RADLAN-rlMacMulticast-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for RADLAN-rlMacMulticast-MIB.
125
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
rlMacMulticastUnregFilterFailedWarning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number. TRAP-TYPE .1.3.6.1.4.1.89.0.1 |
rlIgmpMldSnoopTriplePlayPortInformational trap indicating that a query was recieved on a triple play port. NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.208 |
rlbrgIgmpSnoopQrrDuplicateIPWarning trap indicating that duplicate ip\ipv6 address
occured between two queries NOTIFICATION-TYPE .1.3.6.1.4.1.89.0.227 |
rlMacMulticastEnableEnable/Disable MAC Multicast bridging in the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.1 |
rlIgmpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.89.55.2 |
rlIgmpSnoopMibVersionMIB's version, the current version is 3.
IGMP Snooping supports IGMPv3.ro INTEGER .1.3.6.1.4.1.89.55.2.1 |
rlIgmpSnoopEnableEnable/Disable IGMP Snooping in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.2 |
rlIgmpSnoopHostAgingTimeThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopGroupTable will be aged out.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.3 |
rlIgmpSnoopRouterAgingTimeThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopInterfaceTable will be aged out.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.4 |
rlIgmpSnoopVlanTableThe table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.obsolete SEQUENCE OF RlIgmpSnoopVlanEntry .1.3.6.1.4.1.89.55.2.7 |
rlIgmpSnoopVlanEntryAn entry (conceptual row) in the rlIgmpSnoopVlanTable.obsolete RlIgmpSnoopVlanEntry .1.3.6.1.4.1.89.55.2.7.1 |
rlIgmpSnoopVlanTagThe tag of the VLAN for which this entry contains
information for an IP Multicast Router.roobsolete INTEGER .1.3.6.1.4.1.89.55.2.7.1.1 |
rlIgmpSnoopVlanEnableEnable/Disable IGMP Snooping in the vlan.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.7.1.2 |
rlIgmpSnoopVlanRouterLearnEnable/Disable of Learning of routers in the vlan.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.7.1.3 |
rlIgmpSnoopVlanHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.7.1.4 |
rlIgmpSnoopVlanQuerierTimeOutThe amount of time where no query is heard until
querier is activatedrwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.7.1.5 |
rlIgmpSnoopVlanRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.7.1.6 |
rlIgmpSnoopVlanLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.2.7.1.7 |
rlIgmpSnoopVlanIgmpVersionThe current IGMP protocol version running on the VLAN.roobsolete IgmpVersion .1.3.6.1.4.1.89.55.2.7.1.8 |
rlIgmpSnoopVlanRouterPortlistList of router ports learned dynamically on this VLAN
from PIM, DVMRP, MRDISC and IGMP Query messagesroobsolete PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.7.1.9 |
rlIgmpSnoopIGMP224ReportsHandleThis varaiable indicates whether to allow IGMP reports for groups in the
224.0.0.X range when the group address is already manually configured or to ignore.rw Enumeration .1.3.6.1.4.1.89.55.2.8 |
rlIgmpSnoopMulticastTvTablemulticast vlan used for this port SEQUENCE OF RlIgmpSnoopMulticastTvEntry .1.3.6.1.4.1.89.55.2.10 |
rlIgmpSnoopMulticastTvEntryentry of multicast ip RlIgmpSnoopMulticastTvEntry .1.3.6.1.4.1.89.55.2.10.1 |
rlIgmpSnoopMulticastTvVIDSpecify the multicast ip to be used.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.10.1.1 |
rlIgmpSnoopMulticastTvGroupSpecify the multicast ip to be used.ro IpAddress .1.3.6.1.4.1.89.55.2.10.1.2 |
rlIgmpSnoopMulticastTvStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.10.1.3 |
rlIgmpSnoopMembershipTableThe table listing the IP multicast memberships. SEQUENCE OF RlIgmpSnoopMembershipEntry .1.3.6.1.4.1.89.55.2.11 |
rlIgmpSnoopMembershipEntryAn entry (conceptual row) in the rlIgmpSnoopMembershipTable. RlIgmpSnoopMembershipEntry .1.3.6.1.4.1.89.55.2.11.1 |
rlIgmpSnoopMembershipVlanTagThe VLAN tag for which this entry contains multicast membership information.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.11.1.1 |
rlIgmpSnoopMembershipGroupIpAddressThe multicast group address.ro IpAddress .1.3.6.1.4.1.89.55.2.11.1.2 |
rlIgmpSnoopMembershipSourceIpAddressThe unicast source address.ro IpAddress .1.3.6.1.4.1.89.55.2.11.1.3 |
rlIgmpSnoopMembershipIncPortlistIncluded ports, where a report message was heard for the group
(IGMP version 2|1) or group and source address (IGMP version 3).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.11.1.4 |
rlIgmpSnoopMembershipExcPortlistExcluded ports where an exclude report message
was heard for the group and source address (IGMP version 3).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.11.1.5 |
rlIgmpSnoopMembershipExpiryTimeTime till entry will expire.roobsolete INTEGER .1.3.6.1.4.1.89.55.2.11.1.6 |
rlIgmpSnoopMembershipCompatibilityModeIGMP group compatibility mode.ro IgmpVersion .1.3.6.1.4.1.89.55.2.11.1.7 |
rlIgmpSnoopQuerierVlanTableA table that contains IGMP Snooping Querier information about
every vlan. This is indexed by vlan tag. SEQUENCE OF RlIgmpSnoopQuerierVlanEntry .1.3.6.1.4.1.89.55.2.12 |
rlIgmpSnoopQuerierVlanEntryAn entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable. RlIgmpSnoopQuerierVlanEntry .1.3.6.1.4.1.89.55.2.12.1 |
rlIgmpSnoopQuerierVlanTagAn IGMP Snoop Querier entry vlan tag.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.2.12.1.1 |
rlIgmpSnoopQuerierAdminEnableThe desired administrative state of IGMP Snoop Querier on the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.12.1.2 |
rlIgmpSnoopQuerierOperEnableThe current operational state of IGMP Snoop Querier on the vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.12.1.3 |
rlIgmpSnoopQuerierAdminAddrThe desired IP address is being used in IGMP Snoop Querier messages on the vlan.rw IpAddress .1.3.6.1.4.1.89.55.2.12.1.4 |
rlIgmpSnoopQuerierOperAddrThe current operational IP address is being used in IGMP Snoop Querier messages on the vlan.ro IpAddress .1.3.6.1.4.1.89.55.2.12.1.5 |
rlIgmpSnoopQuerierAdminVersionNumberThe highest version number of IGMP Snoop Querier for the vlan.rw IgmpVersion .1.3.6.1.4.1.89.55.2.12.1.6 |
rlIgmpSnoopQuerierOperVersionNumberThe current operational version number of IGMP Snoop Querier for the vlan.ro IgmpVersion .1.3.6.1.4.1.89.55.2.12.1.7 |
rlIgmpSnoopQuerierElectionEnableWhether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another router on the vlan (always lose).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.12.1.8 |
rlIgmpSnoopQuerierEnableGlobally enable/disable IGMP Snooping Querier in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.2.13 |
rlMacMulticastMaxEntriesNumThe maximum number of Mac Multicast entries the device supports.ro INTEGER .1.3.6.1.4.1.89.55.3 |
rlMacMulticastFilter OBJECT IDENTIFIER .1.3.6.1.4.1.89.55.4 |
rlMacMulticastUnregFilterEnableEach bit represent a port whether Unregistered Multicast Filtering enablerw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.4.1 |
rlMldSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.89.55.5 |
rlMldSnoopEnableEnable/Disable Mld Snooping in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.1 |
rlMldSnoopHostAgingTimeThe amount of time that should pass before aging out
an entry in the rlMldSnoopGroupTable will be aged out.rwobsolete INTEGER (60 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.2 |
rlMldSnoopRouterAgingTimeThe amount of time that should pass before aging out
an entry in the rlMldSnoopInterfaceTable will be aged out.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.3 |
rlIgmpMldSnoopMembershipTableThe table listing the IP multicast memberships. SEQUENCE OF RlIgmpMldSnoopMembershipEntry .1.3.6.1.4.1.89.55.5.4 |
rlIgmpMldSnoopMembershipEntryAn entry (conceptual row) in the rlIgmpMldSnoopMembershipTable. RlIgmpMldSnoopMembershipEntry .1.3.6.1.4.1.89.55.5.4.1 |
rlIgmpMldSnoopMembershipVlanTagThe VLAN tag for which this entry contains multicast membership information.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.4.1.1 |
rlIgmpMldSnoopMembershipGroupIpAddressTypeInet type IPv4/IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.4.1.2 |
rlIgmpMldSnoopMembershipGroupIpAddressThe multicast group address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.4.1.3 |
rlIgmpMldSnoopMembershipSourceIpAddressTypeInet type IPv4/IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.4.1.4 |
rlIgmpMldSnoopMembershipSourceIpAddressThe unicast source address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.4.1.5 |
rlIgmpMldSnoopMembershipIncPortlistIncluded ports, where a report message was heard for the group
(IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.4.1.6 |
rlIgmpMldSnoopMembershipExcPortlistlist of excluded ports to which an exclude report message
was heard for the group and source address (IGMPv3/MLDv2 ).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.4.1.7 |
rlIgmpMldSnoopMembershipExpiryTimeTime till entry will expire.roobsolete INTEGER .1.3.6.1.4.1.89.55.5.4.1.8 |
rlIgmpMldSnoopMembershipCompatibilityModeIGMP/MLD group compatibility mode.ro IgmpVersion .1.3.6.1.4.1.89.55.5.4.1.9 |
rlIgmpMldSnoopVlanTableThe table lists the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports. SEQUENCE OF RlIgmpMldSnoopVlanEntry .1.3.6.1.4.1.89.55.5.5 |
rlIgmpMldSnoopVlanEntryAn entry (conceptual row) in the rlIgmpSnoopVlanTable. RlIgmpMldSnoopVlanEntry .1.3.6.1.4.1.89.55.5.5.1 |
rlIgmpMldSnoopVlanInetAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.5.1.1 |
rlIgmpMldSnoopVlanTagThe tag of the VLAN for which this entry contains
information for an IP Multicast Router.ro INTEGER .1.3.6.1.4.1.89.55.5.5.1.2 |
rlIgmpMldSnoopVlanEnableEnable/Disable IGMP Snooping in the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.5.1.3 |
rlIgmpMldSnoopVlanRouterLearnEnable/Disable of Learning of routers in the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.5.1.4 |
rlIgmpMldSnoopVlanHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.rwobsolete INTEGER (60 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.5.1.5 |
rlIgmpMldSnoopVlanQuerierTimeOutThe amount of time where no query is heard until
querier is activatedrwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.5.1.6 |
rlIgmpMldSnoopVlanRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.5.1.7 |
rlIgmpMldSnoopVlanLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.89.55.5.5.1.8 |
rlIgmpMldSnoopVlanIgmpVersionThe current IGMP protocol version running on the VLAN.ro IgmpVersion .1.3.6.1.4.1.89.55.5.5.1.9 |
rlIgmpMldSnoopVlanRouterPortlistList of router ports learned dynamically
from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLANro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.5.1.10 |
rlIgmpMldSnoopVlanRouterStaticPortlistList of router ports configured statically on this VLAN.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.5.1.11 |
rlIgmpMldSnoopVlanRouterForbiddenPortlistList of ports statically configured to NOT
be router ports on this VLANrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.5.1.12 |
rlIgmpMldSnoopVlanQueryOverrideEnable/Disable overriding of Query valuesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.5.1.13 |
rlIgmpMldSnoopVlanOperRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet losses.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.14 |
rlIgmpMldSnoopVlanOperQueryIntervalThe frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.15 |
rlIgmpMldSnoopVlanOperQueryMaxResponseTimeThe maximum query response interval advertised in MGMDv2
or v3 queries on this interface.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.16 |
rlIgmpMldSnoopVlanOperLastMemberQueryIntervalThe Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. This value
may be tuned to modify the leave latency of the network. A
reduced value results in reduced time to detect the loss of
the last member of a group. The value of this object is
irrelevant if mgmdRouterInterfaceVersion is 1.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.17 |
rlIgmpMldSnoopVlanOperLastMemberQueryCountRepresents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.18 |
rlIgmpMldSnoopVlanOperStartupQueryIntervalThis variable represents the interval between General
Queries sent by a Querier on startup.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.19 |
rlIgmpMldSnoopVlanOperStartupQueryCountRepresents the number of Queries sent out on startup
separated by the Startup Query Interval.ro Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.20 |
rlIgmpMldSnoopVlanOperHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval +
rlIgmpMldSnoopVlanOperQueryMaxResponseTime }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.21 |
rlIgmpMldSnoopVlanOperRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.22 |
rlIgmpMldSnoopVlanOperLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanOperLastMemberQueryCount *
rlIgmpMldSnoopVlanOperLastMemberQueryInterval }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.23 |
rlIgmpMldSnoopVlanAdminRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet losses.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.24 |
rlIgmpMldSnoopVlanAdminQueryIntervalThe frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.25 |
rlIgmpMldSnoopVlanAdminQueryMaxResponseTimeThe maximum query response interval advertised in MGMDv2
or v3 queries on this interface.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.26 |
rlIgmpMldSnoopVlanAdminLastMemberQueryIntervalThe Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. This value
may be tuned to modify the leave latency of the network. A
reduced value results in reduced time to detect the loss of
the last member of a group. The value of this object is
irrelevant if mgmdRouterInterfaceVersion is 1.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.27 |
rlIgmpMldSnoopVlanAdminLastMemberQueryCountRepresents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members. Value 0 is used to indicate
usage of default value. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness }rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.28 |
rlIgmpMldSnoopVlanAdminStartupQueryIntervalThis variable represents the interval between General
Queries sent by a Querier on startup.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.29 |
rlIgmpMldSnoopVlanAdminStartupQueryCountRepresents the number of Queries sent out on startup
separated by the Startup Query Interval.rw Unsigned32 .1.3.6.1.4.1.89.55.5.5.1.30 |
rlIgmpMldSnoopVlanAdminHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval +
rlIgmpMldSnoopVlanAdminQueryMaxResponseTime }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.31 |
rlIgmpMldSnoopVlanAdminRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.32 |
rlIgmpMldSnoopVlanAdminLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanAdminLastMemberQueryCount *
rlIgmpMldSnoopVlanAdminLastMemberQueryInterval }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.89.55.5.5.1.33 |
rlIgmpMldSnoopVlanIsImmediateLeaveEnable/Disable immediate leave on this Vlanrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.5.1.34 |
rlIgmpMldSnoopMulticastTvTablemulticast vlan used for this port SEQUENCE OF RlIgmpMldSnoopMulticastTvEntry .1.3.6.1.4.1.89.55.5.6 |
rlIgmpMldSnoopMulticastTvEntryentry of multicast ip RlIgmpMldSnoopMulticastTvEntry .1.3.6.1.4.1.89.55.5.6.1 |
rlIgmpMldSnoopMulticastTvInetAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.6.1.1 |
rlIgmpMldSnoopMulticastTvVIDSpecify the multicast ip to be used.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.6.1.2 |
rlIgmpMldSnoopMulticastTvGroupAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.6.1.3 |
rlIgmpMldSnoopMulticastTvGroupSpecify the multicast ip to be used.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.6.1.4 |
rlIgmpMldSnoopMulticastTvStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.6.1.5 |
rlMldSnoopQuerierVlanTableA table that contains MLD Snooping Querier information about
every vlan. This is indexed by vlan tag. SEQUENCE OF RlMldSnoopQuerierVlanEntry .1.3.6.1.4.1.89.55.5.7 |
rlMldSnoopQuerierVlanEntryAn entry (conceptual row) in the rlMldSnoopQuerierVlanTable. RlMldSnoopQuerierVlanEntry .1.3.6.1.4.1.89.55.5.7.1 |
rlMldSnoopQuerierVlanTagAn MLD Snoop Querier entry vlan tag.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.55.5.7.1.1 |
rlMldSnoopQuerierAdminEnableThe desired administrative state of MLD Snoop Querier on the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.7.1.2 |
rlMldSnoopQuerierOperEnableThe current operational state of MLD Snoop Querier on the vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.7.1.3 |
rlMldSnoopQuerierAdminAddrInetAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.7.1.4 |
rlMldSnoopQuerierAdminAddrThe desired IP address is being used in MLD Snoop Querier messages on the vlan.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.7.1.5 |
rlMldSnoopQuerierOperAddrInetAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.7.1.6 |
rlMldSnoopQuerierOperAddrThe current operational IP address is being used in MLD Snoop Querier messages on the vlan.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.7.1.7 |
rlMldSnoopQuerierAdminVersionNumberThe highest version number of MLD Snoop Querier for the vlan.rw MldVersion .1.3.6.1.4.1.89.55.5.7.1.8 |
rlMldSnoopQuerierOperVersionNumberThe current operational version number of MLD Snoop Querier for the vlan.ro MldVersion .1.3.6.1.4.1.89.55.5.7.1.9 |
rlMldSnoopQuerierElectionEnableWhether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another router on the vlan (always lose).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.7.1.10 |
rlMldSnoopQuerierEnableGlobally enable/disable MLD Snooping Querier in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.55.5.8 |
rlIgmpMldSnoopQuerierGlobalAddressTableA table that contains IGMP/MLD Snooping Querier global address. SEQUENCE OF RlIgmpMldSnoopQuerierGlobalAddressEntry .1.3.6.1.4.1.89.55.5.9 |
rlIgmpMldSnoopQuerierGlobalAddressEntryAn entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable. RlIgmpMldSnoopQuerierGlobalAddressEntry .1.3.6.1.4.1.89.55.5.9.1 |
rlIgmpMldSnoopQuerierGlobalAddressIPVersionThe IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g., IPv4
and IPv6; however, the traffic is considered to be logically
separate. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.9.1.1 |
rlIgmpMldSnoopQuerierGlobalAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.9.1.2 |
rlIgmpMldSnoopQuerierGlobalAddressThe desired address to used in IGMP/MLD Snoop Querier messages if
such an address is not configured on the vlan.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.55.5.9.1.3 |
More MIBs from Rnd
Browse all RndMIBs →RADLAN-MIB
Standard SNMP MIB module defining data structures for RADLAN-MIB.
651 objects→
RADWARE-MIB
Standard SNMP MIB module defining data structures for RADWARE-MIB.
604 objects→
RADLAN-IPV6FHS-MIB
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
498 objects→
RND-MIB
SNMP MIB module
487 objects→
Dell-QOS-CLI-MIB
SNMP MIB module
376 objects→
LINKSYS-POLICY-MIB
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.
369 objects→