Home/Catalog/RADLAN-STORMCTRL-MIB

RADLAN-STORMCTRL-MIB

AI MIB Summary

The RADLAN-STORMCTRL-MIB enables monitoring and configuration of broadcast, multicast, and unicast storm control thresholds on RADLAN network switches. It facilitates the detection of traffic storms by tracking packet drop rates and interface utilization against defined suppression limits to maintain network stability.

This private MIB module defines storm control private MIBs.

Main OID:

rlStormCtrl.1.3.6.1.4.1.89.77

Objects

Active

Status

Dependencies

Imported Objects

Objects

36 total

Object Name	Syntax	OID
rlStormCtrlThis private MIB module defines storm control private MIBs. MODULE-IDENTITY `.1.3.6.1.4.1.89.77`	MODULE-IDENTITY	`.1.3.6.1.4.1.89.77`
RADLAN-MIBThis private MIB module defines storm control private MIBs. Unknown `.1.3.6.1.4.1.89.77`	Unknown	`.1.3.6.1.4.1.89.77`
rlStormCtrlSupportIdentify if the strom control protection is supportedro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.1`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.1`
rlStormCtrlMibVersionMIB's version, the current version is 3.ro INTEGER `.1.3.6.1.4.1.89.77.2`	INTEGER	`.1.3.6.1.4.1.89.77.2`
rlStormCtrlRateUnitTypeSupportthe supported rate unit type for the storm rate controlro Bits `.1.3.6.1.4.1.89.77.3`	Bits	`.1.3.6.1.4.1.89.77.3`
rlStormCtrlTypeSupportthe supported frame type for the storm control protectionro Bits `.1.3.6.1.4.1.89.77.4`	Bits	`.1.3.6.1.4.1.89.77.4`
rlStormCtrlRateSupportPerTypeidentify if rate control is supported for each frame typero Bits `.1.3.6.1.4.1.89.77.5`	Bits	`.1.3.6.1.4.1.89.77.5`
rlStormCtrlEnbaleDependencyBetweenTypesindicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632)ro Bits `.1.3.6.1.4.1.89.77.6`	Bits	`.1.3.6.1.4.1.89.77.6`
rlStormCtrlRateDependencyBetweenTypesindicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate for multicast and bradcast frame (bcm 5615), in case the device support enbale per each frame type but with the same rate limitation.ro Bits `.1.3.6.1.4.1.89.77.7`	Bits	`.1.3.6.1.4.1.89.77.7`
rlStormCtrlTableThe table contains the storm control protection per port SEQUENCE OF RlStormCtrlEntry `.1.3.6.1.4.1.89.77.8`	SEQUENCE OF RlStormCtrlEntry	`.1.3.6.1.4.1.89.77.8`
rlStormCtrlEntrystorm control protection, defined per port,frame type and rate RlStormCtrlEntry `.1.3.6.1.4.1.89.77.8.1`	RlStormCtrlEntry	`.1.3.6.1.4.1.89.77.8.1`
rlStormCtrlRateTypeindicate the rate unit typerw RlStormCtrlRateUnit `.1.3.6.1.4.1.89.77.8.1.1`	RlStormCtrlRateUnit	`.1.3.6.1.4.1.89.77.8.1.1`
rlStormCtrlUnknownUnicastEnableenable or disable the storm control for unknown unicast framesrw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.2`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.2`
rlStormCtrlUnknownUnicastRateset the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 `.1.3.6.1.4.1.89.77.8.1.3`	Unsigned32	`.1.3.6.1.4.1.89.77.8.1.3`
rlStormCtrlUnknownMulticastEnableenable or disable the storm control for unknown multicast framesrw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.4`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.4`
rlStormCtrlUnknownMulticastRateset the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 `.1.3.6.1.4.1.89.77.8.1.5`	Unsigned32	`.1.3.6.1.4.1.89.77.8.1.5`
rlStormCtrlBroadcastEnableenable or disable the storm control for Broadcast framesrw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.6`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.6`
rlStormCtrlBroadcastRateset the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type.rw Unsigned32 `.1.3.6.1.4.1.89.77.8.1.7`	Unsigned32	`.1.3.6.1.4.1.89.77.8.1.7`
rlStormCtrlMulticastEnableenable or disable the storm control for multicast framesrw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.8`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.8`
rlStormCtrlMulticastRateset the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 `.1.3.6.1.4.1.89.77.8.1.9`	Unsigned32	`.1.3.6.1.4.1.89.77.8.1.9`
rlStormCtrlSetDefaultRateTypeindicate if return the rate unit type to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.10`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.10`
rlStormCtrlSetDefaultUnknownUnicastEnableindicate if return the storm control enable for unknown unicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.11`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.11`
rlStormCtrlSetDefaultUnknownUnicastRateindicate if return the storm control rate limit for the unknown unicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.12`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.12`
rlStormCtrlSetDefaultUnknownMulticastEnableindicate if return the storm control enable for unknown multicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.13`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.13`
rlStormCtrlSetDefaultUnknownMulticastRateindicate if return the storm control rate limit for the unknown multicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.14`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.14`
rlStormCtrlSetDefaultBroadcastEnableindicate if return the storm control enable for Broadcast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.15`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.15`
rlStormCtrlSetDefaultBroadcastRateindicate if return the storm control rate limit for the Broadcast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.16`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.16`
rlStormCtrlSetDefaultMulticastEnableindicate if return the storm control for multicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.17`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.17`
rlStormCtrlSetDefaultMulticastRateindicate if return the storm control rate limit for the multicast frames to its default.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.77.8.1.18`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.77.8.1.18`
rlStormCtrlBroadcastOperRateOperative storm control rate limit for the Broadcast frames. The value will be 0 if rlStormCtrlRateType is not from type precentages.ro Unsigned32 `.1.3.6.1.4.1.89.77.8.1.19`	Unsigned32	`.1.3.6.1.4.1.89.77.8.1.19`
rlStormCtrlGroupTableThe table contains per port for each supported frame type to which group it belongs. SEQUENCE OF RlStormCtrlGroupEntry `.1.3.6.1.4.1.89.77.9`	SEQUENCE OF RlStormCtrlGroupEntry	`.1.3.6.1.4.1.89.77.9`
rlStormCtrlGroupEntrygroup id for each supported frame type defined per port. RlStormCtrlGroupEntry `.1.3.6.1.4.1.89.77.9.1`	RlStormCtrlGroupEntry	`.1.3.6.1.4.1.89.77.9.1`
rlStormCtrlGroupUnknownUnicastIdIndicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported.ro INTEGER `.1.3.6.1.4.1.89.77.9.1.1`	INTEGER	`.1.3.6.1.4.1.89.77.9.1.1`
rlStormCtrlGroupUnknownMulticastIdIndicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported.ro INTEGER `.1.3.6.1.4.1.89.77.9.1.2`	INTEGER	`.1.3.6.1.4.1.89.77.9.1.2`
rlStormCtrlGroupBroadcastIdIndicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported.ro INTEGER `.1.3.6.1.4.1.89.77.9.1.3`	INTEGER	`.1.3.6.1.4.1.89.77.9.1.3`
rlStormCtrlGroupMulticastIdIndicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported.ro INTEGER `.1.3.6.1.4.1.89.77.9.1.4`	INTEGER	`.1.3.6.1.4.1.89.77.9.1.4`