RC-DIAG-MIB
AI MIB Summary
The RC-DIAG-MIB provides enterprise-specific monitoring for the Accelar product family, enabling the tracking of remote connectivity diagnostics, link quality metrics, and session status for network acceleration appliances. This module facilitates the collection of performance counters and fault indicators essential for troubleshooting WAN optimization and traffic management operations.
Enterprise MIB for the Accelar product family.
Main OID:
rcDiagMib.1.3.6.1.4.1.2272.1.23.0
146
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
146 total| Object Name |
|---|
rcMirrorSaveConfigControl whether Mirror configuration information
should be saved to NVRAM so mirror settings can
be automatically reinstalled after a system
reboot.
Setting rcMirrorSaveConfig to true does not
immediately save the configuration information.
The save happens when the rcSysAction variable
is set to 'saveToNVRAM(4)'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.5.1 |
rcMirrorByPort OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.5.2 |
rcMirrorByPortEnableUsed to indicate whether the mirror by port
feature is active. The system can only support
mirroring on two ports. When this feature is
active, all packets received on the port(s)
specified by rcMirrorSrcPortOne and/or
rcMirrorSrcPortTwo are copied to rcMirrorDstPort.
The mirroring operation is non-intrusive.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.5.2.1 |
rcMirrorByPortMirrorPortThe ifIndex of the port to forward mirrored frames to.rwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.5.2.2 |
rcMirrorByPortEnableMirroredPortOneUsed to indicate whether the port specified in
rcMirrorByPortMirroredPortOne should be mirrored.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.5.2.3 |
rcMirrorByPortMirroredPortOneThe ifIndex of the port to be mirrored. That
is, traffic received on this port will be sent
to the mirror port.rwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.5.2.4 |
rcMirrorByPortEnableMirroredPortTwoUsed to indicate whether the port specified in
rcMirrorByPortMirroredPortTwo should be mirrored.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.5.2.5 |
rcMirrorByPortMirroredPortTwoThe ifIndex of the port to be mirrored. That
is, traffic received on this port will be sent
to the mirror port.rwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.5.2.6 |
rcDiagMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.23.0 |
rcDiagMirrorByPortTableThis table is used to configure the Mirror By
Port feature. This feature allows the device
to forward a copy of each packet seen on a
particular port to a different port. SEQUENCE OF RcDiagMirrorByPortEntry .1.3.6.1.4.1.2272.1.23.1 |
rcDiagMirrorByPortEntryEntry containing mirror by port information. RcDiagMirrorByPortEntry .1.3.6.1.4.1.2272.1.23.1.1 |
rcDiagMirrorByPortIdEntry id.ro INTEGER .1.3.6.1.4.1.2272.1.23.1.1.1 |
rcDiagMirrorByPortMirroredPortUsed to configure the 'mirrored' port. The port
where packets are copied from.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.23.1.1.2 |
rcDiagMirrorByPortMirroringPortUsed to configure the 'mirroring' port. The port
where packets are copied to.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.23.1.1.3 |
rcDiagMirrorByPortModeUsed to configure the 'mode' of the mirror operation.
'tx' means packets being transmitted on the 'mirrored'
port will be copied. 'rx' means packets received on
the 'mirrored' port will be copied. 'both' means
all traffic on the 'mirrored' port will be copied.
'rxFilter' means packets received on the 'mirrored'
port is copied only if it macthes filter criteria.
'txFilter' means packets being transmitted on the
'mirrorred' port is copied only if it matches filter
criteria. 'bothFilter' means both ingress and egress
traffic will be copied if it matches either ingress or
egress filter on the 'mirrored' port.rw Enumeration .1.3.6.1.4.1.2272.1.23.1.1.4 |
rcDiagMirrorByPortEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.1.1.5 |
rcDiagMirrorByPortRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.1.1.6 |
rcDiagMirrorByPortOctapidIdOctapid Id for a port.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.23.1.1.7 |
rcDiagMirrorByPortPidPid for a port.ro Integer32 .1.3.6.1.4.1.2272.1.23.1.1.8 |
rcDiagMirrorRemoteMirrorVlanIdvlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packetrw INTEGER .1.3.6.1.4.1.2272.1.23.1.1.9 |
rcDiagPortConvSteeringTableDiag Port Conv Steering Table SEQUENCE OF RcDiagPortConvSteeringEntry .1.3.6.1.4.1.2272.1.23.2 |
rcDiagPortConvSteeringEntryEntry containing infomation of Diag Port Conv Steering. RcDiagPortConvSteeringEntry .1.3.6.1.4.1.2272.1.23.2.1 |
rcDiagPortConvSteeringIdEntry id.ro Integer32 .1.3.6.1.4.1.2272.1.23.2.1.1 |
rcDiagPortConvSteeringPortOneIfIndex for port onerw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.2 |
rcDiagPortConvSteeringPortTwoIfIndex for port tworw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.3 |
rcDiagPortConvSteeringModeUsed to specify the traffic flow that should be
captured between ports one and two.rw Enumeration .1.3.6.1.4.1.2272.1.23.2.1.4 |
rcDiagPortConvSteeringForwardPortIfIndex of the port where captured traffic should
be forwarded to.rw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.5 |
rcDiagPortConvSteeringEnableEnable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.2.1.6 |
rcDiagPortConvSteeringRowStatusUsed to create/delete entries in the rcDiagMirrorByPortTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.2.1.7 |
rcDiagMacConvSteeringTableDiag Mac Conv Steering Table SEQUENCE OF RcDiagMacConvSteeringEntry .1.3.6.1.4.1.2272.1.23.3 |
rcDiagMacConvSteeringEntryEntry containing infomation of Diag Mac Conv Steering. RcDiagMacConvSteeringEntry .1.3.6.1.4.1.2272.1.23.3.1 |
rcDiagMacConvSteeringIdEntry id.ro Integer32 .1.3.6.1.4.1.2272.1.23.3.1.1 |
rcDiagMacConvSteeringSrcMacSource MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.2 |
rcDiagMacConvSteeringDstMacDestination MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.3 |
rcDiagMacConvSteeringInPortIfIndex of ingress port.rw Integer32 .1.3.6.1.4.1.2272.1.23.3.1.4 |
rcDiagMacConvSteeringForwardPortIfIndex of the port where captured traffic should
be forwarded to.rw Integer32 .1.3.6.1.4.1.2272.1.23.3.1.5 |
rcDiagMacConvSteeringEnableEnable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.6 |
rcDiagMacConvSteeringRowStatusUsed to create/delete entries in the rcDiagMirrorByPortTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.7 |
rcDiagVctTableDiag Vct Table SEQUENCE OF RcDiagVctEntry .1.3.6.1.4.1.2272.1.23.4 |
rcDiagVctEntryEntry containing cable infomation and test result. RcDiagVctEntry .1.3.6.1.4.1.2272.1.23.4.1 |
rcDiagVctIfIndexPort IfIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.23.4.1.1 |
rcDiagVctNormalCableLengthCable length, this indicates a range in which the
actual length falls.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.2 |
rcDiagVctPhyTypePhy type, 100MHz throught 1 GHz, or broadcom phy.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.3 |
rcDiagVctCableStatusStatus of the cable as a whole. The status of a
cable is in a sense, a summation of the status of its
pairs. If all the pairs are normal, then the cable is
normal. If the cable consists of zero or more normal
pairs and one or more open pairs, then the cable is
considered open. If it consists of shorted pairs and
normal pairs, then the cable is considered shorted.
Any combination of open and shorted pairs is
considered simply FAILED.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.4 |
rcDiagVctPair1StatusThe status of a single pair in the cablero Enumeration .1.3.6.1.4.1.2272.1.23.4.1.5 |
rcDiagVctPair1ErrLengthError Pair Length, in meters, measured by Time
Domain Reflectometry.ro INTEGER .1.3.6.1.4.1.2272.1.23.4.1.6 |
rcDiagVctPair2StatusThe status of a single pair in the cablero Enumeration .1.3.6.1.4.1.2272.1.23.4.1.7 |
rcDiagVctPair2ErrLengthError Pair Length, in meters, measured by Time
Domain Reflectometry.ro INTEGER .1.3.6.1.4.1.2272.1.23.4.1.8 |
rcDiagVctPair3StatusThe status of a single pair in the cablero Enumeration .1.3.6.1.4.1.2272.1.23.4.1.9 |
rcDiagVctPair3ErrLengthError Pair Length, in meters, measured by Time
Domain Reflectometry.ro INTEGER .1.3.6.1.4.1.2272.1.23.4.1.10 |
rcDiagVctPair4StatusThe status of a single pair in the cablero Enumeration .1.3.6.1.4.1.2272.1.23.4.1.11 |
rcDiagVctPair4ErrLengthError Pair Length, in meters, measured by Time
Domain Reflectometry.ro INTEGER .1.3.6.1.4.1.2272.1.23.4.1.12 |
rcDiagVctStartTestStart VCT test, Set this object to TRUE to perform
a VCT test on the current port. A get on this
object produces an undefines value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.4.1.13 |
rcDiagVctTestDoneWhen a VCT test is started setting rcDiagVctStartTest,
this object is immediately set to FALSE by the switch
software. It remain FALSE until the test is completed,
when it is set to TRUE. When this object is TRUE,
then the management station can immediately perform
a GET on the test result for this port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.4.1.14 |
rcDiagVctCableCategoryCable type: CAT3 or CAT5.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.15 |
rcDiagVctCableLengthLength of cable in meters based on average electrical
length of 4 pairs. Measurement can be done when
traffic is live or not.ro Integer32 .1.3.6.1.4.1.2272.1.23.4.1.16 |
rcDiagVctPair1PolarityThe polarity of a single pair in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.17 |
rcDiagVctPair1SwapThe pair swap in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.18 |
rcDiagVctPair1SkewDifferential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.ro Integer32 (-1..15) .1.3.6.1.4.1.2272.1.23.4.1.19 |
rcDiagVctPair2PolarityThe polarity of a single pair in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.20 |
rcDiagVctPair2SwapThe pair swap in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.21 |
rcDiagVctPair2SkewDifferential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.ro Integer32 (-1..15) .1.3.6.1.4.1.2272.1.23.4.1.22 |
rcDiagVctPair3PolarityThe polarity of a single pair in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.23 |
rcDiagVctPair3SwapThe pair swap in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.24 |
rcDiagVctPair3SkewDifferential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.ro Integer32 (-1..15) .1.3.6.1.4.1.2272.1.23.4.1.25 |
rcDiagVctPair4PolarityThe polarity of a single pair in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.26 |
rcDiagVctPair4SwapThe pair swap in the cable.ro Enumeration .1.3.6.1.4.1.2272.1.23.4.1.27 |
rcDiagVctPair4SkewDifferential cable pair length in meters.
Skew measurement can only be performed when cable
gigabit link is up regardless of traffic activity.
A value of -1 means an error occured when trying
to get the length.ro Integer32 (-1..15) .1.3.6.1.4.1.2272.1.23.4.1.28 |
rcDiagSaveConfigUsed to configure whether the various mirror feature
settings should be saved and restored across system
reboot.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.10 |
rcDiagMirrorByPortTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.11 |
rcDiagPortConvSteeringTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.12 |
rcDiagMacConvSteeringTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.13 |
rcDiagDiagnosticsEnableUsed to enable/disable the mirroring feature
for the entire device. This setting overrides
any setting in the various mirroring tables.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.14 |
rcDiagPcap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.23.15 |
rcDiagPcapEnableTo enable pcap in secondary CPUrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.1 |
rcDiagPcapBufferWrapTo enable buffer wrap-around when buffer is full.
If set, pcap will continue to capture pkts, otherwise
stops pkt storingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.2 |
rcDiagPcapPcmciaWrapTo wrap around the PCMCIA when saving data in PCMCIArw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.3 |
rcDiagPcapFrameSizeNumber of bytes of pkts needs to be storedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.4 |
rcDiagPcapBufferSizememory to be allocated for capturing the pktrw INTEGER .1.3.6.1.4.1.2272.1.23.15.5 |
rcDiagPcapAutoSaveTo save data automatically when buffer is fullrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.6 |
rcDiagPcapAutoSaveFileNameName of the file in which the pkt is to be storedrw DisplayString .1.3.6.1.4.1.2272.1.23.15.7 |
rcDiagPcapAutoSaveDeviceWhere to store the captured pkts. If the option is
network, the user need to enter an IP address alsorw Enumeration .1.3.6.1.4.1.2272.1.23.15.8 |
rcDiagPcapAutoSaveNetworkIpAddressip address of the remote host where the data
needs to be stored. This field is valid only
if the device is networkrw IpAddress .1.3.6.1.4.1.2272.1.23.15.9 |
rcDiagPcapFilterTableSizeUsed to indicate the number of entries in the
Filter tablero Integer32 .1.3.6.1.4.1.2272.1.23.15.10 |
rcDiagPcapFilterTableA table used to store pcap secondary filters SEQUENCE OF RcDiagPcapFilterEntry .1.3.6.1.4.1.2272.1.23.15.11 |
rcDiagPcapFilterEntryPcap secondary filter desc RcDiagPcapFilterEntry .1.3.6.1.4.1.2272.1.23.15.11.1 |
rcDiagPcapFilterIdUnique ID that represents the filterro INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.1 |
rcDiagPcapFilterEnableFilter is enabled or notrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.23.15.11.1.2 |
rcDiagPcapFilterActionAction to be takesn when policy is matchedrw Enumeration .1.3.6.1.4.1.2272.1.23.15.11.1.3 |
rcDiagPcapFilterSrcMacSoruce mac address to matchrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.4 |
rcDiagPcapFilterSrcMaskSoruce mac address mask. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.5 |
rcDiagPcapFilterIsInverseSrcMacSoruce mac address Inverse. when set the mac
addresses otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.6 |
rcDiagPcapFilterDstMacDestination mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.7 |
rcDiagPcapFilterDstMaskDestination mac address mask. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.8 |
rcDiagPcapFilterIsInverseDstMacDestination mac address Inverse. when set the mac
addresses otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.9 |
rcDiagPcapFilterVlanIdVlan-id of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.10 |
rcDiagPcapFilterToVlanIdTo Vlan-id. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.11 |
rcDiagPcapFilterIsInverseVlanIdVlan-Id Inverse. when set the Vlan-Id
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.12 |
rcDiagPcapFilterPbitpBit of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.13 |
rcDiagPcapFilterToPbitTo pBit. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.14 |
rcDiagPcapFilterIsInversePbitpBit Inverse. when set the pBit
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.15 |
rcDiagPcapFilterEtherTypeEtherType of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.16 |
rcDiagPcapFilterToEtherTypeTo EtherType. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.17 |
rcDiagPcapFilterIsInverseEtherTypeEtherType Inverse. when set the EtherType
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.18 |
rcDiagPcapFilterProtocolTypeProtocolType of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.19 |
rcDiagPcapFilterToProtocolTypeTo ProtocolType. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.20 |
rcDiagPcapFilterIsInverseProtocolTypeProtocolType Inverse. when set the ProtocolType
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.21 |
rcDiagPcapFilterSrcIpSource IP address of the packet to be matchedrw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.22 |
rcDiagPcapFilterToSrcIpTo Source IP address. Used to specify a rangerw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.23 |
rcDiagPcapFilterIsInverseSrcIpSource IP address Inverse. when set the source IP
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.24 |
rcDiagPcapFilterDstIpDestination IP address of the packet to be matchedrw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.25 |
rcDiagPcapFilterToDstIpTo Destination IP address. Used to specify a rangerw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.26 |
rcDiagPcapFilterIsInverseDstIpDestination IP address Inverse. when set the
Destination IP other than specified is range
matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.27 |
rcDiagPcapFilterDscpDSCP value of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.28 |
rcDiagPcapFilterToDscpTo DSCP. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.29 |
rcDiagPcapFilterIsInverseDscpDSCP Inverse. when set the DSCP
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.30 |
rcDiagPcapFilterRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.31 |
rcDiagPcapFilterDscpMatchZeroWhen this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSErw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.32 |
rcDiagPcapFilterPbitMatchZeroWhen this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSErw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.33 |
rcDiagPcapAdvancedFilterTableSizeUsed to indicate the number of entries in the
Filter table advanced parameterro Integer32 .1.3.6.1.4.1.2272.1.23.15.12 |
rcDiagPcapAdvancedFilterTableA table used to store pcap secondary filters SEQUENCE OF RcDiagPcapAdvancedFilterEntry .1.3.6.1.4.1.2272.1.23.15.13 |
rcDiagPcapAdvancedFilterEntryPcap secondary Advanced filter desc RcDiagPcapAdvancedFilterEntry .1.3.6.1.4.1.2272.1.23.15.13.1 |
rcDiagPcapAdvancedFilterIdUnique ID that represents the filterro INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.1 |
rcDiagPcapAdvancedFilterUdpPortUdpPort of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.2 |
rcDiagPcapAdvancedFilterToUdpPortTo UdpPort. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.3 |
rcDiagPcapAdvancedFilterIsInverseUdpPortUdpPort Inverse. when set the UdpPort
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.4 |
rcDiagPcapAdvancedFilterTcpPortTcpPort of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.5 |
rcDiagPcapAdvancedFilterToTcpPortTo TcpPort. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.6 |
rcDiagPcapAdvancedFilterIsInverseTcpPortTcpPort Inverse. when set the TcpPort
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.7 |
rcDiagPcapAdvancedFilterUserDefinedDataUser defined data to match with the packets receivedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.8 |
rcDiagPcapAdvancedFilterUserDefinedDataSizeLength of user defined datarw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.9 |
rcDiagPcapAdvancedFilterUserDefinedOffsetOffset from which match has to startrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.10 |
rcDiagPcapAdvancedFilterIsInverseUserDefinedTcpPort Inverse. when set the Userdata
otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.11 |
rcDiagPcapAdvancedFilterTimerTimer to start the pcap capture window in msrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.12 |
rcDiagPcapAdvancedFilterPacketCountNumber of packets to be captured before disabling pcaprw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.13 |
rcDiagPcapAdvancedFilterRefreshTimerRefresh timer in msrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.14 |
rcDiagPcapAdvancedFilterRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.15 |
rcDiagPcapCopyFileNameUsed to indicate the file name. When set, the PCAP
data from PCAP engine RAM is stored into this file
in PCAP enginerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.14 |
rcDiagPcapResetStatTo Reset PCAP statisticsrw Enumeration .1.3.6.1.4.1.2272.1.23.15.15 |
rcDiagPcapStatPacketCapacityCountPacket Capacity Countro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.16 |
rcDiagPcapStatNumberOfPacketsReceivedNumber of packets received in PCAP enginero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.17 |
rcDiagPcapStatNumberOfPacketsAccumulatedNumber of packets captured in PCAP enginero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.18 |
rcDiagPcapStatNumberOfPacketsDroppedInPcapEngineNumber of packets dropped in PCAP engine by filtersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.19 |
rcDiagPcapStatNumberOfPacketsDroppedInHardwareNumber of packets dropped in Hardwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.20 |
rcDiagPcapDataValidA true/false value that indicate the return
data whether is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.21 |
rcDiagPcapEtherTypeForSvlanLevelEtherType of svlan level.rw INTEGER ('05dd'h..'ffff'h) .1.3.6.1.4.1.2272.1.23.15.22 |