.62.1.1.4 |
rcIpv6PrefixEntryAn entry of ipv6 prefix In the Table. RcIpv6PrefixEntry .1.3.6.1.4.1.2272.1.62.1.1.4.1 |
rcIpv6PrefixIfIndexAn unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.4.1.1 |
rcIpv6PrefixAddrPrefix to create an ipv6 address in ipv6 interface
table. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.2 |
rcIpv6PrefixLengthMask to create an ipv6 prefix entry
either will be advertised or suppressed INTEGER .1.3.6.1.4.1.2272.1.62.1.1.4.1.3 |
rcIpv6PrefixVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.ro INTEGER .1.3.6.1.4.1.2272.1.62.1.1.4.1.4 |
rcIpv6PrefixUseDefaultValSelect one of the value to set/use it's value
to default value. This is a bitmask field,
setting all the bits means that all the options
will be reverted to default values.rw Bits .1.3.6.1.4.1.2272.1.62.1.1.4.1.5 |
rcIpv6PrefixValidLifeValid lifetime in seconds, indicates
how long this prefix advertised in
the nbr advertisement is valid.rw Integer32 .1.3.6.1.4.1.2272.1.62.1.1.4.1.6 |
rcIpv6PrefixPreferredLifePreferred lifetime in seconds, indicates
how long this prefix advertised in
advertisemt for this prefix.rw Integer32 .1.3.6.1.4.1.2272.1.62.1.1.4.1.7 |
rcIpv6PrefixAtValidLifeIs the date and time, upon reaching this
value the prefix will be expired,
if configured this option will
be included in the neighbor advertisement
for this prefix.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.8 |
rcIpv6PrefixAtPreferredLifeIs the date and time, upon reaching this
value the prefix will be expired,
if configured this option will be
included in the neighbor advertisement
for this prefix.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.9 |
rcIpv6PrefixInfiniteif set the prefix's valid lifetime will
not exprie.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.10 |
rcIpv6PrefixOnLinkFlagif set then this prefix can be used
for onlink determination. This value
be placed in the L-bit field in the prefix
information option. It is a 1 bit flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.11 |
rcIpv6PrefixAutoFlagif set then this prefix can be used
for autonomous address config. This value
be placed in the auto-flag field in the prefix
information option. It is a 1 bit flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.12 |
rcIpv6PrefixAddressEuiUse an EUI-64 interface ID in the low-order
64bits of the address when not specified in the address field.
If enabled use EUI, otherwise use EUI-64 and complement U/L
(Universal/Local bit). This operation should
be allowed for both global and link local
addresses. Once the entry is create cannot modify this field.
This will be valid to use only when the PrefixLength is 64 or lessrw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.4.1.13 |
rcIpv6PrefixNoAdvertiseif set then this prefix can not be included
in the neighbor advertisement.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.14 |
rcIpv6PrefixRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.15 |
rcIpv6RouterAdvertTableThe table containing information
used to construct router advertisements. SEQUENCE OF RcIpv6RouterAdvertEntry .1.3.6.1.4.1.2272.1.62.1.1.5 |
rcIpv6RouterAdvertEntryAn entry containing information used to construct
router advertisements. RcIpv6RouterAdvertEntry .1.3.6.1.4.1.2272.1.62.1.1.5.1 |
rcIpv6RouterAdvertIfIndexAn unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.5.1.1 |
rcIpv6RouterAdvertSendAdvertsA flag indicating whether or not the router sends periodic
router advertisements and responds to router solicitations
on this interface. REFERENCE RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.2 |
rcIpv6RouterAdvertUseDefaultValSelect one of the value to set/use it's
value to default value, or set all the bits
to indicate all the options will be set to
their default value.rw Bits .1.3.6.1.4.1.2272.1.62.1.1.5.1.3 |
rcIpv6RouterAdvertMaxIntervalConfigure the max interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 4 seconds and
no greater than 1800.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.4 |
rcIpv6RouterAdvertMinIntervalConfigure the min interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 3 seconds and
no greater than .75* max-interval.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.5 |
rcIpv6RouterAdvertReachableTimeThe value (in milliseconds) to be placed in the router advertisement message
sent by the router. The value zero means
unspecified (by this router). Used to
configure the amount of time that a remote
IPv6 node is considered reachable after
some reachability confirmation event has
occured.
REFERENCE RFC2461 Section 6.2.1ro INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.6 |
rcIpv6RouterAdvertRetransmitTimerThe value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero means
unspecified (by this router). Used to
configure the amount of time that router
should wait for the transmit to occur.
REFERENCE RFC2461 Section 6.2.1ro INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.7 |
rcIpv6RouterAdvertDefaultLifeTimeThe value to be placed in the router lifetime field of
router advertisements sent from this interface. This value
MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and
9000 seconds.
A value of zero indicates that the router is not to be used
as a default router.
The default is 3 * rcIpv6RouterAdvertMaxInterval.
REFERENCE RFC2461 Section 6.2.1rw INTEGER (0|4..9000) .1.3.6.1.4.1.2272.1.62.1.1.5.1.8 |
rcIpv6RouterAdvertCurHopLimitThe default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.
A value of zero in the router advertisement indicates that
the advertisement isn't specifying a value for curHopLimit.
The default should be set to the value specified in the IANA
web pages (www.iana.org) at the time of implementation.
REFERENCE RFC2461 Section 6.2.1rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.9 |
rcIpv6RouterAdvertManagedFlagif true then the M-bit(Managed address
configureation) in the router
adverisement will be set.
REFERENCE RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.10 |
rcIpv6RouterAdvertOtherConfigFlagif true then the O-bit (Other stateful
Configuration) in the router
adverisement will be set. REFERENCE
RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.11 |
rcIpv6RouterAdvertDadNsNumThe number of neighbor solicitation
messages for DAD (Duplicate address
detection). A value 0 is used to disable
DAD process on this interface. A value 1
is used to send one advertisment without
any retransmissions.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.12 |
rcIpv6RouterAdvertLinkMTUThe value to be placed in MTU options sent by the
router on this interface. A value of zero
indicates that no MTU options are sent. REFERENCE
RFC2461 Section 6.2.1ro Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.5.1.13 |
rcIpv6StaticRouteTableThis table contains list of routes that are
created by the user to destination networks. SEQUENCE OF RcIpv6StaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.6 |
rcIpv6StaticRouteEntryAn entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or both to reach the destination.
However if the nexthop Ipv6 address is a link-local
address then IfIndex must be supplied. RcIpv6StaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.6.1 |
rcIpv6StaticRouteDestThe destination IPv6 address of this route.
The values for the index objects rcIpv6StaticRouteDest and
rcIpv6StaticRoutePrefixLength must be consistent. When
the value of rcIpv6StaticRouteDest (excluding the zone
index, if one is present) is x, then the bitwise
logical-AND of x with the value of the mask formed from
the corresponding index object
rcIpv6StaticRoutePrefixLength MUST be equal to x. If
not, then the index pair is not consistent and an
inconsistentName error must be returned on SET or
CREATE requests. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.1 |
rcIpv6StaticRoutePrefixLengthIndicates the number of leading one bits which
form the mask to be logical-ANDed with the destination
address before being compared to the value in the
rcIpv6StaticRouteDestAddr field. INTEGER .1.3.6.1.4.1.2272.1.62.1.1.6.1.2 |
rcIpv6StaticRouteNextHopNext hop IPv6 address for this destination.
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.3 |
rcIpv6StaticRouteIfIndexThe ifIndex value which identifies the local
interface through which the next hop of this route
should be reached. A value of 0 is valid and
represents the scenario where no interface is specified. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.6.1.4 |
rcIpv6StaticRouteDistancecost/distance to reach the destination for this
node.rw INTEGER (1..65535 ) .1.3.6.1.4.1.2272.1.62.1.1.6.1.5 |
rcIpv6StaticRouteStatusUsed to indicate the current status of entry in routing table.
1. notReachable means the route is unreachable via
the specified next hop.
2. tryToResolve means the route's nexthop address
requires resolution by sending neighbour solicit message.
3. reachableNotInRtm means the route is reachable via the
specified next hop. It's the alternative route.
4. reachableInRtm means the route is reachable via the specified
next hop and best route.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.6.1.6 |
rcIpv6StaticRoutePreferenceUsed to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The higher the number,
the higher the preference.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.6.1.7 |
rcIpv6StaticRouteEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.8 |
rcIpv6StaticRouteRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.9 |
rcIpv6NetToPhysicalTableThe IP Address Translation table used for mapping from IP
addresses to physical addresses.
The Address Translation tables contain the IP address to
'physical' address equivalences. Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
While many protocols may be used to populate this table, ARP
[10] and Neighbor Discovery [4] are the most likely
options. SEQUENCE OF RcIpv6NetToPhysicalEntry .1.3.6.1.4.1.2272.1.62.1.1.7 |
rcIpv6NetToPhysicalEntryEach entry contains one IP address to `physical' address
equivalence. RcIpv6NetToPhysicalEntry .1.3.6.1.4.1.2272.1.62.1.1.7.1 |
rcIpv6NetToPhysicalIfIndexThe index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfIndex field in the
rcIpv6InterfaceIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.62.1.1.7.1.1 |
rcIpv6NetToPhysicalNetAddressThe IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.
Implementors need to be aware that if the size of
rcIpv6NetToPhysicalNetAddress exceeds 115 octets then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c
or SNMPv3. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.2 |
rcIpv6NetToPhysicalPhysAddressThe media-dependent `physical' address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change to non-volatile storage. In the ethernet case
it is a MAC address.rw PhysAddress .1.3.6.1.4.1.2272.1.62.1.1.7.1.3 |
rcIpv6NetToPhysicalInterfaceThe field represents either a physical port id or the MLT
port id. This entry is associated either with
a port or with a MLT in a VLAN/Brouter port. If the value is
0 then the interface is CP port.rw Integer32 .1.3.6.1.4.1.2272.1.62.1.1.7.1.4 |
rcIpv6NetToPhysicalLastUpdatedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.5 |
rcIpv6NetToPhysicalTypeThe type of mapping.
The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol.
The 'static(3)' type indicates that the mapping has been
statically configured. Both of these refer to entries that
provide mappings for other entities addresses.
The 'local(4)' type indicates that the mapping is provided
for an entity's own interface address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change to non-volatile storage.rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.7.1.6 |
rcIpv6NetToPhysicalStateThe Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4), this object is always unknown(6).
REFERENCE RFC2461ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.7.1.8 |
rcIpv6NetToPhysicalRowStatusThe status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rcIpv6NetToPhysicalPhysAddress object has been set.
Note that if the rcIpv6NetToPhysicalType is set to
'invalid' the
managed node may delete the entry independent of the state
of this object. Only createandGo and Delete operations are
supportedrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.9 |
rcIpv6PrefixListTableIPv6 Prefix List table SEQUENCE OF RcIpv6PrefixListEntry .1.3.6.1.4.1.2272.1.62.1.1.8 |
rcIpv6PrefixListEntryAn entry of Ipv6 Prefix List Table. RcIpv6PrefixListEntry .1.3.6.1.4.1.2272.1.62.1.1.8.1 |
rcIpv6PrefixListIdId of an IPv6 Prefix List Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.1 |
rcIpv6PrefixListPrefixIs a member of a specific ipv6 prefix list.
Adding the prefix to the given ipv6 prefix list Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.8.1.2 |
rcIpv6PrefixListPrefixMaskLenMask length of the ipv6 prefix added to the prefix list Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.3 |
rcIpv6PrefixListMaskLenFromLower bound of mask length of the ipv6 prefix added
to the prefix listrw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.4 |
rcIpv6PrefixListMaskLenUptoHigher bound of mask length of the ipv6 prefix added
to the prefix listrw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.5 |
rcIpv6PrefixListNameName of the Ipv6 prefix listrw SnmpAdminString .1.3.6.1.4.1.2272.1.62.1.1.8.1.6 |
rcIpv6PrefixListRowStatusUsed to create/delete entries in the ipv6 prefix list tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.8.1.7 |
rcIpv6ConfDhcpRelayTableDHCP Relay for Ipv6 configuration table SEQUENCE OF RcIpv6ConfDhcpRelayEntry .1.3.6.1.4.1.2272.1.62.1.1.9 |
rcIpv6ConfDhcpRelayEntryUsed to configure DHCP on a particular L3 interface. An
entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpv6InterfaceDhcpEnabled is automatically
reset to the FALSE setting. RcIpv6ConfDhcpRelayEntry .1.3.6.1.4.1.2272.1.62.1.1.9.1 |
rcIpv6ConfDhcpIfIndexInterface number. The number can represent either
a physical or logical(VLAN) interface. Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.9.1.1 |
rcIpv6ConfDhcpMaxHopUsed to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.2 |
rcIpv6ConfDhcpRemoteIdEnabledUsed to indicate if remote-id option is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.9.1.3 |
rcIpv6ConfDhcpNumRequestsThe total number of DHCP requests seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.4 |
rcIpv6ConfDhcpNumRepliesThe total number of DHCP replies seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.5 |
rcIpv6ConfDhcpRowStatusAn entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)', In
which case, the rcIpv6InterfaceDhcpEnabled is automatically
reset to the FALSE setting.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.9.1.6 |
rcIpv6DhcpForwardTableDHCP Relay forwarding table. SEQUENCE OF RcIpv6DhcpForwardEntry .1.3.6.1.4.1.2272.1.62.1.1.10 |
rcIpv6DhcpForwardEntryAn entry used represents a DHCP Relayed message forwarding directive. RcIpv6DhcpForwardEntry .1.3.6.1.4.1.2272.1.62.1.1.10.1 |
rcIpv6DhcpForwardAgentAddrThe IP address configured on an interface
(i.e., a locally configured IP address). Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.1 |
rcIpv6DhcpForwardServerAddrThe IP address of the DHCP server. If this
IP address corresponds to a local interface address, the DHCP packet is multicast out
the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast to the remote device. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.2 |
rcIpv6DhcpForwardEnabledUsed to indicate whether the entry should be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.3 |
rcIpv6DhcpForwardRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.4 |
rcIpv6RadiusServTableThe RADIUS table (0 to 10 entries). This
table lists the information of the RADIUS server. SEQUENCE OF RcIpv6RadiusServEntry .1.3.6.1.4.1.2272.1.62.1.1.11 |
rcIpv6RadiusServEntryA RADIUS server table entry. RcIpv6RadiusServEntry .1.3.6.1.4.1.2272.1.62.1.1.11.1 |
rcIpv6RadiusServAddressServer IP address of the RADIUS authentication server
referred to in this table entry. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.1 |
rcIpv6RadiusServUsedBycli(1): for cli login, igap(2): for igap,snmp(3):
for snmp login, eap(4) for EAP PAE Authenticator. Enumeration .1.3.6.1.4.1.2272.1.62.1.1.11.1.2 |
rcIpv6RadiusServPriorityServer priority, used to control which server to choose
first to send authentication.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.3 |
rcIpv6RadiusServTimeOutThe time interval in seconds before the client
retransmit the packet.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.4 |
rcIpv6RadiusServEnableEnable or disable this server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.5 |
rcIpv6RadiusServMaxRetriesMaximum number of retransmissions.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.6 |
rcIpv6RadiusServUdpPortThe UDP port the client is using to send requests
to this server.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.7 |
rcIpv6RadiusServSecretKeyThe identifier of the RADIUS authentication client.rw SnmpAdminString .1.3.6.1.4.1.2272.1.62.1.1.11.1.8 |
rcIpv6RadiusServAccessRequestsThe number of RADIUS access-response packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.9 |
rcIpv6RadiusServAccessAcceptsThe number of RADIUS access-accept packets (valid or
invalid) received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.10 |
rcIpv6RadiusServAccessRejectsThe number of RADIUS access-reject packets (valid or
invalid) received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.11 |
rcIpv6RadiusServBadResponsesThe number of RADIUS invalid access-response packets
received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.12 |
rcIpv6RadiusServPendingRequestsThe number of RADIUS access-request packets destined
for this server that have not yet timed out or
received a response. This variable is incremented
when an access-request is sent and decremented due
to receipt of an access-accept, access-reject, a
timeout or retransmission.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.13 |
rcIpv6RadiusServClientRetriesThe number of authentication retransmission to
this server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.14 |
rcIpv6RadiusServAcctEnableEnable or disable Radius Accounting on this server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.15 |
rcIpv6RadiusServAcctUdpPortThe UDP port the client used to send accounting
requests to this server.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.16 |
rcIpv6RadiusServAcctOnRequestsThe number of RADIUS accounting-on packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.17 |
rcIpv6RadiusServAcctOffRequestsThe number of RADIUS accounting-off packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.18 |
rcIpv6RadiusServAcctStartRequestsThe number of RADIUS accounting-start packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.19 |
rcIpv6RadiusServAcctStopRequestsThe number of RADIUS accounting-stop packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.20 |
rcIpv6RadiusServAcctInterimRequestsThe number of RADIUS accounting-interim packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.21 |
rcIpv6RadiusServAcctBadResponsesThe number of Invalid responses received from this
server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.22 |
rcIpv6RadiusServAcctPendingRequestsThe number of RADIUS accounting packets that are waiting
be sent to this server. This variable is incremented
whenever any accounting-request is sent to this server and
decremented when an acknowledgement is received or timeout
occurs.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.23 |
rcIpv6RadiusServAcctClientRetriesThe number of RADIUS accounting packets retransmitted
to this server.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.24 |
rcIpv6RadiusServNasIpAddressRADIUS Client NAS Identifier for this server.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.25 |
rcIpv6RadiusServRoundTripTimeTime different between the instance when
a RADIUS request is sent and the
corresponding response is received.ro SnmpAdminString .1.3.6.1.4.1.2272.1.62.1.1.11.1.26 |
rcIpv6RadiusServAccessChallangesThe number of RADIUS access-challanges packets
sent to this server. This does not include
retransmission.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.11.1.27 |
rcIpv6RadiusServSourceIpAddrsource IP address RADIUS packets.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.28 |
rcIpv6RadiusServRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.11.1.29 |