RC-IPFIX-MIB
Enterprise MIB for the rcIpfix
Main OID:
rcIpfixMib.1.3.6.1.4.1.2272.1.66.1
53
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
rcIpfixMibEnterprise MIB for the rcIpfix MODULE-IDENTITY .1.3.6.1.4.1.2272.1.66.1 |
rcIpfixConfGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66.1.1 |
rcIpfixConfStateEnables/Disables the state of ipfix on the box.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.66.1.1.1 |
rcIpfixRunningStateShow Enable/Disable running state of ipfix on the box.ro EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.66.1.1.2 |
rcIpfixTable OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66.1.2 |
rcIpfixConfSlotTableA table to store the configuration details for IPFIX for each
slot. This table is indexed by slot number. SEQUENCE OF RcIpfixConfSlotEntry .1.3.6.1.4.1.2272.1.66.1.2.1 |
rcIpfixConfSlotEntryOne Entry holding IPFIX config information on slot basis. RcIpfixConfSlotEntry .1.3.6.1.4.1.2272.1.66.1.2.1.1 |
rcIpfixConfSlotNumSlot number Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.1 |
rcIpfixConfSlotAgingIntvFlow record aging interval (Value in seconds).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.2 |
rcIpfixConfSlotActiveTimeoutFlow record active timeout value (Value in mins).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.3 |
rcIpfixConfSlotExportIntvFrequency of flow export to collector (Value in sec).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.4 |
rcIpfixConfSlotExportStateState of exporter.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.66.1.2.1.1.5 |
rcIpfixConfSlotTempRefIntvSecTemplate refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.6 |
rcIpfixConfSlotTempRefIntvPktsTemplate refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.7 |
rcIpfixCollectorTableTable to store the configuration details for IPFIX collector
for each slot. This table is indexed by slot number and ip
address. SEQUENCE OF RcIpfixCollectorEntry .1.3.6.1.4.1.2272.1.66.1.2.2 |
rcIpfixCollectorEntryOne entry holds IPFIX collector config information based on
slot info and collector ip address. RcIpfixCollectorEntry .1.3.6.1.4.1.2272.1.66.1.2.2.1 |
rcIpfixCollectorSlotNumSlot number. An index to the CollectorEntry. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.2.1.1 |
rcIpfixCollectorAddressTypeIP address type of the collector. An index to the
CollectorEntry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.2 |
rcIpfixCollectorAddressIP address of the collector. An index to the CollectorEntry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.3 |
rcIpfixCollectorProtocolProtocol for export data from exporter to collector .rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.2.1.4 |
rcIpfixCollectorDestPortDest port to send the requests.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.5 |
rcIpfixCollectorExporterIpTypeIp address type of the exporter for collector.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.6 |
rcIpfixCollectorExporterIpIp address of the exporter for collector.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.7 |
rcIpfixCollectorProtoVerThis specifies the protocol version for ipfix.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.2.1.8 |
rcIpfixCollectorStateState of the particular collector. Enable is true by
default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.2.1.9 |
rcIpfixCollectorRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.2.1.10 |
rcIpfixConfPortTableA table to store the configuration details for IPFIX for each
port. This table is indexed by port number. SEQUENCE OF RcIpfixConfPortEntry .1.3.6.1.4.1.2272.1.66.1.2.3 |
rcIpfixConfPortEntryEntry holding IPFIX config information per port. RcIpfixConfPortEntry .1.3.6.1.4.1.2272.1.66.1.2.3.1 |
rcIpfixConfPortIdAn index to the IpfixConfPortEntry, a unique identifier of
the portId InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.66.1.2.3.1.1 |
rcIpfixConfPortSampleRateUsed to configure the sampling rate. Sample one in every N
packets.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.3.1.2 |
rcIpfixConfPortHashPolyCoeffsCommand to set hash polynomial coeffs.rw Integer32 ('000401'h..'FFFFFF'h) .1.3.6.1.4.1.2272.1.66.1.2.3.1.3 |
rcIpfixConfPortHashPolySeedCommand to set hash polynomial seed.rw Integer32 ('000000'h..'FFFFFF'h) .1.3.6.1.4.1.2272.1.66.1.2.3.1.4 |
rcIpfixConfPortFlushThis is used to delete all records stored in COP, or to
initiate an export of all records and delete data base after
the export is finished.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.3.1.5 |
rcIpfixConfPortAllTrafficThis is used to enable/disable ipfix on all trafiic, for the
specified port.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.66.1.2.3.1.6 |
rcIpfixConfPortHashKeyIdhash key id.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.3.1.7 |
rcIpfixConfPortDynamicSampRateIndicates the dynamic sampling rate.ro Integer32 .1.3.6.1.4.1.2272.1.66.1.2.3.1.8 |
rcIpfixHashStatsTableA table of hash Statistics entries to store the statistics
for each slot. This table is indexed by the slot number. SEQUENCE OF RcIpfixHashStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.4 |
rcIpfixHashStatsEntryEntry containing hash statistics information for a particular
slot. RcIpfixHashStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.4.1 |
rcIpfixHashStatsSlotNumA unique identifier for the table. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.4.1.1 |
rcIpfixHashStatsHashOverflowsCount of hash overflows per slot.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.4.1.2 |
rcIpfixHashStatsHashDropsCount of hash drops per slot.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.4.1.3 |
rcIpfixHashStatsClearSetting this object will clear hash statistics for a slot.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.4.1.4 |
rcIpfixHashStatsClearTimeThe value of sysUpTime when the hash statistics were last
cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.4.1.5 |
rcIpfixExporterStatsTableA table of Exporter Statistics entries to store the statistics
for each slot, each collector. This table is indexed by the
slot number and collector address. SEQUENCE OF RcIpfixExporterStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.5 |
rcIpfixExporterStatsEntryEntry containing Exporter statistics information for a
particular slot and particular collector. RcIpfixExporterStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.5.1 |
rcIpfixExporterStatsSlotNumIndex for the table, slot number. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.5.1.1 |
rcIpfixExporterStatsCollectorTypeCollector IP address type. This is an index for the table. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.5.1.2 |
rcIpfixExporterStatsCollectorIndex for the table, collector address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.5.1.3 |
rcIpfixExporterStatsOutPktsNumber of Packets sent.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.4 |
rcIpfixExporterStatsOutOctetsNumber of Bytes sent.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.5 |
rcIpfixExporterStatsPktsLossNumber of Records lost.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.6 |
rcIpfixExporterStatsClearSetting this object will clear exporter statistics.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.5.1.7 |
rcIpfixExporterStatsClearTimeThe value of sysUpTime when exporter statistics were last
cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.5.1.8 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →RAPID-CITY
The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
6502 objects→
RAPID-CITY-VSP
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
5404 objects→
RC-CFM-MIB
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
572 objects→
SWL2MGMT-MIB
SNMP MIB module
286 objects→
RC-IP-POLICY-MIB
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
220 objects→
RC-2K-MIB
SNMP MIB module
218 objects→