RADLAN-SMON-MIB
The RADLAN-SMON-MIB enables monitoring of switch port statistics and traffic flow metrics on RADLAN network devices via the Switched Port Analyzer (SPMON) protocol. It provides access to interface counters, packet drop rates, and bandwidth utilization data for performance analysis and fault isolation.
Imported Objects
Objects
9 total| Object Name |
|---|
rlSmonThis private MIB module defines SMON private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.89.84 |
RADLAN-MIBcopy destination mode type:
1- monitor-only
2- network. Enumeration .1.3.6.1.4.1.89.84 |
rlPortCopyMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.84.1 |
rlPortCopySupportsupported - The standard portCopy is supported.
notSupported - the standard portCopy is not supported.
only basic portCopy operation is supported.ro Enumeration .1.3.6.1.4.1.89.84.2 |
rlPortCopyVlanTaggingTableA supplementing table for portCopyTable.
For every portCopyDest a vlan-tagging option is available. SEQUENCE OF RlPortCopyVlanTaggingEntry .1.3.6.1.4.1.89.84.3 |
rlPortCopyVlanTaggingEntryEach entry specify how mirrored packets will transmit from
the portCopyDest: Tagged or unTagged.
The values in this entry will be valid only when the
dot1dBasePort will be configured as a portCopyDest
in the portCopyTable. RlPortCopyVlanTaggingEntry .1.3.6.1.4.1.89.84.3.1 |
rlPortCopyVlanTaggingTRUE - Mirrored packets will transmit from portCopyDest - Tagged
FALSE - Mirrored packets will transmit from portCopyDest - unTaggedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.84.3.1.1 |
rlPortCopyModeThis scalar defines a mode of the copy
destination portrw CopyModeType .1.3.6.1.4.1.89.84.4 |
rlPortCopySessionsEnabledThis scalar enables globaly port monitoring sessionsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.84.5 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.